Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Flocculation Tests”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34Linked to original sources
PubMed2005

Treatment of textile wastewater using a natural flocculant.

The physicochemical treatment of wastewater is of substantial interest, especially when conventional treatments by biological processes are not amenable. Among the current chemical processes used for industrial wastewater treatment, coagulation-flocculation has received a large attention for high pollutant removal efficiency. This paper summarizes the results of a textile wastewater treatment process aimed at the destruction of colour by coagulation-flocculation process and using an organic natural flocculant: tannic substances. Jar-test experiments were carried out in order to determine the optimum conditions for the removal of organic matter and color. Treatment with studied flocculent (Polysep3000) proved to be effective in a wide pH range (pH < or = 10), very effective in removing the color (96 %) and a fraction of the COD (40-50 %) from the textile wastewater. Polysep3000 is compared to Al2 (SO4)3 and FeCl3 for sludge production. Polysep3000 seems to be suitable for yielding a high removal of color (> 90%) and corresponding low volume of settled sludge.

Flocculation↗
PubMed2004

[Wastewater treatment efficiency of combined aluminum-starch flocculant].

This paper examined the efficiency of a combined flocculants synthesized by aluminum and starch (noted as CAS) in treating kaolin suspension, domestic wastewater, municipal effluent and pulp-making wastewater. Jar test results showed that the flocculent performance of CAS was prior to polyaluminum-chloride (PAC) in treating different concentration kaolin suspension samples (100, 400 and 2000 mg x L(-1)). The optimal dose of CAS to each sample was 3.0, 2.0 and 2.0 mg x L(-1), being 60%, 50% and 50% of PAC, respectively. CAS also showed a priority to PAC in removing the COD and turbidity of domestic and municipal effluents. When treating pulp-making wastewater, the optimal dose of CAS was 70% of PAC. The removal rate of COD was enhanced 10%, the sludge was reduced 40%, and the sediment time was greatly shortened. It was also identified that the optimal concentration required to affect flocculation depended on the concentration and the character of the wastewater within the range examined. CAS was more effective in treating high turbidity wastewater.

Aluminum↗
PubMed2004

Performance of basaltic dust issued from an asphaltic plant as a flocculant additive for wastewater treatment.

The feasibility of using basaltic dust as a flocculant additive or coagulant aid for wastewater treatment was assessed in this research. The experimental study was divided into two stages: 1) physicochemical characterisation of the basaltic dust by applying standardised techniques, and 2) evaluation of this material as flocculant additive for the coagulation-flocculation of wastewater treated for reuse. Coagulation-flocculation experiments were carried out in the laboratory with a mixture of industrial and municipal wastewater samples collected from two points of the final discharge of the Mexico City sewerage system. Aluminium sulphate and lime were used as coagulants and the basaltic dust as flocculant additive, by applying the jar-test technique. The results of the corrosivity, reactivity, explosiveness, toxicity, inflammability and biological risk tests indicated that this material is classified as a non-hazardous waste (according to the Mexican legislation, NOM-052-ECOL-1993). The density, oxide content and particle size values of basaltic dust were similar to those reported for the flocculant additive denominated activated silica. The jar test results showed a positive effect of basaltic dust over the effluent and sludge qualities, to the extent that coagulant doses can be reduced 30% (from 150 mg/L to 110 mg/L of Al2(SO4)3).

Construction Materials↗
PubMed2002

Pre-selection of flocculants by the LUMiFuge separation analyser 114.

