Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Gold Compounds”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34Linked to original sources
PubMed2006

A traditional synthetic method, and a new structural motif, for molybdenum-gold clusters: synthesis and solid-state structure of Au8{Mo(CO)5}4(PPh3)4.

The neutral cluster [Au8Mo4(CO)20(PPh3)4] was synthesized in low yield from [AuCl(PPh3)] and [Mo2(CO)10]2- in acetonitrile at room temperature. The cluster was characterized by X-ray analysis, IR, and 31P NMR spectroscopy. Its solid-state structure consists of four Au(3)Mo tetrahedral units, fused by four Au atoms in a ring. The average bond lengths are Au-Au 2.77 Angstrom and Mo-Au 2.93 Angstrom. The internal angles of the planar square ring are very close to 90 degrees.

Acetonitriles↗
PubMed2003

A comparison of electron-transfer rates of ferrocenoyl-linked DNA.

Electron transfer (ET) through two configurations of double-stranded (ds)-DNA was investigated by the attachment of a ferrocenoyl (Fc)-labeled and thiol-labeled DNA to Au electrodes. The first configuration positions the Fc moiety on the same strand as the thiolate, whereas the second configuration positions the Fc group on the complementary strand. The subtle difference in structure leads to a difference in E0' values (29 mV) and in ET rate constants (25 vs 115 s-1). The results have led to a further understanding of electron transfer in ds-DNA, and several models of ET are proposed.

DNA↗
PubMed2003

When does gold behave as a halogen? Predicted uranium tetraauride and other MAu4 tetrahedral species, (M = Ti, Zr, Hf, Th).

Quantum chemical calculations suggest that a series of molecules with the general formula MAu4 are stable, where M = U, Th, and a group-4 atom. They correspond to Au in the formal valence state -1 and indicate that gold can act as a ligand similar to the halogen series. Of the MAu4 species studied, UAu4, the first predicted mixed gold uranium compound, has a short M-Au bond distance, 2.71 A, which would locate Au between Br and I from the bond length point of view in the U-tetrahalide series. Energetically, the U-Au bond is weaker than the corresponding U-Br and U-I bonds.

Journal Article↗
PubMed2003

Sub-100 nm confinement of magnetic nanoparticles using localized magnetic field gradients.

Ferromagnetic rods containing thin sections of diamagnetic metal create intense magnetic field gradients that attract and confine magnetic nanoparticles to regions of space as small as 20 nm. The rods (80 nm diameter) comprised alternating sections of CoNi ( approximately 350 nm) and Au (20-160 nm) formed by electrodeposition into porous polycarbonate membranes. Upon magnetizing the rods, large magnetic gradients (106-107 T/m) form at the boundaries between ferromagnetic and diamagnetic sections. These gradients attract and confine magnetic nanoparticles to attoliter volumes of space surrounding the rod. This method provides a new tool for generating intense, highly localized magnetic field gradients, by design, and confining magnetic nanoparticles in these gradients.

Cobalt↗
PubMed2004

Ultrasensitive electrocatalytic DNA detection at two- and three-dimensional nanoelectrodes.

Electrochemical DNA detection systems are an attractive approach to the development of multiplexed, high-throughput DNA analysis systems for clinical and research applications. We have engineered a new class of nanoelectrode ensembles (NEEs) that constitute a useful platform for biomolecular electrochemical sensing. High-sensitivity DNA detection was achieved at oligonucleotide-functionalized NEEs using a label-free electrocatalytic assay. Attomole levels of DNA were detected using the NEEs, validating the promise of nanoarchitectures for ultrasensitive biosensing.

Biosensing Techniques↗
PubMed2004

Platinum- and gold-catalyzed cycloisomerization reactions of hydroxylated enynes.

Exposure of enynes containing a hydroxyl group at one of the propargylic positions to catalytic amounts of either PtCl2 or (PPh3)AuCl/AgSbF6 results in a selective rearrangement with formation of bicyclo[3.1.0]hexan-3-one derivatives. The same products are obtained by a "one-pot" process on treatment of an alkynal with allylchlorodimethylsilane (4) and PtCl2 via a reaction cascade involving an initial platinum-catalyzed allylation followed by the cycloisomerization of the homoallylic alcohol formed in situ. This novel skeletal reorganization process was implemented into a concise total synthesis of the terpenes sabinone (18) and sabinol (19). Furthermore it is shown that conversion of the hydroxylated enynes into the corresponding acetates followed by reaction with a cationic gold catalyst formed from (PPh3)AuCl and AgSbF6 opens entry into isomeric products bearing the ketone function at the C-2 position of the bicyclo[3.1.0]hexane skeleton. The outcome of a deuterium labeling experiment and the analysis of the stereochemical course of the cycloisomerization reaction are consistent with the formation of cyclopropylmethyl platinum carbene species as reactive intermediates.

Alkenes↗
PubMed2006

Nitrene transfer reactions catalyzed by gold complexes.

