Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Films”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34Linked to original sources
PubMed2003

Study of molecular interaction in the mixed film of arachidic acid and metal beta-diketonate complexes by the "surface ions" method.

Molecular interaction is very important for the mechanical properties and application of Langmuir films. In general, fatty acid film is stabilized by certain "subphase ions." In this work, two metal beta-diketonate complexes (M(tmhd)n, tmhd=2,2,6,6-tetramethyl-3,5-heptanedionate) were used as "surface ions" to form stable condensed films with different ratios at the air/water interface. The pi-A isotherms of the mixed films had been measured. The smaller molecular area of the metal beta-diketonate complexes indicated that the metal beta-diketonate complexes form multilayer condensed structures at high pressure at the air/water interface. However, arachidic acid (AA) retained a monolayer structure at high pressure in the mixed system. No considerable phase separations appeared during the compression of the mixed films, which indicated that the mixed films of metal beta-diketonate complexes and AA were miscible and stable. The molecular interaction of the two components in the mixed films was investigated in detail. Mixed systems with the mixing ratio of M(tmhd)n:AA=1:2 were chosen to study the effects of the interaction on the mechanical properties of the mixed films. The molecular interaction between AA and Ce(tmhd)4 is proved to be more significant than that between AA and Sr(tmhd)2, and the pi-A isotherms of the mixed films differ a lot from that of pure AA monolayer. Due to the strong intermolecular interaction, the liquid region disappears in the Ce(tmhd)4/AA mixed films, and dynamic elasticity is improved especially at high surface pressure. On the other hand, the interaction between the AA and the Sr(tmhd)2 is much weaker and the effects of the interaction on the properties (pi-A isotherm and dynamic elasticity) of the mixed films are not so significant, especially at low surface pressure. These results are in accordant with that of the UV spectra analyses.

Journal Article↗
PubMed2003

On the adsorption and condensed film formation of dodecyl-, tetradecyl-, hexadecyl-, and octadecyltrimethylammonium bromides at the mercury/electrolyte interface.

The adsorption and condensed film formation of dodecyl (DTAB)-, tetradecyl (TTAB)-, hexadecyl (CTAB)-, and octadecyl (OTAB)-trimethylammonium bromides on the hanging mercury electrode is studied in KBr as supporting electrolyte, at various temperatures from 5 to 45 degrees C. A condensed film is formed at negative potentials and at room temperature only in the presence of CTAB. The decrease of the temperature favors the formation of the condensed film. A transition temperature is observed for the film formation. Capacity-time curves at the potentials where the film is formed show a nucleation and growth mechanism, with induction time depending not only on the final potential but also on the initial potential range, although it is in the desorption region. In this temperature range no film is observed for DTAB and TTAB. However, the film is observed for OTAB, but only at higher temperatures, and is more easily formed with increasing temperature. The film is formed in a certain potential region and the nucleation rate increases while moving toward more negative potentials. Hysteresis phenomena are observed during changes of scan direction. The capacity vs time curves for OTAB, where condensed film is formed, are treated using an Avrami plot formulation and have been explained as progressive one-dimensional nucleation with a decrease of the nucleation rate during the overall film formation. The results show a marked effect of the chain length of the alkyl chain on the film formation.

Journal Article↗
PubMed1980

Comparison of films processed in automatic and manual processors.

This study compared the quality of Kodak RP X-Omat, Kodak Blue Brand, and Kodak periapical films processed in manual tank. Auveloper, P-10, All-Pro, Philips 810, and RP X-Omat processors. Film quality was evaluated in terms of film fog, image contrast, and resolution. For Kodak RP X-Omat and periapical films, automatic processors produced less film fog and were more consistent in fog production than manual tank processor. The difference in fog production between automatic and manual processors was not clinically significant; indeed, it was visuially undetectable. The difference disappeared when Kodak Blue Brand film was used. For Kodak RPX-Omat and Kodak Blue Brand films, at high film densities, the RP X-Omat processor produced films of the highest image contrast. For periapical films, the manual processor produced the highest image contrast. Image contrast at low densities was nearly the same for all processors. For each type of film, resolution was nearly the same for all processors.

