Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Cellulose”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35Linked to original sources

Effect of microcrystalline cellulose on liquid penetration in and disintegration of directly compressed tablets.

The penetration of isooctane and water into tablets of microcrystalline cellulose, dibasic calcium phosphate dihydrate, spray-crystallized maltose-dextrose, and blends of microcrystalline cellulose with one of the other excipients were studied. The isooctane penetrations occurred according to the Washburn equation and were not affected by the presence of 0.5 or 1.0% magnesium stearate. The inhibition of aqueous penetration into tablets resulting from hydrophobic magnesium stearate was less pronounced for vehicles like dibasic calcium phosphate, which exhibited extensive brittle fracture under compression. Microcrystalline cellulose tablets, both with and without magnesium stearate, exhibited extremely fast aqueous penetration even at low porosities, caused by breaking of the hydrogen bonds and subsequent widening of the pores. Ratios between water uptake and original pore volume up to 20 were obtained for microcrystalline cellulose tablets. This unique property was, however, suppressed by the presence of fast dissolving and highly soluble excipients like dextrose, resulting in an antagonistic disintegration behavior of tablets compressed at pressures over 10,000 N/cm2. Improved disintegration properties were obtained by blending microcrystalline cellulose with an insoluble vehicle such as dibasic calcium phosphate dihydrate.

Calcium Phosphates↗

Compaction properties of microcrystalline cellulose and sodium sulfathiazole in combination with talc or magnesium stearate.

The dynamic indentation hardness, tensile strength, bonding index, and brittle fracture index were employed to investigate the compaction properties of a plastic excipient, microcrystalline cellulose, and a brittle drug, sodium sulfathiazole, in combination with different levels of either magnesium stearate or talc. These parameters were also used to quantitate properties of various combinations of microcrystalline cellulose and sodium sulfathiazole in order to illustrate the effects of combining a plastic excipient and a brittle drug. It was shown that the tensile strength, indentation hardness, bonding index, and brittle fracture index for compacts composed of microcrystalline cellulose in combination with either talc or magnesium stearate generally decreased as the amount of talc or magnesium stearate was increased over the concentration range of 0 to 9%. Similar results were observed for admixtures of sodium sulfathiazole in combination with either talc or magnesium stearate. It was also demonstrated that the tensile strength, indentation hardness, and bonding index increased, and the brittle fracture index decreased, as the percent of microcrystalline cellulose was increased in a binary mixture of sodium sulfathiazole and microcrystalline cellulose.

Cellulose↗

Optimisation of the derivatization in cellulose-type chiral selectors for enantioseparation by centrifugal partition chromatography.

Cellulose was chemically modified with hydrophobic dodecanoyl groups followed by 3,5-dimethylphenylcarbamoyl substituents forming mixed ester/carbamate derivatives in order to improve the solubility in lipophilic solvents compared to the corresponding homosubstituted cellulose tris(3,5-dimethylphenylcarbamate). Two mixed derivatives of different degree of substitution were prepared, tested as chiral selectors (CSs) in counter-current chromatography (CCC) and compared to the homo-substituted derivative. Alternatively, cellulose tris(3,5-dichlorophenylcarbamate), was synthesised and tested with the same purpose. The racemic drugs pindolol and warfarin were used as test compounds. Biphasic organic/aqueous solvent systems, composed of methyl isobutyl ketone, t-butyl methyl ether or ethyl acetate and aqueous ammonium acetate or sodium phosphate buffer, were used. Centrifugal partition chromatography, a variety of CCC, in the classical elution mode and the pH-zone-refining displacement mode was applied. The enantioseparation of pindolol and warfarin was achieved in the latter conditions. The presence of dodecanoyl chains on the CS increased solubility in the organic solvents used. The selectivity of the mixed dodecanoyl/3,5-dimethylphenylcarbamoyl cellulose derivative with low degree of dodecanoyl groups (degree of substitution 0.3/degree of substitution 2.6, respectively) was similar to that of the homo-substituted derivative. Furthermore, the loading capacity for pindolol was increased by a factor of three compared to cellulose tris(3,5-dimethylphenylcarbamate). Nevertheless, the increasing degree of substitution with dodecanoyl groups on the CS, although improved solubility in the stationary phase, contributed negatively to the enantioselectivity, where warfarin was more affected than pindolol.

