Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Powder Diffraction”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34Linked to original sources
PubMed2004

Synthesis, nuclear, and magnetic structures and magnetic properties of [Mn3(OH)2(SO4)2(H2O)2].

[Mn(3)(OH)(2)(SO(4))(2)(H(2)O)(2)] and its deuterated analogue were synthesized by a hydrothermal technique and characterized by differential thermal analysis, thermogravimetric analysis, and IR spectroscopy. Its nuclear structure, determined by single-crystal X-ray analysis and Rietveld analysis of neutron powder-diffraction data, consists of a 3D network of chains of edge-sharing Mn(1)O(6), running along the c axis, connected by the apices of Mn(2)O(6) and SO(4) units. It is isostructural to the nickel analogue. Determination of the magnetic structure and measurements of magnetization and heat capacity indicate the coexistence of both magnetic long-range ordering (LRO) and short-range ordering (SRO) below a Néel temperature of 26 K, while the SRO is retained at higher temperatures. The moments of the two independent Mn atoms lie in the bc plane, and that of Mn(1) rotates continuously by 54 degrees towards the c axis on decreasing the temperature from 25 to 1.4 K. While the SRO may be associated with frustration of the moments within a Mn(3) trimer, the LRO is achieved by antiparallel alignment of the four symmetry-related trimers within the magnetic unit cell. A spin-flop field, measured by dc and ac magnetization on a SQUID, is observed at 15 kOe.

Journal Article↗
PubMed2004

Supramolecular complexation of alkali cations through mechanochemical reactions between crystalline solids.

The organometallic zwitterion [Co(III)(eta(5)-C(5)H(4)COOH)(eta(5)-C(5)H(4)COO)] reacts quantitatively as a solid polycrystalline phase with a number of crystalline alkali salts MX (M = K(+), Rb(+), Cs(+), NH(4) (+); X = Cl(-), Br(-), I(-), PF(6)(-), although not in all cation/anion permutations) to afford supramolecular complexes of the formula [Co(III)(eta(5)-C(5)H(4)COOH)(eta(5)-C(5)H(4)COO)](2).M(+)X(-). In some cases, the mechanochemical complexation requires kneading of the two solids with a catalytic amount of water. The characterization of the solid-state products has been achieved by a combination of X-ray single-crystal and powder-diffraction experiments. The hydrogen-bonding interactions have been investigated by solid-state NMR spectroscopy. The mechanochemical reactions imply a profound solid-state rearrangement accompanied by breaking and forming of O-H...O hydrogen-bonding interactions between the organometallic molecules. All compounds could also be obtained by solution crystallization of the inorganic salts in the presence of the organometallic unit. The solid-state complexation of alkali cations by the organometallic zwitterion has been described as a special kind of solvation process taking place in the solid state.

Journal Article↗
PubMed2003

Synthesis, X-ray powder structure, and magnetic properties of layered NiII methylphosphonate, [Ni(CH3PO3)(H2O)], and NiII octadecylphosphonate, [Ni(CH3-(CH2)17-PO3)(H2O)].

[Ni(CH(3)PO(3))(H(2)O)] (1) and [Ni(CH(3)-(CH(2))(17)-PO(3))(H(2)O)] (2) were synthesised by reaction of NiCl(2).6 H(2)O and the relevant phosphonic acid in water in presence of urea. The compounds were characterised by elemental and thermogravimetric analyses, UV-visible and IR spectroscopy, and their magnetic properties were studied by using a SQUID magnetometer. The crystal structure of 1 was determined "ab initio" from X-ray powder diffraction data and refined by the Rietveld method. The crystals of 1 are orthorhombic, space group Pmn2(1), with a=5.587(1), b=8.698(1), c=4.731(1) A. The compound has a hybrid, layered structure made up of alternating inorganic and organic layers along the b direction of the unit-cell. The inorganic layers consist of Ni(II) ions octahedrally coordinated by five phosphonate oxygen atoms and one oxygen atom from the water molecule. These layers are separated by bilayers of methyl groups and van der Waals contacts are established between them. A preliminary structure characterisation of compound 2 suggests the crystallisation in the orthorhombic system with the following unit-cell parameters: a=5.478(7), b=42.31(4), c=4.725(3) A. The oxidation state of the Ni ion in both compounds is +2, and the electronic configuration is d(8) (S=1), as determined from static magnetic susceptibility measurements above 50 K. Compound 1 obeys the Curie-Weiss law at temperatures above 50 K; the Curie (C) and Weiss (theta) constants were found to be 1.15 cm(3) K mol(-1) and -32 K, respectively. The negative value of theta indicates an antiferromagnetic exchange coupling between near-neighbouring Ni(II) ions. No sign of 3D antiferromagnetic long-range order is observed down to T=5 K, the lowest measured temperature. Compound 2 is paramagnetic above T=50 K, and the values of C and theta were found to be 1.25 cm(3) K mol(-1) and -24 K, respectively. Below 50 K the magnetic behavior of 2 is different from that of 1. Zero-field cooled (zfc) and field-cooled (fc) magnetisation plots do not overlap below T=21 K. The irreversible magnetisation, DeltaM(fc-zfc), obtained as a difference from fc and zfc plots starts to increase at T=20 K, on lowering the temperature, and it becomes steady at T=5 K. The presence of spontaneous magnetisation below T=20 K indicates a transition to a weak-ferromagnetic state for compound 2.