This paper reports on lab-scale investigations in relation to pre-selection of flocculants for sludge dewatering with decanter centrifuges. Results obtained were compared with CST-measurements and discussed in relation to findings under field conditions. Experiments were carried out with sewage sludges of different origin and characteristics and a number of commercial flocculants. Kinetics of sedimentation and clarification were measured as well as the compression behaviour and shear sensitivity of sludge sediments. To measure flocculant performance stability against intensive shearing, total solids in the sludge cake obtained and dewaterability of the sludge cake during the first 20-50 s of centrifugation were compared. A screening test procedure was developed. Efficient flocculants should produce high residual total solids and good initial compressibility. Lab-scale investigations deliver more reliable results if the dynamic behaviour of the sludge under centrifugal acceleration is also investigated. The separation analyser LUMiFuge 114 can provide results about the compression behaviour of sludges in the range between 10 and 100 s. So far no other method or device is known which can deliver such results.

Centrifugation↗
PubMed2003

Seasonal change in the number of Cryptosporidium parvum oocysts in water samples from the rivers in Hokkaido, Japan, detected by the ferric sulfate flocculation method.

An epidemiological study was carried out in natural water supplies of Hokkaido, one of the largest dairy prefectures in Japan. To investigate the prevalence of Cryptosporidium parvum (C. parvum) oocysts water samples were collected from three rivers in the eastern area of Hokkaido from August 1999 to October 2001, and C. parvum oocysts were collected and purified by the ferric sulfate flocculation method. The oocysts were detected using the immunofluorescent assay test (IFAT) and 4', 6-diamidino-2-phenylindole (DAPI) staining. The seasonal change in the number of oocysts detected was observed. Oocysts increased in numbers from the late summer to the early autumn (from August to November), thereafter, they exhibited a trend to decrease until December, when no oocysts could be detected. The maximum number of oocysts detected in the three rivers was 3.50, 5.00 and 3.33 oocysts/l, respectively. The oocyst density in river water changed in relation to the season in 1999, 2000 and 2001. This report first cleared up the seasonal changes in C. parvum oocysts number in river water.

Animals↗
PubMed1991

Flocculation of venereal disease research laboratory reagent by Helicobacter pylori.

Helicobacter pylori strains flocculated with Venereal Disease Research Laboratory (VDRL) reagent in a glass slide test. Other pathogenic bacterial and fungal strains were nonreactive. The specific VDRL reaction property of Helicobacter pylori indicates an affinity of the cells for lipoidal substances, and can be used as a diagnostic aid for species identification.

Bacteria↗
PubMed1956

Clinical trial of the Penn test for cancer.

An independent clinical trial of the Penn seroflocculation test for cancer was carried out in order to learn whether this test might be clinically useful either in differential diagnosis or as a screening test for the detection of cancer. In addition, studies were made of the flocculation titer of sera giving positive Penn tests. Incidental observations were made concerning the reproducibility of the test. The trial provided no evidence that the test might be useful in cancer detection. The test should be improved technologically before further clinical evaluations are undertaken. Further study of the basic mechanisms that bring about the positive Penn reaction appears desirable.

Humans↗
PubMed2006

The effect of polymeric flocculants on floc strength and filter performance.

Polymeric flocculants are widely used throughout the water industry as flocculant aids, they are known to increase floc density and aid settlement in the clarification stage of the water treatment process. In this research, polymeric flocculants were used to improve floc strength prior to filtration on a dissolved air flotation (DAF) plant in an attempt to prevent filter breakthrough. A modified jar test procedure using a PDA (photometric dispersion analyser) optical flocculation monitor was developed in order to evaluate the system floc strength. Filtration trials were carried out on a pilot filter rig situated on a surface water treatment works in Yorkshire. The filter feed originated from the main plant filter channel. Filter performance was assessed by continuous online monitoring of effluent particle counts, turbidity and headloss over the period of the filter run. Results indicated that low doses of polymeric flocculants had a beneficial effect on filtered water quality, as measured by particle counts, turbidity, UV254 absorption and dissolved organic carbon (DOC). Polymeric flocculants also had the effect of extending filter run length. The modified jar test results indicated that the flocculants used improved the floc strength and enhanced reflocculation of the micro flocs present after the flotation process.

Filtration↗
PubMed1992

Yeast flocculation: reconciliation of physiological and genetic viewpoints.

