Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “GLASSES”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34Linked to original sources
PubMed1987

A single fatal penetrating chest wound caused by a dagger-shaped fragment of broken door glass.

A 19-year-old woman ran against a glass door, and, breaking it, was struck in the left anterior chest by a single dagger-like fragment of broken door glass. This fragment deeply penetrated her chest and wounded the anterior wall of the left ventricle of her heart. She rapidly died from loss of blood. The majority of single fatal penetrating chest wounds seen at postmortem examinations are caused by firearms and bladed weapons. While penetrating chest wounds occasionally result from fragments of glass, most severe and fatal wounds from glass result from one's falling into or through plate glass and sustaining wounds of the head, face, abdomen, or extremities. A single fatal wound from a dagger-shaped piece of glass is distinctly uncommon. To prevent such an accident from occurring, safety glass must be used in front doors of public institutions.

Adult↗
PubMed1992

The use of glass ionomer as a root canal sealer--a pilot study.

The use of a resin-based glass ionomer as an endodontic sealer was studied in vitro. The root canals of extracted single-rooted human teeth with mature apices were prepared using a stepback technique. Subsequently, the smear layer was removed with 40% citric acid and the canals obturated using lateral condensation of cold gutta-percha and a resin-based glass ionomer as the sealer. The relationship between the sealer and the wall of the root canal was studied using scanning electron microscopy. The shear bond strength of gutta-percha to this glass ionomer was also determined. Finally, the uptake of fluoride into the wall of the root canal was studied using scanning electron microprobe analysis after storage for 2 weeks, 1 month and 3 months following root filling with gutta-percha and glass ionomer cement. The results showed that removal of the smear layer allowed the sealer to enter some of the dentinal tubules. This was observed most frequently in the middle third of the root canal, where there was good adaptation of the sealer. The shear bond strength of gutta-percha to the glass ionomer sealer was not significantly different from that obtained between gutta-percha and a proprietary zinc oxide-eugenol endodontic sealer. The concentration of fluoride in the dentine in the coronal part of the root canal increased after obturation with gutta-percha and the glass ionomer sealer at every time interval. The increase in fluoride concentration varied widely between teeth. It is concluded that a resin-based glass ionomer cement may have potential as a root canal sealer.

Dental Bonding↗
PubMed1989

A comparative study of the bond strengths of amalgam and alloy-glass ionomer cores.

The purpose of this study was to compare the bond strengths of dental amalgam cores and dental alloy-glass ionomer cores that were luted to cast gold crowns with glass ionomer cement. Seventy-two human extracted molars were sectioned horizontally and four regular thread mate system pins were inserted into a flat pulpal floor. The teeth were restored with amalgam or alloy-glass ionomer admixture and prepared for crown preparations. Castings were produced with type III gold and cemented to the cores with Fuji type I glass ionomer cement. Thirty-six of the specimens were subjected to thermal fatigue by cycling between 4 and 50 degrees C for periods of 1, 5 and 10 weeks. The remainder of the specimens were retained in deionized water at 37 degrees C. Bond strengths of the cores, in tension, were measured with a universal testing machine. The alloy-glass ionomer cores exhibited higher bond strengths than the amalgam cores for virtually all time periods, particularly the thermocycled samples. The alloy-glass ionomer cores exclusively displayed core fractures and pin/tooth insufficiencies while the amalgam cores failed because of a deterioration of the glass ionomer luting cement.

Crowns↗
PubMed1971

Cultivation of Mycoplasmas on glass.

Eight Mycoplasma species of human origin were successfully cultivated on glass. Complement-fixing (CF) antigens prepared from glass-adherent mycoplasmas were potent, specific, and free from anticomplementary activity. PPLO broth medium supplemented with 1 to 5% PPLO serum fraction (bovine), 2.5% fresh yeast extract, and 1% glucose (glycolytic species) or 1% arginine (arginine-utilizing species) supported moderate to luxuriant growth of mycoplasmas on glass. The potency of CF antigens prepared from glass-adherent mycoplasmas varied with the species of Mycoplasma tested and the duration of incubation. When the potency of CF antigens prepared from glass-adherent mycoplasmas was compared with that material sedimented from the broth phase of the same culture, three patterns of growth were observed: M. hominis and M. orale type 2 grew preferentially in the broth phase; M. salivarium, M. orale types 1 and 3, M. pneumoniae, and M. lipophilum preferentially adhered to the glass; and M. fermentans was biphasic. The growth of mycoplasmas on glass provides a simple means of concentrating and purifying such organisms for immunological and biochemical studies.

Acetates↗
PubMed1981

Lacerations from glass in childhood.

