Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “ALKALIES”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36Linked to original sources

Facile Synthesis and Structure of Heavy Alkali Metal Thiocarboxylates: Structural Comparison with the Selenium and Tellurium Isologues.

Potassium, rubidium, and cesium thiocarboxylates were found to be synthesized by the reaction of thiocarboxylic acid or its O-trimethylsilyl esters with KF, RbF, and CsF. Tetramethylammonium thiocarboxylates were prepared in good yields by the reaction of sodium thiocarboxylates with tetramethylammonium chloride. The structures of potassium benzene-, 2-methoxybenzene-, and 4-methoxybenzenecarbothioates, rubidium 2-methoxybenzenecarbothioate, tetramethylammonium 2-methoxy- and 2-trifluoromethylbenzenecarbothioates, potassium 2-methoxybenzenecarboselenoate, and rubidium 2-methoxybenzenecarbotelluroate were characterized by X-ray structural analysis. All of these alkali metal salts exhibit a dimeric structure in which the oxygen and/or sulfur atom is associated with the metal of the opposite molecule, while the tetramethylammonium thiocarboxylates are monomeric. In potassium 2-methoxybenzenecarbothioate, the two thiocarboxylate groups chelate to the potassium atoms above and below the plane which involves the thiocarboxylate groups. In potassium 4-methoxybenzenecarbothioate, one thiocarboxylate group chelates to potassium. Without exception, the o-methoxy oxygen intermolecularly coordinates to the metal of the opposite molecule. The C-O bond lengths of the thiocarboxylate group are in the range 1.22-1.24 Å, which is slightly longer than those of common thioesters. The C(sp(2))-S distances are in the range 1.70-1.72 Å, which is close to that of a typical C-S single bond and suggests that the negative charge may be somewhat localized on the sulfur atom. The interaction number of the metals with oxygen and sulfur atoms was 7 for K and 8 for both Rb and Cs. The dihedral angle between the thiocarboxyl group and the phenyl ring is substantially increased by the introduction of the o-methoxy group. In these alkali metal thio-, seleno-, and tellurocarboxylates, only cesium 2-methoxybenzenecarbotelluroate showed an intermolecular nonbonding interaction between the cesium and the phenyl ring carbons.

Journal Article↗

Blue alkali dinitrosomethanides: synthesis, structure, and bonding.

Explosive alkali dinitrosomethanides (M[HC(NO)2]; M = Li, Na, K, Cs) were prepared in a new, simple, high-yielding synthetic procedure, fully characterized, and shown to be stable at ambient temperature. Alkali dinitrosomethanides are of widespread interest to pharmaceutical and materials scientists alike.

Journal Article↗

Probing the location and distribution of paramagnetic centers in alkali metal-loaded zeolites through (7)Li MAS NMR.

The nature and surroundings of lithium cations in lithium-exchanged X and A zeolites following loading with the alkali metals Na, K, Rb, and Cs have been studied through (7)Li solid-state NMR spectroscopy. It is demonstrated that the lithium in these zeolites is stable with respect to reduction by the other alkali metals. Even though the lithium cations are not directly involved in chemical interactions with the excess electrons introduced in the doping process, the corresponding (7)Li NMR spectra are extremely sensitive to paramagnetic species that are located inside the zeolite cavities. This sensitivity makes (7)Li NMR a useful probe to study the formation, distribution, and transformation of such species.

Journal Article↗

Crystallographic distinction between "contact" and "separated" ion pairs: structural effects on electronic/ESR spectra of alkali-metal nitrobenzenides.