Yeast flocculation results from surface expression of specific proteins (lectins). Two flocculation phenotypes were suggested by physiological and biochemical tests, whereas genetic data suggested a larger number of mechanisms of flocculation. After reviewing the biochemistry, physiology and genetics of flocculation, a new hypothesis combining the data available from these different sources, is proposed. Flocculation results when lectins present on flocculent cell walls bind to sugar residues of neighbouring cell walls. These sugar receptors are intrinsic to the mannan comprising cell walls of Saccharomyces cerevisiae. Two lectin phenotypes were revealed by sugar inhibition studies. The gluco- and mannospecific NewFlo phenotype is not, as yet, found in genetically defined strains. Mannospecific flocculation (Flo1 phenotype) is found in strains containing the genes FLO1, FLO5 and FLO8. This phenotype is also found following mutation of the TUP1 or CYC8 loci, in previously non-flocculent strains. It is therefore proposed that the structural gene for mannospecific flocculation is common or possibly ubiquitous in non-flocculent strains and in consequence, FLO1, FLO5 and FLO8 are probably regulatory genes, exerting positive control over the structural gene. Flocculation expression requires lectin secretion to the cell surface. Many of the observed 'suppressions' of flocculation may be due to mutations of the secretory process, involved in transporting structural proteins to the cell wall. The possible involvement of killer L double-stranded RNA with flocculation is suggested, given the lectin properties of viral coat proteins and an association between L double-stranded RNA and the Flo1 phenotype.

Cell Aggregation↗
PubMed2002

"Weak" ultrasonic pre-treatment on anaerobic digestion of flocculated activated biosolids.

This study examined how "weak" ultrasonic pre-treatment affects anaerobic digestion of waste biosolids, treated with a cationic polyelectrolyte flocculant. In relation to pre-treatment, the term "weak" used refers to the fact that the total ultrasonic energy input to biosolids is insufficient to fully disrupt its floc structure or the cell walls, as described in the literature. Methane production potential, floc characteristics (size, morphology and zeta-potential) and process parameters (chemical oxygen demands and oxidative-reductive potentials) were monitored, as the digestion was tested. The presence of polyelectrolyte flocculants enhanced methane production within 6 days of digestion (phase I), but inhibited the digestion thereafter (phase II). Following pre-treatment by sonication (0.33 W/mL, 20 min), the methane productions of both original and flocculated biosolids significantly increased. The underlying mechanisms of weak ultrasonic pre-treatment are discussed.

Bacteria, Anaerobic↗
PubMed1986

[The use of flocculation sludge in poultry feed. The effect of feeding flocculation sludge on the quality of broiler chickens].

Broiler chickens were fattened for six weeks with feeds, to which 0%, 7.5% or 15% of dried flocculated sludge had been added. Tests were performed on the slaughtered birds with regard to microbiological and sensory characteristics. In addition, the concentrations of various (heavy) metals in the meat of the breast and leg were determined. Specimens of the tissues of various organs were also subjected to histopathological examination. Except for a still unaccountable increase in juicyness of the flesh of the legs of the 7.5% group and a reduction of the zinc level in that of the breast and legs, any other effects attributable to the incorporation of dried flocculated poultry sludge in the diets were not detectable.

Animal Feed↗
PubMed1996

The flocculation of wine yeasts: biochemical and morphological characteristics in Kloeckera apiculata.

The floc-forming ability of flocculent strains of Kloeckera apiculata, isolated from musts, was tested for susceptibility to proteinase and sugar treatments. Three different flocculation phenotypes were discriminated by protease digestion, whereas the inhibition of flocculation by sugars distinguished two definite patterns: one mechanism of flocculation involved a galactose-specific protein and the other a broad-specificity lectin. SEM and TEM observation of the cell surface of two different Kloeckera strains revealed fine fibrils and a diffuse structure at the point of contact in one strain, and thick masses of mucus on the cell wall of the other strain.

