Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Tooth Permeability”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34Linked to original sources

Ultrastructure of smear layer-covered intraradicular dentin after irrigation with BioPure MTAD.

The structure of mechanically instrumented intraradicular dentin after irrigation with NaOCl as the initial rinse and BioPure MTAD as the final rinse were examined from the coronal, middle, and apical parts of root canal walls using transmission electron microscopy. Sterile distilled water and EDTA as final rinses were employed as the respective positive and negative controls under the same experimental conditions. There were 2 to 5 mum thick smear layers produced on mechanically instrumented root canal walls that were completely removed by EDTA and BioPure MTAD under agitation. Both irrigants created a zone of demineralized collagen matrices in eroded dentin and around the dentinal tubules, with the mildly acidic BioPure MTAD being more aggressive than EDTA. These demineralized dentin zones create the opportunity for dentin hybridization by infiltration of hydrophilic adhesives/sealers. However, the potential consequences of compaction of hydrophobic sealers against air-dried, collapsed collagen matrices, and hydrolytic degradation of incompletely infiltrated matrices remain unresolved.

Bicuspid↗

Micro-tensile bond strengths to sclerotic dentin using a self-etching and a total-etching technique.

OBJECTIVES: To evaluate the in vitro regional micro-tensile bond strengths of a self-etching/self-priming adhesive system to sclerotic dentin, in the absence or presence of phosphoric acid conditioning. METHODS: Naturally-occurring, non-carious cervical lesions on extracted premolars were hand-cleaned with a slurry of pumice and chlorhexidine, then bonded without further cavity preparation. One group was bonded using Clearfil Liner Bond 2V (Kuraray Co. Ltd., Osaka, Japan). The other group was first conditioned with K-etchant; 40% phosphoric acid gel (Kuraray) prior to the application of the self-etching primer. Artificially prepared wedge-shaped cavities were also made in sound premolars and bonded with the two methods as controls. Resin composite build-ups were made using Clearfil Protect Liner F and AP-X resin composite (Kuraray). After storage in water for 24h, the teeth were sectioned into 0.7 x 0.7 mm composite-dentin beams along the occlusal and gingival walls, and at the apex of the lesions. The use of two conditioning methods, two substrate types, and three different locations yielded 10-14 beams for each of the 12 groups. After testing for the microTBS, representative beams that were stressed to failure were examined with SEM. Remaining fractured beams were demineralized and processed for TEM examination. Statistical analysis was performed using a three-way ANOVA and Student-Newman-Keuls tests. RESULTS: Regardless of the conditioning methods, bond strengths to sound dentin were significantly higher than to sclerotic dentin (P< 0.05). With sclerotic dentin, there was no significant difference for the conditioning methods used, except that K-etchant significantly improved the bond strength at the gingival aspect of the lesions. Fractographic analysis revealed that the self-etching primer could not etch beyond the surface hypermineralized layer of sclerotic dentin. Interfacial failure occurred along the surface of the mineralized intermicrobial matrix and/or hypermineralized layer. With the use of phosphoric acid, a hybrid layer was only seen when the surface layers were thin. Incompletely removed sclerotic casts were evident in both groups. SIGNIFICANCE: Removal of the surface layers of sclerotic dentin and/or conditioning with stronger acids may be beneficial to obtain stronger bonding to sclerotic dentin.

Acid Etching, Dental↗

Sealing evaluation of the cervical base in intracoronal bleaching.