The classic nitrobenzene anion-radical (NB(-*) or nitrobenzenide) is isolated for the first time as pure crystalline alkali-metal salts. The deliberate use of the supporting ligands 18-crown-6 and [2.2.2]cryptand allows the selective formation of contact ion pairs designated as (crown)M(+)NB(-*), where M(+) = K(+), Rb(+), and Cs(+), as well as the separated ion pair K(cryptand)(+)NB(-*)-both series of which are structurally characterized by precise low-temperature X-ray crystallography, ESR analysis, and UV-vis spectroscopy. The unusually delocalized structure of NB(-*) in the separated ion pair follows from the drastically shortened N-C bond and marked quinonoidal distortion of the benzenoid ring to signify complete (95%) electronic conjugation with the nitro substituent. On the other hand, the formation of contact ion pairs results in the substantial decrease of electronic conjugation in inverse order with cation size (K(+) > Rb(+)) owing to increased localization of negative charge from partial (NO(2)) bonding to the alkali-metal cation. Such a loss in electronic conjugation (or reverse charge transfer) may be counterintuitive, but it is in agreement with the distribution of odd-electron spin electron density from the ESR data and with the hypsochromic shift of the characteristic absorption band in the electronic spectra. Most importantly, this crystallographic study underscores the importance of ion-pair structure on the intrinsic property (and thus reactivity) of the component ions-as focused here on the nitrobenzenide anion.

Journal Article↗

A joint experimental and theoretical study of cation-pi interactions: multiple-decker sandwich complexes of ferrocene with alkali metal ions (Li+, Na+, K+, Rb+, Cs+).

A systematic study of cation-pi interactions between alkali metal ions and the cyclopentadienyl ring of ferrocene is presented. The alkali metal (Li+, Na+, K+, Rb+, Cs+) salts of the ditopic mono(pyrazol-1-yl)borate ligand [1,1'-fc(BMe2pz)2]2- crystallize from dimethoxyethane as multiple-decker sandwich complexes with the M+ ions bound to the pi faces of the ferrocene cyclopentadienyl rings in an eta5 manner (fc = (C5H4)2Fe; pz = pyrazolyl). X-ray crystallography of the lithium complex reveals discrete trimetallic entities with each lithium ion being coordinated by only one cyclopentadienyl ring. The sodium salt forms polyanionic zigzag chains where each Na+ ion bridges the cyclopentadienyl rings of two ferrocene moieties. Linear columns [-CpR-Fe-CpR-M+-CpR-Fe-CpR-M+-](infinity) (R = [-BMe2pz]-) are established by the K+, Rb+, and Cs+ derivatives in the solid state. According to DFT calculations, the binding enthalpies of M+-eta5(ferrocene) model complexes are about 20% higher as compared to the corresponding M+-eta6(benzene) aggregates when M+ = Li+ or Na+. For K+ and Rb+, the degree of cation-pi interaction with both aromatics is about the same. The binding sequence along the M+-eta5(ferrocene) series follows a classical electrostatic trend with the smaller ions being more tightly bound.

Journal Article↗

Alkali metals plus silica gel: powerful reducing agents and convenient hydrogen sources.

Alkali metals absorbed into silica gel yield three stages of unique loose black powders (M-SG) that are strong reducing agents. All react nearly quantitatively with water to form hydrogen. Liquid Na-K alloys form air-sensitive powders at room temperature that can be converted at 150 degrees C to a form that is sensitive to moisture but not to dry air. Slowly heating sodium and silica gel to 400 degrees C yields a third type that can be handled in ambient air with only slow degradation by atmospheric moisture. These materials eliminate many hazards associated with pure alkali metals and provide easily handled reducing agents and hydrogen sources. They could be used in continuous-flow reactors to reduce and protonate aromatics, dechlorinate alkyl and aryl halides, and desulfurize various compounds.

Journal Article↗

A halogen-bonding-based heteroditopic receptor for alkali metal halides.

A new heteroditopic receptor for alkali metal halides has been designed and synthesized. It is comprised of a well-established motif for cation binding and a motif for halogen-bonding-based anion recognition processes. The single-crystal X-ray structure of the complex between the heteroditopic receptor and sodium iodide is reported. Thanks to the cooperativity of metal coordination and the strong I-...I halogen bonding, the ion pair is fully separated. The boosting effect of the binding of the anion through halogen bonding on the coordination of the cation by the receptor has been proved also in solution by NMR experiments. The selectivity of the new heterotopic receptor toward different alkali metal halides has been tested by ESI mass experiments.

Journal Article↗

Alkali-metal-mediated zincation of anisole: synthesis and structures of three instructive ortho-zincated complexes.

