Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “SILICA”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31Linked to original sources
PubMed2005

Direct and indirect monitoring of peptide-silica interactions using time-resolved fluorescence anisotropy.

The present work extends the application of time-resolved fluorescence anisotropy (TRFA) of a cationic probe rhodamine 6G (R6G) in aqueous Ludox to in situ monitoring of peptide adsorption onto the silica particles. Steady-state anisotropy and TRFA of R6G in Ludox sols were measured to characterize the extent of the ionic binding of the probe to silica particles in the presence of varying levels of tripeptides of varying charge, including Lys-Trp-Lys (KWK), N-acetylated Lys-Trp-Lys (Ac-KWK), Glu-Trp-Glu (EWE), and N-acetylated Glu-Trp-Glu (Ac-EWE). The results were compared to those obtained by direct observation of peptide adsorption using the steady-state anisotropy of the intrinsic tryptophan residue. Ionic binding of the peptides to Ludox particles produced an increase in the steady-state Trp anisotropy that was dependent on the number of cationic groups present, but the limiting anisotropy values were relatively low, indicating significant rotational freedom of the indole residue in the adsorbed peptides. On the other hand, R6G showed significant decreases in anisotropy in the presence of cationic peptides, consistent with the cationic peptides blocking the adsorption of the dye to the silica surface. Thus, R6G is able to indirectly report on the binding of peptides to Ludox particles. It was noteworthy that, while there were similar trends in the data obtained from steady-state anisotropy and TRFA studies of R6G, the use of steady-state anisotropy to assess binding of peptides overestimated the degree of peptide adsorption relative to the value obtained by TRFA. The study shows that the competitive binding method can be used to assess the binding of various biologically relevant compounds onto silica surfaces and demonstrates the potential of TRFA for probing peptide-silica and protein-silica interactions.

Adsorption↗
PubMed2005

Infrared study of the interaction of charged silica particles with TiO2 particles containing adsorbed cationic and anionic polyelectrolytes.

Attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy was used to study the adsorption of charged silica particles onto TiO(2) particles coated with anionic sodium polyacrylate (NaPA) or cationic poly(diallyldimethylammonium) chloride (PDADMAC). To the best of our knowledge, this is the first time that IR spectroscopy has been used to study the interaction of a polymer layer on one particle with a second different particle. The results show that, once adsorbed on the TiO(2) particle, the PDADMAC or the NaPA does not transfer to the silica particles. In the case of NaPA coated TiO(2), positively charged silica particles deposit on the TiO(2) and this is accompanied by a change in the relative intensities of the bands due to COOH and COO(-) groups. From this change in band intensity, it is calculated that only approximately 6% of the COO(-) groups located in the loops and tails bind to the silica particle. This shows that the polymer bridges the two particles through an electrostatic interaction with the outer COO(-) groups. Similarly, in the case of the TiO(2) particles coated with PDADMAC, negatively charged silica deposits on the TiO(2) and this is accompanied by an increase in intensity of the symmetric bending mode of the (+)N(CH(3))(3) group. This change in band intensity arises from the binding of these cationic sites of the polymer to the negative surface sites on the silica.

Journal Article↗
PubMed2005

Size control of dendrimer-templated silica.

One of the most significant challenges facing the biomimetic synthesis of materials is achieving the requisite level of dimensional and spatial control. Typical reaction conditions for biomimetic silica synthesis allow for continued growth and ripening leading to the formation of larger nanospheres on the order of 200-600 nm in diameter. Herein, we have used polyamidoamine and polypropylenimine dendrimers as templates to expand the reaction conditions of biogenic silica production to produce a more robust synthesis leading to size-selective precipitation of silica nanospheres. Through the use of defined concentrations of phosphate buffer and main group metal chloride salts, we have shown that the biomimetic silica growth process is controlled by cationic neutralization of the anionic silica nanosphere surface. Neutralization minimizes electrostatic repulsions, allowing for agglomerization and continued growth of nanospheres. By controlling these concentrations, we can selectively produce silica nanospheres of desired dimensions between 30 and 300 nm without adversely affecting the template's activity.

Chemical Precipitation↗
PubMed2005

Chemical functionalization of silica and alumina particles for dispersion in carbon dioxide.