Discoloration of non-vital teeth is an esthetic deficiency frequently requiring bleaching treatment. The purpose of this study was to evaluate in vitro the cervical base efficacy in order to prevent or to minimize the leakage along the root canal filling and into the dentinal tubules. Thirty-eight extracted single-root human teeth were used, which were biomechanically prepared, filled, and divided into three experimental groups: G1, a cervical base was applied (3 mm of thickness) below the cemento-enamel junction, with resin-modified glass-ionomer cement (Vitremer); G2, the base was done with glass-ionomer cement (Vidrion R); and G3 (Control), did not receive any material as base. A mixture of sodium perborate and hydrogen peroxide 30% was placed inside the pulp chamber for 3 days, and the access opening was sealed with Cimpat. This procedure was repeated thrice. Soon after this, a paste of calcium hydroxide was inserted into the pulp chamber for 14 days. All teeth were covered with two layers of sticky wax, except the access opening, and immersed in blue India Ink for 5 days. The results did not show statistically significant differences between the three groups concerning the leakage inside the dentinal tubules. Regarding the apical direction, a statistical difference (ANOVA P < 0.05) was observed among the experimental group G1 and control group G3. No statistically significant difference was observed between G2 and G3 groups. Therefore, the placement of a cervical base before internal bleaching procedures is still recommended.

Analysis of Variance↗

Permeability characteristics of bovine and human dentin under different pretreatment conditions.

In order to use bovine dentin instead of human dentin for in vitro adhesion and cytotoxicity tests the permeability characteristics of human and bovine dentin should be similar. In the present study hydraulic conductance (Lp) and diffusional water flux (J5) of human and bovine dentin slices were compared. The permeability experiments were performed in a split chamber using tritiated water in physiological saline. Lp and Js of bovine dentin were 0.7- to 2.4-fold and 1.1- to 3.5-fold that of human dentin (not statistically significant). For human and bovine dentin Lp and Js increased with etching and showed an inverse linear relationship (r > or = 0.7) with dentin thickness. The variability of bovine data was low (perfusion = 30%, diffusion = 22%) and about half that of the human data. In conclusion bovine dentin near the cementoenamel junction seems to be a suitable alternative for coronal human dentin for in vitro tests with respect to transdentinal permeability characteristics.

Acid Etching, Dental↗

Hybridization effectiveness of a two-step versus a three-step smear layer removing adhesive system examined correlatively by TEM and AFM.

PURPOSE: The objectives of this study were (1) to compare the hybridization effectiveness of two adhesive systems that are applied in respectively three and two steps, and (2) to determine the best resin-dentin interface preparation technique for atomic force microscopy (AFM). MATERIALS AND METHODS: The resin-dentin interface produced by the three-step OptiBond Dual-Cure (Kerr) and its simplified two-step successor OptiBond Solo (Kerr) was ultramorphologically examined using transmission electron microscopy (TEM) and AFM. Four different methods were used to prepare interface specimens for AFM: (1) polishing to a 0.1-micron finish with a silicon oxide suspension, (2) polishing to a 0.05-micron finish with an aluminum oxide suspension, (3) argon-ion etching, and (4) sectioning with a diamond knife. RESULTS: Both TEM and AFM demonstrated that some collapse of the exposed collagen fibril network, due to gentle postconditioning air-drying of the dentin surface, may not have been totally recovered through hybridization by the two-step adhesive formulation as opposed to the three-step precursor. From the four interface preparation methods, only diamond-knife sectioning revealed sufficient ultramorphologic detail and high resolution that can capitalize on the high resolution offered by AFM. CONCLUSION: First, the findings suggest that simplifying the application procedure of adhesives by combining the primer and adhesive resin into a single application step may reduce hybridization effectiveness. Future research should confirm this effect for other two- versus three-step adhesive systems. Second, diamond-knife sectioning should be used for future topographic imaging and physicomechanical testing of resin-dentin interfaces by AFM.

Bisphenol A-Glycidyl Methacrylate↗

A comparative SEM study of smear layer removal by detergents and EDTA on the root surface.

The present study performed an SEM evaluation of the efficiency of the following detergents on smear layer removal on the root surface: sodium lauryl sulphate, Plax, castor oil, and EDTA 24%. Sodium lauryl sulphate did not remove the smear layer and showed the worst results of all detergents tested. Plax and castor-oil detergents showed similar results represented by partial removal of the smear layer; these results were better than those obtained in the control (physiologic serum) and sodium lauryl sulphate groups. Neutral EDTA 24% was the most efficient detergent for smear layer removal.

Benzoates↗

Sterilization of human teeth: its effect on permeability and bond strength.