Carbohydrates↗
PubMed2006

Agglomeration of struvite crystals.

Struvite crystallisation is widely studied as a way to remove phosphorus from wastewater effluents and simultaneously generates a valuable product for the fertiliser industry. However, to date, some crystallisation processes experimented at either pilot/or full scale face problems linked to the formation of fines. This paper presents results on the investigation of struvite agglomerative properties and the possible application of coagulants and/or flocculants to remove fines. Coagulants investigated were hydrolysing metals salts (Al(3+) and Fe(3+)), calcium compounds and a cationic polymer, polydiallyldimethylammoniumchloride (polyDADMAC). The effects of a natural flocculant (alginate) have also been tested. Results demonstrated that destabilisation of struvite particles by chemical addition was feasible and identified polyDADMAC as a good option for the agglomeration of struvite particles. However, optimisation of its dosage under typical pH conditions for struvite formation showed floc formation to be very pH sensitive.

Alginates↗
PubMed2002

Pilot testing of dissolved air flotation (DAF) in a highly effective coagulation-flocculation integrated (FRD) system.

Factors of pretreatment coagulation/flocculation units were studied using raw water of low temperature and low turbidity. Aluminum sulfate (AS) and selected polyaluminium chlorides (PACls) were all effective in the DAF process when used under favorable conditions of coagulant addition, coagulation, flocculation and flotation units. Compared with the AS coagulant, PACls, at lower dosage, could give the same effective performance even with shorter coagulation/flocculation time or lower recycle ratio during the treatment of cold water. This is attributed to the higher-charged polymeric Al species, and the lower hydrophilic and more compact flocculated flocs of PACl coagulant. Based on results of pilot experiments, the goal of FRD system can be achieved by combining a DAF heterocoagulation reactor with PACl coagulant (F), an efficient flocculation reactor (R), as well as an economical auto-dosing system (D).

Air↗
PubMed2004

Temperature effects on flocculation, using different coagulants.

Temperature is known to affect flocculation and filter performance. Jar tests have been conducted in the laboratory, using a photometric dispersion analyser (PDA) to assess the effects of temperature on floc formation, breakage and reformation. Alum, ferric sulphate and three polyaluminium chloride (PACI) coagulants have been investigated for temperatures ranging between 6 and 29 degrees C for a suspension of kaolin clay in London tap water. Results confirm that floc formation is slower at lower temperatures for all coagulants. A commercial PACl product, PAX XL 19, produces the largest flocs for all temperatures; and alum the smallest. Increasing the shear rate results in floc breakage in all cases and the flocs never reform to their original size. This effect is most notable for temperatures around 15 degrees C. Breakage, in terms of floc size reduction, is greater for higher temperatures, suggesting a weaker floc. Recovery after increased shear is greater at lower temperatures implying that floc break-up is more reversible for lower temperatures.

Alum Compounds↗
PubMed2002

Abatement of waste gases and water during the processes of semiconductor fabrication.

The purpose of this article is to examine the methods and equipment for abating waste gases and water produced during the manufacture of semiconductor materials and devices. Three separating methods and equipment are used to control three different groups of electronic wastes. The first group includes arsine and phosphine emitted during the processes of semiconductor materials manufacture. The abatement procedure for this group of pollutants consists of adding iodates, cupric and manganese salts to a multiple shower tower (MST) structure. The second group includes pollutants containing arsenic, phosphorus, HF, HCl, NO2, and SO3 emitted during the manufacture of semiconductor materials and devices. The abatement procedure involves mixing oxidants and bases in an oval column with a separator in the middle. The third group consists of the ions of As, P and heavy metals contained in the waste water. The abatement procedure includes adding CaCO3 and ferric salts in a flocculation-sedimentation compact device equipment. Test results showed that all waste gases and water after the abatement procedures presented in this article passed the discharge standards set by the State Environmental Protection Administration of China.

Air Pollutants↗