We report here the first gold-catalyzed nitrene transfer reaction. A gold(I) compound, supported by 4,4',4' '-tri-tert-butyl-2,2':6',2' '-terpyridine (tBu3tpy) as the ligand, efficiently catalyzes olefin aziridination with the use of the commercially available oxidant PhI(OAc)2 and sulfonamides. This system also mediates carbene insertion into benzene.

Journal Article↗
PubMed2006

Pyrrole synthesis catalyzed by AgOTf or cationic Au(I) complexes.

Either silver trifluoromethanesulfonate or a mixture of gold(I) chloride, silver trifluoromethanesulfonate, and triphenylphosphine catalyze the formation of pyrroles from substituted beta-alkynyl ketones and amines. The reactions proceed by using 5 mol % of catalyst with yields of isolated pyrroles ranging from 13% to 92%. Sixteen examples are used to compare the effectiveness of each catalyst.

Amines↗
PubMed2006

Photoswitching behavior of a novel single molecular tip for noncontact atomic force microscopy designed for chemical identification.

A tripod molecule with an azobenzene arm was designed as a single molecular tip for noncontact atomic force microscopy (NC-AFM). The azobenzene moiety showed photoisomerization that enabled measurements of the same position of the sample by different tip apexes with different interactions. Photoswitching behavior of the molecule synthesized and adsorbed on Au surfaces was examined and reversible switching between the trans- and cis forms was successfully confirmed by NC-AFM measurements.

Adsorption↗
PubMed2006

Experimental and density functional theory study of the vibrational properties of 2-mercaptobenzimidazole in interaction with gold.

The vibrational properties of the 2-mercaptobenzimidazole (MBI) molecule in interaction with gold were examined by a combined approach of FTIR measurements and density functional theory (DFT). A complete assignment of the 42 normal modes of MBI has been performed on the basis of DFT calculations at the B3PW91 level in complement to the Raman and FTIR spectra. Calculations demonstrated that, on the deprotonated MBI molecule, the negative charge is localized on the sulfur atom, favoring the formation of a gold-sulfur bond upon reaction of MBI with gold. This was confirmed by the very good agreement between the calculated spectrum and the experimental spectra of different gold-MBI compounds, indicating that the vibrational properties of adsorbed MBI are chiefly determined by the coordination through the sulfur atom.

Journal Article↗
PubMed2004

Photoluminescence resulting from semiconductor-metal solid solution observed in one-dimensional semiconductor nanostructures.

A narrow band photoluminescence (PL) emission peak resulting from CdS-Au solid solution was observed when growing one-dimensional nanostructures of CdS via the vapor-liquid-solid mechanism by using Au as the catalyst. This emission peak was located at 680 nm, a wavelength longer than the near band edge emission of CdS at 520 nm, and was shown not to be caused by the usual trap states of CdS which lead to a broad band emission. Here, the one-dimensional nanostructures of CdS were grown in a simple, low-temperature (360 degrees C) metal-organic chemical vapor deposition process with a single source precursor of CdS. Straight nanowires of diameter 50-70 nm and wormlike nanorods of diameter 100-200 nm were obtained. Both the upper and lower portions of the nanorods/nanowires possessed single crystallinity as judged from the corresponding high-resolution transmission electron microscopy images and selected area electron diffraction data. This work demonstrates the feasibility of adjusting PL emission peaks of optoelectronic semiconductors through alloying with metals.

Cadmium Compounds↗
PubMed2004

Aggregation of photolytic gold nanoparticles at the surface of chitosan films.

Formation and aggregation of photolytic gold nanoparticles at the surface of chitosan (CTO) films have been investigated. When thin films of chloroauric acid salt of CTO were irradiated with UV light in wet air at room temperature for 10 min, gold nanoparticles of approximately 10 nm size are formed at the film surface. Detailed X-ray photoelectron spectroscopy (XPS) study and field emission type scanning electron microscopy (FE-SEM) observation have been carried out to characterize gold nanoparticles at the film surface. The shift of Au(4f) peak to the higher energy side and broadening of full width at half-maximum in the XPS spectrum are the direct evidence of the existence of gold atoms and small clusters in the early stage of photolysis. According to FE-SEM observation, growth in the particle diameter and aggregation of nanoparticles were observed after prolonged irradiation, and, finally, the film surface was densely covered with gold particles of 20-100-nm size. Gold atoms and clusters could move in the film and precipitate to the irradiated surface. Chemical composition analysis further suggests that gold particles at the surface are covered with an ultrathin CTO layer, which is partly oxidized by oxygen and chlorinated by chlorine during photochemical reactions.

Air↗
PubMed2004

Synthesis of aqueous Au core-Ag shell nanoparticles using tyrosine as a pH-dependent reducing agent and assembling phase-transferred silver nanoparticles at the air-water interface.

