SEARCH · Search PubMed
Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Submerging buried tooth is a rare condition whose clinical characteristics are unclear. Two cases are reported of submerging buried maxillary second deciduous molar. A review of the literature in Japanese and English provides the clinical condition of the lesion and allows for discussion of its causes.
The purpose of this study was to investigate normal eruptive pattern of upper permanent canine. One hundred and fifty-one panoramic radiographs were used. Inclination of upper canine and lateral incisor, length and horizontal and vertical positions of cusp and root apex of the canine were evaluated. The canine erupted with increasing distal inclination and with no significant changes of the lateral incisor. Developmental changes of the canines relative to palatal plane and midline were shown by figures.
Tooth size and different arch parameters were studied for influence in the presence or absence of diastemas in the primary dentition. The size of teeth scarcely influences the presence or absence of diastemas, but the dental arch dimensions are closely connected with diastemas.
The purpose of this study was to compare pulpal and periapical tissue reactions to electrosurgery versus formocresol pulpotomy techniques in the primary teeth of dogs. The study was conducted on 33 primary teeth of three mongrel dogs between the ages of one to three months. Each dog had three teeth treated by Formocresol Pulpotomy with Mechanical Coronal Pulp Removal (FC), three teeth treated by Electrosurgery Pulpotomy with Mechanical Coronal Pulp Removal (ES/MCPR), three teeth treated by Electrosurgery Pulpotomy with Electrosurgical Coronal Pulp Removal (ES/ECPR), and two teeth serving as untreated Controls. Dogs one, two and three were sacrificed performing the pulpotomies at two, four and six weeks, respectively. The pulp, periapical tissue and after surrounding bone were submitted to histological examination and the histological reaction was recorded. The results were fourteen out of 18 unfavorable and zero out of three favorable histological reactions occurred in the FC treated teeth. Six out of 18 unfavorable and one out of three favorable histological reactions occurred in the ES/MCPR treated teeth. Nine out of 18 unfavorable and two out of three favorable histological reactions occurred in the ES/ECPR treated teeth. One out of 18 unfavorable and zero out of three favorable histological reactions occurred in the untreated Control teeth. The conclusion of this study is that of the three experimental groups, the teeth treated by Electrosurgery Pulpotomy with either Mechanical or Electrosurgical Coronal Pulp Removal exhibited less histopathological reaction than the teeth treated by Formocresol Pulpotomy.
A review of the methods for the prevention of central cusp fracture is presented, with a case of central cusp protection of a premolar by self-curing acrylic resin by early detection. The anomalous tooth was extracted for histological observation. Closure of the pulpal horn, could be accomplished by early detection and adequate treatment for the central cusp fracture of premolars. In this case, if the gradual attrition of a central cusp were not possible, a protecting the cusp using a self-curing acrylic resin would be an effective form of treatment.
Trauma to deciduous anterior teeth, frequently occur in children, and the treatment is a big challenge for the pediatric dentistry. In these cases, besides the pain and discomfort provoked by the injury, both child and parents/persons responsible were eager to reconstruct the damage, as soon as possible. In modern operative restorative dentistry, no restorative material is able to substitute for the human dental enamel in quality, color and resistance. The aim of this paper is to relate the treatment of esthetic veneer (facet) of human dental enamel in a three-year-old child after trauma that caused concussion and accentuated color alteration. Clinical results showed an efficient esthetical resolution, revealing it to be a good alternative for treatment of traumatized anterior deciduous teeth.
A case of oral rehabilitation in a 4-year-old girl, in which the posterior teeth were restored using biological restorations, is described. The tooth fragments were selected from a bank of tooth tissues and bonded with dual-cure composite cement to prepared teeth. The results were satisfactory regarding retention, aesthetic and mastication, but disadvantages included long clinical appointments, laborious technique and possible fracture or degradation between the margins of the fragment and the tooth surface.
Since there is a lack of standardization of occlusal contacts for deciduous dentition, this study assessed distribution and different types of occlusal contacts at maximal intercuspal position in children from 4 to 5 1/2 years, with normal occlusion, finding a pattern able to be used as a reference for dentists during the rehabilitation of these children, and suitable for development of the craniofacial complex.
