Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “root”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35Linked to original sources

Flavonoids induce Rhizobium leguminosarum to produce nodDABC gene-related factors that cause thick, short roots and root hair responses on common vetch.

Rhizobium leguminosarum produced a factor(s) that caused thick, short roots (Tsr phenotype) as well as root hair induction (Hai phenotype) and deformation (Had phenotype) in Vicia sativa plants upon incubation with root exudate or with one of the nod gene inducers naringenin or apigenin; this was a nodDABC gene-dependent process. Detection of the Hai and Had phenotypes was much more sensitive than that of the Tsr phenotype.

Fabaceae↗

[Studies on the constituents of trichosanthes root. III. Constituents of roots of Trichosanthes bracteata Voigt].

From the fresh roots of Trichosanthes bracteata Voigt., the following substances were identified: methyl palmitate, palmitic acid, suberic acid, alpha-spinasterol, stigmast-7-en-3 beta-ol, alpha-spinasterol 3-O-beta-D-glucopyranoside, stigmast-7-en-3 beta-ol 3-O-beta-D-glucopyranoside, glyceryl 1-palmitate, glyceryl 1-stearate, bryonolic acid, cucurbitacin B, isocucurbitacin B, 3-epi-isocucurbitacin B, 23,24-dihydrocucurbitacin B, 23,24-dihydroisocucurbitacin B, 23,24-dihydro-3-epi-isocucurbitacin B, cucurbitacin D, isocucurbitacin D and D-glucose. This root contains more than 6 times cucurbitacin of the root of T. kirilowii Maxim. var. japonicum Kitam.

Chemical Phenomena↗

[Studies on the constituents of "Trichosanthes root". IV. Constituents of roots of Trichosanthes multiloba Miq., Trichosanthes miyagii Hay. and Chinese crude drug "karo-kon"].

A mixture of alpha-spinasterol, stigmast-7-en-3-beta-ol (1) and its 3-O-beta-D-glucopyranoside (2), bryonolic acid (3), 23,24-dihydrocucurbitacin B (4), cucurbitacin B (5), cucurbitacin D (6) were obtained from the fresh roots of Trichosanthes multiloba Miq. (Cucurbitaceae). 1, 2, 4, 5 and 6 were also obtained from the fresh roots of Trichosanthes miyagii Hay. From the chinese crude drug "Karo-Kon", which was considered to be prepared from the roots of Trichosanthes kirilowii Maxim., 1, 2 and 3 were provided.

Chromatography↗

[Aortic root reconstruction in the patient with aortic root dissection and aortic valve regurgitation: a case report].

The reported patient was a 60-year-old man with congestive heart failure and recurrent inferior myocardial infarction. The aortogram revealed severe aortic regurgitation, aortic root dilatation and dissection with involvement of the right coronary ostium. Aortic root reconstruction using the valved conduit was performed. The left coronary ostium was reimplanted with Carrel patch method and the right coronary artery was bypassed with the saphenous vein graft. Postoperative course was uneventful and he is asymptomatic in one year after operation. Although aortic root reconstruction with Carrel patch procedure is not widely adopted in Japan, we recommend this procedure because the anastomosis between the coronary ostium and the graft is tight.

Aortic Dissection↗

[Analysis the effect on the stress of wall of root canal by different proportion between crown and root].

OBJECTIVE: Use FEM to observe the relationship between the change of alveolar ridge's height and the stress change of wall of root canal. METHODS: Modify the model on the basis of the set up model of the mandibular first molar, simulating the height of alveolar ridge and reducing 1/4, 1/3, 1/2 of the height to set up modified model, and load on the modified model by vertical and lateral forces. Then calculate the maximum mises stress of each part of teeth and wall of root canal. RESULTS: The stress-changing tendency of each part of wall was similar to the changing tendency of each part of teeth, but the stress of wall was fewer than the stress of teeth. The stress value of original model was close to the modified model at the orifice. Then the stress of original model obviously reduced, and the stress of the modified model reached maximum in the coronal thirds, and when the fixed height was lower, the stress was larger, the stress reduced more slowly. The lateral stress was larger than the vertical stress, and when the fixed height was lower, the difference was more obvious. CONCLUSION: The change of alveolar ridge's height will affect the stress change of wall of root canal, and which is in an inverse proportion.

English Abstract↗

[Valve-sparing aortic root replacement in patients with aortic root disease].

