Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “PRINTING”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31Linked to original sources

[Etiological aspects of occupational cancer in printing industry].

Research of oncology lethality from workplace exposures is one of the most effective approaches to studying the etiology of malignant neoplasms. However, certain problems of methodology compromise the informative value of such research whose purpose is to identify the carcinogens. Addition of data on morbidity and lethality in heterogeneous industrial categories, whose typical feature are inhomogeneous exposures, is a major methodological problem. The fact that the studied occupational populations are limited to male subjects is another important problem. The most adequate epidemiological study projects were analyzed and compared with the results of our own case study, which dealt, for the first time in the history of our country, with investigating the lethality causes of 1552 males and 3473 females occupied as compositors, printers and bookbinders at two major printing enterprises in the city of Moscow. According to the authors, an exposure to polycyclic aromatic hydrocarbons, e.g. benzopirin, could be a reliably higher risk of mortality of melanoma and of ovarian cancer among female press operators. With regard for experimental and epidemiological research, the authors believe it appropriate to put forward the below hypothesis: a many-year exposure to minimal quantities of asbestos contained in the paper dust was the key trigger inducing the malignant mesothelioma and ovarian cancer in bookbinders and printers.

Asbestos↗

Stability of expanded granular sludge bed process for terylene artificial silk printing and dyeing wastewater treatment.

Terylene artificial silk printing and dyeing wastewater (TPD wastewater), containing averaged 710 mg/L terephthalic acid(TA) as the main carbon source and the character pollutant, was subjected to expanded granular sludge bed (EGSB) process. The stability of the EGSB process was firstly conducted by laboratory experiment. TA ionization was the predominated factor influencing the acid-base balance of the system. High concentration of TA in wastewater resulted in sufficient buffering capacity to neutralize the volatile fatty acids (VFA) generated from substrate degradation and provided strong base for anaerobic system to resist the pH decrease below 6.5. VFA and UFA caused almost no inhibition on the anaerobic process and biogas production except that pH was below 6.35 and VFA was at its maximum value. Along with the granulating of the activated sludge, the efficiency of organic removal and production rate of biogas increased gradually and became more stable. After start-up, the efficiency of COD removal increased to 57%-64%, pH stabilized in a range of 7.99-8.04, and production rate of biogas was relatively high and stable. Sludge granulating, suitable influent of pH and loading were responsible for the EGSB stability. The variation of VFA concentration only resulted in neglectable rebound of pH, and the inhibition from VFA could be ignored in EGSB. The EGSB reactor was stable for TPD wastewater treatment.

Bacteria, Anaerobic↗

[Study on recovery of copper from waste printed wiring boards by electrostatic separation].

Recovery of Cu from waste printed wiring boards (PWBs) was studied by crushers and electrostatic separator. The results of pulverizing experiment show that liberation degree of metal is higher in grain size -0.9 + 0.074 mm, the product of this grain size can be used as raw material in electrostatic separation. The main factors that influence electrostatic separation are found by dynamic analysis of particles in course of electrostatic separation, it conclude electrode voltage, roller rotate speed, electric coronary polar distance and granularity of particles. The -0.9 + 0.074 mm pulverizing product is separated through single stage electrostatic separation after optimizing influence factors. Result shows that the enrichment condition of Cu in fine material is good, Cu could be concentrated from 32.0% to 63.6%, and recovery ratio is 78.7%.

Copper↗

Medical knowledge in Hebrew: manuscripts and early printed books.

This article presents a short survey of the Hebrew textual production on medical literature during the Middle Ages in the West. It explores diverse trends in the writing and diffusion of medical texts from the creation of the Hebrew medical corpus, as well as the fortuna that the transmission of this genre had after the introduction of printing.

History, Medieval↗

[From drawing and photograph to printed illustration; engravers, lithographers and printers in action for the Nederlandsch Tijdschrift voor Geneeskunde to 1920].

