Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “interfacial characterization”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34Linked to original sources
PubMed1997

Fiber-matrix interface studies on bioabsorbable composite materials for internal fixation of bone fractures. II. A new method using laser scanning confocal microscopy.

In this study, a new visual characterization method was developed using laser scanning confocal microscopy (LSCM) to study morphologic properties, particularly at the fiber-matrix interface, by optical sectioning of bioabsorbable single-fiber composites. The interface gap width (IGW) between the fiber and matrix, and the changes in IGW after in vitro hydrolysis, named the gap rate (Rg), were measured from images obtained using the LSCM. Higher values for IGW and Rg showed faster degradation of the fiber-matrix interface. These parameters were used to investigate the effects of strain, wicking, different reinforcing fibers, and gamma-irradiation on the fiber-matrix interface morphology. The component materials used were nonbioabsorbable AS4 carbon (C) fibers, bioabsorbable calcium phosphate (CaP), poly(glycolic acid) (PGA), and chitin fibers, and bioabsorbable poly(L-lactic acid) (PLLA) matrix. The application of strain on CaP/PLLA composites increased the IGW up to about 15%, after which there was no change up to 25%. The Rg for CaP/PLLA composites with the fiber ends exposed in vitro (permitting wicking) was greater than for CaP/PLLA with the fiber ends embedded completely within the matrix (preventing wicking). Open-end C/PLLA composites had the slowest rate of interface degradation in vitro, followed by chitin/PLLA, PGA/PLLA, and CaP/PLLA. The exposure of closed-end CaP/PLLA composites to 4 Mrad of gamma-irradiation, in air at room temperature or in vaccuum at 77K, accelerated the rate of interface degradation in vitro. In conclusion, an effective new visual characterization method was developed using LSCM, and it was used to show that (a) moderate strain could accelerate the degradation of the interface, (b) fiber-matrix interface wicking could accelerate the rate of degradation of the interface, (c) the rate of interface degradation depends on the type of fiber used, and (d) gamma-irradiation could accelerate the rate of interface degradation. Furthermore, the results of LSCM analysis of different reinforcing fibers with a PLLA matrix agree with measurements of interfacial shear strength (IFSS) and single-fiber tensile strength reported in Part I of this study.

Chitin↗
PubMed2003

A novel biosensing interfacial design produced by assembling nano-Au particles on amine-terminated plasma-polymerized films.

A novel biosensing interfacial design strategy has, for the first time, been produced by assembling nano-Au particles on amine-terminated plasma-polymerized films (PPF). A quartz-crystal microbalance (QCM) as a model transducer was deposited with PPF of n-butylamine by use of a glow discharge and then treated with nano-Au particles. The kinetic assembly process and conditions were studied using the real-time-output device and the surface topology of the resulting crystal was characterized by atomic force microscopy (AFM) imaging. Based on analysis of the experimental data, including the association constant of Au-amine interaction, the assembly mechanism is considered to be partly or even mainly chemical adsorption. Moreover, immobilization of anti-human IgM antibody (IgM Ab), as an example, on the developed PPF-Au interface was investigated. It was found that antibody molecules immobilized by the proposed procedure had higher immunological activity than those immobilized by the conventional glutaraldehyde (GLU) cross-linking procedure or the direct gold-attachment procedure. The newly developed sensor had a better response, with a detection limit of IgM concentration as low as approximately 1.00 microg mL(-1). In particular, the extremely high stability of both PPF and nano-Au monolayer formulated allows the designed biosensing interface to withstand harsh regeneration treatment, making it reusable.

Biosensing Techniques↗
PubMed2026

Quantitative Proteomic Profiling of Pinctada fucata Shell Nacre Defines a Solubility-Based Type Classification of Shell Matrix Proteins.