Journal Article↗
PubMed2004

Structure-property correlation of a new family of organogelators based on organic salts and their selective gelation of oil from oil/water mixtures.

Organic salts based on dicyclohexylamine and substituted/unsubstituted cinnamic acid exhibit efficient gelation of organic fluids, including selective gelation of oil from an oil/water mixture. Among the cinnamate salts, dicyclohexylammonium 4-chlorocinnamate (1), 3-chlorocinnamate (2), 4-bromocinnamate (3), 3-bromocinnamate (4), 4-methylcinnamate (5) and the parent cinnamate (6) are gelators, whereas 2-chlorocinnamate (7), 2-bromocinnamate (8), 3-methylcinnamate (9), 2-methylcinnamate (10) and hydrocinnamate (11) are non-gelators. Non-gelation behaviour of 11 and various benzoate derivatives 12-18 indicate the significance of an unsaturated backbone in the gelation behaviour of the cinnamate salts. A structure-property correlation based on the single-crystal structures of most of the gelators (1, 3, 5 and 6) and non-gelators, such as 7, 8, 10-18, indicates that the prerequisite for the one-dimensional (1D) growth of the gel fibrils is mainly governed by the 1D hydrogen-bonded network involving the ion pair. All the non-gelators show either two- (2D) or zero-dimensional (0D) hydrogen-bonded assemblies involving the ion pair. The molecular packing of the fibres in the xerogels of 1, 3, 5 and 6 has also been established on the basis of their simulated powder diffraction patterns, XRPD of bulk solids and xerogels. Ab initio quantum chemical calculations suggests that pi-pi interactions is not a contributing factor in the gelation process.

Journal Article↗
PubMed2004

Interstitial Zn atoms do the trick in thermoelectric zinc antimonide, Zn4Sb3: a combined maximum entropy method X-ray electron density and ab initio electronic structure study.

The experimental electron density of the high-performance thermoelectric material Zn4Sb3 has been determined by maximum entropy (MEM) analysis of short-wavelength synchrotron powder diffraction data. These data are found to be more accurate than conventional single-crystal data due to the reduction of common systematic errors, such as absorption, extinction and anomalous scattering. Analysis of the MEM electron density directly reveals interstitial Zn atoms and a partially occupied main Zn site. Two types of Sb atoms are observed: a free spherical ion (Sb3-) and Sb2(4-) dimers. Analysis of the MEM electron density also reveals possible Sb disorder along the c axis. The disorder, defects and vacancies are all features that contribute to the drastic reduction of the thermal conductivity of the material. Topological analysis of the thermally smeared MEM density has been carried out. Starting with the X-ray structure ab initio computational methods have been used to deconvolute structural information from the space-time data averaging inherent to the XRD experiment. The analysis reveals how interstitial Zn atoms and vacancies affect the electronic structure and transport properties of beta-Zn4Sb3. The structure consists of an ideal A12Sb10 framework in which point defects are distributed. We propose that the material is a 0.184:0.420:0.396 mixture of A12Sb10, A11BCSb10 and A10BCDSb10 cells, in which A, B, C and D are the four Zn sites in the X-ray structure. Given the similar density of states (DOS) of the A12Sb10, A11BCSb10 and A10BCDSb10 cells, one may electronically model the defective stoichiometry of the real system either by n-doping the 12-Zn atom cell or by p-doping the two 13-Zn atom cells. This leads to similar calculated Seebeck coefficients for the A12Sb10, A11BCSb10 and A10BCDSb10 cells (115.0, 123.0 and 110.3 microV K(-1) at T=670 K). The model system is therefore a p-doped semiconductor as found experimentally. The effect is dramatic if these cells are doped differently with respect to the experimental electron count. Thus, 0.33 extra electrons supplied to either kind of cell would increase the Seebeck coefficient to about 260 microV K(-1). Additional electrons would also lower sigma, so the resulting effect on the thermoelectric figure of merit of Zn4Sb3 challenges further experimental work.