From 1857 to 1920 a number of engravers and lithographers supplied the Nederlandsch Tijdschrift voor Geneeskunde with illustrations. Two lithographers may be regarded as regular contributors to the Journal. They were A.J. Wendel of Leiden, who from 1859 to 1875 was active as house lithographer, and the Amsterdam lithographer C. Mooy from 1883 to 1910. The new techniques of mechanical reproduction of photographs in printing slowly but surely replaced the lithos and wood engravings.

Art↗

Illustrated print materials for health and family planning education.

Printed materials meant to convey health messages are apt to make a more striking and lasting impression on their audience if they are well illustrated. But coming up with good illustrations takes time, effort and care. The Program for Appropriate Technology in Health (PATH) has found that the best way of ensuring that illustrations will be understood and accepted is to develop them with the help of representatives of the target audience.

Books, Illustrated↗

A study on the health hazard of toluene in the polythene printing industry in Singapore.

A study was conducted to determine if there were any health effects among the polythene printers who were exposed to toluene and to evaluate the use of urinary hippuric acid in biological monitoring. The study covered 54 printers from 6 plants out of the universe population of 32 polythene printing plants who used toluene as ink dilutants. They were matched with 54 controls for age, sex, race and similar occupational status. All were interviewed and examined clinically. 23 patients were selected for neurobehavioural tests. 26% of the printers had more than 10 years of exposure to toluene. No case of clinical encephalopathy or peripheral neuropathy was detected. 38.9% of the printers had hand dermatitis compared with 1.9% among the controls. Results of the neurobehavioural tests for the 23 printers were not statistically different from the controls. The results of the liver function test were within normal limits. The mean toluene-in-air level was 246 +/- 25 mg/m. Mean blood toluene was 0.63 +/- 0.14 microgram/ml. The mean urinary hippuric acid was 2.83 +/- 0.48 mg/ml as compared to 0.35 +/- 0.08 mg/ml in the controls. Urine hippuric acid corrected to SG of 1.016 was well correlated to air toluene level (r = 0.81). Toluene appears not to have any significant nervous system or liver effects in these printers. Urinary hippuric acid is a useful indicator for biological monitoring of atmospheric exposure to toluene.

Adolescent↗

[Some considerations on the integration of the disabled with particular regard to the placement of dysmelic and spastic persons in the printing industry (author's transl)].

The systematic vocational resettlement of the disabled necessitates the preparation of working place related requirement profiles which have to be compared with the work specific performance profiles of disabled job seekers. The authors use the example of a multiply handicapped dysmelic person to discuss and explain the different aspects of such a methodical approach from the angle of the employment opportunities in the printing industry.

Activities of Daily Living↗

[Efficacy of the use of barrier creams in the prevention of dermatological diseases in textile dyeing and printing plant workers: results of a randomized trial].

A total of 942 workers of 13 dyeing and printing factories in the area of Como (N. Italy) were examined in order to detect skin complaints on the hands and forearms. Of these, 868 were eligible for and consented to participate in a controlled and randomized experiment aimed at assessing the efficacy of using barrier creams in practical circumstances. 657 workers underwent all three control examinations arranged over about one year. In the randomized group for treatment with barrier creams the cumulative incidence of objective skin lesions was significantly lower than in the group in which no particular recommendation of use was made (44.5% versus 54.4% positive for objective examination in at least one of the three control examinations after recruitment: 95% confidence limits of the difference between 2%-17% percentages; 39.9% versus 47.0% in subjects who were negative at the recruitment examination, 59.0% versus 76.8% in subjects who were positive at the recruitment examination). The use of a hydrocarbon cream was significantly more effective than using a silicone cream (95% confidence limits of the differences of cumulative incidences: -10.9% +20.7% comparing silicone creams with non-treatment; 2.8%-20.2% comparing hydrocarbon creams with non-treatment).

