Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Microscopy, Scanning Probe”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32Linked to original sources

Participation of the GM1 ganglioside in the gastrulation of anuran amphibian Bufo arenarum.

In the present paper we established the ganglioside composition of the blastula and gastrula stages of the anuran amphibian Bufo arenarum, two relevant stages characterized by dynamic changes in morphology and cellular rearrangements. Densitometric studies evidenced that GD1a and GT1b were the more abundant gangliosides of the blastula embryos whereas GM1 and GM2 were the predominant species in gastrula embryos. Analysis of ganglioside abundance indicates that the "a" and "b" synthesis pathways perform similar biosynthetic activities in the blastula stage, in contrast to the gastrula stage in which a marked predominance of the "a" pathway occurred. The spatio-temporal expression of GM1 and of polygangliotetraosyl ceramides (pGTC) was investigated by wholemount immunocytochemistry using cholera toxin B subunit (CTB) and an affinity purified human anti-GM1 antibody. The pGTC were detected as GM1 after treatment with neuraminidase. Blastomeres from the inner surface of the blastocoelic roof (BCR) of blastula embryos were GM1 and pGTC positive. At midgastrula stage, embryos showed an increased labeling on the inner surface of BCR. To establish whether the GM1 ganglioside was involved in the gastrulation processes, CTB, anti-GM1 antibodies and anti-GM1 Fab' fragments were microinjected into the blastocoel cavity of blastula embryos. Treatment with the probes blocked gastrulation. Scanning electron microscopy analysis of blocked embryos revealed that mesodermal cell migration, radial interdigitation, and convergent extension movements were affected. The blocking of gastrulation was correlated with the absence of fibronectin and EP3/EP4 on the inner surface of blastocoelic roof of CTB- or anti-GM1 treated embryos. Results show that the GM1 ganglioside is differentially expressed by embryonic cells and participates in the morphogenetic processes of amphibian gastrulation. J. Exp. Zool. 286:457-472, 2000.

Animals↗

Concurrent microscopic observations and activity measurements of cellulose hydrolyzing and methanogenic populations during the batch anaerobic digestion of crystalline cellulose.

This study compares process data with microscopic observations from an anaerobic digestion of organic particles. As the first part of the study, this article presents detailed observations of microbial biofilm architecture and structure in a 1.25-L batch digester where all particles are of an equal age. Microcrystalline cellulose was used as the sole carbon and energy source. The digestions were inoculated with either leachate from a 220-L anaerobic municipal solid waste digester or strained rumen contents from a fistulated cow. The hydrolysis rate, when normalized by the amount of cellulose remaining in the reactor, was found to reach a constant value 1 day after inoculation with rumen fluid, and 3 days after inoculating with digester leachate. A constant value of a mass specific hydrolysis rate is argued to represent full colonization of the cellulose surface and first-order kinetics only apply after this point. Additionally, the first-order hydrolysis rate constant, once surfaces were saturated with biofilm, was found to be two times higher with a rumen inoculum, compared to a digester leachate inoculum. Images generated by fluorescence in situ hybridization (FISH) probing and confocal laser scanning microscopy show that the microbial communities involved in the anaerobic biodegradation process exist entirely within the biofilm. For the reactor conditions used in these experiments, the predominant methanogens exist in ball-shaped colonies within the biofilm.

Anaerobiosis↗

A study of the reaction of human tissue to proplast.

The femoral stems of Thompson prostheses coated with a polytetrafluoroethylene/carbon fiber composite (proplast) were studied using conventional histological examination, scanning electron microscopy and electron probe microanalysis in "successful" firm implants and in a "loose" clinically unsuccessful implant. Ingrowth was found throughout the coatings of the successful prostheses. In the most firmly fixed prosthesis the ingrowth consisted of fibrous tissue with abundant giant cells; however, no bone ingrowth was detected. There was less composite pore infilling in the unsuccessful implant. From both clinical, radiological and the studies described above, it is concluded that fibrous tissue ingrowth was a secondary stabilizing phenomenon in the proplast-coated prostheses studied.

Aged↗

Influence of alloy composition on the hardening of silver-tin dental amalgam.