The steric stabilization and flocculation of modified silica and alumina particle suspensions in condensed CO(2) were studied. Silica particles (average diameters of 7 and 12 nm) were functionalized using chlorosilanes of the form C(n)F(2n+1)CH(2)CH(2)Si(CH(3))(2)Cl (n = 8, 4, or 1) to give C(n)F(2n+1)-silica. Alumina particles (diameter of 8-14 nm) were grafted with C(8)F(17)CH(2)CH(2)Si(OEt)(3) and chemically modified with perfluorononanoic acid to yield C(8)F(17)-alumina and C(8)F(17)COOH-alumina, respectively. Elemental analysis and thermogravimetric analysis on the derivatized particles were carried out, and surface coverage was calculated. The stabilization of these modified particles in condensed CO(2) was quantified using turbidimetry. Particle stability was found to increase with increasing fluorinated tail length, temperature, and CO(2) density. Unmodified particles and those modified with only -CF(3) tails were unstable in condensed CO(2). Stabilization in supercritical CO(2) is continuous up to 24 h for the C(n)F(2n+1)-silica (n >/= 4) particles and 96 h for the C(8)F(17)-alumina particles. The C(8)F(17)COOH-alumina particles gave a significantly higher graft density than the C(8)F(17)-alumina particles but are not as stable in CO(2). The C(8)F(17)-alumina particles were stable at lower CO(2) densities than the modified silica particles. This stability difference may be attributed to the precursor organosilanes being monofunctional (modified silica) versus trifunctional (modified alumina), producing different structures on the surface.

Journal Article↗
PubMed2005

Kinetic modeling of aldehyde adsorption rates on bare and aminopropylsilyl-modified silica gels by ultra-rapid-scanning fourier transform infrared spectrometry.

Enhancements of a model capable of precisely defining rates of adsorption in terms of a Langmuir isotherm and determined from infrared and pressure data collected in the millisecond time regime are described in detail. Rates of adsorption are determined for formaldehyde and acetaldehyde exposed to bare and aminopropylsilyl-derivatized silica gel. The model fits the collected data by varying the number of adsorption sites and the adsorption and desorption rate constants and determines the best fit based on the measured IR absorbance, partial pressure, exposure backpressure, number of adsorption sites, and time. The rate of adsorption onto irregular-shaped silica gel was faster than the rate onto the corresponding spherical silica gel. Formaldehyde was adsorbed more efficiently than acetaldehyde on APS silica gel than on bare silica gel, whereas acetaldehyde was adsorbed more efficiently than formaldehyde on underivatized silica, indicating the possibility that formaldehyde is adsorbed through the formation of a Schiff base.

Journal Article↗
PubMed2004

Influence of the pore structure of MCM-41 and SBA-15 silica fibers on atomic layer chemical vapor deposition of cobalt carbonyl.

Mesoporous high surface area MCM-41 and SBA-15 type silica materials with fibrous morphology were synthesized and used as support materials for the ALCVD (atomic layer chemical vapor deposition) preparation of Co/MCM-41 and Co/SBA-15 catalysts. Co/MCM-41 and Co/SBA-15 catalysts were prepared by deposition of Co2(CO)8 from the gas phase onto the surfaces of preheated support materials in a fluidized bed reactor. For both silica materials, two different kinds of preparation methods, direct deposition and a pulse deposition method, were used. Pure silica supports as well as supported cobalt catalysts were characterized by various spectroscopic (IR) and analytical (X-ray diffraction, Brunauer-Emmett-Teller, elemental analysis) methods. MCM-41 and SBA-15 fibers showed considerable ability to adsorb Co2(CO)8 from the gas phase. For MCM-41 and SBA-15 silicas, cobalt loadings of 13.7 and 12.1 wt % were obtained using the direct deposition method. The cobalt loadings increased to 23.0 and 20.7 wt % for MCM-41 and SBA-15 silicas, respectively, when the pulse deposition method was used. The reduction behavior of silica-supported cobalt catalysts was found to depend on the catalyst preparation method and on the mesoporous structure of the support material. Almost identical reduction properties of SBA-15-supported catalysts prepared by different deposition methods are explained by the structural properties of the mesoporous support and, in particular, by the chemical structure of the inner surfaces and walls of the mesopores. Pulse O2/H2 chemisorption experiments showed catalytically promising redox properties and surface stability of the prepared MCM-41- and SBA-15-supported cobalt catalysts.