Cellulose↗

Fabrication of honeycomb-patterned cellulose films.

This paper reports for the first time on the fabrication of honeycomb-patterned cellulose films by casting water in oil emulsion of cellulose acetate onto a glass substrate and subsequent deacetylation treatment. The honeycomb pore size could be controlled from 1 to 100 microm under a saturated water vapor condition. Both cellulose and cellulose acetate films with honeycomb-pattern are expected to be a two-dimensional model of plant cell walls as well as of micro-wells for single cell cultivation. Surface topographic image of a honeycomb-patterned cellulose film (scalebar: 50 microm).

Biocompatible Materials↗

Biocomposites of plasticized starch reinforced with cellulose crystallites from cottonseed linter.

Environmentally friendly starch biocomposites were successfully developed using a colloidal suspension of cottonseed linter cellulose crystallite as a filler to reinforce glycerol plasticized starch (PS). The cellulose crystallites, having lengths of 350 +/- 70 nm and diameters of 40 +/- 8 nm on average, were prepared from cottonseed linters by acid hydrolysis. The dependence of morphology and properties of the PS-based biocomposites on cellulose crystallites content in the range from 0 to 30 wt.-% was investigated by scanning electron microscopy, differential scanning thermal analysis, dynamic mechanical thermal analysis, and measurements of mechanical properties and water absorption. The results indicate that the strong interactions between fillers and between the filler and PS matrix play a key role in reinforcing the resulting composites. The PS/cellulose crystallite composites, conditioned at 50% relative humidity, undergo an increase in both tensile strength and Young's modulus from 2.5 MPa for PS film to 7.8 MPa and from 36 MPa for PS film to 301 MPa. Further, incorporating cottonseed linter cellulose crystallites into PS matrix leads to an improvement in water resistance for the resulting biocomposites. The mechanical behaviors of the starch-based biocomposites as a function of cellulose crystallites content.

Biodegradation, Environmental↗

Probing the role of tryptophan residues in a cellulose-binding domain by chemical modification.

The cellulose-binding domain (CBDCex) of the mixed function glucanase-xylanase Cex from Cellulomonas fimi contains five tryptophans, two of which are located within the beta-barrel structure and three exposed on the surface (Xu GY et al., 1995, Biochemistry 34:6993-7009). Although all five tryptophans can be oxidized by N-bromosuccinimide (NBS), stopped-flow measurements show that three tryptophans react faster than the other two. NMR analysis during the titration of CBDCex with NBS shows that the tryptophans on the surface of the protein are fully oxidized before there is significant reaction with the two buried tryptophans. Additionally, modification of the exposed tryptophans does not affect the conformation of the backbone of CBDCex, whereas complete oxidation of all five tryptophans denatures the polypeptide. The modification of the equivalent of one and two tryptophans by NBS reduces binding of CBDCex to cellulose by 70% and 90%, respectively. This confirms the direct role of the exposed aromatic residues in the binding of CBDCex to cellulose. Although adsorption to cellulose does afford some protection against NBS, as evidenced by the increased quantity of NBS required to oxidize all of the tryptophan residues, the polypeptide can still be oxidized completely when adsorbed. This suggests that, whereas the binding appears to be irreversible overall [Ong E et al., 1989, Bio/Technology 7:604-607], each of the exposed tryptophans interacts reversibly with cellulose.

Binding Sites↗

Structural characterization of the Acetobacter xylinum endo-beta-1,4-glucanase CMCax required for cellulose biosynthesis.