Journal Article↗
PubMed2004

Compressed octahedral coordination in chain compounds containing divalent copper: structure and magnetic properties of CuFAsF6 and CsCuAlF6.

Crystal structures and magnetic investigations of CuFAsF6 and CsCuAlF6 are reported. Together with KCuAlF6, these appear to be the only examples of Jahn-Teller pure Cu(II) compounds containing only one type of ligand that exhibits a compressed octahedral coordination geometry. The Rietveld method has been used for refining the CsCuAlF6 structure based on neutron powder diffraction data at 4 K. The compound crystallizes in space group Pnma (no. 62) with a=7.055(1), b=7.112(1), c=10.153(1) A and Z=4 at 4 K. The structure is built from infinite [CuF5]n(3n-) chains of [CuF6]4- octahedra running along the [1 0 0] direction and (AlF6)3- octahedra connected by corners in the trans position, thus giving rise to chains oriented along the [0 1 0] direction. Single crystals of CuFAsF6 were prepared under solvothermal conditions in AsF5 above its critical temperature. The structure was determined from single-crystal data. CuFAsF6 crystallises in the orthorhombic space group Imma (No. 74) with a=10.732(5), b=6.941(3), c=6.814(3) A and Z=4 at 200 K. The structure can also be described in terms of one-dimensional infinite [CuF5]n(3n-) chains of tilted [CuF6](4-) octahedra linked by trans-vertices running along the b axis. The [CuF5]n(3n-) chains are connected through [AsF6]- units sharing joint vertices. The compressed octahedral coordination of CuII atoms in CuFAsF6 and CsCuAlF6 compounds at room temperature is confirmed by Cu K-edge EXAFS (extended x-ray absorption fine structure) analysis. For both compounds strong antiferromagnetic interactions within the [CuF5]n(3n-) chains were observed (theta(p)=-290+/-10 K and theta(p)=-390+/-10 K for CuFAsF6 and CsCuAlF6, respectively). The peculiar magnetic behaviour of chain compounds containing divalent copper at low temperature could be related to uncompensated magnetic moments in the one-dimensional network.

Journal Article↗
PubMed2004

Atmospheric pressure chemical vapor deposition: an alternative route to large-scale MoS2 and WS2 inorganic fullerene-like nanostructures and nanoflowers.

Large-scale MoS2 and WS2 inorganic fullerene-like (IF) nanostructures (onionlike nanoparticles, nanotubes) and elegant three-dimensional nanoflowers (NF) have been selectively prepared through an atmospheric pressure chemical vapor deposition (APCVD) process with the reaction of chlorides and sulfur. The morphologies were controlled by adjusting the deposition position, the deposition temperature, and the flux of the carrier gas. All of the nanostructures have been characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). A reaction mechanism is proposed based on the experimental results. The surface area of MoS2 IF nanoparticles and the field-emission effect of as-prepared WS2 nanoflowers is reported.

Journal Article↗
PubMed2005

Structure-property correlations in solid solutions of (CuI)8P12-xAsx, 2.4< or = x < or =6.6.