Journal Article↗
PubMed2004

Optimization of dye-doped silica nanoparticles prepared using a reverse microemulsion method.

Fluorescent labeling based on silica nanoparticles facilitates unique applications in bioanalysis and bioseparation. Dye-doped silica nanoparticles have significant advantages over single-dye labeling in signal amplification, photostability and surface modification for various biological applications. We have studied the formation of tris(2,2'-bipyridyl)dichlororuthenium(II) (Ru(bpy)) dye-doped silica nanoparticles by ammonia-catalyzed hydrolysis of tetraethyl orthosilicate (TEOS) in water-in-oil microemulsion. The fluorescence spectra, particle size, and size distribution of Ru(bpy) dye-doped silica nanoparticles were examined as a function of reactant concentrations (TEOS and ammonium hydroxide), nature of surfactant molecules, and molar ratios of water to surfactant (R) and cosurfactant to surfactant (p). The particle size and fluorescence spectra were dependent upon the type of microemulsion system chosen. The particle size was found to decrease with an increase in concentration of ammonium hydroxide and increase in water to surfactant molar ratio (R) and cosurfactant to surfactant molar ratio (p). This optimization study of the preparation of dye-doped silica nanoparticles provides a fundamental knowledge of the synthesis and optical properties of Ru(bpy) dye-doped silica nanoparticles. With this information, these nanoparticles can be easily manipulated, with regard to particle size and size distribution, and bioconjugated as needed for bioanalysis and bioseparation applications.

Coloring Agents↗
PubMed2004

Fabrication of microarrays on fused silica plates using the laser-induced backside wet etching method.

A novel approach in the fabrication of microarrays of dye and protein on fused silica plates using the laser-induced backside wet etching (LIBWE) technique is described. The surface of fused silica plates was initially precoated using trimethoxysilane self-assembled monolayers (SAMs) and then etched using the LIBWE method to obtain the desired microstructures on the plate surface. Using this technique, the SAMs on the nonirradiated areas were able to survive the LIBWE process and were used as templates for the subsequent deposition of dye molecules or proteins via chemical bonding or physical adsorption. In the case of fused silica plates precoated with fluorinated SAMs, the LIBWE method is used to remove the SAMs to expose the etched silica surfaces, on which a thin layer of pyranine molecules can be site-selectively deposited using an aqueous solution of pyranine. In another application, an ethanol solution of rhodamine 6G was preferentially deposited onto the nonirradiated areas. In yet another application, bovine serum albumin was preferentially deposited onto the laser-irradiated areas; in this case, the fused silica plates were precoated with poly(ethylene oxide) SAMs. Interestingly, when an aqueous suspension of polystyrene (PS) microbeads was cast onto the fused silica precoated with the fluorinated SAMs, hexagonally close-packed PS microbeads were deposited into the etched cavities. Depositions of the dye, protein, and microbeads were confirmed by visualization using a fluorescence microscope and scanning electron microscope.

Journal Article↗
PubMed2004

Adsorption of cationic cellulose derivative/anionic surfactant complexes onto solid surfaces. II. Hydrophobized silica surfaces.