Shell matrix proteins (SMPs) are key organic components of molluscan biominerals, yet previous nacre proteomics have remained largely qualitative, limiting evaluation of the abundance and fraction association of individual SMPs. Here, we established a quantitative proteomic approach for the nacreous layer of the pearl oyster Pinctada fucata by integrating optimized shell preservation, stepwise fractionation, and data-independent acquisition (DIA) proteomics. SMPs were separated into an ethylenediaminetetraacetic acid (EDTA)-soluble matrix (ESM), an EDTA-insoluble but sodium dodecyl sulfate/dithiothreitol (SDS/DTT)-soluble matrix (SSM), and an SDS/DTT-insoluble matrix (ISM). DIA outperformed data-dependent acquisition in proteome coverage and enabled quantification of 327 SMPs across a broad dynamic range. Fraction-resolved abundance profiling showed that each fraction was characterized by distinct SMP compositions. To summarize these distributions, we introduced a solubility-based type classification that grouped SMPs into four types according to their quantitative partitioning among fractions. Well-known SMPs, including nacrein, Pif 80, and MSI60, were assigned to intuitively consistent types, whereas proteases, protease inhibitors, and tyrosinases also showed biased type distributions. These results support a three-compartment model of the nacreous layer consisting of (i) an insoluble interlamellar membrane core, (ii) a relatively extractable interfacial layer, and (iii) a soluble matrix fraction enriched in proteins potentially involved in ionic regulation and protein maturation. This study provides a quantitative framework for understanding coordinated SMP functions during nacre formation and for comparative analyses of molluscan shell proteomes.

Animals↗
PubMed2003

Characterization of a quaternary liquid system improving the bioavailability of poorly water soluble drugs.

The aim of this work is the characterization of the quaternary system composed of water, triacetin (oil), ethanol (alcohol), and Tween 80 (surfactant), as its results enable the enhancement of the bioavailability of nimesulide, a poorly water soluble nonsteroidal antiinflammatory drug widely employed in the pharmaceutical field. Particular attention is devoted to the surfactant-free ternary system, as it proved able to solubilize nimesulide as well, and the absence of a surfactant is desirable in order to keep the preparation as tolerable as possible. Both bulk and interfacial properties of this system are investigated, and a mathematical model to calculate the interface composition of a three-component two-phase system is developed. This model is based on Gibbs' theory on interfaces, which considers an arbitrary mathematical dividing surface so that the two phases continue uniformly up to it, although interface regions have no sharply defined boundaries. We find that both the quaternary and the ternary systems investigated show a miscibility lacuna and that, in the surfactant-free ternary system, an increase of the ethanol weight fraction is reflected as an impoverishment of the ethanol interfacial molar fraction.

Journal Article↗
PubMed1981

Cholesterol solubilization by short-chain lecithins: characterization of mixed micelles and cholesterol oxidase activity.

The synthetic short-chain lecithins diheptanoylphosphatidylcholine and dioctanoylphosphatidylcholine solubilize cholesterol up to 10 and 18 mol %, respectively. The half-time for diheptanoylphosphatidylcholine solubilization of solid cholesterol is 80 (+/- 30) min. This is much faster than Triton X-100 micelle or egg lecithin vesicle solubilization of solid cholesterol. Both the broadening of lecithin and [4-13C]cholesterol carbon resonances by Mn2+ and the observation of surface dilution kinetics for phospholipase A2 (Naja naja naja) and phospholipase C (Bacillus cereus) hydrolysis of the lecithins indicate that the cholesterol 3 beta-hydroxyl group resides at the particle surface exposed to solvent. Analysis of lecithin 13C chemical shifts suggests that cholesterol causes the short-chain lecithin acyl chains to become slightly more trans, although to a lesser extent than it affects egg lecithin chains in liposomes. Lecithin motion as characterized by 13C T1s and line widths is unaffected by the incorporation of cholesterol. [3,4-13C2]Cholesterol line widths are 5-10-fold narrower in these mixed micelles than in egg lecithin sonicated vesicles, while T1s in the two systems are comparable. These mixed micelles serve as substrates for cholesterol oxidase (Nocardia erythropolis) with a 40-fold rate increase over comparable cholesterol concentrations in egg lecithin vesicles. Part of this rate enhancement can be understood as an increase in interfacial area available to cholesterol oxidase in the micellar systems. These studies suggest that cholesterol oxidase has a weaker affinity for interfaces than other surface active enzymes.

