Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Spray drying”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33Linked to original sources
PubMed2005

Quantitative analysis of amorphous content of lactose using CCD-Raman spectroscopy.

A Raman spectroscopy method was developed for the quantification of the amorphous content of lactose. Both physical mixtures and spray-dried samples were used and the results were compared with the IMC determinations. Sample inhomogeneities were averaged out by collecting multiple spectra from each sample, and the total measurement time remained below 10 min due to the high sensitivity of the CCD-Raman spectrometer used in the measurements. The obtained calibration error (SEC) for the physical mixtures was 1.3% (w/w) in the 0-100% amorphous content range and was reduced to 0.2% (w/w) in the 0-10% range of more practical interest. The crystallization heat values of the spray-dried samples showed a linear correlation with the Raman quantifications in the amorphous content range of 0-80%, but saturated over the 80% concentration. This finding suggests a reference value of ca. 60 J/g for the spray-dried samples, instead of the crystallization heat of amorphous lactose (ca. 50 J/g) valid in the IMC determinations of physical mixtures.

Lactose↗
PubMed2002

Influence of excipients, drugs, and osmotic agent in the inner core on the time-controlled disintegration of compression-coated ethylcellulose tablets.

The effect of excipient, drug, and osmotic agent loaded in the inner core tablet on the time-controlled disintegration of compression-coated tablet prepared by direct compression with micronized ethylcellulose was investigated. The excipients [spray-dried lactose, hydroxypropyl methyl cellulose, sodium starch glycolate, microcrystalline cellulose, different drugs (sodium diclofenac: model drug, salbutamol sulfate, and theophylline anhydrate) and osmotic agent (sodium chloride)] were used to formulate the composition of the inner core tablet. The result indicates that drug release from all the compression-coated tablets was characterized by a distinctive lag of time followed by a faster drug release, dependent on the types of excipient and drug, and osmotic agent used in the inner core tablet. Respectively, the lag of time was 8.5, 12.4, 14.6, or 15.8 h for spray-dried lactose, hydroxypropyl methyl cellulose, sodium starch glycolate, or microcrystalline cellulose-loaded inner core tablet, as compared with 16.4 h for an inner core made of sodium diclofenac alone. The direct-compressible excipients such as spray-dried lactose, sodium starch glycolate, and microcrystalline cellulose seemed not to illustrate a marked disintegration function to rapidly rapture the outer coating layer. The lag of time was only slightly shortened from 16.4 to 14.6 h, >24 to 17.8 h, or >24 to 21.3 h for sodium diclofenac, theophylline anhydrate, or salbutamol sulfate incorporated with sodium starch glycolate into the inner core tablet, respectively, suggesting that sodium starch glycolate did not perform its superdisintegration. Once an osmotic agent of sodium chloride was incorporated into the inner core tablet, the lag of time for the compression-coated tablet was markedly shortened to <1 h, as compared with 16.4 h for drug alone. The more the amount of sodium chloride added, the less the time of lag obtained. Osmotic pressure did have a key role in controlling the drug dissolution. The present result implies that osmotic function is more suitable than superdisintegration function in designing a compression-coated tablet with time-controlled disintegration.

Albuterol↗
PubMed1999

Improvement in solubility and dissolution rate of 1, 2-dithiole-3-thiones upon complexation with beta-cyclodextrin and its hydroxypropyl and sulfobutyl ether-7 derivatives.