A series of P/As mixed pnicogen phases of composition (CuI)(8)P(12-x)As(x), in which x = 2.4, 4.2, 4.8, 5.4, and 6.6, have been synthesized and characterized by X-ray single crystal and powder diffraction, solid-state NMR spectroscopy, thermal gravimetric analysis, and impedance spectroscopy. These materials are isostructural to (CuI)(8)P(12) and consist of neutral, tubular P/As mixed pnicogen chains associated with Cu(I) and I(-) ions. The As is distributed throughout the pnicogen chains; however, the "roof" sites of the [P8] cage show preferred occupation by As relative to the other sites. Accordingly, the change in cell volume is not a linear function of the As incorporation. Solid-state (31)P NMR spectroscopy of the 40 % As incorporated sample are consistent with the X-ray structural model, with extensive broadening due to (31)P-(75)As coupling and site disorder, and a change in the chemical shifts of the resonances due to the As substitution into the lattice. The degree of copper ion site disorder, probed by single-crystal X-ray diffraction, increases with increasing As content. Although very little change is observed in the copper ionic conductivity of polycrystalline samples, which ranges from 1.8-5.1 x 10(-6) S cm(-1) for (CuI)(8)P(12-x)As(x), x = 0, 4.2, 5.4; a single crystal (x = 4.8) measured along the needle axis has a conductivity of 1.7 x 10(-3) S cm(-1) at 128 degrees C. This represents an order of magnitude improvement in conductivity over (CuI)(8)P(12) at the same temperature.

Arsenic↗
PubMed2005

Intramolecular hydrogen-bond-assisted planarization of asymmetrically functionalized alternating phenylene-pyridinylene copolymers.

We report on the synthesis and characterization of a series of asymmetrically functionalized amphiphilic polymers with alternating pi-donor units (e.g., substituted benzene) and pi-acceptor units (e.g., pyridine) along the polymer backbone. The purpose of our present work involves incorporation of functional groups along the main chain to form intrachain hydrogen bonds, which promote planarization of the polymer backbone, and to fine-tune the optical properties. The structure-property relationship of polymers P1-P6 was investigated by means of analytical methods, such as FTIR spectroscopy, 1H and 13C NMR spectroscopy, UV/Vis spectroscopy, fluorescence spectroscopy, gel permeation chromatography, thermogravimetric analysis, cyclic voltammetry, and X-ray powder diffraction. All polymers were soluble in common organic solvents, and the optical and fluorescence spectra of the polymers showed significant changes according to the formation (P4, P5) or absence (P6) of intramolecular hydrogen bonding along the polymer backbone. Moreover, the 2,6- or 3,5-linkage of the pyridine rings in P5 and P6, respectively, reduced the conjugation along the polymer backbone and this is reflected in their optical properties. The optical properties of the polymers were influenced by the addition of acid (P1-P6), base (P4-P6), and metal ions (e.g., Cu2+, Fe3+, Ag+, Ni2+, Pd2+, Mn2+, Zn2+, Mg2+, and Pr3+). Such polymers could be used in various applications, including sensors and stimuli-responsive displays.

Journal Article↗
PubMed2006

Ba2[Ni3N2]: a low-valent nitridonickelate-synthesis, crystal structure, and physical properties.

The ternary alkaline-earth nitridonickelate Ba2[Ni3N2] (Ba2[NiI2Ni0N2]) was prepared by the reaction of mixtures of Ba2N and Ni in nitrogen gas of ambient back-pressure at 1173 K. The crystal structure determined by X-ray single-crystal and powder diffraction methods as well as from neutron diffraction data at various temperatures between 2 and 298 K is orthorhombic (Cmca (no. 64), 298 K: a=715.27(18) pm, b=1032.99(21) pm, c=740.12(20) pm) and provides the first example of a nitridonickelate with a two-dimensional complex anion. The Ni2 atom is described with a split position and the corresponding superstructure variants are investigated by theoretical full-potential nonorthogonal local-orbital calculations (FPLO). The average oxidation state of Ni in Ba2[Ni3N2] is +0.67, the lowest average value observed in nitridonickelates so far. Investigations of the physical properties demonstrate that Ba2[Ni3N2] acts as a "poor" metal with a large resistivity of approximately 2.7 mOmega cm at 300 K and exhibits low-dimensional magnetism with antiferromagnetic ordering at T approximately 90 K. XAS spectra correspond with low-valent Ni states.

Journal Article↗
PubMed2007

Structures of the high-temperature solid phases of the odd-numbered fatty acids from tridecanoic acid to tricosanoic acid.