Radiography, Dental↗
PubMed2003

Osteoblastic cell response to thin film of poorly crystalline calcium phosphate apatite formed at low temperatures.

The response of osteoblastic cells to a thin film of poorly crystalline calcium phosphate apatite crystals (PCA) was examined in vitro. The PCA thin film was prepared on polystyrene culture dishes using highly metastable calcium phosphate ion solution at low temperatures. The PCA thin film was formed through fusion and transformation of granular calcium phosphate particles, which had initially formed on the surface, into a film of calcium phosphate apatite crystal. The PCA thin film was used for cell culture without additional surface treatment. The osteoblastic cell behaviors including adhesion, proliferation, expression of the marker genes, and calcified matrix formation were examined on the PCA thin film using primary osteoblasts or MC3T3-E1 cells. The cells were well attached and had spread in a slender shape over the PCA thin film. The extent of cell proliferation on the PCA thin film is as much as on the plain dishes. In addition, a much larger number of calcified nodules had formed on the PCA thin film than on the plain dish. The expression of the marker genes such as alkaline phosphatase, osteocalcin, osteopontin, osteonectin was apparent. These results demonstrate that the osteoblasts exhibit a full spectrum of cellular activity including the adequate differentiation on the PCA thin film. Therefore, a PCA thin film can be used as a coating material for biomaterials where the surface is not adequate for inducing the full activity of bone cells.

3T3 Cells↗
PubMed2000

Platelet adhesion onto segmented polyurethane film surfaces modified by addition and crosslinking of PEO-containing block copolymers.

Polyethylene oxide (PEO) surfaces were prepared by the addition of PEO-containing amphiphilic block copolymers as surface modifying additives and of dicumyl peroxide (DCP) as a crosslinking agent in segmented polyurethane (PU). PEO-polypropylene oxide-PEO triblock copolymers (Pluronics) with different PEO chain length (from 0 to 98) were used as the surface modifying additives. The PEO additives in the PU film were then crosslinked to be stably entrapped in the PU matrix. The crosslinking was done by free radicals produced from the decomposition of DCP in the film through heating (120 degrees C) or ultraviolet irradiation (254 nm). The surface properties of the PEO additive-entrapped PU films were investigated by the measurement of water contact angles and electron spectroscopy for chemical analysis. The bulk properties such as water absorption, long-term film stability, and tensile strength and elongation at break, were also investigated. It was observed that addition of a small amount (5 wt% based on PU) of the PEO additives resulted in a considerable change of surface characteristics. The PEO additives were stably entrapped in the PU films by crosslinking of them, without significant changes of bulk properties of the films. From the platelet adhesion test on the prepared PEO additive-containing film surfaces, it was observed that the platelet adhesion on the surfaces decreases with increase in PEO chain length of PEO additives. The film surface containing additive with long PEO chains (chain length of 98) was particularly effective in preventing platelet adhesion. The crosslinking of the PEO additives in PU films did not affect the behavior of platelet adhesion on the surfaces; the films with crosslinked PEO additives showed similar platelet adhesion on the surfaces to the films with uncrosslinked ones.

Biocompatible Materials↗
PubMed1998

Mucosa-adhesive water-soluble polymer film for treatment of acute radiation-induced oral mucositis.