3-Hydroxysteroid Dehydrogenases↗
PubMed2002

The Sak polo-box comprises a structural domain sufficient for mitotic subcellular localization.

The small family of polo-like kinases (Plks) includes Cdc5 from Saccharomyces cerevisiae, Plo1 from Schizosaccharomyces pombe, Polo from Drosophila melanogaster and the four mammalian genes Plk1, Prk/Fnk, Snk and Sak. These kinases control cell cycle progression through the regulation of centrosome maturation and separation, mitotic entry, metaphase to anaphase transition, mitotic exit and cytokinesis. Plks are characterized by an N-terminal Ser/Thr protein kinase domain and the presence of one or two C-terminal regions of similarity, termed the polo box motifs. These motifs have been demonstrated for Cdc5 and Plk1 to be required for mitotic progression and for subcellular localization to mitotic structures. Here we report the 2.0 A crystal structure of a novel domain composed of the polo box motif of murine Sak. The structure consists of a dimeric fold with a deep interfacial cleft and pocket, suggestive of a ligand-binding site. We show that this domain forms homodimers both in vitro and in vivo, and localizes to centrosomes and the cleavage furrow during cytokinesis. The requirement of the polo domain for Plk family function and the unique physical properties of the domain identify it as an attractive target for inhibitor design.

Amino Acid Motifs↗
PubMed2001

Addition of hydrophilic and lipophilic compounds of biological relevance to the monoolein/water system. I. Phase behavior.

The solubilization of hydrophilic and lipophilic molecules, with biological relevance, in the monoolein/water (MO/W) system has been investigated for phase behavior. Small angle X-ray scattering (SAXS), nuclear magnetic resonance (NMR) and optical microscopy (OM) have been used to characterize the microstructure of the liquid crystalline phases. Partial phase diagrams of the MO/W system in the presence of sodium decanoate, 1-adamantanamine hydrochloride, decanoic and dodecanoic acids, acetyl salicilic acid and retinol have been determined. The stability of the various phases has been followed for at least eight months. The polarity and the molecular structure of the additive determine whether it is located at the polar interface or in the apolar region of the lipid layer. Therefore, the additive affects the interfacial curvature of the lipid layer differently, which in turn will trigger transition to disparate phases. A cubic-to-reverse hexagonal phase transition has been observed with time for most of the ternary systems, with the exception of 1-adamantanamine hydrochloride and retinol. The release of free glycerol and oleic acid due to MO hydrolysis has been clearly demonstrated by 13C NMR. This would account for the changes in phase behavior observed with time. The released oleic acid, located in the MO acyl chain region, favors the inverse interfacial curvature. The average lipid dimensions in the cubic and in the reverse hexagonal phases have been calculated from SAXS data.

Carbon Isotopes↗
PubMed1991

A novel, self-correcting membrane coating technique.

A novel coating process, leading to formation of uniform, defect-free coating on solid dosage forms, is proposed. The coating process, termed "diffusion-controlled interfacial complexation," involves a chemical reaction between a reactant incorporated in the solid unit to be coated and a polymer solution, forming the coating medium. The reaction results in the formation of an insoluble reactant-polymer film around the solid. The rate of film/membrane formation is controlled by the rate of diffusion of reactant through the reactant-polymer film. In the model system, calcium acetate was selected as the reactant and algin as the polymer. The coating process was mathematically characterized in terms of rate of increase in film thickness, film weight, and depletion of reactant. Compressed tablets coated using the above process provided zero-order release in distilled water.