Crystal structures of the high-temperature phases of odd-numbered fatty acids (C(n)H(2n-1)OOH) from tridecanoic acid (C(13)H(25)OOH) to tricosanoic acid (C(23)H(45)OOH) are presented in this article. They have been determined from high-quality X-ray powder-diffraction patterns. Two types of high-temperature phases are adopted: one monoclinic A2/a with Z=8 for the fatty acids with n=13 and n=15, denoted as C'', and one monoclinic P2(1)/a with Z=4 for the longer-chain fatty acids, denoted as C'. It appears that the packing arrangement of the alkyl chains and of the carboxyl groups is similar in all of the structures. However, the arrangement at the methyl-group interface differs between the C' and C'' forms. A survey of the intermolecular interactions involved in these polymorphs coupled with a study of the effects of temperature on the structures have led us to a better understanding of the arrangement of the molecules within the high-temperature solid phases of odd-numbered fatty acids.

Journal Article↗
PubMed2007

The combined catalytic action of solid acids with nickel for the transformation of polypropylene into carbon nanotubes by pyrolysis.

The effects of both organically modified montmorillonite (OMMT) and Ni(2)O(3) on the carbonization of polypropylene (PP) during pyrolysis were investigated. The results from TEM and Raman spectroscopy showed that the carbonized products of PP were mainly multiwalled carbon nanotubes (MWNTs). Surprisingly, a combination of OMMT and Ni(2)O(3) led to high-yield formation of MWNTs. X-ray powder diffraction (XRD) and GC-MS were used to investigate the mechanism of this combination for the high-yield formation of MWNTs from PP. Brønsted acid sites were created in degraded OMMT layers by thermal decomposition of the modifiers. The resultant carbenium ions play an important role in the carbonization of PP and the formation of MWNTs. The degradation of PP was induced by the presence of carbenium ions to form predominantly products with lower carbon numbers that could be easily catalyzed by the nickel catalyst for the growth of MWNTs. Furthermore, carbenium ions are active intermediates that promote the growth of MWNTs from the degradation products with higher carbon numbers through hydride-transfer reactions. The XRD measurements showed that Ni(2)O(3) was reduced into metallic nickel (Ni) in situ to afford the active sites for the growth of MWNTs.

Journal Article↗
PubMed2007

Enhanced efficiency due to the use of achiral additives in the optical resolution of 1-phenylethylamine by its glutaric acid derivative.

Racemic 1-phenylethylamine was optically resolved by its own derivative formed with glutaric acid namely (+)-(R)-N-(1-phenylethyl)glutaramic acid. The amide acid resolving agent was synthesized from (+)-(R)-1-phenylethylamine by N-derivatization. The glutaric acid derivative was the next in a homologous series of dicarboxilic acid derivatized resolving agents of racemic 1-phenylethylamine. Resolution results obtained with the oxalic, malonic, and succinic acid derivatives were previously discussed(1). Each of the above derivative resolving agents could be successfully applied as resolving agents of 1-phenylethylamine. The efficiency of the present optical resolution using (+)-(R)-N-(1-phenylethyl)glutaramic acid resolving agent was remarkably inferior to the results obtained by its shorter chained homologues(1). Use of achiral additives, like urea, thiourea, N-methylurea, and N,N'-dimethylurea caused large increase in the efficiency of the resolution by (+)-(R)-N-(1-phenylethyl)glutaramic acid resolving agent. Precipitated salts obtained in the resolutions performed in the presence of the additives were investigated by thermoanalysis, X-ray powder diffraction, and optical microscopy. Based on the analytical data, the improvement of the resolution results was attributed to the influence of the additives on the crystal nucleation processes of the diasteromeric salts.

Journal Article↗
PubMed2005

Graphite powder and multiwalled carbon nanotubes chemically modified with 4-nitrobenzylamine.

We demonstrate that graphite powder and multiwalled carbon nanotubes (MWCNTs) can be derivatised by 4-nitrobenzylamine (4-NBA) simply by stirring the graphite powder or MWCNTs in a solution of acetonitrile containing 10 mM 4-NBA. We propose that 4-NBA partially intercalates at localised edge-plane or edge-plane-like defect sites and this hypothesis with a range of experimental data provided by electrochemistry in both aqueous and nonaqueous media, electron microscopy and X-ray powder diffraction.

Journal Article↗
PubMed2002

Synthesis and characterization of hydroxyapatite crystals: a review study on the analytical methods.