PURPOSE: To examine the usefulness and safety of a mucosa-adhesive water-soluble polymer film (AD film) containing anesthetics and antibiotics for the treatment of acute radiation-induced oral mucositis. MATERIALS AND METHODS: To prepare AD films, 600 mg of hydroxy-propyl-cellulose was dissolved in ethyl alcohol, and mixed with a solution containing tetracaine, ofloxacine, miconazole, guaiazulene, and triacetin. The gel obtained was dried to form 30 translucent round sheets (20 mg per sheet) of 7.5 cm in diameter and 0.2 mm in thickness. The AD film showed excellent adhesive and coating properties when placed on wet oral mucosa. From 1993 to 1994, we used the AD film in 25 patients with acute radiation-induced oral mucositis, in an attempt to alleviate their pain and prevent secondary oral infection. All patients had received definitive radiotherapy for oral carcinoma. Intensity and duration of oral pain from mucositis, relief rates at rest and while eating, and presence of bacterial and/or fungal infection were compared with those of 27 patients treated with topical anesthetics (viscous lidocaine, Xylocaine and/or general systemic analgesics from 1990 to 1992 (NonAD Group). RESULTS: The intensity of oral pain was the same in the two groups. The mean duration of pain of the AD film Group (10 days) was significantly shortened compared with the NonAD Group (15 days). The rates of complete pain relief at rest and while eating of the AD film Group were statistically higher than those of the NonAD Group: 82% vs. 44%, and 68% vs. 22%, respectively. No secondary bacterial or fungal infections were observed in the AD film Group, whereas 4 cases of documented infections were found in the NonAD Group. No acute or chronic adverse effects of AD film were observed during the 3-year follow-up period. The rates for local control of oral carcinoma and overall survival, at the end of the follow-up period, were 96% and 87% for the AD film Group vs. 92% and 85% for the NonAD Group, respectively. CONCLUSION: The AD film, containing topical anesthetics and antibiotics, proved useful to alleviate pain due to acute radiation-induced oral mucositis, maintain good peroral feeding, and prevent secondary oral infections, without inducing adverse reactions.

Administration, Buccal↗
PubMed2000

Influence of vitamin E TPGS on the properties of hydrophilic films produced by hot-melt extrusion.

Films containing hydroxypropylcellulose (HPC) and polyethylene oxide (PEO) were prepared using a Randcastle extruder (Model 750) with and without Vitamin E TPGS (TPGS, D-alpha-tocopheryl polyethylene glycol 1000 succinate) as an additive. Conventional plasticizers including polyethylene glycol 400 (PEG 400), triethyl citrate (TEC), and acetyltributyl citrate (ATBC) were also incorporated into films containing a 50:50 blend of HPC and PEO. The physical-mechanical properties including tensile strength (TS) and percent elongation (%E) were determined on an Instron according to the ASTM standards. Glass transition temperatures (T(g)) of the extruded films were determined utilizing a DSC 2920 Modulated differential scanning calorimeter and THERMAL ANALYST 2000 software. Gel permeation chromatography was used to study the stability of the polymer films under the processing conditions. The addition of 1, 3, and 5% Vitamin E TPGS, respectively, decreased the glass transition temperature of the extruded films containing either a 50:50 or 80:20 ratio of HPC to PEO in an almost linear fashion. In addition, the presence of 3% Vitamin E TPGS lowered the T(g) over 11 degrees C when compared with the HPC/PEO 50:50 blend film without TPGS, thus functioning as a plasticizer. The tensile strength decreased with increasing concentrations of TPGS, and the %E increased over 3-fold when compared with the HPC/PEO film that contained no additives. The film containing 3% Vitamin E TPGS had a similar tensile strength to that of the films containing 3% PEG 400, and a 3-fold increase in percent elongation when compared with the films containing 3% TEC and 3% ATBC. In addition, the Vitamin E TPGS facilitated the processing of the HPC/PEO films by decreasing the barrel pressure, drive amps, and torque of the extruder equipment.

Administration, Cutaneous↗
PubMed1999

Aqueous ethyl cellulose dispersion containing plasticizers of different water solubility and hydroxypropyl methyl-cellulose as coating material for diffusion pellets II: properties of sprayed films.