The objective of the investigation was to examine the reactions of mercury with silver-tin alloys with compositions spanning the phase fields beta, (beta + gamma), gamma, and (gamma + Sn). The experimental methods employed include the application of light microscopy, scanning electron microscopy, and electron probe microanalysis. These techniques were used to investigate the mechanisms of reaction and to identify the nature and morphology of the reaction products formed on bulk specimens of the alloys. The progress and characteristics of the reactions that occur during hardening of amalgams prepared from powders of these alloys were monitored using a high-sensitivity dilatometer. These results were correlated with direct observations on the development of the microstructures. The reaction of mercury with the beta-phase alloy occurred rapidly and resulted in a very marked and rapid expansion during the initial stages of hardening. gamma-Phase alloys, on the other hand, reacted more slowly and contracted markedly during hardening. The behavior of amalgams made from alloys with compositions lying between these two extremes appeared to be explicable in terms of the characteristics of the separate phases from which they were constituted.

Absorption↗

Investigation of contemporary gilded forgeries of ancient coins.

Four contemporary forgeries of ancient gold coins were investigated regarding techniques used for gilding, and the composition of the gold cover and the base metal core. The forged coins are a Daric of the Persian Empire, a Gold Stater in the name of Alexander, and two Solidi of the late Roman Empire. A combination of modern analytical methods such as Scanning Electron Microscopy (SEM), Electron Probe Micro Analysis (EPMA), X-Ray Fluorescence Spectrometry (XRF), and SecondaryIon Mass Spectrometry (SIMS) was used. The results demonstrate that the coins represent the main three technologies of gilding used in antiquity. The core of the Daric is a silver Siglos, plated by leaf gilding. The Gold Stater was forged by foil gilding using a silver core. The Roman Solidi have a core of either silver or copper and were plated by fire gilding. On account of our results it is possible to compare the forgers' profits made by use of the different technologies of forging.

Journal Article↗

Constitutive arginine-dependent nitric oxide synthase activity in different organs of pea seedlings during plant development.

Nitric oxide (NO) is an important signalling molecule in different animal and plant physiological processes. Little is known about its biological function in plants and on the enzymatic source or site of NO production during plant development. The endogenous NO production from L-arginine (NO synthase activity) was analyzed in leaves, stems and roots during plant development, using pea seedlings as a model. NOS activity was analyzed using a novel chemiluminescence-based assay which is more sensitive and specific than previous methods used in plant tissues. In parallel, NO accumulation was analyzed by confocal laser scanning microscopy using as fluorescent probes either DAF-2 DA or DAF-FM DA. A strong increase in NOS activity was detected in stems after 11 days growth, coinciding with the maximum stem elongation. The arginine-dependent NOS activity was constitutive and sensitive to aminoguanidine, a well-known irreversible inhibitor of animal NOS, and this NOS activity was differentially modulated depending on the plant organ and seedling developmental stage. In all tissues studied, NO was localized mainly in the vascular tissue (xylem) and epidermal cells and in root hairs. These loci of NO generation and accumulation suggest novel functions for NO in these cell types.

Arginine↗

Plasma-sprayed hydroxyapatite+titania composite bond coat for hydroxyapatite coating on titanium substrate.

A two-layer hydroxyapatite (HA)/HA+TiO(2) bond coat composite coating (HTH coating) on titanium was fabricated by plasma spraying. The HA+TiO(2) bond coat (HTBC) consists of 50 vol% HA and 50 vol% TiO(2) (HT). The microstructural characterization of the HTH coatings before and after heat treatment was conducted by using scanning electron microscopy (SEM), electron probe microanalyser (EPMA), X-ray diffractometer (XRD) and transmission electron microscopy (TEM), in comparison with that of HT coating and pure HA coating. The results revealed that HA and TiO(2) phases layered in an alternating pattern within the HTBC, and the HTBC bonded well to HA top coating (HAT coating) and Ti substrate. The as-sprayed HT coating consists mainly of crystalline HA, rutile TiO(2) and amorphous Ca-P phase. The post-spray heat treatment at 650 degrees C for 120 min effectively restores the structural integrity of HA by transforming non-HA phases into HA. It was found that there exists interdiffusion of the elements within the HTBC, but no chemical product between HA and TiO(2), such as CaTiO(3) was formed. The cross-sectional morphologies confirmed that there is a shift towards a relatively tighter bonding from the HAT coating/HTBC interface in the as-sprayed HTH coating to the HTBC/Ti substrate interface in the heat-treated HTH coating. On quenching the coatings into water, the surface cracking indicates more apparently the positive effect of the HTBC on the decrease of residual stress in HAT coating. The in situ surface cracking also suggests that the stress on the surface of the HTH coating is stable under subjection to a repetitious heat treatment. The toughening and strengthening of HTBC is thought to be mainly due to TiO(2) as obstacles embarrassing cracking, the reduction of the near-tip stresses resulting from stress-induced microcracking and the decrease of CTE mismatch. In the HTH composite coating, the HAT coating is toughened by the decreased CTE mismatch with Ti through the addition of HTBC, which bonds well to the Ti substrate via its TiO(2) hobnobbing with the Ti oxides formed on Ti substrate.