Inclusion complexes between beta-cyclodextrin derivatives and 1, 2-dithione-3-thiones were studied in aqueous solution and in the solid state. Phase solubility study was used to evaluate the complexation in solution, at 37 degrees C, of three cyclodextrins, i. e., beta-cyclodextrin (betaCD), hydroxypropyl-beta-cyclodextrin (HPbetaCD), sulfobutyl ether-7-beta-cyclodextrin (SBE7betaCD), and four 1,2-dithiole-3-thiones, i.e., the parent compound dithiolethione (DTT), dimethyldithiolethione (DMDTT), 5-phenyldithiolethione (5PDTT), and anetholetrithione (ATT). Stability constants of the DTT complexes with HPbetaCD and SBE7betaCD were also determined spectrophotometrically using a nonlinear least-squares methodology. Differential scanning calorimetry (DSC) and scanning electronic microscopy (SEM) were used to characterize spray-dried complexes formed between 5PDTT and SBE7betaCD, ATT and SBE7betaCD. Dissolution studies using the USP paddle method were carried out in water at 37 degrees C for both ATT and 5PDTT binary systems with HPbetaCD and SBE7betaCD. Solubility enhancements were much greater with the more lipophilic ATT and 5PDTT compared to DTT and DMDTT, whatever the cyclodextrin used, in the rank order SBE7betaCD > HPbetaCD >> betaCD. Stability constants obtained (between 120 and 12800 mol(-1)) were also the highest for the more lipophilic drugs and in the same rank order SBE7betaCD > HPbetaCD >> betaCD. Results obtained by UV spectrophotometry were in good agreement with those obtained by phase-solubility study. DSC thermograms of spray-dried complexes of ATT and 5PDTT with HPbetaCD and SBE7betaCD lacked the endothermal peak of pure drug peak which was found for the physical mixtures (107 degrees C and 125 degrees C for ATT and 5PDTT, respectively). Finally, dissolution profiles of spray-dried inclusion complexes studied displayed a faster dissolution rate compared to physical mixtures and pure drugs. The present study showed that complexation of 1,2-dithiole-3-thiones with beta-cyclodextrin derivatives resulted in an increase in solubility, allowing intravenous formulation for bioavailability and metabolism studies and an increase in the dissolution rate of the drugs, which should be of interest for oral absorption of these lipophilic compounds.

2-Hydroxypropyl-beta-cyclodextrin↗
PubMedDate not supplied

Gas chromatographic determination of cholesterol in egg products.

A method has been developed for quantification of cholesterol in fresh egg yolks, spray-dried egg yolks, fresh whole eggs, and spray-dried whole eggs. The method uses saponification followed by petroleum ether extraction of cholesterol. Separation of organic and aqueous layers is enhanced by sodium chloride. Petroleum ether extracts are dried under nitrogen and redissolved in chloroform-methanol (2 + 1) for injection into a gas chromatograph. Cholesterol is separated and quantitated on a high temperature capillary column coated with 5% diphenyl and 95% dimethyl polysilicone crosslinked gum. The method was compared with the current AOAC method 17.017-17.022, and results indicated no significant difference (alpha = 0.05). However, the proposed method allowed separation and analysis of 16 samples in 7 h while the current AOAC method allowed separation and analysis of only 4 samples in 9 h.

Animals↗
PubMed2005

Mucoadhesive microspheres for nasal administration of an antiemetic drug, metoclopramide: in-vitro/ex-vivo studies.

Microparticulate delivery systems designed for the nasal administration of an antiemetic drug, metoclopramide hydrochloride, were prepared. Microspheres composed of sodium alginate, chitosan hydrochloride, or both, were obtained using a spray-drying method; some batches of drug-free microparticles were prepared as a comparison. The morphology, in-vitro swelling behaviour, mucoadhesive properties and drug release from microparticles were evaluated. Ex-vivo drug permeation tests were carried out using sheep nasal mucosa; permeation test of the drug solution was performed as comparison. During ex-vivo permeation tests, transmission electron microscopy (TEM) analyses were carried out on the nasal mucosa to study the morphological changes of epithelial cells and tight junctions, while the change in microsphere morphology was examined using photostereo microscopy (PM). Spray-dried microparticles had a mean diameter (d(vs)) in the range of about 3-10 microm. They showed good in-vitro mucoadhesive properties. In-vitro release profiles and swelling behaviour depended on their composition: the drug release occurred in 1-3 h. Ex-vivo studies showed that drug permeation through the mucosa from microparticles based on chitosan was higher than from those consisting of alginate alone. This can be related to the penetration enhancing properties of chitosan. Complexation of chitosan with alginate led to a control of the drug release. Microscopy observation of microspheres during the permeation tests revealed that microparticles swelled and gelled, maintaining their shape. TEM analyses of the mucosa after exposure to the microparticles consisting of alginate/chitosan showed opened tight junctions. This preliminary study shows that alginate/chitosan spray-dried microspheres have promising properties for use as mucoadhesive nasal carriers of an antiemetic drug.