This study investigates the properties of sprayed films prepared from aqueous ethyl cellulose dispersions (ECD) containing hydroxypropyl methylcellulose (HPMC) and plasticizers of different water solubility in order to clarify the drug release mechanisms of pellets coated with the respective material. It is of special interest to measure the migration of the water soluble components as well as the physical properties of the swollen ethyl cellulose film. Swelling experiments with sprayed films in 0.1 N-HCl at 37 degrees C show that fairly water soluble plasticizers and the pore forming agent (HPMC) migrated rapidly and almost completely out of the films. The water insoluble plasticizers remain predominantly in the film and the migration rate of HPMC is reduced in a release medium of high ionic strength. The glass transition temperature (T(g)) and the softening temperature (T(s)) of these films after swelling are dependent on the water solubility of the plasticizer. The T(g) of ECD films plasticized with triethyl citrate is above the swelling temperature of 37 degrees C after migration of the plasticizer, transforming the polymer in the glassy state. In contrast, dibutyl phthalate-containing ECD films demonstrate a T(g) below the swelling temperature, leaving the polymer in the rubbery state. The mechanical properties of dry and wet films are studied as a function of the state of curing of the films and of the swelling temperature. On contact with water, a pronounced shrinkage of ECD/HPMC films plasticized with water insoluble plasticizers is observed. All these results are used to explain the different drug release mechanisms of the coated pellets and to enable the prediction and optimization of drug release-rates from coated pellets.

Algorithms↗
PubMed1999

Activity and stability of glucose oxidase in molecular films assembled alternately with polyions.

Anionic glucose oxidase (GOD) was assembled alternately with polycations, namely, poly(ethylenimine) (PEI) and poly(dimethyldiallyl-ammonium chloride) (PDDA), in the preparation of molecular films. Enzymatic activity of the films was investigated by sequential redox reaction with glucose, peroxidase (POD) and DA67 dye. The apparent activity was not influenced by substrate diffusion at up to 5 microg of immobilized GOD (at the area of 5 x 5 mm(2) x 2 faces). This is ascribed to the less dense packing of the alternate molecular film compared with Langmuir-Blodgett (LB) films. Immobilized GOD could be released into solution, and its activity was about 80% of native GOD, indicating that the immobilization did not cause significant denaturation. The enzyme activity of the GOD film was maintained for 14 weeks when stored in buffer and in air at 4 degrees C. Activity measurement after incubation at elevated temperatures showed that significant deactivation was not observed up to 50 degrees C. This shows that GOD in the film has higher thermostability than native GOD. The pH profile of the GOD activity in the film became broad and shifted towards higher pH than that of native GOD. The GOD film was also prepared by the premixing method, in which a GOD-polyion complex was assembled alternately with another oppositely-charged polyion. The enzyme activity of the alternate film obtained by premixing was much higher (maximal enhancement, 67-fold) than that of the conventionally assembled films. Better dispersion of GOD in the premixed film appears to enhance the enzyme activity.

Journal Article↗
PubMed2001

The problem of uniqueness of fit for viscoelastic films on thickness-shear mode resonator surfaces.

We describe a new strategy for interpreting frequency responses of thickness shear mode resonators loaded with spatially uniform viscoelastic films. This procedure leads to unambiguous extraction of the four parameters that characterize such a film: its thickness, density and shear modulus components (storage and loss moduli). The interpretational difficulty is that the experimental frequency response (impedance spectrum) can only provide two parameters; thus, the problem is underdetermined. Previous interpretations employed various approximations and assumptions for two (or more) film parameters to effectively reduce the problem to a two-parameter fit. Such approaches are clearly imperfect. Our new strategy splits the problem into two separate two-parameter sub-problems, each of which is solved by the measurement of two different experimental responses. The result is a unique fit to the data without the need to make approximations or assumptions for film parameters. First, in the acoustically thin regime, measured frequency shift and film charge are combined to provide a unique solution for film thickness and density; shear moduli components do not affect the response in this regime. Second, film density is carried forward directly, and the film thickness-charge relationship is extrapolated into the acoustically thick regime. Third, with film density and thickness held fixed, crystal impedance data in the acoustically thick regime provide unambiguous shear modulus components. The method is generalized to any other (nonelectrochemical) probe that provides film thickness data and validated using crystal impedance data for poly(3-methylthiophene) films exposed to propylene carbonate.