A study of 62 glass injuries to children serious enough to warrant admission to hospital showed that 30 were due to architectural glass in doors or windows and 26 of these occurred in houses. Glass bottles caused 12 injuries. Architectural glass produced more serious injuries affecting major arteries, nerves and tendons, and internal viscera. In view of the frequency and severity of architectural glass injuries in houses, safety glass in recommended for all glass doors, French windows, patio doors, and the lower parts of windows.

Accident Prevention↗
PubMed2000

Comparing cardiac action potentials recorded with metal and glass microelectrodes.

Machine-pulled high-impedance glass capillary microelectrode is standard for transmembrane potential (TMP) recordings. However, it is fragile and difficult to impale, especially in beating myocardial tissues. We hypothesize that a high-impedance pure iridium metal electrode can be used as an alternative to the glass microelectrode for TMP recording. The TMPs were simultaneously recorded from isolated perfused swine right ventricles with a metal microelectrode and a standard glass microelectrode during pacing and during ventricular fibrillation. The basic morphology of TMP recorded with these electrodes was comparable. The action potential duration (APD) at 90% repolarization was 241 +/- 29 ms for the metal microelectrode and 236 +/- 31 ms for the glass microelectrode with a good correlation (r = 0.99, P < 0.0001). The maximum slope value of the APD restitution curves during pacing was also significantly correlated. One metal microelectrode and >20 glass microelectrodes were needed per study. We conclude that, in isolated perfused swine right ventricles, the TMP recorded by the metal microelectrode is comparable with that recorded by the glass microelectrode. Because the metal microelectrode is more durable than the glass microelectrode, it can serve as an alternative for APD recording and for restitution analyses.

Action Potentials↗
PubMed1999

Efficiency of leukocyte removal by filters made of superfine glass fiber membranes.

BACKGROUND AND OBJECTIVES: To demonstrate the application of leukocyte removal filters made of a new type of filter material - superfine glass fiber - for depleting leukocytes in SAGM red cell suspensions and preventing nonhemolytic transfusion reactions. MATERIALS AND METHODS: The extent of leukocyte depletion and red cell recovery was based on cell counts. Trace leukocytes were counted in a 50-microl Nageotte counting chamber or by using a flow cytometer. The chemical stability of the glass fiber membranes was studied by plasma emission spectrometer and by measuring the ion content and weighing nonvolatile matter in water extract. The structural stability of the glass fiber membranes was studied by a micropore-filter membrane method. RESULTS: Leukocyte removal filters made of superfine glass fiber membranes removed more than 99.0% of leukocytes in SAGM red cell suspensions prepared from 400 ml whole blood. Red cell recovery exceeded 90%, and the total number of residual leukocytes was less than 5x10(6). A water extract of the glass fiber membranes contained only traces of Si4+ and Ca2+ and less than 2 mg/100 ml of nonvolatile matter. No broken or loose fibers were found in the filters. Scanning electron microscopy showed that the web structure of the glass fiber membranes was instrumental in trapping and holding leukocytes. CONCLUSION: A filter made of glass fiber membranes is effective in leukocyte depletion.

Adenine↗
PubMedDate not supplied

Six-year success rates of occlusal amalgam and glass-ionomer restorations placed using three minimal intervention approaches.

The present randomised clinical trial was aimed at comparing three minimally invasive restorative treatment approaches for managing dental caries in occlusal surfaces using a non-gamma-2 amalgam and a low-viscosity glass-ionomer as the restorative material. The treatment approaches tested in parallel groups were: conventional in a university setting, modified-conventional and ultraconservative (Atraumatic Restorative Treatment, ART) approaches in a field setting. A split-mouth design was used in which the two restorative materials were randomly placed in 430 matched contralateral pairs of permanent molar teeth. A total of 152 children from five primary schools were recruited and treated by a dental therapist. The restorations were evaluated after 6 years by 2 calibrated independent examiners. The 6-year successes for all occlusal amalgam and glass-ionomer restorations were 72.6 and 72.3%, respectively. There were no statistically significant differences observed between the successes for both amalgam and glass-ionomer restorations placed either by the ART (68.6%, with 95% CI = 61-76%) approach or by the conventional (74.5%, with 95% CI = 65-82%) and the modified-conventional (75.8%, with 95% CI = 67-83%) approaches after 6 years. There was also no statistically significant difference observed between the successes of occlusal ART restorations with glass-ionomer (67.1%, with 95% CI = 56-77%) and occlusal conventional restorations with amalgam (74%, with 95% CI = 61-85%) after 6 years. 'Restoration fracture/marginal defects' and 'loss of material' were the most common causes for failure. The former was more often recorded in amalgam restorations and the latter in glass-ionomer restorations. Secondary caries was observed for 2% of glass-ionomer and for 10% of amalgam restorations. This difference was statistically significant (p = 0.001). The ART approach using glass-ionomer performed equally well as conventional restorative approaches using electrically driven equipment and amalgam for treating dentinal lesions in occlusal surfaces after 6 years.