The new concept of alkali-metal-mediated zincation (AMMZ), formally a zinc-hydrogen exchange reaction but one that requires the participation of an alkali metal, is applied here to the alkyl aryl ether anisole, an important molecule for studying directed ortho-metalation (DoM) chemistry. Treating one molar equivalent of anisole with the lithium dialkyl-TMP zincate reagent [THF.Li(mu-TMP)(mu-tBu)Zn(tBu)] (1) in hexane solution affords the mono-ortho-zincated complex [THF.Li(mu-TMP)(mu-o-C6H4OMe)Zn(tBu)] (2), which establishes that 1 functions as an alkyl base although previously it was regarded as an amido (TMP) base in other DoM applications. Treating two molar equivalents of anisole with 1, and increasing the reaction time, affords the bis-ortho-zincated complex [THF.Li(mu-TMP)(mu-o-C6H4OMe)Zn(o-C6H4OMe)] (3), which establishes that 1 can also function as a dual alkyl base. Omitting THF and rerunning the reaction with one or two molar equivalents of anisole affords [Ph(Me)O.Li(mu-TMP)(mu-o-C6H4OMe)Zn(tBu)] (4), which remarkably contains a combination of neutral and ortho-deprotonated anisole ligands. On isolating crystalline 4 from solution and adding THF, it converts to 2 and then to 3 on further stirring of the solution, as determined by NMR studies. This fact, along with other observations, would suggest that a complex-induced proximity effect does not need to be invoked to explain the observed zincation of anisole. The crystal structures of 2-4 are presented, as are their 1H, 13C, and 7Li NMR spectra recorded in C6D6 solution.

Journal Article↗

Fractional and structural characterization of lignins isolated by alkali and alkaline peroxide from barley straw.

A sequential treatment of dewaxed barley straw with sodium hydroxide, different concentrations of hydrogen peroxide, and potassium hydroxide/sodium borate degraded various proportions of the original lignin and solubilized different amounts of the original hemicelluloses. The isolated lignin fractions were subjected to comprehensive structural characterization by UV, FT-IR, and (13)C NMR spectroscopy, and their chemical compositions were analyzed by alkaline nitrobenzene oxidation. All of the lignin fractions were typical of grass lignins and had weight-average molecular weights between 1750 and 2190. It was found that the peroxide treatment at low concentrations (< or =2.0%) resulted in a slight increase in the amount of carboxyl groups, whereas the treatment at a relatively high concentration of alkaline peroxide, such as at 3.0% H(2)O(2), led to a noticeable oxidation of the lignins, as shown by an increase of carboxyl groups. Moreover, the results obtained indicated that the successive treatments with alkali and alkaline peroxide under the conditions used did not significantly affect the beta-O-4 structures of lignins. Substantial amounts of etherified ferulic acids were cleaved by the sequential treatments with alkaline peroxide, as shown in the (13)C NMR spectra. The results underscore the structural differences between alkali- and alkaline peroxide-soluble lignins from barley straw.

Hordeum↗

Changes of amino acid composition and lysinoalanine formation in alkali-pickled duck eggs.

Duck eggs were pickled in alkali for 20 days to prepare Pidan. The extent of the degradation of compositional amino acids, the formation of lysinoalanine (LAL) in Pidan, and the relationship between the formation of LAL and the racemization values of D-serine and D-aspartic acid in Pidan albumen during the pickling period were investigated. Results showed that the remaining percentages of Cys, Arg, Lys, Ser, and Thr in albumen were much lower than that of the corresponding amino acid in yolk. The formation of LAL in albumen in the first stage was due to the speedy increase in the pH and the abundant formation of dehydroalanine (DHA) from cysteine. However, the formation of LAL in the later pickling period was related much more to the alkali-treating time than to the pH factor. Among the amino acids, cysteine was observed to be the most sensitive to alkaline and contributed mostly to the formation of LAL throughout the pickling period.

Amino Acids↗

Synthesis of double-armed lariat ethers with pyrene moieties at each end of two sidearms and their fluorescence properties in the presence of alkali metal and alkaline earth metal cations.