Journal Article↗
PubMed2002

Influence of microstructure on the electrochemical performance of tin-doped indium oxide film electrodes.

The effect of the microstructure of tin-doped indium oxide (ITO) films on their electrochemical performance was studied using three redox probes, tris(2,2'-bipyridyl ruthenium(II) chloride (Ru(bpy)3(2+/3+)), ferrocyanide (Fe(CN)6(4-/3-)), and ferrocenemethanol (FcCH2H(0/+)). ITO films were deposited using dc magnetron sputtering under a variety of conditions that resulted in films having different degrees of crystallinity, crystallographic texture, sheet resistance, surface roughness, and percent tin. It was found that the electron transfer for all three redox probes used in this study was more efficient at polycrystalline films than at amorphous ITO films. This effect is more pronounced at faster scan rates. The crystallographic texture of the ITO films, surface roughness, and a change in sheet resistance from 7.9 to 13.7 ohms/square did not have an effect on electron-transfer kinetics. ITO films deposited using a 1 wt % SnO2 target and having sheet resistance comparable to films deposited using a 10 wt % SnO2 target had dramatically different microstructure from the films with higher weight percent Sn and were shown to perform poorly when used as electrode materials. We believe that the dramatic differences in electron-transfer kinetics observed at the various ITO films can be attributed to either the different density of defect sites along the grain boundaries or defect sites caused by substitutional Sn in the film.

Journal Article↗
PubMed2004

Electron hopping dynamics in monolayer-protected au cluster network polymer films by rotated disk electrode voltammetry.

Electrons are transported within polymeric films of alkanethiolate monolayer-protected Au clusters (MPCs) by electron hopping (self-exchange) between the metal cores. The surrounding monolayers, the molecular linkers that generate the network polymer film, or both, presumably serve as tunneling bridges in the electron transfers. This paper introduces a steady-state electrochemical method for measuring electron hopping rates in solvent-wetted and swollen, ionically conductive MPC films. The films are network polymer films of nanoparticles, coated on a rotated disk electrode that is contacted by a solution of a redox species (decamethylferrocene, CpFe). Controlling the electrode potential such that the film mediates oxidation of the redox probe can force control of the overall current onto the rate of electron hopping within the film, which is characterized as the apparent electron diffusion coefficient D(E). D(E) is translated into an apparent electron hopping rate k(ET) by a cubic lattice model. The experiment is applied to MPC network polymer films linked by alpha,omega-alkanedithiolates and by metal ion-carboxylate connections. We evaluate the dependencies of apparent hopping rate on CpFe concentration, film thickness, electrode potential relative to the CpFe formal potential, film-swelling solvent, and temperature. The apparent hopping rates are in the 10(4)-10(5) s(-)(1) range, which is slower than those for the same kind of MPC films, but in a dry (nonswollen) state measured by electronic conductivities.

Journal Article↗
PubMedDate not supplied

Cell interactions with polyelectrolyte multilayer films.

The short-term interactions of chondrosarcoma cells with polyelectrolyte multilayer films built up by the alternate adsorption of poly(L-lysine) (PLL) and poly(L-glutamic acid) (PGA) was studied in the presence and in the absence of serum. The films and their interaction with serum proteins were first characterized by means of optical waveguide lightmode spectroscopy, quartz crystal microbalance, and zeta potential measurements. In a serum-containing medium, the detachment forces measured by the micropipet technique were about eight times smaller on PGA-ending than on PLL-ending films. For these latter ones, the adhesion force decreased when the film thickness increased. In a serum-free medium, the differences between the negative- and positive-ending films were enhanced: adhesion forces on PLL-ending films were 40-100% higher, whereas no cellular adherence was found on PGA-terminating films. PGA-ending films were found to prevent the adsorption of serum proteins, whereas important protein adsorption was always observed on PLL-ending films. These results show how cell interactions with polyelectrolyte films can be tuned by the type of the outermost layer, the presence of proteins, and the number of layers in the film.