Previous studies have demonstrated that endoglucanase is required for cellulose biosynthesis both in bacteria and plants. However, it has yet to be elucidated how the endoglucanases function in the mechanism of cellulose biosynthesis. Here we describe the crystal structure of the cellulose biosynthesis-related endo-beta-1,47-glucanase (CMCax; EC 3.2.1.4) from the cellulose-producing Gramnegative bacterium, Acetobacter xylinum (= Gluconacetobacter xylinus), determined at 1.65-A resolution. CMCax falls into the glycoside hydrolase family 8 (GH-8), and the structure showed that the overall fold of the CMCax is similar to those of other glycoside hydrolases belonging to GH-8. Structure comparison with Clostridium thermocellum CelA, the best characterized GH-8 endoglucanase, revealed that sugar recognition subsite +3 is completely missing in CMCax. The absence of the subsite +3 leads to significant broadness of the cleft at the cellooligosaccharide reducing-end side. CMCax is known to be a secreted enzyme and is present in the culture medium. However, electron microscopic analysis using immunostaining clearly demonstrated that a portion of CMCax is localized to the cell surface, suggesting a link with other known membrane-anchored endoglucanases that are required for cellulose biosynthesis.

Amino Acid Sequence↗

Carbon isotope analyses of cellulose using two different on-line techniques (elemental analysis and high-temperature pyrolysis)--a comparison.

Even though the recent development in on-line methods for the stable isotope determination in cellulose has led to a significant increase in sample throughput and decrease in sample preparation expenditure, there still is a large potential for optimizing the analytical procedures by simultaneously measuring the isotope ratios of two or even more elements. Therefore, the main objective of this study was to answer the question whether high-temperature pyrolysis (HTP) is a suitable and reliable technique for the determination of the carbon isotopic composition of cellulose simultaneously during the well-known conventional oxygen isotope analysis. This study shows that HTP of cellulose is a technique that can produce reasonable delta(13)C values, matching the requirements of most research problems related to paleoclimatology. The reproducibility of the delta values for (13)C/(12)C is better than 0.2 per thousand. Some deficiencies of the method are related to the incomplete conversion of the organic carbon in the sample to carbon monoxide. A clear isotope effect seems to be related to the non-statistical conversion of the carbon in the cellulose to CO. The extent of this effect appears to be controlled by the relative proportion of crystallized and amorphous matter in the cellulose structure. Those deficiencies can be eliminated by using an appropriate normalization and by applying the principles of identical treatment for reference materials and samples. In general, a very good agreement is achieved for carbon isotope values determined by HTP and elemental analysis (EA).

Carbon↗

Studies on the capacity of the cellulase of the anaerobic rumen fungus Piromonas communis P to degrade hydrogen bond-ordered cellulose.

The anaerobic rumen fungus Piromonas communis, when cultured on cotton fibre as the carbon source, produces an extracellular cellulase that is capable of solubilizing "crystalline" hydrogen-bond-ordered cellulose, in the form of the cotton fibre, at a rate that is greater than that of any other cellulases reported in the literature hitherto. The cell-free culture fluid is also very rich in xylan-degrading enzymes. The activity towards crystalline cellulose resides in a high-molecular-mass (approximately 700-1000 kDa) component (so-called crystalline-cellulose-solubilizing component, CCSC) that comprises endo (1-->4)-beta-D-glucanase (carboxymethylcellulase), beta-D-glucosidase and another enzyme that appears to be important for the breakdown of hydrogen-bond-ordered cellulose. The CCSC is associated with only a small amount of the endo(1-->4)-beta-D-glucanase (1.9%), beta-D-glucosidase (0.7%) and protein (0.5%) found in the crude cell-free cellulase preparation. The CCSC, unlike the bulk of the endo(1-->4)-beta-D-glucanase and beta-D-glucosidase, is very strongly absorbed on the microcrystalline cellulose, Avicel.