OBJECTIVE: To review the results of the valve-sparing operation (David procedure) in patients with aortic root disease. METHODS: Twenty-nine patients with aortic root disease, 20 males and 9 females, aged 39 +/- 17 (10-64), 10 being of heart functional class I, 15 of class II, and 4 of class III, and 15 with gentle, 9 with moderate, and 5 with severe aortic insufficiency underwent David procedure, one undergoing the aortic valve-sparing reimplantation (David I), 25 undergoing aortic valve-sparing remodeling (David II), and 3 undergoing a new modified aortic valve-sparing operation. After the operation the patients were followed up for 29 +/- 15 months (5-74 months). RESULTS: No intra-operative death was found. The mean extracorporeal circulation time was 126 min +/- 25 min, and the aortic crossclamp time was 87 min +/- 22 min. All patients recovered to heart functional class I. Post-operatively 11 patients showed no normal, eight gently and two moderate aortic regurgitation. CONCLUSION: The valve-sparing operation is an ideal operation to the aortic root aneurysm with more or less normal aortic leaflets and valvular ring normal.

Adolescent↗

Cervical nerve root transfer from contralateral normal side for treatment of brachial plexus root avulsions.

The authors had designed cervical root nerve transfer from the contralateral normal side for the treatment of brachial plexus root avulsions in August 1986. Since then, the operation was performed in 50 cases. Follow-up studies showed that resection of C-7 root from the healthy side produced no long-term ill effect except numbness and pain of the fingers and weakness of gripping strength shortly after the procedure. In 10 recipient nerves of 9 cases with follow-ups of more than 2 years, satisfactory results were seen in 7. This is a new approach for the treatment of persistent cases of brachial plexus avulsion.

Adolescent↗

Process of infection of the root system of the pea by root nodule bacteria in the presence of straw.

The application of straw enhances the process of formation of specifically distorted root hairs with a primary focus of infection in 8--9 day old pea plants inoculated with bacteria, but somewhat retards the process of formation of infective filaments in such root hairs. On the 13th to 15th day the number of these and other root hairs in the variant in which straw has been applied is considerably higher than in the absence of straw. This is correlated with the number and weight of nodules formed.

Fabaceae↗

Coronal leakage of teeth root-filled with gutta-percha or Resilon root canal filling material.

This study compared the micro-leakage of a root canal filled with Resilon or gutta-percha (GP), utilizing either cold lateral condensation or System B. Four experimental groups were used. Group one was obturated with GP using cold lateral condensation, group two with GP using System B, group three with Resilon using cold lateral condensation, and group four with Resilon using System B. Micro-leakage was tested using a two-chamber bacterial method as well as a dye penetration test. Data was subjected to statistical analysis using an ANOVA. A p-value <0.05 was considered as significant. The bacterial micro-leakage test showed no significant difference between GP and Resilon when using Cold Lateral condensation (p = 0.2695) or System B (p = 0.5602). The dye penetration test also showed no significant difference between GP and Resilon using either the Cold Lateral condensation (p = 0.2713) or the System B techniques (p = 0.0767). The ability of GP and Resilon to seal a root canal is similar.

Analysis of Variance↗

The standardized-taper root canal preparation--Part 4. GT file technique in large root canals with large apical diameters.

AIM: To describe the GT file shaping steps required to create apical resistance in the presence of a wide root apex. SUMMARY: Canals are occasionally encountered with apices wider than 0.25 mm. These can be some of the most difficult to manage with conventional instruments, and overfills are common. Shaping such canals with GT files requires a paradigm shift of thinking, extending tapered files through the apex to create linear resistance in the apical few mm of the canal. GT standard and accessory files allow canals with apices up to around 0.7 mm to be prepared for tapered gutta percha cone-fit. Apices larger than this should be considered too large for further shaping, and repaired with MTA before filling. KEY LEARNING POINTS: Tapered apical preparations offer optimal resistance form for obturation. Tapered apical preparations can be prepared in most roots with wide apices by extending GT files and GT accessory files to or through the apex. Apices wider than 0.7 mm should be repaired with MTA prior to filling.

Aluminum Compounds↗

Stress analysis of human tooth root using various root canal instruments.

This study compared external root stresses from instrumentation by several motor-driven nickel-titanium instruments to stresses developed by hand files. Twelve curved first molar mesial roots were invested in PLM-9 photoelastic material to disclose net stress transmitted from the canal through the dentin. Minimal fringe patterns were observed during instrumentation with all techniques. Light-speed yielded the least change. In no case was a complete 60 psi fringe change noted.

Birefringence↗

Root surface temperature rises in vitro during root canal obturation using hybrid and microseal techniques.