The effect of the anionic surfactant SDS (sodium dodecyl sulfate) on the adsorption behavior of cationic hydroxyethyl cellulose (Polymer JR-400) and hydrophobically modified cationic cellulose (Quatrisoft LM-200) at hydrophobized silica has been investigated by null ellipsometry and compared with the previous data for adsorption onto hydrophilic silica surfaces. The adsorbed amount of LM-200 is found to be considerably larger than the adsorbed amount of JR-400 at both surfaces. Both polymers had higher affinity toward hydrophobized silica than to silica. The effect of SDS on polymer adsorption was studied under two different conditions: adsorption of polymer/SDS complexes from premixed solutions and addition of SDS to preadsorbed polymer layers. Association of the surfactant to the polymer seems to control the interfacial behavior, which depends on the surfactant concentration. For the JR-400/SDS complex, the adsorbed amount on hydrophobized silica started to increase progressively from much lower SDS concentrations, while the adsorbed amount on silica increased sharply only slightly below the phase separation region. For the LM-200/SDS complex, the adsorbed amounts increased progressively from very low SDS concentrations at both surfaces, and no large difference in the adsorption behavior was observed between two surfaces below the phase separation region. The complex desorbed from the surface at high SDS concentrations above the critical micelle concentration. The reversibility of the adsorption of polymer/SDS complexes upon rinsing was also investigated. When the premixed polymer/SDS solutions at high SDS concentrations (>5 mM) were diluted by adding water, the adsorbed amount increased due to the precipitation of the complex. The effect of the rinsing process on the adsorbed layer was determined by the hydrophobicity of the polymer and the surface.

Adsorption↗
PubMed2005

Stöber synthesis of monodispersed luminescent silica nanoparticles for bioanalytical assays.

We have developed a simple method to prepare bright and photostable luminescent silica nanoparticles of different sizes and narrow size distribution in high yield. The method is based on the use of Stöber synthesis in the presence of a fluorophore to form bright silica nanoparticles. Unlike micro-emulsion-based methods often used to prepare luminescent silica particles, the Stöber method is a one-pot synthesis that is carried out at room temperature under alkaline conditions in ethanol:water mixtures and avoids the use of potentially toxic organic solvents and surfactants. Our luminescent particles contained the transition metal complex tris(1,10-phenanthroline) ruthenium(II) chloride, [Ru(phen)3]Cl2. They showed higher photostability and a longer fluorescence lifetime compared to free Ru(phen)3 solutions. Leakage of dye molecules from the silica particles was negligible, which was attributed to strong electrostatic attractions between the positively charged ruthenium complex and the negatively charged silica. To demonstrate the utility of the highly luminescent silica nanoparticles in bioassays, we further modified their surface with streptavidin and demonstrated their binding to biotinylated glass slides. The study showed that digital counting of the luminescent nanoparticles could be used as an attractive alternative to detection techniques involving analogue luminescence detection in bioanalytical assays.

Luminescence↗
PubMed2005

Layered polyelectrolyte-silica coating for nanocapsules.

This paper demonstrates the ability to grow silica directly on a deposited surface of polyelectrolyte. Using this strategy, we describe the deposition of layered polyelectrolyte-silica coating on negatively charged surfaces of polystyrene particles and latex nanocapsules, which could not be coated directly with silica alone. By etching away the underlying polystyrene bead, we were able to form polyelectrolyte-silica capsules that were mechanically robust. Using scanning and transmission electron microscopy, we imaged and studied the coating after the deposition of each layer of polyelectrolyte and silica. We then applied this new coating to latex nanocapsules that were loaded with fluorescein molecules. We found that the coating procedure did not cause the loaded molecules to leak out from the capsules, and we determined that the variation in the number of loaded molecules among capsules arose from differences in the volume of the nanocavities and was not caused by the loading and coating of the capsules. This layered architecture permits the thickness of the coating to be controlled in principle over a wide dynamic range, but more importantly, this coating could act as an effective seal to prevent undesired leakage from nanocapsules and thus increase the long-term storability of loaded capsules. Over a 30-day period, we determined that leakage from uncoated capsules was significant but negligible for ones that were coated with two layers of polyelectrolyte-silica. Using single-pulse UV photolysis of individual nanocapsules, we demonstrate that the molecules contained within coated capsules could be released effectively and on demand with a single laser pulse.

Journal Article↗
PubMed2005

Functionalized mesoporous silica films as a matrix for anchoring electrochemically active guests.