Adhesiveness↗
PubMed1998

Influence of surface properties at biodegradable microsphere surfaces: effects on plasma protein adsorption and phagocytosis.

OBJECTIVE: The objective of this work was to determine plasma protein adsorption and macrophage phagocytosis of biodegradable polyanhydride, polylactic acid and polylactic-co-glycolic acid microspheres prepared by both spray-drying and solvent evaporation techniques. METHODS: Microspheres were characterized by scanning electron microscopy (SEM), confocal laser microscopy, particle size distribution and zeta (zeta) potential determination. Plasma protein adsorption onto the microspheres was determined using a fluoroaldehyde reagent. Phagocytosis was evaluated by incubating microspheres containing the angiotensin II antagonist, L-158,809, with the macrophages in the presence or absence of the phagocytosis inhibitor cythochalasin D. The extent of phagocytosis was established by fluorescence determination of L-158,809 and by optical microscopy. The effect of amphiphilic poly(ethylene glycol) (PEG) derivatives on phagocytosis was determined using PEG-distearate incorporated into the microspheres. RESULTS: The average diameter of the microspheres, which depended on the polymer and the initial formulation, ranged from 0.9 to 3.2 micrometers. Zeta potential studies showed strong negative values irrespective of the polymer used for the spray-dried formulations. The zeta potential was masked by the incorporation of PEG 400- or PEG 1,400-distearate in the formulation. Confocal laser microscopy showed a homogenous dispersion of PEG (measured as PEG-fluorescein) in the microspheres. Protein adsorption was not observed for any of the microsphere formulations following incubation with bovine serum. Incubation of microspheres with murine macrophages showed that PEG-distearate inhibited phagocytosis at appropriate levels (0.1% w/w). Higher levels > 1% w/w of PEG-distearate) resulted in enhanced association with macrophages, despite the presence of the phagocytosis inhibitor cytochalasin D, indicating fusion between the microspheres and the plasma membrane. CONCLUSIONS: These results demonstrate that spray-dried PEG-containing microspheres can be manufactured and that an appropriate concentration of this excipient in microspheres results in decreased phagocytosis.

Adsorption↗
PubMed1998

Influence of the microencapsulation method and peptide loading on poly(lactic acid) and poly(lactic-co-glycolic acid) degradation during in vitro testing.

Three methods were used, namely spray drying, w/o/w solvent evaporation and the aerosol solvent extraction system (ASES), for the preparation of microparticles having the same size range, to study the influence of the preparation method on polymer degradation in vitro (PBS, 37 degrees C, one month). The following five polymers of the biodegradable poly(lactic acid) (PLA) and poly(lactic-co-glycolic acid) (PLGA) group were selected: L-PLA, MW 81 200; DL-PLGA 75:25, MW 64-300; DL-PLGA 50:50 MW 52 600; DL-PLGA 50:50 MW 14 500, AND DL-PLGA 50:50, MW 3400, to prepare drug-free and drug-loaded microparticles. Tetracosactide was selected as model peptide. When microparticles were prepared by solvent evaporation, the mean diameter and, more markedly, the drug encapsulation efficiency tended to decrease when decreasing the molecular weight and increasing the proportion of glycolic acid in the polymer. In contrast, no direct influence of the polymer nature on these parameters was observed in spray dried microparticles. Polymer degradation was heterogenous in L-PLA and DL-PLGA 75:25 microparticles and was not influenced by the presence of the drug at a nominal loading of 1% (w/w), when prepared by the three methods (note that with ASES, only L-PLA could be used for microencapsulation). In batches made of DL-PLGA 50:50 MW 52 600, the degradation rate decreased slightly when increasing the drug loading. Only in the case of DL-PLGA 50:50 MW 14 500, the polymer degradation rate for spray dried microparticles was higher compared to that for microparticles prepared by the w/o/w solvent evaporation method. Generally, the degradation rates of the different microparticles followed the expected order: L-PLA<DL-PLGA 75:50<DL-PLGA 50:50(Mw 52 600)<DLPLGA 50:50 (a mixture of MW 52 600 and MW 3400). Polymer degradation was homogenous in DL-PLGA 50:50 microparticles. Decreasing the molecular weight of DL-PLGA 50:50 from 52 600 to 14 500 did not result in accelerated polymer degradation.