Two types of double-armed lariat ether derivatives having pyrene moieties at each end of two sidearms, (3x + 1)-crown-x derivatives 1 (x = 5), 2 (x = 6), and 3 (x = 4) (type A) and 3y-crown-y derivatives, 6 (y = 5) and 7 (y = 6) (type B), were synthesized, and their complexation behavior toward alkali metal and alkaline earth metal cations was examined by fluorescence spectroscopy. Pyrene excimer emission decreased accompanied by an increase in monomer emission upon metal ion complexation. This finding is ascribed to the change of the spatial distance of two pyrene rings by movement suppression of both the crown ring and one of the two sidearms based on complexation with the metal cation. The selectivity for alkaline earth metal cations was highly dependent on the fitness of the host cavity and the guest size. Although most of the fluorophores did not respond to alkali metal cations, only trans-7a containing an 18-crown-6 ring showed K(+) selectivity.

Journal Article↗

Calix[4]quinones derived from double calix[4]arenes: synthesis, complexation, and electrochemical properties toward alkali metal ions.

Bis(calix[4]diquinones) 1 and 2 and double calix[4]diquinone 3 have been synthesized from their corresponding double calix[4]arenes 4, 5, and 6, respectively. Compounds 4-6 have been prepared from one-pot and stepwise syntheses under high pressure. Complexation studies of ligands 1-3 with alkali metal ions such as Li+, Na+, K+, and Cs+ were carried out by 1H NMR titrations. Receptors 1 can selectively form 1:1 complexes with Na+. Ligand 2 prefers to form 1:1 complexes with K+ and Cs+. Receptor 3 retained the cone conformation of the calix[4]arene unit upon binding K+ but changed the conformation when complexing Li+ and Na+. Electrochemical studies using cyclic voltammetry and square wave voltammetry showed significant changing of voltammograms of 2 and 3 in the presence of alkali metal ions. Receptor 3 showed the electrochemically switched binding property toward Na+ and K+.

Journal Article↗

An ab Initio Study of Some Phenyl- and (Halophenyl)alkali Compounds.

Ab initio calculations are presented for alkali metal derivatives of fluoro- and chlorobenzenes for comparison with previously determined experimental substitutent effects. Calculated substituent effects for one alkali metal are linearly related to those of another. (Difluorophenyl)lithiums show additivity of substituent effects calculated from (monofluorophenyl)lithiums but dichloro derivatives do not, an effect attributed to the higher polarizability of chlorine. meta- and para-fluoro substituents show excellent agreement with experiment. ortho-fluoro and chlorine substituents do not. These differences are rationalized.

Journal Article↗

Molecular Design of C-Pivot Tripodal Ligands: Importance of the Glycerol Structure for Effective Complexation toward Alkali Metal Cations.

A new series of C-pivot tripodal ligands 1-4 containing a 2-methylglycerol unit were prepared and their complexation properties toward alkali metal cations were examined by measuring the extractability, stability constant in THF, characteristic absorption in the UV spectrum, change in the chemical shift in the (1)H NMR, and competitive passive transport. This type of compound (1-4) was found to possess excellent complexing ability and higher selectivity than another type of tripodal ligand 5 derived from tris(hydroxymethyl)ethane. This remarkable difference in the stability constants was reasonably explained by considering that the former takes a three-dimensional coordination toward alkali metal cations by cooperatively using the three electron-donating arms but the latter does not. This finding clearly shows that a proper selection of the structure of the basic skeleton is important for the molecular design of C-pivot tripodal ligands.

Journal Article↗

Competing non-covalent interactions in alkali metal ion-acetonitrile-water clusters.

Competitive ion-dipole, ion-water, and water-water interactions were investigated at the molecular level in M+ (CH3CN)n(H2O)m cluster ions for M = Na and K. Different [n,m] combinations for two different n + m cluster sizes were characterized with infrared predissociation spectroscopy in the O-H stretch region and MP2 calculations. In all cases, no differences were observed between the two alkali metal ions. The results showed that at the n + m = 4 cluster size, the solvent molecules interact only with the ion, and that the interaction between the ion and the large dipole moment of CH3CN decreases the ion-water electrostatic interactions. At the n + m = 5 cluster size, at least two different hydrogen-bonded structures were identified. In these structures, the ion-dipole interaction weakens the ability of the ion to polarize the hydrogen bonds and thus decreases the strength of the water-water interactions in the immediate vicinity of the alkali metal ion.

Acetonitriles↗

Positron binding energies for alkali hydrides.