This study was conducted to determine the prevalence of pre-eruptive intracoronal dentin defects from panoramic radiographs from a group of children and young adults aged 20 years and below. The radiolucent lesions were noted with regard to which teeth were affected, the location of the defects and the size of the defects relative to the width of dentin. Out of 1007 radiographs examined, 275 (27.3%) have pre-eruptive dentin defects. The prevalence of anomaly among males was 28.4% as compared to 26.2% among females. However, the difference between genders was not significant, thus subsequent results have been combined. Of 275 subjects with dentin radiolucencies, 243 subjects (88.7%) had only one affected tooth, 30 subjects (10.9%) had two teeth affected and 2 subjects (0.7%) had three affected teeth. The tooth prevalence of the anomaly was 2.1% and most of the lesions occurred as a single occurrence on the affected tooth. Within each tooth type, the highest tooth prevalence of intracoronal dentin defect was found in the upper first premolar (5.1%). More than half of the lesions extended less than 1/3 of the width of the dentin thickness. The high prevalence of the condition indicates the need for increased awareness and recognition of this during radiographic examination of teeth in the pediatric age group in early pre-eruptive stages so that early detection and diagnosis can be made and treatment can be done at the most appropriate time.
This article presents a case with traumatic tooth fracture that was treated by direct pulp capping followed by fragment restoration. The fixed parts were reinforced by resin bonded metal plates.
The aim of this study was to evaluate the micro-tensile bond strength of adhesive systems (OptiBond Solo, Kerr; Prime & Bond NT, Dentsply) on occlusal surface of primary molars. The adhesives were tested under manufacturers' specifications and after contamination of the bonding site with saliva. Hourglass cylindrical-shaped samples were obtained and subjected to a tensile force. No significant difference was observed among the groups. OptiBond Solo and Prime & Bond NT showed similar values of bond strengths when applied on occlusal enamel of primary molar under either saliva contamination or not.
Talon cusp on a geminated tooth is a very rare condition. To the best of our knowledge, the literature contains only one case report of a labial talon cusp on a geminated tooth. This is the first clinical report describing a case of bilateral talon cusps on geminated permanent maxillary central incisors associated with dental root shape abnormality and its successful management.
BACKGROUND: In several publications, we have reported that a distinct resorptive phase of alveolar bone developed during 3 weeks following elevation of a mucoperiosteal flap in rats by a coronal surgical approach. In the present study, we compared the alveolar bone loss after mucoperiosteal flap surgery by a coronal approach (COR) to a surgical approach incising the mucosa close to the tooth apices and separating the mucoperiosteum toward the tooth crown (apical approach, AP). METHODS: Eighteen Wistar rats were divided into 2 experimental groups; each group consisted of 9 rats. In the first group, COR was performed on both buccal and lingual aspects on the right side of the rat mandible, while the left side served as a sham-operated control. In the second experimental group, AP was performed. RESULTS: In the AP group, the outer aspect (buccal or lingual) of the alveolar bone was slightly resorbed usually at the level where the mucosa was incised. In many sections, extensive modeling of new trabecular bone was seen, coronal to the surgical incision. On the contrary, the coronal surgical approach revealed an extensive resorptive phase, mainly of the periodontal aspect of the alveolar bone. CONCLUSIONS: The results of this study show that periodontal surgery by a coronal surgical approach stimulates a burst of remodeling of the alveolar bone in a very specific pattern.
BACKGROUND: The purpose of this study was to determine the total root surface area of extracted teeth by computerized image analysis and the amount of remaining attachment area assuming various amounts of bone loss due to periodontal disease. METHODS: One hundred fifty extracted mandibular teeth were evaluated, and measured from cusp tip to the cemento-enamel junction (CEJ), CEJ to root apex, and cusp tip to root apex. The fulcrum point of the tooth was also measured, along with the total root surface area of attachment and total surface area of attachment remaining following simulation of attachment loss in 2 mm increments. Measurements were made on 80 teeth on one proximal surface and either the buccal or lingual surface and multiplied by a factor of 2. Measurements on 70 teeth were made on all 4 root surfaces to predict the accuracy of measuring only 2 surfaces to determine root surface area. Images of the tooth surfaces were obtained by video camera and converted to computer image with measurement of the surface areas. RESULTS: The total root surface area for the mandibular cuspids and first and second bicuspids was 275.88 mm2, 251.45 mm2, and 271.81 mm2, respectively. The 2-sided and 4-sided measurements for the mandibular first bicuspid were 252.55 mm2 and 247.02 mm2, respectively (P>0.05). CONCLUSIONS: This study found the total root surface area to be greater than that in most previous studies. Increasing attachment loss is related to decreasing root surface area; however, this relationship is not directly proportional. No statistical difference was found between measuring 4 surfaces versus only 2 surfaces.