Aerosols↗
PubMed2005

Survival of Lactobacillus sakei during heating, drying and storage in the dried state when growth has occurred in the presence of sucrose or monosodium glutamate.

Spray-dried cells of Lactobacillus sakei CTC 494 survived ca. 60% longer in the spray dried state when cells were grown in the presence of 20 g sucrose l(-1) or 12.5 g monosodium glutamate l(-1). No significant differences were observed in viability during storage in the freeze dried state with the addition of these compounds to the growth medium, nor in survival during a heat treatment (55 degrees C). Both sucrose and glutamate in the growth medium suppressed intracellular accumulation of total amino acids and changed the overall pattern of the individual amino acids. Glutamate in the growth medium enhanced intracellular glutamate by ca. 38%.

Cell Proliferation↗
PubMed2003

The effect of preparation procedures on the morphology of melanin from the ink sac of Sepia officinalis.

The structure of melanin extracted from the ink sac of the cuttlefish Sepia officinalis was examined for different methods of isolation and purification of the pigment. Scanning electron microscopy (SEM) images of Sepia eumelanin prepared by different procedures establish that multi-microm-sized aggregates reported by previous workers are generated by their sample preparation, and that the dominant constituents of Sepia melanin are approximately 150 nm spherical granules. Brunauer-Emmett-Teller (BET) measurements reveal that Sepia eumelanin from Sigma (prepared by spray drying the pigment) has a surface area of 14.3 m2/g. Pigment extracted directly from the fresh ink sac and then freeze-dried has a surface area of 21.5 m2/g, while CO2-supercritically dried has a surface area of 37.5 m2/g. This is consistent with SEM images showing that the process of freeze-drying produces aggregates, but to a lesser extent than spray drying. Supercritical drying of the sample produces suspensions of the individual approximately 150 nm granule, which is more reflective of the natural pigment. Brunauer-Emmett-Teller surface area analysis and Barrett-Joyner-Halenda (BJH) pore volume analysis indicate that the surface of the granules is not smooth and the interior of the granules is not porous, but rather the aggregates of granules are porous. Ultra-high resolution SEM and atomic force microscopy (AFM) images show the granules are easily deformed and are comprised of smaller constituents. De-aggregation of the granules by sonication and ultra-filtration reveal a range of structures depending on the pore size of the membrane used. The implications of these results on quantifying photochemical properties and kinetic reaction rate constants of melanin are discussed.

Animals↗
PubMed1976

Milk-substitute diet composition and abomasal secretion in the calf.