Dosage Forms↗
PubMed2000

Effects of hydrodynamic and interfacial forces on plant cell suspension systems.

Plant cells are perceived to be sensitive to the hydrodynamic environment in conventional bioreactors. Heightened sensitivity, relative to most bacterial cultures, is frequently attributed to larger plant cell sizes, extensive vacuolization and aggregation patterns. Early studies of shear sensitivity focused on cell lysis and/or loss of viability. More recently, an extensive array of sub-lethal responses has been identified. A fuller understanding of these sub-lytic effects may assist in the optimization of large-scale cultivation conditions. This paper reviews recent work on the hydrodynamic shear sensitivity of plant cell systems, under cultivation conditions and in purpose-built shearing devices. The relevance of different approaches to the characterization of the intensity of a given hydrodynamic environment is discussed. Indicators of cell response to hydrodynamic stress are evaluated. The potential significance of cellular defense mechanisms, observed in response to mechanical stimulants, is identified.

Bioreactors↗
PubMed1989

Partial characterization of the adsorbed protein layer on Dirofilaria immitis (Nematoda) cuticle.

Electron microscopy coupled with ferritin-conjugated indirect immunolabeling was used to locate sites of adsorbed host protein on cuticular surfaces of the adult canine heartworm, Dirofilaria immitis. The epicuticle appeared as a trilaminated structure. At high magnifications, the outermost layer of this structure was resolved into a trilaminar layer, which might correspond to the plasma membrane of animal cells. A ruthenium red-positive layer was external to the epicuticle. Ferritin-antibody conjugates showed evidence of adsorbed dog albumin, dog immunoglobulin class G (IgG), and dog complement fraction 3 (C3) on the surface. Ferritin adsorption to control surfaces was minimal. Possible causes and effects of interfacial host-protein adsorption are discussed in an attempt to bring insight to the hemocompatible nature of the parasitic cuticle.

Animals↗
PubMed1993

Characterization of oil-in-water emulsions prepared from solid-state emulsions: effect of matrix and oil phase.

Emulsions (o/w) were prepared from solid-state emulsions comprised of various matrix materials and oils and the resultant particle size properties determined. Results suggest that for those matrices that can form solid-state emulsions, the droplet size decreased as a function of time, as previously observed. The final droplet size was dependent on the oil utilized but was independent of the matrix material. The use of mineral oil resulted in the smallest droplet diameter (approximately 1.5 microns) while isopropyl myristate resulted in the largest droplet diameter (approximately 3 microns). With the exception of mineral oil, the oil/water interfacial tension was found to be directly proportional to the droplet diameter. The rate of emulsification appeared to be biphasic. The initial emulsification phase appeared to be independent of the matrix material while the terminal phase was a function of the matrix material. Most importantly, it was found that solid state emulsions could be prepared from a diverse, yet specific, list of matrices.

Chemical Phenomena↗
PubMed2006

Effects of copolymer concentration and chain length on the pH-responsive behavior of diblock copolymer micellar films.

The pH-responsive behavior of adsorbed diblock copolymer films of PDMA-PDEA (poly(2-(dimethylamino)ethyl methacrylate)-block-poly(2-(diethylamino)ethyl methacrylate)) on silica has been characterized using a quartz crystal microbalance with dissipation monitoring (QCM-D), an optical reflectometer (OR) and an atomic force microscope (AFM). The copolymer was adsorbed at pH 9 from various copolymer concentrations; QCM-D measurements indicate that the level of desorption when rinsed at pH 9 depends on the initial copolymer concentration. The adsorbed films produced at pH 9 generally have low charge densities; adjusting the solution pH to 4 results in a significant protonation of the constituent copolymers and a related interfacial structural change for the copolymer film. OR studies show no significant change during pH cycling, while QCM-D measurements indicate that the adsorbed mass and dissipation alter dramatically in response to the solution pH. The difference between the QCM-D adsorbed masses and dissipation values at pH 4 and 9 were found to be dependent on the initial copolymer concentration. This is due to differences in the initial conformations within the adsorbed copolymer layers at pH 9. The effect of the PDMA chain length on the pH-responsive behavior has also been studied; both the QCM-D adsorbed mass and dissipation of PDMA54-PDEA24 (shorter PDMA block) at pH 4 and 9 were observed to be greater than those of PDMA9X-PDEA2Y (longer PDMA block). This suggests that the normal extension of the adsorbed PDMA54-PDEA24 copolymer films is more significant than that of the PDMA9X-PDEA2Y films on silica.