Coated Materials, Biocompatible↗

Division and microstructure feature in the interface transition zone of Fe3Al/Q235 diffusion bonding.

The microstructure near a diffusion interface was studied by means of scanning electron microscopy and electron probe microscopy, and the results indicated that the interface transition zone of Fe3Al/Q235 dissimilar materials was composed of a diffusion interface, a mixed transition region, and A/B transition regions at the sides of the interface. Microstructures of the interface and base materials were interlaced to form the microstructure of layer characteristic. With increased heating temperature and holding time, the width of the Fe3Al/Q235 interface transition zone increased and the microstructure gradually became coarse. The microhardness in the diffusion transition zone was decreased and there was a peak value at the diffusion interface. The distribution of Al, Fe, and Cr in the interface transition zone was increased or decreased monotonically with some local concentration fluctuation. There was nearly no change in the concentration of C element near the interface.

Journal Article↗

Analysis of fiber probes of scanning near-field optical microscope by field emission microscopy.

It is shown that field emission microscopy and related methods can be used to analyze the metal coated fiber tips, which nowadays are the most frequently used sensor for the scanning near-field optical microscopy (SNOM). Metal free and thus non field-emitting aperture for the light transmission on the tip apex can be directly seen and its parameters can be measured, which is very important for the interpretation of SNOM data.

Journal Article↗

Calcium.

Ca2+ is involved in an intriguing variety of different biological events. The rapid development of techniques such as region- or organelle-directed fluorescent probes and laser scanning confocal microscopy for studying cellular biological events at a molecular level provides us with a rich daily intake of new results. While detailed three-dimensional structures of many intracellular and extracellular Ca2+-binding proteins have become available, structural information on key membrane proteins is still lacking. An integrated picture of the molecular events behind the multifunctional roles of Ca2+ in biological systems is still pending.

Cadherins↗

Investigation of winter atmospheric aerosol particles in downtown Katowice using XPS and SEM.

X-ray photoelectron spectroscopy (XPS) was used to determine the surface chemical composition of atmospheric particles (PM-10 and PM-2.5), collected in downtown Katowice, Upper Silesia, Poland, in the winter season (November and December 2000). Carbon- and oxygen-containing species dominated the particulate surface with traces of N, S, Si, Cl, Na, Zn, Al, Cu, Fe, Ca, K, Mg, Pb, and P present. Additionally, the size, morphology, and chemical composition of about 300 of the individual atmospheric particles were analyzed by high-resolution scanning electron microscopy and electron probe microanalysis. A number of aluminosilicates and metallic elements such as Fe, K, Mg, Zn, as well as rare earth elements, were detected by SEM. The results obtained show that the analyzed aerosol is of natural and anthropogenic origin. Particles containing sulfur compounds as well as oxygen and sodium in downtown Katowice come mainly from the east and southeast sectors.

Journal Article↗

Nanomechanical detection of DNA melting on microcantilever surfaces.

We observe surface stress changes in response to thermal dehybridization, or melting, of double-stranded DNA (dsDNA) oligonucleotides that are grafted on one side of a microcantilever beam. Changes in surface stress occur when one complementary DNA strand melts and diffuses away from the other, resulting in alterations of the electrostatic, counterionic, and hydration interaction forces between the remaining neighboring surface-grafted DNA molecules. We have been able to distinguish changes in the melting temperature of dsDNA as a function of salt concentration and oligomer length. This technique also highlights differences between surface immobilized and solution DNA melting dynamics, which allows us to better understand the stability of DNA on surfaces. The transduction of phase transitions into a mechanical signal is ubiquitous for DNA, making cantilever-based detection a widely useful and complementary alternative to calorimetric and fluorescence measurements.

DNA↗

Fabricating and controlling molecular self-organization at solid surfaces: studies by scanning tunneling microscopy.