Anaerobiosis↗

Cellulose in the house of the appendicularian Oikopleura rufescens.

By electron diffraction analysis, highly crystalline cellulose I beta was found in the house (a special structure in which the tunicate lives) of the appendicularian Oikopleura rufescens. Cellulose microfibrils 20 nm in width were observed in a random array or highly organized with rectangular spacing of 2 to 10 microns in the house. The bundled cellulose microfibrils formed in the inlet filters, which are highly ordered meshwork structures. This paper provides the first account of the existence of cellulose in the house of an appendicularian. Our findings showed that the house and tunic are homologous tissues among the tunicates, and that the common ancestor of the tunicates (ascidians, thaliaceans, and appendicularians) already possessed cellulose-biosynthetic ability.

Animals↗

Analysis of biomass cellulose in simultaneous saccharification and fermentation processes.

A direct method for determining the cellulose content of biomass residues resulting from simultaneous saccharifiaction and fermentation (SSF) experiment has been developed and evaluated. The method improves on classical cellulose assays by incorporating the enzymatic removal of yeast glucans from the biomass residue prior to acid hydrolysis and subsequent quantification of cellulose-derived glucose. An appropriate cellulase-free, commercially available, yeast-lysing enzyme preparation from Cytophaga was identified. A freeze-drying step was identified as necessary to render the SSF yeast cells susceptible to enzymatic lysis. The method was applied to the analysis of cellulose and yeast-associated glucans in SSF residues from three pretreated feedstocks; hybrid poplar, switchgrass, and cornstover. Cellulose assays employing the lysing-enzyme preparation demonstrated relative errors up to 7.2% when yeast-associated glucans were not removed prior to analysis of SSF residues. Enzymatic lysis of SSF yeast cells may be viewed as a general preparatory procedure to be used prior to subsequent chemical and physical analysis of SSF residues.

Biomass↗

Production of succinate from glucose, cellobiose, and various cellulosic materials by the ruminal anaerobic bacteria Fibrobacter succinogenes and Ruminococcus flavefaciens.

The production of organic acids by two anaerobic ruminal bacteria Fibrobacter succinogenes S85 and Ruminococcus flavefaciens FD-1, was compared with glucose, cellobiose, microcrystalline cellulose, Walseth cellulose (acid swollen cellulose), pulped paper, and steam-exploded yellow poplar as substrates. The major end product produced by F. succinogenes from each of these substrates was succinate (69.5-83%), the principal secondary product was acetate (16-30.5%). Maximum succinate productivity ranged from 14.1 mg/L.h for steam-exploded yellow Poplar to 59.7 mg/L.h for pulped paper. For R. flavefaciens, the major end product from cellobiose, microcrystalline cellulose, and acid-swollen Walseth cellulose was acetate (39-46%), pulped paper and steam-exploded yellow poplar yielded succinate (42-54%) as the major product. Maximum succinate productivity by R. flavefaciens ranged from 9.21 mg/L.h for cellobiose to 43.1 mg/L.h for pulped paper. In general, much less succinate was produced at a lower maximum productivity by R. flavefaciens than by F. succinogenes under similar fermentation conditions. The maximum succinate productivities by these two organisms are comparable to the previously reported value of 59 mg/L.h for Anderobiospirillum succiniciproducens grown on glucose and corn steep liquor.

Acetic Acid↗

Anaerobic bioconversion of cellulose by Ruminococcus albus, Methanobrevibacter smithii, and Methanosarcina barkeri.