Extracted human teeth were randomly divided into three groups. Group 1 teeth were untreated and served as controls. Group 2 teeth were sterilized in a steam autoclave. Group 3 teeth were sterilized by exposure to ethylene oxide gas. Crown segments were then prepared from these teeth by resection of the roots at the CEJ and the occlusal enamel to expose a flat occlusal plane of dentin. The permeability of the dentin was determined to be similar in all three groups. The shear bond strength of Prisma Universal Bond 3 and C&B Metabond was also similar in all groups indicating that sterilization of teeth does not alter dentin permeability or bond strength.

Boron Compounds↗

[In vitro study of the effects of 10-30 % hydrogen peroxide solutions on the surface of human tooth enamel].

The aim of the present study was to investigate the effects of hydrogen peroxide solutions (10-30%) on the enamel surface and the inner structure of human teeth. Prepared enamel samples were exposed to various concentrations of hydrogen peroxide solutions for one hour. Changes in the enamel were analyzed by two different methods. The inner structure was studied by the Ellman's reagent to detect possible changes in the amount of free thiol groups in the remaining organic phase of matured enamel. Surface alterations were imaged by atomic force microscope. Ellman's reaction revealed the presence of three groups of free thiols: one with easy, the second one with medium and the third one with difficult accessibility by hydrogen peroxide. Atomic force microscopy revealed severe alterations on the enamel surface after treatment with both low and high concentration of hydrogen peroxide. Our observations indicated that hydrogen peroxide induced alterations in the surface structure and in the inner phases of mature enamel in both low and high concentrations.

Anti-Infective Agents, Local↗

The rôle of a dentine-bonding agent in reducing cervical dentine sensitivity.

This double-blind split-mouth trial with 16 adult patients investigated the ability of a dentine bonding agent (DBA) to reduce cervical dentine sensitivity. Following stimulation of pairs of teeth by conventional tactile and air blast stimuli, together with controlled evaporative and cold fluid stimuli, sensitivity was recorded using tactile threshold, visual-analogue scale (VAS) and short-form McGill pain questionnaire (SFMPQ), prior to and 1 week following treatment with DBA. Prior to assessment, subjects recorded their perceived overall sensitivity using VAS and SFMPQ. Application of each stimulus was separated by 10 min. Sensitivity was recorded by a clinician blinded to the treatment status of each tooth. The control tooth was treated by applying DBA to coronal enamel. Dietary information was collected after the post-treatment assessment. There was a significant (p<0.05) improvement in tactile threshold and air flow and air blast VAS scores, together with reductions in sensitivity to evaporative stimuli when assessed by SFMPQ. Treatment response was not influenced by the subjects' age, gender, diet, use of fluoride-containing or silica-based toothpastes or fluoride mouthwashes, or a history of previous sensitivity treatment. It is concluded that topical application of DBA is an effective way to reduce cervical dentine sensitivity.

Adult↗

Adsorption of 2-hydroxyethyl methacrylate on dentin from aqueous solution.

The adsorption of 2-hydroxyethyl methacrylate (HEMA) on bovine dentin from aqueous solution was examined to clarify the priming effects of HEMA on dentin bonding. HEMA adsorption was characterized by: (1) slow attainment of equilibrium at higher concentrations (after 72 h); (2) a linear isotherm with a maximum possible adsorption, where an abrupt horizontal plateau occurred; (3) the large adsorption of ca. 2.5% by weight at the plateau; and (4) a vertical initial slope of the isotherm. The morphological difference between dentin powder surfaces before and after adsorption could not be determined. After heating, however, dentin powder which adsorbed HEMA was more resistant to demineralization with 6N HCl than the powder which did not adsorb. SEM examinations demonstrated that there was a demineralization-resistant dentin layer in tooth which adsorbed HEMA. The results indicated that HEMA infiltrated into intertubular dentin during adsorption.

Adsorption↗

Changes in the vascular network of the oral epithelium and reduced enamel epithelium during tooth eruption.