Hydrogen-Ion Concentration↗
PubMed2004

Small is different: shape-, size-, and composition-dependent properties of some colloidal semiconductor nanocrystals.

As the size of material becomes equal to or falls below the nanometer length scale that characterizes the motion of its electrons and thus its properties, the latter become sensitive not only to the size but also to the shape and composition of the particles. In this Account, we describe the changes of some interesting properties in different colloidal semiconductor nanoparticles, such as the electronic relaxation rates as spherical nanoparticles change to nanorods, and the changes in the structure or size of very small nanoparticles upon adsorbing strongly bound molecules. We have also determined and explained the difference in the interfacial crossing rates of electrons and holes in a composite nanostructure.

Journal Article↗
PubMed2002

Visualization and characterization of electroactive defects in the native oxide film on aluminium.

Spatial!y localized electrochemical activity at Al/Al2O3 electrodes has been investigated using scanning electrochemical microscopy (SECM) in order to establish the relationship between localized corrosion of Al (and Al alloys) with the defect structure of the native Al2O3 film. Local electron transfer at microscopic defects (2 to 50 microm radius) was visualized in acetonitrile solutions using the nitrobenzene/nitrobenzene radical anion (Eo approximately -1.6 V vs. Ag/Ag+) and tetracyanoquinodimethane/tetracyanoquinodimethane radical anion couples (Eo approximately -0.3 V) as redox mediators for imaging. SECM investigations revealed no significant differences in electrochemical activity at Al/AI203 electrodes in the two mediator solutions, indicating that electrical conduction at the defect sites is weakly dependent on interfacial potential and the electric field across the Al2O3 film. The density of electroactive defects observed by SECM varied by 2 to 3 orders of magnitude between electrodes prepared from the same source of Al (either 99.450% and 99.9995%) suggesting that electrical conduction in the native oxide is very sensitive to surface preparation. Defect densities as low as approximately 3 sites cm(-2) were readily measured by SECM.

Journal Article↗
PubMed2006

Effect of counterions on the activity of lipase in cationic water-in-oil microemulsions.

This paper delineates how the different counterions affect the physicochemical properties of the aqueous aggregates and thereby the lipase activities at the interface of cationic water-in-oil microemulsions. To this end, we have synthesized a series of cetyltrimethylammonium-based surfactants, 1-14, having aliphatic, aliphatic with aromatic substitution at the alpha position, and aromatic carboxylate anion as the counterion. The physicochemical characterizations of these aqueous aggregates were done by conductometric, tensiometric, fluorometric techniques to determine counterion binding (beta), critical micelle concentration (cmc), and micropolarity at the microenvironment. It has been found that the activity of lipase mainly increases with hydrophobicity (which is directly proportional to the counterion binding (beta) of the surfactant) of the counterion and reaches a maximum when the beta value is around 0.5. Increase in hydrophobicity as well as beta leads to the attachment of more counterions at interface resulting in enhancement of interfacial area. Consequently, the enzyme may attain flexible secondary conformation at the augmented surface area and also allow larger population of substrates and enzyme molecules at the interface leading to the enhancement in lipase activity. After an optimum value of beta, further increase probably produces a steric crowding at the interface, hindering the smooth occupancy of enzyme and the substrate in this region leading to decrease of enzyme activity, while molecular surface area of the counterion did not show any virtual influence on the lipase activity. Thus, the variation in the counterion structure and hydrophobicity plays a crucial role in modulating the lipase activity.