A system is described that combines the fermentation of cellulose to acetate, CH4, and CO2 by Ruminococcus albus and Methanobrevibacter smithii with the fermentation of acetate to CH4 and CO2 by Methanosarcina barkeri to convert cellulose to CH4 and CO2. A cellulose-containing medium was pumped into a co-culture of the cellulolytic R. albus and the H2-using methanogen, Mb. smithii. The effluent was fed into a holding reservoir, adjusted to pH 4.5, and then pumped into a culture of Ms. barkeri maintained at constant volume by pumping out culture contents. Fermentation of 1% cellulose to CH4 and CO2 was accomplished during 132 days of operation with retention times (RTs) of the Ms. barkeri culture of 7.5-3.8 days. Rates of acetate utilization were 9.5-17.3 mmol l(-1) day(-1) and increased with decreasing RT. The Ks for acetate utilization was 6-8 mM. The two-stage system can be used as a model system for studying biological and physical parameters that influence the bioconversion process. Our results suggest that manipulating the different phases of cellulose fermentation separately can effectively balance the pH and ionic requirements of the acid-producing phase with the acid-using phase of the overall fermentation.

Acetic Acid↗

Cloning, expression in Streptomyces lividans and biochemical characterization of a thermostable endo-beta-1,4-xylanase of Thermomonospora alba ULJB1 with cellulose-binding ability.

Several thermophilic actinomycetes were isolated from urban solid waste. One of them, Thermomonospora alba ULJB1, showed a broad degradative activity on xylan, cellulose, starch and other polymers. Xylanase and cellulase activities were quantified and compared with those Thermomonospora fusca. Genes encoding two different endo-beta-1,4-xylanase were cloned from T. alba ULJB1. One of them, xylA, was sequenced, subcloned and overexpressed in Streptomyces lividans. It encodes a protein of 482 amino acids with a deduced molecular mass of 48,456 Da. The protein contains a 38-amino-acid leader peptide with six Arg+ residues in its amino-terminal end, a catalytic domain and a cellulose-binding domain connected by a linker region rich in proline and glycine. The XylA protein was purified to near homogeneity from S. lividans/XylA cultures. Two forms of the extracellular xylanase, of 48 kDa and 38 kDa, were produced that differed in their cellulose-binding ability. The 48-kDa protein showed a strong binding to cellulose whereas the 38-kDa form did not bind to this polymer, apparently because of the removal during processing of the cellulose-binding domain. Both forms were able to degrade xylans form different origins but not lichenam or carboxymethylcellulose. The major degradation product was xylobiose with traces of xylose. The xylanase activity was thermostable, showing a good activity up to 95 degrees C, and had broad pH stability in the range from pH 4.0 to pH 10.0.

Actinomycetales↗

Identification of tandemly repeated type VI cellulose-binding domains in an endoglucanase from the aerobic soil bacterium Cellvibrio mixtus.

Cellulose-binding domains (CBD) play a pivotal role during plant cell wall hydrolysis by cellulases and xylanases from aerobic soil bacteria. Recently we have reported the molecular characterisation of a single-domain endoglucanase from Cellvibrio mixtus, suggesting that some cellulases produced by this aerobic bacterium preferentially hydrolyse soluble cellulosic substrates. Here we describe the complete nucleotide sequence of a second cellulase gene, celB, from the soil bacterium C. mixtus. It revealed an open reading frame of 1863 bp that encoded a polypeptide, defined as cellulase B (CelB) with a predicted Mr of 66 039. CelB contained a glycosyl hydrolase family 5 catalytic domain at its N terminus followed by two repeated domains, which exhibited sequence identity with type VI CBD previously found in xylanases. Full-length CelB bound to cellulose while catalytically active truncated cellulase derivatives were unable to bind the polysaccharide, confirming that CelB is a modular enzyme and that the type VI CBD homologues were functional. Analysis of the biochemical properties of CelB revealed that the enzyme hydrolyses a range of cellulosic substrates, although it was unable to depolymerise Avicel. We propose that type VI CBD, usually found in xylanases, provide an additional mechanism by which cellulases can accumulate on the surface of the plant cell wall, although they do not potentiate cellulase activity directly. The results demonstrate that C. mixtus, in common with other aerobic bacteria, is able to produce cellulases that are directed to the hydrolysis of cellulose in its natural environment, the plant cell wall.