Aminobutyrates↗
PubMed1992

Effect of different glass ionomers on the acid production and electrolyte metabolism of Streptococcus mutans Ingbritt.

In order to study the effects of different glass ionomers on the metabolism of Streptococcus mutans, test slabs of freshly mixed conventional glass ionomer (Fuji), silver glass ionomer (Ketac-Silver), composite (Silux), and 2-week-old Fuji were fitted into the bottom of a test tube. A plaque-like layer of S. mutans strain Ingbritt was centrifuged onto the test slabs, and the samples were incubated for 20 h in 1.7% (w/v) sucrose solution. For freshly mixed Fuji and Ketac-Silver, the pH fall was significantly smaller than for old Fuji and composite. These materials also released the largest amount of fluoride into the fluid phase. Incubation with glass ionomer materials led to an increase in the cellular concentration of fluoride in bacteria, but intracellular fluoride did not correlate with the fall in pH. The lowest pH was associated with the lowest cellular magnesium content. Ketac-Silver released large amounts of calcium in the fluid phase, and the cellular calcium content was doubled in this group. The results show that freshly mixed glass ionomers affect acid production and electrolyte metabolism of S. mutans in vitro. The effect of conventional glass ionomer, however, seems to disappear after a few weeks. The effects of calcium and silver released by cermet glass ionomer deserve further study.

Acids↗
PubMed2005

Fixation of distal femoral osteotomies with self-reinforced poly(L/DL)lactide 70:30 and self-reinforced poly(L/DL)lactide 70: 30/bioactive glass composite rods. an experimental study on rabbits.

Two self-reinforced poly(L/DL)lactide 70:30 or self-reinforced poly (L/DL)lactide 70:30/ bioactive glass (SR-P(L/DL)LA/bioactive glass) composite rods (2 mm x 40 mm) were implanted into the dorsal subcutaneous tissue and osteotomies of the distal femur were fixed with these rods (2 mm x 26 mm) in 36 rabbits. The follow-up times varied from 3 to 100 weeks. After the animals were killed, three-point bending and shear tests and molecular weight measurements were performed for subcutaneously placed rods. Radiological, histological, histomorphometrical, microradiographic and oxytetracycline-fluorescence studies of the osteotomized and intact control femora were performed. After 12 weeks the SR-P(L/DL)LA rods had fragmented into pieces and the mechanical properties could not be measured. The SR-P(L/DL)LA/bioactive glass rods lost their mechanical properties slower, and at 24 weeks the bending strength had decreased by 39% and the shear strength by 50%. After that the mechanical properties of the SR-P(L/DL)LA/bioactive glass rods could not be measured. All osteotomies healed well, and no gross signs of inflammatory reactions were observed. One slight displacement was seen in the three-week follow-up group with SR-P(L/DL)LA rods. Signs of resorption of the implants were seen after 48 weeks in the SR-P(L/DL)LA group and after 24 weeks in the SR-P(L/DL)LA/bioactive glass group. The SR-P(L/DL)LA/bioactive glass rods were almost totally resorbed from the bone at 100 weeks. The present investigation showed that the mechanical strength and fixation properties of the SR-P(L/DL)LA and the SR-P(L/DL)LA/bioactive glass composite rods are suitable for fixation of cancellous bone osteotomies in rabbits.

Animals↗
PubMed1997

Comparative physico-mechanical characterization of new hybrid restorative materials with conventional glass-ionomer and resin composite restorative materials.