1. The effect of different protein sources in milk-substitute diets on abomasal acidity and proteolytic activity was studied in Friesian calves, aged 20-58 d (Expt 1). The diets contained 'mildly' preheated, spray-dried skim-milk powder (MHM), severely preheated, spray-dried skim-milk powder (SHM), fish-protein concentrate (FPC) or solvent-extracted soya-bean flour (SF) as the main protein source. 2. Gastric juice was collected from abomasal pouches before feeding and at 15 min intervals for 8 h after the morning feed. Samples of digesta were obtained from the abomasum at 1 h intervals during the same period. 3. Digesta pH was lower and titratable acidity higher 0-3 after giving the diet containing MHM than when any of the other three diets was given. 3. Acid secretion from the pouches for the different diets was in the order: FPC greater than MHM greater than SHM greater than or equal to SF. 5. Protease secretion from the pouches, assayed at pH 2-1, was in the order: MHM greater than SHM = FPC greater than SF. 6. The effect of dry matter (DM) intake and concentration on abomasal acidity was also studied in calves given diets which contained MHM (Expt 2). This diet was reconstituted at either 100 or 149 g DM/kg liquid diet and fed at either 32-5 or 49-0 g DM/kg live weight 0-75 per d. Samples of abomasal digesta were collected as in Expt 1. 7. A high intake of DM at a low DM concentration resulted in low acidity of the digesta in the first 3 h after feeding, which suggested a dilution effect. Comparison of two diets of different DM concentration, which were fed in the same volume of liquid, indicated that the greater the DM intake, the greater was the amount of acid secreted. 8. It is concluded that the protein sources varied in their ability to stimulate abomasal acid and protease secretion and it is suggested that this may relate to calf performance.

Abomasum↗
PubMed1985

[Functional properties and possible uses of a hydrolysate of pepitona (Arca zebra) in the preparation of foods].

The present study revealed that the drum-drying and spray-drying procedures used on the pepitona (Arca zebra) hydrolysate, as well as the storage time, exert a deteriorative significant effect on the functional properties of both hydrolysates. The greatest and more significant losses of the majority of such properties occur during the first two months of storage period. Thus, in the case of foaming capacity, losses ranging from 17% to 34% were detected in the drum-dried hydrolysate, and of 38% to 49% in the hydrolysate dehydrated using a spray drier, during the first two months of storage. The emulsifying capacity was also altered in 14% of the hydrolysate dehydrated in a drum drier, and in 25% of the hydrolysate dehydrated using a spray drier. Sensory evaluation tests demonstrated the potential of both hydrolysates for use as supplements of conventional foods such as cookies and extruded products.

Desiccation↗
PubMed2003

Compactibility of agglomerated mixtures of calcium carbonate and microcrystalline cellulose.

The tablet tensile strength (T) of agglomerated mixtures of microcrystalline cellulose-Avicel PH 102 (MC), calcium carbonate (CC) and polyvinylpyrrolidone (Povidone, PVP), lubricated with magnesium stearate (MS), and formed under a compaction pressure (P(c)) ranging up to 618MPa has been determined. The compactibility was defined through: ln(-ln(1-T/T(max)))=Slope x lnP(c)+Intercept. MC/CC mixtures added of an agglutinant, before and after lubrication, show an important positive effect on their tablet tensile strength compared to a lineal relationship. This positive effect becomes smaller with decreasing compaction pressures. By different mixing methods, the higher the mixing efficiency the higher the compactibility, following the order: spray-dried>wet massing>tumble mixing. The compactibility of MC/CC/PVP spray-dried mixtures with calcium carbonate content from 20 to 60% was equal to or greater than that of pure microcrystalline cellulose. After lubrication with 2% MS the compactibility decreased, only the mixture with the maximal tablet tensile strength attained the tensile strength of pure microcrystalline cellulose. The presence of the binder, the lubricant and higher compaction pressures allow the accommodation of higher calcium carbonate proportions in the mixtures, at the maximal tablet tensile strength of the series. The lubricant decreases in a greater extent the compactibility of mixtures with a continuous phase of MC/PVP than that of CC/PVP. This is attributed to the plastic behavior of the MC/PVP continuous phase compared to a calcium carbonate continuous phase able to disrupt the Povidone and the possible lubricant coatings allowing a stronger interparticle interaction.

Calcium Carbonate↗
PubMed1983

Effect of added methionine and lysine on the performance of chicks fed different alfalfa protein concentrates.