Mesoporous silica thin films were shown to be an appropriate matrix for immobilization of discrete electroactive moieties, yielding uniform transparent thin film electrodes with defined texture and enhanced electrochemical activity. The mesoporous silica films prepared on conducting FTO-coated glass substrate were postsynthetically functionalized. Alkoxysilanes were used as precursors for subsequent grafting via ionic or covalent bonds of representative electroactive species, such as polyoxometalate PMo12O(40)3-, hexacyanoferrate(III), and ferrocene. The electrochemically active concentration within the silica-based composite electrodes achieves 90, 260, and 60 micromol cm(-3) for polyoxometalate, hexacyanoferrate(III), and ferrocene, respectively. The amount of molecules involved in the charge-transfer sequence is proportional to the film thickness and comparable to the total amount of embedded guests. Thus, eventually the whole bulk volume of the modified silica films is electrochemically accessible. Immobilization in the chemically modified silica matrix alters the redox potential of the electroactive molecules. Electron exchange between the adjacent redox centers (electron hopping) is proposed as a possible charge propagation pathway through the insulating silica matrix, which is supported by the fact that the high charge uptake is observed also for the hybrid electrodes with the covalently anchored redox guests.

Journal Article↗
PubMed2005

Synthesis of micrometer-sized silica-stabilized polystyrene latex particles.

Micrometer-sized silica-stabilized polystyrene latexes have been readily prepared by alcoholic dispersion polymerization using a 13 or 22 nm commercial alcoholic silica sol as the sole stabilizing agent. These resulting surfactant-free polystyrene particles have relatively narrow particle size distributions and contain surprisingly low levels of silica (</=1.1% by mass), as judged by disk centrifuge photosedimentometry and thermogravimetry, respectively. Transmission electron microscopy studies indicate that the silica sol is located exclusively at the surface of the polystyrene latex particles at submonolayer coverage. The polymerization of styrene in the absence of the silica sol leads to macroscopic precipitation of the polystyrene. Hence, the presence of silica sol is essential for the colloid stability of these latexes, which presumably involves a charge stabilization mechanism.

Letter↗
PubMed2006

Enhanced resonator sensitivity with nanostructured porous silica coatings.

We present a strategy to increase the sensitivity of resonators to the presence of specific molecules in the gas phase, measured by the change in resonant frequency as the partial pressure of the molecule changes. We used quartz crystals as the resonators and coated them with three different thin films (<1 microm thick) of porous silica: silica xerogel, silica templated by an ordered hexagonal phase of surfactant micelles, and silica templated by an isotropic L3 phase surfactant micellar system. We compared the sensitivity of coated resonators to the presence of water vapor. The crystals coated with hexagonal phase-templated silica displayed a sensitivity enhancement up to 100-fold compared to an uncoated quartz crystal in the low-pressure regime where adsorption played a dominant role. L3 phase-templated silica displayed the highest sensitivity (up to a 4000-fold increase) in the high partial pressure regimes where capillary condensation was the main accumulation mechanism. Three parameters differentiate the contributions of these coatings to the sensitivity of the underlying resonator: (i) specific surface area per unit mass of the coating, (ii) accessibility of the surfaces to a target molecule, and (iii) distribution in the characteristic radii of curvature of internal surfaces, as measured by capillary condensation.

Journal Article↗
PubMed2006

Fluorescent monodisperse silica ellipsoids for optical rotational diffusion studies.

We report on the preparation of monodisperse, fluorescent hematite-silica core-shell ellipsoids, with adjustable shapes ranging from spindles to nearly spheres, that are suitable for optical rotational diffusion studies. Hematite cores are grafted with poly(vinylpyrrolidone) which ensures colloidal stability during the silica coating provided by the base-catalyzed hydrolysis and polymerization of tetraethoxysilane. Using tetramethylammonium hydroxide as base instead of the volatile ammonia facilitates continuous seeded growth of silica to colloids with a desired aspect ratio. A convenient feature of the hematite-silica particles is the rapid dissolution of the iron oxide core by acid, producing hollow silica ellipsoids that can be optically matched to near transparency. The control of shape and size of the silica ellipsoids, their optical properties, and the fairly high yield in comparison to other preparation methods for nonspherical model colloids make the ellipsoids very suitable for quantitative studies. As a case in point, we have measured the rotational diffusion coefficient of fluorescent ellipsoids with rotational fluorescence recovery after photobleaching. Dye-labeled ellipsoids can be imaged with confocal microscopy.

Journal Article↗
PubMed2006

Synthesis and characterization of uniform alumina-mesoporous silica hybrid membranes.