The aim of this in vitro study was to measure the temperature rise on the outer surface of roots during filling with hybrid technique and Microseal. Twenty extracted human maxillary and mandibular premolars with a single canal were randomly divided into two groups of 10 teeth each. In the first group, the teeth were filled with hybrid technique (thermomechanical compaction with Engine Plugger used following lateral condensation of the apical part of the canal), the second group was filled using Microseal. After root canal obturation the filling material was removed and the obturation procedure was repeated. A total of 20 obturations in each group were performed. Temperature changes were measured using a thermal imaging camera. The temperature of certain regions of the mesial surface was analyzed and the highest temperature values were recorded. Statistical analysis was performed using the Mann-Whitney U test. The mean increase of temperature during the hybrid technique with Engine Plugger was 23.8 degrees C, while during Microseal it was significantly lower (p = 0.000001) at 5.5 degrees C. The temperature rise generated by Microseal was below the critical level and should not damage supporting structures, however, the hybrid technique generated a relatively high temperature rise that may cause periodontal tissue damage.

Bicuspid↗

Effect of root canal size and external root surface morphology on fracture susceptibility and pattern: a finite element analysis.

The aim of the study was to determine the extent to which canal size, radius of curvature and proximal root concavity influence fracture susceptibility and pattern. A standardized cross-section of the mid-root region of a mandibular incisor was created by averaging the dimensions of 10 extracted teeth, and then the basic finite element analysis (FEA) model was created. By varying canal diameter, shape, and proximal concavity, these factors could be examined for roles in fracture susceptibility and pattern. The factors all interact in influencing fracture susceptibility and pattern, with dentin thickness not the only determining factor. The removal of dentin does not always result in an increased fracture susceptibility.

Dental Pulp Cavity↗

Ultrastructural evaluation of the apical seal in roots filled with a polycaprolactone-based root canal filling material.

This in vitro study compared the ultrastructural quality of the apical seal achieved with Resilon/Epiphany and gutta-percha/AH Plus. Single-rooted extracted human teeth were prepared using a crown-down technique, debrided with NaOCl and EDTA, and obturated with either Resilon/Epiphany or gutta-percha/AH Plus. They were examined for gaps along canal walls using SEM, and for apical leakage using a transmission electron microscopy (TEM). SEM revealed both gap-free regions, and gap-containing regions in canals filled with both materials. TEM revealed the presence of silver deposits along the sealer-hybrid layer interface in Resilon/Epiphany, and between the sealer and gutta-percha in the controls. It is concluded that a complete hermetic apical seal cannot be achieved with either root filling materials.

Dental Leakage↗

Effectiveness of the Canal Finder and hand instrumentation in removal of gutta-percha root fillings during root canal retreatment.

The purpose of this study was to quantify the amount of remaining gutta-percha/sealer on the canal walls when the Canal Finder system, hand instrumentation and a combination of both (hybrid technique) were used to remove these materials. The amount of apically-extruded debris and the time required for removal were also recorded. Sixty extracted maxillary anterior teeth were prepared using a stepback technique and obturated with gutta-percha. Reinstrumentation of all groups was done in conjunction with a solvent, chloroform. The teeth were split longitudinally and photographed, and the total area of the root canal and the area of the debris were traced and quantified using a computerized image analysis system. The ratio of remaining obturation material to root canal surface was derived and analysed statistically. Hand instrumentation resulted in less debris remaining than did the other two techniques (P < 0.05). The differences in the amount of apically extruded debris were not significant among the techniques (P > 0.05). The hybrid technique required significantly less time for filling material removal. The Canal Finder system alone was not superior to hand instrumentation.

Analysis of Variance↗

Effect of a two-solution fluoride mouth rinse on deposition of loosely bound fluoride on sound root tissue and remineralization of root lesions in vitro.

A constant-composition fluoride (F) titration method was used to measure the amount of leachable F deposited on root surfaces in vitro by a 1-min rinse with a 12 mmol/l sodium fluoride (228 micrograms/g F) solution or a two-solution rinse that contained 2 mmol/l sodium fluorosilicate (228 micrograms/g total F ) and 10 mmol/l calcium chloride. The mean +/- standard deviations (n = 3) F uptake from the two rinse treatments were 0.70 +/- 0.24 micrograms/cm2 and 3.25 +/- 0.74 micrograms/cm2, respectively. In a separate experiment, the effects of sodium fluoride and the two-solution rinses on remineralization of root lesions were evaluated in an in vitro pH cycling model. The results showed that the average decrease in mineral loss (delta Z) in the two-solution rinse group (60%) was significantly greater than that obtained in the NaF rinse (41%) or the control (9%) group.

Aluminum Compounds↗

A case report of reattachment of fractured root fragment and resin-composite reinforcement in a compromised endodontically treated root.

The composite reinforcement technique has been used clinically to salvage damaged root-filled teeth compromised by caries, trauma, developmental abnormalities, internal resorption and iatrogenic causes. This clinical case report describes the use of the technique to reattach a fractured fragment in a compromised endodontically treated root besides reinforcing it for continued function in the mouth. Factors of clinical importance related to this additional application; including reattachment of tooth fragments, post crown retention, coronal microleakage and fracture resistance and strength, are also briefly discussed.

Acid Etching, Dental↗