BACKGROUND: This study investigated the existence of interdental papillae at certain distances from the contact point to the alveolar crest, depending on the interproximal distance between roots. METHODS: A total of 206 papillae from 80 patients were examined after the inflammation of the papillae had been minimized using non-surgical periodontal therapy. The existence of the interdental papillae was determined using the following categorization: 1) papillae were deemed to be absent if they did not extend all the way up to the contact point between the teeth; and 2) papillae were determined to be present if they filled up to the entire proximal space. The interproximal distance between roots and the distance from the contact point to the alveolar crest were measured when a full-thickness flap was used. The number of papillae present interproximally between roots, according to the distance from the contact point to the alveolar crest, was analyzed using the x2 analysis method, and the linear-by-linear association analysis method was used for trend analysis. RESULTS: The number of papillae that filled the interproximal space decreased with increasing distance from the contact point to the alveolar crest (P <0.05). In addition, the number of papillae that filled the interproximal space decreased with increasing interproximal distance between roots (P <0.05) and became more prominently decreasing with the increasing distance from the contact point to the alveolar crest (especially 4, 5, and 6 mm) (P <0.05). CONCLUSION: The results suggest that the interproximal distance between roots and the distance between the contact point and the alveolar crest have an independent and combined effect on the existence of interproximal papillae.
PURPOSE: There are no reports on numerical investigation of suitable shapes of restoration. This study examines the relationship between gingival cone and marginal gingiva in natural dentition, and discusses the standard angles for giving a suitable shape at the gingival cone of restoration. METHODS: Twenty dental casts of healthy subjects with normal dentition were examined. The angles between gingival cone and marginal gingiva (CG angle), and the angles between gingival cone and the long axis of the tooth crown (CA angle) were measured. RESULTS: The mean CG angles of each site were measured between 96.7 degrees (palatal surface of the upper first molar) and 123.9 degrees (labial surface of the lower central incisor). Within the same kind of teeth, lower significant differences were observed among upper and lower, or buccal and lingual surfaces. The CG angles of anterior teeth were 9.5 to 19.2 degrees larger than those of posterior teeth. The CA angles of anterior teeth were negative, and the apex of gingival cone of anterior teeth was directed toward the incisal edge. Conversely, the CA angles of posterior teeth were positive, and the apex was directed toward the root apex. Significant negative correlation was found between CA angle and CG angle (p<0.001). CONCLUSIONS: These results suggested that the relationship between gingival cone and marginal gingiva is fairly constant throughout their angles, and that the cervical shape could affect the shape of marginal gingiva.
As for the team communication between clinical and technological sides in the denture treatment,a smooth cooperative teamwork must be established in its target treatment through individual adequate recognitions concerning the main points of sequential procedures from examination, diagnosis, therapeutic designing, impression taking and bite registration and then setting performed by a dentist on the clinical side as well as concerning the main points of technical procedures indirectly performed by a dental technician on the technological side in order to achieve the most improved preservation of remained tissues with an increased rate of functional restoration, being the final target of treatment. At present when an ultra-aged society is coming, the demand of denture treatment has been enhanced more and more. In response to the enhanced patient's demand, various modes of denture treatment have been introduced and the dental technology has advanced remarkably. In particular, a technical procedure by means of partial parallel milling representative of rigid support or of Konuskronen requires very complicated working processes. In addition, the elasticity is also required including such an occlusal construction as being harmonious with the jaw function or such tooth crown morphology as being prepared in consideration of periodontal tissues together with a lot of information from the clinical side required as well in the denture treatment. In this study, therefore, the dental technical procedures presently performed by referring to varied individual information are newly arranged and summarized so as that these complicated technical processes and working steps could be performed more easily and accurately.
PURPOSE: To determine the importance of margin design on fracture strength and pattern of endodontically-treated teeth with 0 mm of coronal tooth structure. METHODS: Using the CELAY system (MIKRONA, Switzerland), 168 human maxillary central incisors, identical in size and shape, were replicated from bovine teeth. The fracture strength and pattern of 5 types of margin design, three core materials and two levels of remaining coronal tooth structure were examined after 24 hours of water immersion (37 degrees C) under 16 conditions and 83 hours under 6 conditions without cyclic loading, as well as after 83 hours of water immersion with 300,000 cyclic loading under 6 conditions. RESULTS: In the case of cast metal post-and-cores with 0 mm of coronal tooth structure, both beveled and shouldered shoulder margin designs resulted in a higher fracture strength than chamfer and shoulder ones, achieving almost the same strength of chamfer margin design with 1 mm of coronal tooth structure. In addition, pinhole preparation on the root surface increased the fracture strength of chamfer margin design to the level of those of the above-mentioned two desirable margin designs. From a fracture pattern viewpoint, however, all margin designs were unsuitable for re-restoration of the tooth. CONCLUSIONS: Both beveled and shouldered shoulder margin designs improve fracture strength of endodontically-treated teeth with 0mm of remaining coronal tooth structure.