The purpose of this study was to examine the vascular network beneath the reduced enamel epithelium (REE) and oral epithelium (OE) during tooth eruption. Using the corrosive-resin casting method, vascular resin casts were prepared from premolar and molar teeth of the dog and examined by scanning electron microscopy. The vascular network beneath the REE is arranged in two layers, an inner layer consisting of a dense capillary network and an outer layer composed primarily of arterioles and venules. Throughout tooth eruption, the configuration of the vessels of the inner layer is continually changing from a network of capillary loops to a fishnet pattern, whereas the arrangement of the vessels of the outer layer remains fairly constant. When the crown emerges into the oral cavity, leakage of resin from the vessels provides evidence of increased vascular permeability, suggesting the presence of inflammation within the marginal gingiva. When root development is nearly complete, the vascular network adjacent to the REE becomes continuous with that of the OE. The inner margin of the free gingiva receives its blood supply from this network, and the vessels of this network also give off branches which anastomose with the capillary network of the periodontal ligament.

Animals↗

In vitro dentine permeability evaluation of HEMA-based (desensitizing) products using split-chamber model following in vivo application in the dog.

The aim of this study was to evaluate in vitro dentine permeability evaluation of 2-Hydroxyethyl methacrylate (HEMA)-based desensitizing products using split-chamber model following in vivo application in the dogs for three experimental time periods of 1 week, 1 month and 3 months. Buccal enamel of upper and lower canines of nine young dogs was removed and flat dentinal surface was obtained using a water-cooled diamond bur. The dentinal surface divided into four quarters, three experimental and a control. Health-Dent and Gluma Desensitizing agent and Single bond were applied to respective quarters of one tooth, according to manufacturers' instructions. The last quarters were left as control without any applications. For the each experimental period, 10 dentine samples from each group including control were used to measure the hydraulic conductance values. The dentine discs were placed pulp-side down in a split-chamber device in which the plastic spacers containing the rubber 0 rings have a surface area of 1 mm(2) and permeability was measured by fluid filtration. The data were expressed as hydraulic conductance (Lp). Differences in dentine permeability obtained for the desensitizing agents against the control were tested for statistical significance using Kruskal-Wallis one-way ANOVA and Bonferroni-adjusted Mann-Whitney U-tests. Differences in permeability in three time periods for each desensitizing agent were analysed using Friedman's anova and Wilcoxon signed rank tests. All desensitizing applications caused decreased Lp values compared with the control Lp value at the end of 1 week. In the 1-month samples, between the Lp values of Single bond and control, no statistical difference was found (P > 0.05). At the end of the 3-month period, the Gluma Desensitizing agent had the lowest the Lp value (P < 0.05). The result of this study is that the topical application of desensitizing agents led to decrease in dentine permeability in the dog model. The Gluma Desensitizing agent provide the more lasting tubule-occluding effect than the other material tested in this model.

Animals↗

Effectiveness and dentin bond strengths of two materials for reinforcing thin-walled roots.

OBJECTIVES: To investigate the effectiveness of two restorative materials for reinforcing thin-walled roots and their microtensile bond strengths to root canal dentin. METHODS: Twenty-one decoronated maxillary central incisor roots were root filled and the canals enlarged to leave approximately 1.0 mm thick dentin walls. The roots were distributed randomly to three equal groups. Group 1 (control): a large tapered cast post-core was fabricated. Group 2 (BIS-CORE): a thick layer of dual-cured composite was placed in the post-hole before fabrication of a small-diameter tapered cast post-core. Group 3 (ChemFil Superior): a thick layer of glass-ionomer was placed, as before. Metal-ceramic crowns were fabricated for all teeth. Microtensile bond strength tests and optical and atomic force microscope observations were employed to examine adhesion between the two restorative materials and the root canal dentin. RESULTS: Mechanical loading (kN) demonstrated that composite 0.64 (S.D. 0.05), but not glass-ionomer 0.49 (0.05), significantly reinforced the fracture resistance of thin-walled roots, P<0.001. Microtensile bond strengths (MPa) were 21.7 (1.6) for composite and 12.9 (1.7) for glass-ionomer, P=002. SIGNIFICANCE: A thick intermediate layer of resin-bonded composite, sandwiched between the root dentin and a small-diameter cast Ni-Cr post or dowel, increased significantly the fracture resistance of the roots.