The synthesis and characterization of alumina-mesoporous silica (alumina-MS) hybrid membranes are reported. The hybrids are formed using a variation of the evaporative-induced self-assembly (EISA) process reported by Hayward et al. (Langmuir 2004, 20, 5998) based on dip coating of an Anopore 200 nm membrane with a Brij-56/TEOS/HCl/H2O solution. Numerous analytical methods are used to probe both the hybrid material and the silica phase after dissolution of the Anopore substrate. Most importantly, He/N2 permeation measurements show that the effective pore size of the membrane can be tuned from 20 to 5 nm based on the number of dip-coating cycles used. The observed He/N2 permselectivity of 2.7 +/- 0.11 is nearly identical to the theoretical value obtained (2.65) assuming Knudsen diffusion dominates. The selectivity of these membranes is higher than that of most commercial "5 nm" membranes (2.29), which is ascribed to the lack of pinhole defects in the materials reported here. The hybrid membranes as well as the silica obtained after dissolution of the Anopore substrate have been characterized using scanning and transmission electron microscopy and X-ray diffraction. Those results indicate that the silica deposited in the Anopore membrane possesses uniform pores approximately 5 nm in size, consistent with the permeation studies. The current work presents an alternative approach to materials that possess many of the properties of mesoporous silica thin films (i.e., pores of controlled size and topology) without the difficulty of growing mesoporous silica thin films on porous supports.

Journal Article↗
PubMed2006

Surface modification of silica nanoparticles to reduce aggregation and nonspecific binding.

In this article, a systematic study of the design and development of surface-modification schemes for silica nanoparticles is presented. The nanoparticle surface design involves an optimum balance of the use of inert and active surface functional groups to achieve minimal nanoparticle aggregation and reduce nanoparticle nonspecific binding. Silica nanoparticles were prepared in a water-in-oil microemulsion and subsequently surface modified via cohydrolysis with tetraethyl orthosilicate (TEOS) and various organosilane reagents. Nanoparticles with different functional groups, including carboxylate, amine, amine/phosphonate, poly(ethylene glycol), octadecyl, and carboxylate/octadecyl groups, were produced. Aggregation studies using SEM, dynamic light scattering, and zeta potential analysis indicate that severe aggregation among amine-modified silica nanoparticles can be reduced by adding inert functional groups, such as methyl phosphonate, to the surface. To determine the effect of various surface-modification schemes on nanoparticle nonspecific binding, the interaction between functionalized silica nanoparticles and a DNA chip was also studied using confocal imaging/fluorescence microscopy. Dye-doped silica nanoparticles functionalized with octadecyl and carboxylate groups showed minimal nonspecific binding. Using these surface-modification schemes, fluorescent dye-doped silica nanoparticles can be more readily conjugated with biomolecules and used as highly fluorescent, sensitive, and reproducible labels in bioanalytical applications.

Coated Materials, Biocompatible↗
PubMed2006

Nanostructure and mechanical properties of polybutylacrylate filled with grafted silica particles.

We investigate the nanostructure and the linear rheological properties of polybutylacrylate (PBA) filled with Stöber silica particles grafted with PBA chains. The silica volume fractions range from 1.8 to 4.7%. The nanostructure of these suspensions is investigated by small-angle neutron scattering (SANS), and we determine their spectromechanical behavior in the linear region. SANS measurements performed on low volume fraction composites show that the grafted silica particles are spherical, slightly polydisperse, and do not form aggregates during the synthesis process. These composites thus constitute model filled polymers. The rheological results show that introducing grafted silica particles in a polymer matrix results in the appearance of a secondary process at low frequency: for the lowest volume fractions, we observe a secondary relaxation that we attribute to the diffusion of the particles in the polymeric matrix. By increasing the silica volume fraction up to a critical value, we obtain gellike behavior at low frequency as well as the appearance of a structure factor on the scattering intensity curves obtained by SANS. Further increasing the silica particle concentration leads to composites exhibiting solidlike low-frequency behavior and to an enhanced structure peak on the SANS diagrams. This quantitative correlation between the progressive appearance of a solidlike rheological behavior, on one hand, and a structure factor, on the other hand, supports the idea that the viscoelastic behavior of filled polymers is governed by the spatial organization of the fillers in the matrix.

Journal Article↗