Caproates↗
PubMed1991

Characterization of physicochemical forces involved in adhesion of Listeria monocytogenes to surfaces.

This study investigated the physicochemical forces involving the adhesion of Listeria monocytogenes to surfaces. A total of 22 strains of L. monocytogenes were compared for relative surface hydrophobicity with the salt aggregation test. Cell surface charges and hydrophobicity of L. monocytogenes Scott A were also determined by electrophoretic mobility, hydrophobic-interaction chromatography, and contact angle measurements. Electrokinetic measurements indicated that the strain Scott A has a negative electrophoretic mobility. Physicochemical characterization of L. monocytogenes by various methods indicates that this microorganism is hydrophilic. All L. monocytogenes strains tested with the salt aggregation test method aggregated a at very high ammonium sulfate molarities. The hydrophobicity-interaction chromatography results show that L. monocytogenes Scott A cells do not adhere to octyl-Sepharose unless the pH is low. Results from contact angle measurements showed that the surface free energy of strain Scott A was 65.9 mJ.m-2, classifying this microorganism as a hydrophilic bacterium. In addition, the interfacial free energy of adhesion of L. monocytogenes Scott A estimated for polypropylene and rubber was lower than that for glass and stainless steel. However, these theoretical implications could not be correlated with the attachment capabilities of L. monocytogenes.

Bacterial Adhesion↗
PubMed1988

Purification, characterization and kinetic properties of the rabbit gastric lipase.

Rabbit gastric lipase was purified from an acetonic powder of rabbit stomach fundus. 25 mg of pure rabbit gastric lipase (glycerol ester hydrolase, EC 3.1.1.3) was obtained from 30 rabbit stomachs after ammonium sulfate fractionation, Sephadex G-100 gel filtration and cation exchange (mono S column) using a fast protein liquid chromatography (FPLC) system. The pure enzyme obtained was resistant to acidic pH conditions, and had specific activities of 1200, 850 and 280 U/mg, using, respectively, short- (tributyroylglycerol (TC4)), medium- (trioctanoyl- to tridecanoylglycerol (TC8-TC10)) and long-chain (soybean oil) triacylglycerols. The amino-acid composition was determined, and the first 30 N-terminal amino-acid residues were sequenced. Interfacial denaturation and catalytic properties on triacylglycerol emulsions were studied. Rabbit gastric lipase turned out to be structurally and kinetically very similar to human gastric lipase.

Amino Acid Sequence↗
PubMed2002

Investigation of interfacial capacitance of Pt, Ti and TiN coated electrodes by electrochemical impedance spectroscopy.

Electrochemical processes at the electrode-electrolyte (body fluid) interface are of ultimate importance for stimulating/sensing electrode function. A high electrode surface area is desirable for safe stimulation through double-layer charging and discharging. Pt and Pt-Ir alloys have been the most common electrode materials. The use of TiN coating as the surface layer on the electrode has found increasing interest because of its metal-like conductivity, excellent mechanical and chemical properties, and the fact that it can be deposited with a high surface area. In this work, electrochemical impedance spectroscopy (EIS), which is a sensitive and non-destructive technique and widely used for characterization of electrical properties of electrode-electrolyte interfaces, was applied to investigate pure Pt and Ti, and TiN coated electrodes exposed to a phosphate-buffered-saline (PBS) solution. Platinized Pt and Ti were also studied for comparison. The capacitance value of the electrodes in PBS was obtained through quantitative analysis of the EIS spectra. The results reveal that the capacitance of the TiN coated electrodes with a rough surface is several hundreds times higher than that of a smooth Pt surface. Platinization of Ti can also increase the capacitance to the same extent as platina. EIS has been shown to be a powerful technique for characterization of stimulating/sensing electrodes.

Coated Materials, Biocompatible↗