Adult↗

2000 Judson C. Hickey Scientific Writing Award. Effect of impression materials on hybridized dentin.

STATEMENT OF PROBLEM: Tooth sensitivity after crown preparation is not an uncommon complication. For dentin bonding agents to be effective in preventing postoperative sensitivity, they must remain intact throughout the fixed prosthodontic procedures. PURPOSE: This study evaluated, by analyzing the change in dentin permeability, whether a dentin bonding agent was removed from the surface of prepared teeth in the process of making an impression. MATERIAL AND METHODS: Eighty extracted human molars were cut horizontally apical to the cemento-enamel junction and horizontally through the middle of the clinical crown. The specimens were prepared to measure dentin permeability (fluid flow rate, Lp). The specimens (n = 40) were randomly assigned to either the primer-only group (PO) or the primer + adhesive group (PA). Five different impression materials were tested: vinyl polysiloxane, polyether, polysulfide, irreversible hydrocolloid, and reversible hydrocolloid. Dentinal permeability was measured after smear layer removal (control, etched Lp = ELp), after coating the dentin with either PO or PA (coated Lp = CLp), and again after making an impression (impression Lp = ILp). A 1-way ANOVA of differences, followed by a Student-Newman-Keuls test (alpha=.05), was performed to compare the ELp, CLp, and ILp values. RESULTS: A statistically significant difference was found between the CLp and ELp for all 5 impression materials in both groups (PO and PA). No difference was found between the CLp and ILp values for any of the impression materials. No significant differences were found between any of the 5 impression materials or either of the dentin surface treatments (PO or PA) when measuring the CLp and ILp. CONCLUSION: The dentin bonding agent had a significant effect in decreasing the Lp of the treated specimens. None of the impression materials significantly affected the measured CLp. There was no significant difference between the PO or PA (CLp) values.

Acid Etching, Dental↗

The effect of a self-etching primer on the continuous demineralization of dentin.

Self-etching primers (SEP), used for adhesion of resin restorations, contain an acidic monomer that is not rinsed off after application; therefore, residual acid could further demineralize dentin, jeopardizing adhesion. This study evaluated whether dentin demineralization continues after a 20-s application of a SEP and also after polymerization of the adhesive. Surface recession was measured, using atomic force microscopy (AFM), between the masked surface and dentin etched with SEP (Clearfil SE Bond) or phosphoric acid (pH 1.94) immediately, 5 min, 2 h or 12 h after application. AFM-based nanoindentations were performed to determine mechanical property profiles across resin-bonded interfaces of two sequence groups: SG 1, where the adhesive was applied and polymerized immediately after application of the primer and specimens were immersed in Hank's solution after 5 min, 2 h and 12 h; or SG 2, where specimens were placed in an incubator before the application of the adhesive, for the same time periods. Significant surface recession occurred over time for all groups, except for SEP before desiccation. Nanoindentations yielded decreased hardness and elastic modulus below the hybrid layer after application of the initial primer, even after polymerization of the adhesive. The results reveal a demineralized dentin zone below the hybrid layer formed by the SEP, not fully protected by the adhesive, which could jeopardize bond strength.

Acid Etching, Dental↗

Progression of sealed initial bovine enamel lesions under demineralizing conditions in vitro.