Experiments were conducted to determine the limiting amino acids in chick diets containing 40% spray-dried heat coagulated alfalfa protein concentrate (APC) and 40% spray-dried fermented alfalfa protein concentrate (FAPC). Significant improvements in chick gains were observed when methionine (met) was supplemented to the 40% APC (82 vs. 119 g) and 40% FAPC (72 vs. 95 g) diets. Feed efficiency (gain/feed) was also improved by met supplementation (.233 vs. .343) to APC and (.236 vs. .299) in FAPC diets. Supplementation of lysine (lys) alone did not improve the gain in body weight in either APC or FAPC, but the addition of lysine improved the feed efficiency of chicks fed the FAPC + Met (.323).

Animals↗
PubMed1989

[Adsorbed plant extracts, use of extracts of dried seeds of Orthosiphon stamineus benth].

The work presented is related to the elaboration and the control of spray dried vegetable extracts of Orthosiphon Stamineus Benth. From these studies, it feasibility of the spray dried extracts. The best result concerning a pulverulent structure and the stability under moisture conditions is obtained using Aerosil 200. Pharmacological studies on rats have shown a diuretic activity under our experimental conditions with alcoholic and water extracts.

Diuretics↗
PubMedDate not supplied

R4 peptide-pDNA nanoparticle coated HepB vaccine microparticles: sedimentation, partitioning, and spray freeze dry bioprocesses.

Broad therapeutic application of nucleic acid micro- and nanoparticles will require bioprocesses capable of achieving high loads of structurally intact and functionality active DNA. Here we report condensation of pDNA into nanoparticles by sedimentation through R4 peptide and partitioning at a hydrophobic interface. > or = 90% coating efficiency onto microparticles is achieved via this combined bioprocess with the pDNA retaining 85-90% intact supercoil after bioprocessing. SEM analyses of the microparticles produced therefrom reveals bound pDNA and R4 peptide nanoparticles. HPLC and chemical analyses afford quantification of the particle-associated pDNA and R4 peptide along with lactose, raffinose, or trehalose carbohydrate stabilizer, surface coatings uniformly applied by spray freeze-drying. Administration of these particles by gene gun demonstrates delivery to the nucleus of expressive nanoparticles and into rodents and pigs pronounced immunogenicity even after bioprocessing and accelerated degradation. These data support the discovery of a robust bioprocess platform for preparing macromolecule bound bioparticles with potential relevance beyond simple preparation of bioactive DNA vaccine.

Coated Materials, Biocompatible↗
PubMed2005

Modified polyvinylalcohol for encapsulation of all-trans-retinoic acid in polymeric micelles.

All-trans-retinoic acid (ATRA) is now included in many antitumor therapeutic schemes for the treatment of acute promyelocytic leukaemia, Kaposi's sarcoma, head and neck squamous cell carcinoma, ovarian carcinoma, bladder cancer and neuroblastoma. Unfortunately its poor aqueous solubility hampers its parenteral formulation. To date, there is no parenteral formulation of ATRA commercially available and oral administration of ATRA is associated with progressively diminishing ATRA levels in plasma, which is related to induction of retinoic acid-binding protein and increased drug catabolism by cytochrome P-450-mediated reaction. An ATRA formulation, obtained by complexation of the drug into polymeric micelles, might be suitable for parenteral administration overcoming these unwanted effects. To this purpose we prepared an amphiphilic polymer by polyvinylalcohol (PVA) substitution with oleyl amine at 1.5% substitution degree (mol substituent per 100 mol hydroxyvinylmonomer) and evaluated its functional properties with regard to ATRA complexation. The substituted polymer displayed ability to interact with ATRA both in aqueous solution and in the solid state following spray-drying of drug-polymer hydro-alcoholic solutions. The spray-dried complexes rapidly dissolved in water providing high levels of ATRA solubilization as a function of the drug-polymer weight ratio. The complexes characterized by 1:5 drug-polymer weight ratio provided higher levels of ATRA solubilization than 1:3 and 1:10 drug-polymer weight ratios respectively. Pre-formed polymeric micelles in water equilibrated in the presence of excess solid ATRA provided the lowest levels of solubilization. The drug release from the complexes was very slow in PBS, indicating their suitability in antitumor drug targeting where a fundamental requirement is stability towards drug release for at least 24 h, corresponding to the average circulation time period of macromolecular carriers. The cytotoxicity studies against neuroblastoma cell lines outlined increased cytotoxicity of complexed ATRA with respect to free ATRA, likely due to the increased bioavailability of the hydrophobic drug from the complex. We conclude that ATRA entrapped into self-assembling polymer micelles may be a useful parenteral ATRA formulation overcoming the unwanted pharmacological mechanism that lead to acquired retinoid resistance.