Blood Proteins↗
PubMedDate not supplied

Electrostatic adsorption of heme proteins alternated with polyamidoamine dendrimers for layer-by-layer assembly of electroactive films.

A novel thin film of heme proteins, including hemoglobin (Hb), myoglobin (Mb), and catalase (Cat), was successfully assembled layer by layer with polyamidoamine (PAMAM) dendrimers on different solid surfaces. At pH 7.0, protonated PAMAM possesses positive surface charges, whereas the proteins have net negative surface charges at pH above their isoelectric points. Thus, layer-by-layer {PAMAM/protein}(n)() films were assembled with alternate adsorption of oppositely charged PAMAM and proteins from their aqueous solutions mainly by electrostatic interaction. The assembly process was monitored by quartz crystal microbalance (QCM), UV-vis spectroscopy, and cyclic voltammetry (CV). The growth of the protein multilayer films was regular and linear, whereas the electroactivity of the films was only extended to a few bilayers. CVs of {PAMAM/protein}(n)() films showed a pair of well-defined and nearly reversible peaks characteristic of the protein heme Fe(III)/Fe(II) redox couples. Although {PAMAM/Hb}(n)() and {PAMAM/Mb}(n)() films showed very similar properties, {PAMAM/Cat}(n)() films displayed different and unique characters. The substrates with biological or environmental significance, such as oxygen, hydrogen peroxide, trichloroacetic acid, and nitrite, were catalytically reduced at {PAMAM/protein}(n)() film electrodes, showing the potential applicability of the films as new types of biosensors or bioreactors based on direct electrochemistry of the proteins. Both the electrochemical and electrocatalytic activity of {PAMAM/protein}(n)() films can be tailored precisely by controlling the number of bilayers or the film thickness.

Adsorption↗
PubMed2001

An approach for estimating the permeability of agricultural films.

Plastic tarps currently used during soil fumigation to control emissions have been shown to be permeable to fumigant vapors, resulting in appreciable losses to the atmosphere. New low-permeability films are being developed to reduce fumigant emissions and increase efficacy. A rapid, reliable, and sensitive method is required to measure the permeability of various films that may be used in new management practices. This manuscript presents an approach for estimating the mass transfer coefficient (h) of fumigant compounds across agricultural films. The h is a measure of the resistance to diffusion which, unlike other measures of permeability, is a property of the film-chemical combination and independent of the concentration gradient across the film. This method uses static sealed cells; fumigant vapor is spiked to one side of the film and the concentrations on both sides of the film are monitored until equilibrium. An analytical model is fitted to the data to obtain h. This model relies on a mass balance approach and includes sorption to and diffusion across the film membrane. The method was tested using two polyethylene films and a very low-permeability film and showed that the method produces a sensitive and reproducible measure of film permeability.

Agriculture↗
PubMed2001

Polarity of layer-by-layer deposited polyelectrolyte films as determined by pyrene fluorescence.