For the synthesis of hydroxyapatite crystals from aqueous solutions three preparation methods were employed. From the experimental processes and the characterization of the crystals it was concluded that aging and precipitation kinetics are critical for the purity of the product and its crystallographic characteristics. The authentication details are presented along with the results from infrared spectroscopy, X-ray powder diffraction, Raman spectroscopy, transmission and scanning electron photographs, and chemical analysis. Analytical data for several calcium phosphates were collected from the literature, extensively reviewed, and the results were grouped and presented in tables to provide comparison with the data obtained here.

Crystallization↗
PubMed2004

Preparation and in vitro bioactivity of zinc containing sol-gel-derived bioglass materials.

Bioactive glass material of the type CaO--P(2)O(5)--SiO(2)--ZnO was obtained by the sol-gel processing method. This material was produced both in powder and in disks form by compression of the powder. The obtained material was characterized by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and surface electron micrograph (SEM). The bioactivity was examined in vitro with respect to the ability of hydroxyapatite layer to form on the surface as a result of contact with simulated body fluid (SBF). The XRD and FTIR studies were conducted before and after contact of the material with SBF. The gel-derived materials were amorphous as shown by XRD, but were able to crystallize calcium phosphates on their surfaces when exposed to SBF. We also examined the alkaline phosphatase (AP) activity of osteoblasts, using human fetal osteoblastic cells (hFOB 1.19) cultured on the zinc bioglass, and compared it with the polystyrene plates. The bone cells consistently expressed higher AP activity in the zinc bioglass materials compared with the polystyrene plates, which indicates the zinc containing composition stimulates bone cells production of AP.

Bone Substitutes↗
PubMed2004

Structural studies of bioactivity in sol-gel-derived glasses by X-ray spectroscopy.

Extended X-ray absorption fine structure spectroscopy and X-ray absorption near edge structure, X-ray fluorescence spectroscopy, and X-ray powder diffraction have been used to study the local calcium environment in four sol-gel-derived bioactive calcium silicate glasses of the general formula (CaO)(x)(SiO(2))(1-x). The formation of a hydroxyapatite layer on the composition with the highest bioactivity (x = 0.3) with time has been studied, in an in vitro environment, by immersion in simulated body fluid (SBF) at 37 degrees C. The calcium oxygen environment in the four compositions has been shown to be six-coordinate in character. Both the extended X-ray absorption fine structure spectroscopy and X-ray absorption near edge structure show a gradual increase in coordination number and Ca--O bond distance with longer exposure to SBF. X-ray fluorescence show that calcium is quickly lost from the samples on exposure to SBF and the calcium concentration then recovers with time. There is clear evidence that the recovery of calcium content is due to the formation of a CaO-P(2)O(5)-rich layer. Annealing of samples at 650 degrees C shows the presence of what, on the length scales probed by X-ray diffraction, appears to be noncrystalline calcium phosphate after 1 h of exposure to an SBF solution, which becomes more crystalline on longer exposure.

Biocompatible Materials↗
PubMed2006

Synthesis, characterization, and in vitro 5-Fu release behavior of poly(2,2-dimethyltrimethylene carbonate)-poly(ethylene glycol)-poly(2,2-dimethyltrimethylene carbonate) nanoparticles.

Novel ABA-type amphiphilic triblock copolymers composed of poly (ethylene glycol) (PEG) as hydrophilic segment and poly (2,2-dimethyltrimethylene carbonate) (PDTC) as hydrophobic segment were synthesized by ring-opening polymerization of 2,2-dimethyltrimethylene carbonate (DTC) initiated by dihydroxyl PEG. The influence of introducing PEG block on crystalline behavior of PDTC segment was investigated by DSC. Polymeric micelles in aqueous medium were characterized by fluorescence spectroscopy and dynamic light scattering. The critical micelle concentration of these copolymers was in the range of 5.1-50.5 mg/L. Particle size was 80-280 nm. Core-shell-type nanoparticles were prepared by the dialysis technique. Zeta potential was measured by laser Doppler anemometry, and all nanoparticles had negative zeta potential. Transmission electron microscopy images demonstrated that these nanoparticles were spherical in shape. Anticancer drug 5-fluorouracil (5-Fu) as a model drug was loaded in the polymeric nanoparticles. X-ray powder diffraction demonstrated that 5-Fu was encapsulated into polymeric nanoparticles as molecular dispersion. In vitro cytotoxicity of nanoparticles was evaluated by MTT assay. In vitro release behavior of 5-Fu was investigated, and sustained drug release was achieved.

Antineoplastic Agents↗