The recently developed hybrid restorative materials contain the essential components of conventional glass ionomers and light-cured resins. The objective of this study was to determine several physical and mechanical properties of eight such materials in comparison with two conventional glass ionomers, one micro-filled, and one ultrafine compact-filled resin composite. The two resin composites and two of the three polyacid-modified resin composites could be polished to a higher gloss than the conventional as well as the resin-modified glass ionomers. After abrasion, surface roughness increased for all materials, but not at the same extent, being the least for the conventional resin composites and one polyacid-modified resin composite, Dyract. In contrast to the later resin composites, of which the surface roughness is principally determined by the presence of protruding filler particles above the resin matrix, roughness of conventional and resin-modified glass ionomers results from both protruding filler particles and intruding porosities. The mean particle size of the hybrid restorative materials fell between the smaller mean particle size of the resin composites and the larger one of the conventional glass ionomers. The micro-hardness and Young's modulus values varied substantially among all eight hybrid restorative materials. For all the resin-modified glass-ionomer restorative materials, the Young's modulus reached a maximum value one month after mixing and remained relatively stable thereafter. The Young's modulus of the conventional and the polyacid-modified resin composites decreased slightly after one month. The conventional glass-ionomer materials undoubtedly set the slowest, since their Young's modulus took six months to reach its maximum. The flexural fatigue limit of the hybrid restorative materials is comparable with that of the micro-filled composite. From this investigation, it can be concluded that the physico-mechanical properties vary widely among the eight hybrid restorative materials, indicating that these materials probably have yet to achieve their optimum properties. Their mechanical strength is inadequate for use in stress-bearing areas, and their appearance keeps them from use where esthetics is a primary concern.

Acrylic Resins↗
PubMed1997

Longevity and cariostatic effects of everyday conventional glass-ionomer and amalgam restorations in primary teeth: three-year results.

The aim of this study was to compare the longevity and cariostatic effects of everyday conventional glass-ionomer and amalgam restorations in primary teeth. The materials consisted of 515 Ketac-Fil glass-ionomer restorations and 543 Dispersalloy amalgam restorations prepared in 666 children, from 3 to 13 years of age, by 14 dentists within the Danish Public Dental Health Service in the municipalities of Vaerløse and Hillerød. The restorations, of which 79% were of the Class II type, were in contact with 593 unrestored surfaces in adjacent primary and permanent teeth. After 3 years, 6% of the patients had dropped out of the study, and 33% of the teeth were exfoliated with the restoration in situ. A further 37% of the glass-ionomer and 18% of th amalgam restorations were recorded as failed (p < 0.001). The frequency of failures was highest for Class II glass-ionomer restorations, which showed a 50% median survival time of only 34 1/2 months, because of many fractures, while the 75% survival time for Class II amalgam restorations just exceeded the actual 36 months (p < 0.001). Caries progression was most often recorded in surfaces adjacent to amalgam restorations, and 21% of these surfaces needed restorative treatment vs. 12% of the surfaces adjacent to glass-ionomer restorations (p < 0.001). The three-year results indicated that conventional glass ionomer is not an appropriate alternative to amalgam for all types of restorations in primary teeth. In particular, the short longevity of Class II glass-ionomer restorations could not be compensated for by the reduced caries progression and need for restorative therapy of adjacent surfaces.

Adolescent↗
PubMedDate not supplied

Materials for restoration of primary teeth: 2. Glass ionomer derivatives and compomers.

A wide variety of materials have been used for the restoration of primary teeth. Resin-modified glass ionomers and the more recently introduced viscous glass ionomers have been developed from conventional glass ionomer materials in an attempt to overcome the suboptimal properties of conventional glass ionomers. These materials would appear to have the necessary physical characteristics for restorations in load-bearing situations in primary teeth, as have the resin-based compomer materials, which now have well documented success rates in a number of studies. The first of these two articles described 'traditional' restorative materials, including amalgam and conventional glass ionomer, for the restoration of primary teeth. This paper describes materials derived from traditional glass ionomers in an attempt to overcome the suboptimal properties of conventional glass ionomers and resin-based materials such as compomer.

Child, Preschool↗
PubMed2004

[Comparative surface examinations of morse taper junctions of the MRP-Titan stem shot peened with glass beads].

INTRODUCTION: Shot peening is widely used for surface treatment of hip implants. Shot peening with steel balls followed by a cleaning process with glass beads is used for introduction of negative stress in the production of morse taper junctions of the MRP-Titan stem. An increasing number of publications in maxillofacial surgery and orthopaedic surgery show that there is a significant contamination of Alumina or glass blasted surfaces. Latest research suggested an association between contaminant particles with early loosening of endoprostheses (third body wear). The aim of this study is to evaluate the amount and the effects of surface contamination with glass particles on morse taper junctions of implants and explants of the MRP-Titan stem. MATERIAL AND METHOD: The surface of morse taper junctions of the MRP-Titan stem (5 original-package implants and explants each) are analysed for glass particle contamination. A field emission scanning electron microscopy (LEO 1525) is used for the detection of the glass-particles on the implant surface with a backscattered electron detector. The relative surface area covered by particles was calculated by means of an image analyzing software (analySIS, Soft Imaging System GmbH). RESULTS: The surface of the implants showed a considerable contamination with glass particles with a mean of 6.67 +/- 0.82% compared to 2.06 +/- 0.74% on the surface of the explants. The difference was statistically significant (p<0.0001). DISCUSSION: The results of this study show that there is a relative high percentage of contamination with glass particles on shot peened morse taper junctions of the MRP-Titan stem. This contamination is significantly lower on the surface of the explants. With respect to third body wear and osteolysis in total hip arthroplasty further studies are necessary to minimize contamination while maintaining adequate surface quality.