The use of sealants for the infiltration of proximal enamel lesions could be a promising alternative to the common strategies of remineralization and operative treatment. The aim of the present study was to compare the progression of sealed initial enamel lesions after exposure to a demineralizing solution in vitro. In each of 54 bovine enamel specimens three subsurface lesions were created. Two of the lesions were etched with phosphoric acid and sealed with either a fissure sealant or with various adhesives (1-5) for 15 s or 30 s, respectively, whereas one lesion remained as the untreated control. Subsequently, half of each specimen was covered with nail varnish (baseline) and the other half was reexposed to a demineralizing solution for 14 days (experimental). The specimens were cut perpendicularly to the surface, infiltrated with a low-viscosity fluorescent resin and observed with a confocal laser scanning microscope (CLSM). For lesions sealed with the fissure sealant and adhesives 1-3, the progression of lesion depth (0-31 microm) was significantly decreased (p<0.01; paired t test) compared with the untreated control (57 microm). For the fissure sealant and adhesives 1 and 3 extended penetration times (30 s) resulted in significantly reduced lesion progression compared to 15 s. It can be concluded that filling of the pores in initial enamel lesions with the fissure sealant and adhesives 1-3 can inhibit further demineralization in vitro.

Acrylates↗

Penetration of varnishes into demineralized root dentine in vitro.

In this paper the penetration of three different varnishes employed in caries prevention (Duraphat, Fluor Protector and Cervitec) into demineralized dentine is quantified using confocal laser scanning microscopy. The results show that the varnish penetration into lesions about 85 microns in depth if for Cervitec about 35 microns and considerably less for Duraphat and Fluor Protector. The penetration is into the dentinal tubules and is influenced by dentinal tubule direction. The drying procedure--pretreatment of the dentine--influences the penetration, though sizeably only for Cervitec applications. This paper shows that varnish penetration into the tissue and presumably 'sealing' tubules completely or partly is valuable with respect to root caries prevention and hypersensitivity.

Adolescent↗

Clinical evaluation of a one-bottle bonding system for desensitizing exposed roots.

PURPOSE: To evaluate the effectiveness of a one-bottle adhesive system as a desensitizing treatment, with or without a prior phosphoric acid-etch step. MATERIALS AND METHODS: Two different clinical procedures using a one-bottle adhesive bonding system were tested for its efficacy on desensitizing exposed roots. Thirty subjects with a history of dentin hypersensitivity were selected and 60 exposed sensitive teeth were divided into two groups (n = 30). In Group 1 samples, Scotchbond 1 bonding system (Single Bond in USA) was applied without a prior acid-etching, while in those of Group 2, the exposed sensitive roots were acid-etched with 35% phosphoric acid for 15 seconds, prior to application of bonding agents. The sensitivity was evaluated at 0, 1, 2, 4 weeks and 3 months using cold air blast stimuli, and recorded using a visual-analogue scale. The scores were analyzed as non-parametric data by means of the Mann-Whitney and Sign tests. Five samples from each group were randomly selected in order to make scanning electron microscope observations of the sensitive dentin surfaces at baseline and at each recall using the replica technique. RESULTS: At baseline, after both desensitizing procedures all the patients reported distinct reductions in dentin sensitivity. At 1- and 2-week recalls, 20 teeth of Group 1 and 17 teeth in Group 2 exhibited a return of sensitivity, and in five teeth in each group, the sensitivity score was between 5-8. During the first recall (1-2 weeks), the sensitive teeth were retreated and showed an immediate reduction of sensitivity. At the 1-month recall, eight teeth in Group 1 and four teeth in Group 2 showed a return of some sensitivity, and in six teeth in Group 1 and in three teeth in Group 2, old amalgam restorations were replaced and this procedure almost completely resolved the sensitivity. At the 3-month recall, only five teeth from each group showed residual mild sensitivity (score 1-2). For both Groups 1 and 2 there was a statistically significant (P < 0.0005) reduction in sensitivity levels between the baseline pain scores and immediately after treatment, and between the first recall pre-treatment pain scores and the last recall pain scores. Overall, the two methods of treatment demonstrated a general decrease in sensitivity in both groups over the 3-month study period, adequately solving the clinical and patients' perception of the discomfort of sensitivity. The SEM observations of the replicas showed a progressive loss of the adhesive resin from the treated surfaces. This fact was more evident in the non-etched samples (Group 2) than in those in Group 1. The results of this study showed that exposed root dentin sealed with Scotchbond 1, with or without prior acid-etching, did not show spontaneous sensitivity after 3 months.

Acid Etching, Dental↗