This account presents a summary of recent work describing the control and fabrication of self-organized molecular adlayers on solid substrates. These results demonstrate that molecules, under appropriate conditions, will self-organize into well-ordered monolayers on various solid surfaces. Using scanning tunneling microscopy (STM) to probe the structure of these molecular architectures, it is possible to determine the surface quality to single molecule resolution. The surface structures can be controlled by external stimuli such as electrode potential and UV-light. The ability to control how these adlayers form is important for constructing surface molecular architectures with useful properties.

Journal Article↗

Structures and displacement of 1-adamantanethiol self-assembled monolayers on Au{111}.

We have designed monolayers with weak intermolecular interactions for use as placeholders in intelligent self- and directed-assembly. We have shown that these 1-adamantanethiolate monolayers are labile with respect to displacement by exposing them to dilute solutions of alkanethiols. These self-assembled monolayers (SAMs) of 1-adamantanethiol on Au{111} were probed using ambient scanning tunneling microscopy (STM), and their assembled order was determined. Solution deposition of the molecules results in a highly ordered hexagonally close-packed molecular lattice with a measured nearest neighbor distance of 6.9 +/- 0.4 A. The SAMs exhibit several rotational domains, but lack the protruding domain boundaries typical of alkanethiolate SAMs, and are similarly stable at room temperature. Co-deposition of alkanethiol and 1-adamantanethiol from solution results in alkanethiolate SAMs, except when using extremely low alkanethiol to 1-adamantanethiol concentration ratios. Facile displacement of low interaction strength SAMs can be exploited to enhance patterning using soft nanolithography.

Journal Article↗

Hexameric and pentameric slipped-cofacial dimers: toward an artificial light-harvesting complex.

[structure: see text] We prepared a zinc complex of bis(1-methylimidazolyl)-m-gable porphyrin. The automatically assembled coordinate species showed a complex mixture of wide molecular weight distributions accompanied with assemblies of specific assembly numbers. When this zinc complex was once dissociated by the addition of methanol and reorganized again by elimination of the methanol under high-dilution conditions in chloroform to facilitate intramolecular coordinate structure formation, two convergent assemblies were obtained through analysis by gel permeation chromatography. These assemblies gave round-shaped particles on solid substrates by probe microscopies (atomic force and scanning tunneling microscopies). These two components were separated by GPC and evidence from small-angle X-ray scattering measurements in solution with synchrotron radiation was consistent with hexameric and pentameric macrorings of the gable porphyrin. The porphyrin macrorings did not show any fluorescence quenching by assembly formation, and we anticipate that the macrorings of gable porphyrins represent a good model for an artificial light-harvesting complex.

Journal Article↗

Characterization of anodic spark-converted titanium surfaces for biomedical applications.

The aim of the present study was to characterize the surface morphology, microstructure and the chemical composition of anodic spark-converted titanium surfaces. The coatings were prepared in an electrochemical cell by the anodic spark deposition technique in an aqueous solution of Ca(H2PO4)2. The coatings were characterized by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), electron probe microanalysis (EPMA) and X-ray diffraction (XRD). The properties of the coatings are described in terms of morphology.

Journal Article↗

Self-consistent embedding theory for locally correlated configuration interaction wave functions in condensed matter.

We present new developments on a density-based embedding strategy for the electronic structure of localized feature in periodic, metallic systems [see T. Kluner et al., J. Chem. Phys. 116, 42 (2002), and references therein]. The total system is decomposed into an embedded cluster and a background, where the background density is regarded as fixed. Its effect on the embedded cluster is modeled as a one-electron potential derived from density functional theory. We first discuss details on the evaluation of the various contributions to the embedding potential and provide a strategy to incorporate the use of ultrasoft pseudopotentials in a consistent fashion. The embedding potential is obtained self-consistently with respect to both the total and embedded cluster densities in the embedding region, within the framework of a frozen background density. A strategy for accomplishing this self-consistency in a numerically stable manner is presented. Finally, we demonstrate how dynamical correlation effects can be treated within this embedding framework via the multireference singles and doubles configuration interaction method. Two applications of the embedding theory are presented. The first example considers a Cu dimer embedded in the (111) surface of Cu, where we explore the effects of different models for the kinetic energy potential. We find that the embedded Cu density is reasonably well-described using simple models for the kinetic energy. The second, more challenging example involves the adsorption of Co on the (111) surface of Cu, which has been probed experimentally with scanning tunneling microscopy [H. C. Manoharan et al., Nature (London) 403, 512 (2000)]. In contrast to Kohn-Sham density functional theory, our embedding approach predicts the correct spin-compensated ground state.

Journal Article↗