We demonstrate that the amino acid tyrosine is an excellent reducing agent under alkaline conditions and may be used to reduce Ag+ ions to synthesize stable silver nanoparticles in water. The tyrosine-reduced silver nanoparticles may be separated out as a powder that is readily redispersible in water. The silver ion reduction at high pH occurs due to ionization of the phenolic group in tyrosine that is then capable of reducing Ag+ ions and is in turn converted to a semi-quinone structure. These silver nanoparticles can easily be transferred to chloroform containing the cationic surfactant octadecylamine by an electrostatic complexation process. The now hydrophobic silver nanoparticles may be spread on the surface of water and assembled into highly ordered, linear superstructures that could be transferred as multilayers onto suitable supports by the versatile Langmuir-Blodgett technique. Further, tyrosine molecules bound to the surface of Au nanoparticles through amine groups in the amino acid may be used to selectively reduce silver ions at high pH on the surface of the Au nanoparticles, thus leading to a simple strategy for realizing phase-pure Au core-Ag shell nanostructures.

Air↗
PubMed2004

Formation process of two-dimensional networked gold nanowires by citrate reduction of AuCl4- and the shape stabilization.

Gold nanowires with a two-dimensional (2-D) network structure were formed by citrate reduction of AuCl4- with a low concentration of citrate. The structure change during the growth processes was observed by transmission electron microscopy (TEM) and the variation in concentrations of gold species in the aqueous solution was monitored by UV-vis spectra and Inductively Coupled Argon Plasma Emission Spectrophotometer (ICAP). The formation of 2-D gold nanowires was induced by the small amount of reducing agent because the preliminary gold nanoparticles formed by reduction of AuCl4- were thermodynamically unstable in the aqueous solution due to the insufficient capping of citrate. One of the key points of nanowire formation is the preferential adsorption of AuCl4- instead of citrate ions on the surface of the preliminary gold particles, which results in an attracting force between gold nanoparticles. We propose a hit-to-stick-to-fusion model, in which gold nanoparticles adhere by the attraction force and stick together, causing selective deposition of reduced gold metallic species on the concave surface of the two sticking particles, followed by fusion into nanowires. Nanowires then connect with each other, forming a network structure. The evidence obtained from TEM observation of transformation from gold nanowires on a TEM grid to large nanoparticles by hydrogen gas reduction and time-resolved measurements of gold ions suggest that gold ions not only are crucial for the growth of gold nanowires but also play an important role in stabilizing the shape of gold nanowires during the formation process. This method for synthesizing 2-D gold nanowires is simple and relatively easy application to the synthesis of other metallic nanowires such as silver or platinum is expected.

Adsorption↗
PubMed2004

Attachment of ferrocene nanotubes on beta-cyclodextrin self-assembled monolayers with molecular recognitions.

Ferrocene nanotubes were fabricated by binding carboxylic acid-derivatized ferrocenes onto template peptide nanotubes via hydrogen bonding. When these ferrocene-functionalized nanotubes were incubated with beta-cyclodextrin (beta-CD) self-assembled monolayers (SAMs) coated on patterned Au substrates in solution, the ferrocene nanotubes recognized and attached onto the beta-CD SAMs via host-guest molecular recognition. The ferrocene nanotubes were also observed to recognize the certain cavity size of CD. The attachment/detachment of nanotubes on the beta-CD SAMs was controlled electrochemically by tuning the redox states of ferrocene nanotubes. This electric field-responsive building block may be applied to build nanometer-sized switching components in electronics and sensors.

Carbohydrate Sequence↗
PubMed2004

Reversible encapsulation of nanometer-size polyaniline and polyaniline-Au-nanoparticle composite in starch.

In this paper we report a new method of solubilization of polyaniline and polyaniline-Au-nanoparticle composite by encapsulating nanometer-size particles in starch. The solubilization was carried out in the presence of ultrasonic waves. We also report that the encapsulation was completely reversible and the dissolved polyaniline as well as the composite could be recovered by replacement with molecular iodine. In addition, the polymer particles could also replace molecular iodine from starch-iodine complex. UV-Visible and Fourier transform infrared (FTIR) spectroscopic measurements established the reversible nature of encapsulation. Transmission electron microscopic measurements showed that the sizes of the particles encapsulated in starch were on the order of 10-20 nm for both polyaniline and Au-nanoparticle-polyaniline composite particles. X-ray diffraction evidenced the presence ofAu-nanoparticles in the starch-polyaniline-Au-nanoparticle composite. Finally, we also mention here that the dissolved polyaniline could also be recovered as a precipitate by enzyme (diastage) hydrolysis of the polyaniline encapsulating starch.

Aniline Compounds↗
PubMed2005

Gold nanoparticle formation during bromoaurate reduction by amino acids.

The synthesis and characterization of water-soluble dispersions of gold nanoparticles by the reduction of a potassium tetrabromoaurate precursor solution using the amino acids L-tyrosine, glycyl-L-tyrosine, and L-arginine using alkaline synthesis conditions are reported. The particle sizes determined by small-angle X-ray scattering (SAXS) and high-resolution transmission electron microscopy (HRTEM) measurements are found to be inversely proportional to the rate of particle formation, which was determined by time-resolved UV-visible spectrophotometry measurements, and vary very slowly at intermediate gold concentrations and rapidly at the extremes. Dispersions produced with a mixture of the two amino acids glycyl-L-tyrosine and L-tyrosine showed particle sizes and particle size distributions which were directly proportional to the ratio of the two L-amino acids, thus offering the possibility for control over the properties of the gold nanoparticle dispersions.

Amino Acids↗