Ab initio multireference single- and double-excitation configuration interaction (MRD-CI) calculations are carried out to study the interactions of positrons with the members of the alkali hydride class of molecules. A new computer program has been constructed for this purpose that makes use of the Table-Direct-CI method for construction of the required Hamiltonian matrixes and electronic/positronic wave functions. The calculations indicate that the binding energy (positron affinity PA) of a single positron to these systems increases by an increment of 0.2-0.3 eV as the atomic number of the alkali atom is increased. It is found that the positron prefers a location in the more electronegative regions of such molecules, similarly as has been found in earlier calculations for the urea and acetone molecules. The positron orbital itself possesses a diffuse charge distribution with relatively small expectation values of the kinetic energy in all four systems considered. Each of the four positronic molecules is stable with respect to formation of either positronium (Ps) or HPs according to the present calculations. Relatively large changes in the equilibrium bond distance of the hydrides occur as a result of the positron interaction. The importance of bond dipole moments in producing the binding of positrons to molecules is discussed, as well as the role that the electronegativity of the constituent atoms plays in determining the magnitude of the PA for a given system.

Journal Article↗

Experimental and theoretical study of the vibrational spectra of 12-crown-4-alkali metal cation complexes.

The vibrational, Raman, and IR, spectra of the five 12-crown-4 (12c4) complexes with Li+, Na+, K+, Rb+, and Cs+ alkali metal cations were measured. Except for a small shift of the position of some bands in the vibrational spectra of the Li+ complex, the vibrational spectra of the five complexes are so similar that it is concluded that the five complexes exist in the same conformation. B3LYP/6-31+G* force fields were calculated for six of the eight predicted conformations in a previous report (J. Phys. Chem. A 2005, 109, 8041) of the 12c4-Li+, Na+, and K+ complexes that are of symmetries higher than the C1 symmetry. These six conformations, in energy order, are of C4, Cs, Cs, C(2v), C(2v), and Cs symmetries. Comparison between the experimental and calculated vibrational frequencies assuming any of the above-mentioned six conformations shows that the five complexes exist in the C4 conformation. This agrees with the fact that the five alkali metal cations are larger than the 12c4 ring cavity. The B3LYP/6-31+G* force fields of the C4 conformation of the Li+, Na+ and K+ complexes were scaled using a set of eight scale factors and the scale factors were varied so as to minimize the difference between the calculated and experimental vibrational frequencies. The root-mean-square (rms) deviations of the calculated frequencies from the experimental frequencies were 7.7, 5.6, and 5.1 cm(-1) for the Li+, Na+, and K+ complexes, respectively. To account for the earlier results of the Li+ complex that the Cs conformation is more stable than the C4 conformation by 0.16 kcal/mol at the MP2/6-31+G* level, optimized geometries of the complex were calculated for the C4 and Cs conformations at the MP2/6-311++G** level. The C4 conformation was calculated to be more stable than the Cs conformation by 0.13 kcal/mol.

Journal Article↗

Structural and dynamic properties of concentrated alkali halide solutions: a molecular dynamics simulation study.

The physicochemical properties of alkali halide solutions have long been attributed to the collective interactions between ions and water molecules in the solution, yet the structure of water in these systems and its effect on the equilibrium and dynamic properties of these systems are not clearly understood. Here, we present a systematic view of water structure in concentrated alkali halide solutions using molecular dynamics simulations. The results of the simulations show that the size of univalent ions in the solution has a significant effect on the dynamics of ions and other transport properties such as the viscosity that are correlated with the structural properties of water in aqueous ionic solution. Small cations (e.g., Li+) form electrostatically stabilized hydrophilic hydration shells that are different from the hydration shells of large ions (e.g., Cs+) which behave more like neutral hydrophobic particles, encapsulated by hydrogen-bonded hydration cages. The properties of solutions with different types of ion solvation change in different ways as the ion concentration increases. Examples of this are the diffusion coefficients of the ions and the viscosities of solutions. In this paper we use molecular dynamics (MD) simulations to study the changes in the equilibrium and transport properties of LiCl, RbCl, and CsI solutions at concentrations from 0.22 to 3.97 M.

Journal Article↗