Amines↗
PubMed1999

Influence of particle size, air flow, and inhaler device on the dispersion of mannitol powders as aerosols.

PURPOSE: To study the effect of particle size, air flow and inhaler type on the dispersion of spray dried mannitol powders into aerosols. METHODS: Mannitol powders were prepared by spray drying. The solid state properties of the powders were determined by laser diffraction, X-ray powder diffraction, scanning electron microscopy, freeze fracture, Karl Fischer titration and gas pycnometry. The powders were dispersed using Rotahaler and Dinkihalerg, connected to a multistage liquid impinger at different air flows. RESULTS: Three crystalline mannitol powders with primary particle size (MMD) 2.7, 5.0, 7.3 microm and a similar polydispersity were obtained. The particles were spherical with a density of 1.5 g/cm3 and a moisture content of 0.4 wt.%. At an air flow of 30 L/min all the powders were poorly dispersed by both inhalers. With the Rotahaler increasing the flow (60-120 L/min) increased the fine particle fraction (FPF) in the aerosols for the 2.7 microm powder, and decreased the FPF for the 7.3 microm powder; whereas the FPF for 5.0 microm powder was unaffected. With the Dinkihaler, all the powders were near complete dispersion at > or = 60 L/min. CONCLUSIONS: The FPF in the mannitol powder aerosols was determined by an interplay of the particle size, air flow and inhaler design.

Aerosols↗
PubMed1995

Plasma protein for pigs weaned at 19 to 24 days of age: effect on performance and plasma insulin-like growth factor I, growth hormone, insulin, and glucose concentrations.

Three experiments were conducted to evaluate spray-dried porcine plasma (SDPP) protein in diets for early weaned pigs. In Exp. 1, 144 weanling pigs (24 +/- 4 d of age) were used to determine the effects of replacing dried skim milk (DSM) with either 4% SDPP or 2.75% spray-dried blood meal (SDBM) in Phase 1 diets (d 0 to 14 postweaning). During 0 to 14, pigs fed SDPP or SDBM had higher ADG (P < .05) and ADFI (P < .1) than those fed DSM. Pigs fed SDPP had greater (P < .05) ADG and ADFI (P < .1) than those fed SDBM. In Exp. 2, performance was similar in pigs fed two plasma protein sources (AP-820 and MP-722). In Exp.3, 18 weanling pigs (19 to 20 d of age) were used to determine the effects of feeding high levels of SDPP on performance and on plasma IGF-I, growth hormone, insulin, and glucose concentrations. Pigs were fed either a control diet containing 21.5% soybean meal (SBM) or a diet containing 14% SDPP. Treatments were applied for 14 d (Phase 1). During d 0 to 14, pigs fed a SDPP had a greater ADG and ADFI (P < .05) than pigs fed SBM. Replacing SBM with SDPP did not affect plasma IGF-I and glucose concentrations. However, SDPP replacement increased (P < .06) plasma growth hormone concentrations. Insulin levels were greater (P < .06) in pigs fed SBM than in those fed SDPP. These results indicate that SDPP and SDBM are effective alternatives to DSM or SBM in Phase 1 diets and the two plasma protein sources will produce similar performance. The factor(s) responsible for this improved performance does not seem to involve a change in plasma IGF-I.

Aging↗