Amino Acid Sequence↗

Raman imaging to investigate ultrastructure and composition of plant cell walls: distribution of lignin and cellulose in black spruce wood (Picea mariana).

A detailed understanding of the structural organization of the cell wall of vascular plants is important from both the perspectives of plant biology and chemistry and of commercial utilization. A state-of-the-art 633-nm laser-based confocal Raman microscope was used to determine the distribution of cell wall components in the cross section of black spruce wood in situ. Chemical information from morphologically distinct cell wall regions was obtained and Raman images of lignin and cellulose spatial distribution were generated. While cell corner (CC) lignin concentration was the highest on average, lignin concentration in compound middle lamella (CmL) was not significantly different from that in secondary wall (S2 and S2-S3). Images generated using the 1,650 cm(-1) band showed that coniferaldehyde and coniferyl alcohol distribution followed that of lignin and no particular cell wall layer/region was therefore enriched in the ethylenic residue. In contrast, cellulose distribution showed the opposite pattern-low concentration in CC and CmL and high in S2 regions. Nevertheless, cellulose concentration varied significantly in some areas, and concentrations of both lignin and cellulose were high in other areas. Though intensity maps of lignin and cellulose distributions are currently interpreted solely in terms of concentration differences, the effect of orientation needs to be carefully considered to reveal the organization of the wood cell wall.

Acrolein↗

Roles of microtubules and cellulose microfibril assembly in the localization of secondary-cell-wall deposition in developing tracheary elements.

The roles of cellulose microfibrils and cortical microtubules in establishing and maintaining the pattern of secondary-cell-wall deposition in tracheary elements were investigated with direct dyes to inhibit cellulose microfibril assembly and amiprophosmethyl to inhibit microtubule polymerization. When direct dyes were added to xylogenic cultures of Zinnia elegans L. mesophyll cells just before the onset of differentiation, the secondary cell wall was initially secreted as bands composed of discrete masses of stained material, consistent with immobilized sites of cellulose synthesis. The masses coalesced, forming truncated, sinuous or smeared thickenings, as secondary cell wall deposition continued. The absence of ordered cellulose microfibrils was confirmed by polarization microscopy and a lack of fluorescence dichroism as determined by laser scanning microscopy. Indirect immunofluorescence showed that cortical microtubules initially subtended the masses of dye-altered secondary cell wall material but soon became disorganized and disappeared. Although most of the secondary cell wall was deposited in the absence of subtending cortical microtubules in dye-treated cells, secretion remained confined to discrete regions of the plasma membrane. Examination of non-dye-treated cultures following application of microtubule inhibitors during various stages of secondary-cell-wall deposition revealed that the pattern became fixed at an early stage such that deposition remained localized in the absence of cortical microtubules. These observations indicate that cortical microtubules are required to establish, but not to maintain, patterned secondary-cell-wall deposition. Furthermore, cellulose microfibrils play a role in maintaining microtubule arrays and the integrity of the secondary-cell-wall bands during deposition.

Asteraceae↗

Development of an enzymatic assay for the determination of cellulose bioavailability in municipal solid waste.

As there is a constant need to assess the biodegradation potential of refuse disposed of in landfills, we have developed a method to evaluate the biodegradability of cellulosic compounds (cellulose and hemicellulose) in municipal solid waste. This test is based on the quantification of monosaccharides released after the hydrolysis of solid waste samples with an optimised enzyme preparation containing commercially available cellulases and hemicellulases. We show that the amounts of monosaccharides could be related to the biodegradability of the cellulosic material contained in the samples. This enzymatic cellulose degradation test was assayed on 37 samples originating from three Belgian landfills and collected at different depths. As results correlated well with those obtained with a classical biochemical methane potential assay, this new and rapid test is sufficiently reliable to evaluate cellulose bioavailability in waste samples.

Biodegradation, Environmental↗