Equipment Contamination↗
PubMed1988

Evaluating glass, polystyrene, and polypropylene containers for semen collection and sperm washing.

The effects of glass, polystyrene, and polypropylene containers on semen parameters as measured by Cell Soft computer-assisted semen analysis and hypoosmotic swelling (HOS) tests were assessed in unwashed specimens and again after sperm washing and swim-up procedures. A superiority in unwashed specimens was observed in glass versus polystyrene concerning velocity, motility percentage, and HOS testing (p less than 0.01). Also, superiority of glass versus polystyrene was demonstrated for linearity and ALH (p less than 0.05). Glass was only superior to polypropylene in categories of motility and HOS testing (p less than 0.05 and p less than 0.01, respectively). There was no category in which plastic was statistically superior to glass in the unwashed specimens. Concerning washed and swim-up specimens, there were no semen parameters in which there was any superiority demonstrated of either glass or plastic. Unless some future proof that the differences in semen parameters demonstrated in this study have no clinical significance, these data suggest that the collection of semen samples for sperm analysis or therapeutic use should be performed in glass containers.

Glass↗
PubMed2002

Mechanical properties of reinforced denture base resin: the effect of position and the number of woven glass fibers.

This study examined the effects of the position and the number of woven glass fibers on the flexural strength, flexural modulus, and toughness of reinforced denture base resin. The woven glass fiber consisted of 1-4 laminated sheets. Chemical curing was used to polymerize three types of 4-mm-thick test specimens: fibers in compresrion, fibers in the center, and fibers in tension. Unreinforced specimens were produced as controls. A three-point flexural test was performed and the woven glass fiber content was calculated after the woven glass fiber was fired. The best results were obtained when the woven glass fiber was incorporated outside the base resin under tension, thereby increasing the flexural strength and flexural modulus. Furthermore, the denture base resin reinforced with woven glass fiber was made tougher by increasing the number of woven glass fibers incorporated into the portion under tension.

Analysis of Variance↗
PubMed1983

Characteristics of chloroquine binding to glass and plastic.

Chloroquine, a 4-aminoquinoline derivative that can be radically curative in the therapy of malaria due to Plasmodium falciparum, binds to glass to an extent which can seriously decrease the availability of the drug. Preparations of chloroquine in various solutions showed decreases in concentration of up to 40% in glass containers. Passage of solutions of chloroquine over columns of glass beads or glass wool decreased chloroquine concentrations by up to 70%. Chloroquine was found to bind extensively to cellulose acetate filters, but showed little binding to polycarbonate filters or to plastics of various types, including polycarbonate, polypropylene, and polystyrene. Human serum at concentrations from 5-50% inhibited the binding of chloroquine to glass. Equilibrium dialysis experiments indicated that human serum possesses a large number of binding sites for the drug; it is also possible that factors in the serum compete for drug-binding sites on glass. It is imperative for laboratory workers, especially those in the field, to recognize the significant reductions in chloroquine concentration which occur when the drug is prepared or stored in glass containers. Such reductions can alter the interpretation of chloroquine sensitivity studies and may lead to inaccurate reports of chloroquine resistance.

Blood↗
PubMed2004

[Patient dose measurement with fluorescent glass dosimeter: characteristics evaluation and patient skin dose measurement in abdominal interventional radiology].

In this study, we investigated the usefulness of the fluorescent glass dosimeter for measuring patient dose. The fluorescent glass dosimeter is constructed of a glass element and its holder. One type has a tin (Sn) filter and the other does not. The characteristics of these two types of fluorescent glass dosimeters were studied in the range of diagnostic X-ray energy. The result was excellent for each characteristic. Directional dependency, however, was recognized in the fluorescent glass dosimeter with tin (Sn) filter. Based on these evaluations, patient skin dose was measured for abdominal interventional radiology and diagnostic digital subtraction angiography using the holder without filter, which is less direction-dependent and eliminates obstructive shadows in radiography and fluoroscopy. The average skin dose of 30 patients for abdominal IVR was 1.17+/-0.44 Gy (0.51-1.94 Gy), while those for diagnostic DSA examination was 0.54+/-0.21 Gy (0.15-1.02 Gy). The fluorescent glass dosimeter provides high capability for skin dose measurement. The fluorescent glass dosimeter is also useful for controlling patient dose during IVR procedures.

Fluorescence↗