The polarity of polyelectrolyte (PE) multilayer films is investigated with pyrene as a polarity-sensitive probe. Multilayer films of poly(styrene sulfonate) (PSS) and various polycations were prepared by the layer-by-layer self-assembly technique. Pyrene (PY) molecules were inserted into the films by exposing the multilayers to pyrene solutions. By this method a homogeneous distribution of pyrene molecules at low concentration within the film was obtained. The ratio of the fluorescence intensities of the first (I) to the third (III) vibronic band (Py-value) of the pyrene emission spectrum is employed here to determine the polarity of the PE films. PSS and poly(allylamine hydrochloride) (PAH) multilayer films yielded a pyrene value close to the solvent polarity of acetone, while multilayers of PSS and poly(diallyldimethylammonium chloride) (PDADMAC) displayed a value higher than the one corresponding to water. The pyrene values of the polyelectrolyte films were independent from the solvent employed for probe dissolving. Although no direct relationship between solvent polarity and dielectric constant (epsilon) is available, an estimate of the static dielectric constant of the films can be provided by comparing the Py-values of the films with those of various solvents. Changes in the humidity conditions of the film environment in a closed cell did not affect the film polarity. However, a drastic and irreversible reduction of polarity could be induced by actively drying the samples by a nitrogen flow.

Journal Article↗
PubMed2006

Aerosol assisted chemical vapor deposition using nanoparticle precursors: a route to nanocomposite thin films.

Gold nanoparticle and gold/semiconductor nanocomposite thin films have been deposited using aerosol assisted chemical vapor deposition (CVD). A preformed gold colloid in toluene was used as a precursor to deposit gold films onto silica glass. These nanoparticle films showed the characteristic plasmon absorption of Au nanoparticles at 537 nm, and scanning electron microscopic (SEM) imaging confirmed the presence of individual gold particles. Nanocomposite films were deposited from the colloid concurrently with conventional CVD precursors. A film of gold particles in a host tungsten oxide matrix resulted from co-deposition with [W(OPh)(6)], while gold particles in a host titania matrix resulted from co-deposition with [Ti(O(i)Pr)(4)]. The density of Au nanoparticles within the film could be varied by changing the Au colloid concentration in the original precursor solution. Titania/gold composite films were intensely colored and showed dichromism: blue in transmitted light and red in reflected light. They showed metal-like reflection spectra and plasmon absorption. X-ray photoelectron spectroscopy and energy-dispersive X-ray analysis confirmed the presence of metallic gold, and SEM imaging showed individual Au nanoparticles embedded in the films. X-ray diffraction detected crystalline gold in the composite films. This CVD technique can be readily extended to produce other nanocomposite films by varying the colloids and precursors used, and it offers a rapid, convenient route to nanoparticle and nanocomposite thin films.

Journal Article↗
PubMed2001

Lateral phase separation in adsorbed binary protein films at the air-water interface.

Lateral phase separation in two-dimensional mixed films of soy 11S/beta-casein, acidic subunits of soy 11 (AS11S)/beta-casein, and alpha-lactalbumin/beta-casein adsorbed at the air-water interface has been studied using an epifluorescence microscopy method. No distinct lateral phase separation was observed in the mixed protein films when they were examined after 24 h of adsorption from the bulk phase. However, when the soy 11S/beta-casein and AS11S/beta-casein films were aged at the air-water interface for 96 h, phase-separated regions of the constituent proteins were evident, indicating that the phase separation process was kinetically limited by a viscosity barrier against lateral diffusion. In these films, beta-casein always formed the continuous phase and the other globular protein the dispersed phase. The morphology of the dispersed patches was affected by the protein composition in the film. In contrast with soy 11S/beta-casein and AS11S/beta-casein films, no lateral phase separation was observed in the alpha-lactalbumin/beta-casein film at both low and high concentration ratios in the film. The results of these studies proved that proteins in adsorbed binary films exhibit limited miscibility, and the deviation of competitive adsorption behavior of proteins at the air-water interface from that predicted by the ideal Langmuir model (Razumovsky, L.; Damodaran, S. J. Agric. Food Chem. 2001, 49, 3080-3086) is in fact due to thermodynamic incompatibility of mixing of the proteins in the binary film. It is hypothesized that phase separation in adsorbed mixed protein films at the air-water and possibly oil-water interfaces of foams and emulsions might be a source of instability in these dispersed systems.

Adsorption↗