Adult↗

A capillary electrophoresis chip for the analysis of print and film photographic developing agents in commercial processing solutions using indirect fluorescence detection.

The separation and detection of both print and film developing agents (CD-3 and CD-4) in photographic processing solutions using chip-based capillary electrophoresis is presented. For simultaneous detection of both analytes under identical experimental conditions a buffer pH of 11.9 is used to partially ionise the analytes. Detection is made possible by indirect fluorescence, where the ions of the analytes displace the anionic fluorescing buffer ion to create negative peaks. Under optimal conditions, both analytes can be analyzed within 30 s. The limits of detection for CD-3 and CD-4 are 0.17 mM and 0.39 mM, respectively. The applicability of the method for the analysis of seasoned photographic processing developer solutions is also examined.

Buffers↗

Fiberglass dermatitis from printed circuit boards.

Seven cases of fiberglass dermatitis among production operators in the electronics industry are reported. This was due to the repeated daily handling of printed circuit boards (PRCBs). The predominant complaint of the workers was itch of the lateral aspects of the fingers and finger webs. In six workers, unroofed vesicles, pinhead areas of postinflammatory hyperpigmentation, and excoriation marks were noted at these sites. Skin stripping of the affected sites confirmed the presence of fiberglass spicules in all cases. The glass fibers had diameters of 11-16 microns. Patch testing of six of the workers with the European Standard series of allergens revealed no relevant work-related contact sensitizers. Microscopic examination of the free edges and scrapings from the PRCBs showed glass fibers of similar fiber length and diameter to those found in the workers' skin. Fiberglass can be used as a reinforcement filling material in some types of PRCBs. Free edges of such PRCBs have easily detached fiberglass spicules. Workers in frequent contact with these PRCBs can have a fiberglass-induced irritant dermatitis. Preventive measures could include the use of PRCBs with less free fiberglass at its edges, vacuuming of the newly cut boards, use of dusting powder, protective devices and emollients, and improved personal hygiene of the workers.

Adult↗

A biosensor for the detection of triazine and phenylurea herbicides designed using Photosystem II coupled to a screen-printed electrode.

A biosensor for the detection of triazine- and phenylurea-type herbicides was constructed using isolated Photosystem II (PS II) complexes as a biosensing element. PSII isolated from the thermophilic cyanobacterium Synechococcus elongatus was immobilized on the surface of a screen-printed sensor composed of a graphite working electrode and Ag/AgCl reference electrode deposited on a polymeric substrate. The biosensor was mounted in a flow microcell with illumination. The principle of the detection was based on the fact that herbicides selectively block PSII electron transport activity in a concentration-dependent manner. Changes of the activity were registered amperometrically as the rate of photoreduction of an artificial electron acceptor. The setup resulted in a reusable herbicide biosensor with a good stability (half-life of 24 h) and limit of detection of approximately 10(-9) M for diuron, atrazine and simazine.

Biosensing Techniques↗

Levitation and movement of human tumor cells using a printed circuit board device based on software-controlled dielectrophoresis.

In this study we describe an original, efficient, and innovative printed circuit board (PCB) device able to generate dielectrophoresis-based, software-controlled cages that can be moved to any place inside a microchamber. Depending on their dielectrophoretic properties, eukaryotic cells can be "entrapped" in cages and moved under software control. The main conclusion gathered from the experimental data reported is that the PCB device based on dielectrophoresis permits levitation and movement of different tumor cells at different dielectrophoresis conditions. The results presented herein are therefore the basis for experiments aimed at forced interactions or separation of eukaryotic cells using "lab-on-a-chip." In fact, because many cages can be controlled at the same time, and two or more cages can be forced to share the same or a different location, it is possible, in principle, either to bring in contact cells of a differing histotype or to separate them.

Animals↗

Development of a rapid, quantitative glucosyltransferase assay based on a screen-printed fructose enzyme electrode and application to optimization studies on gtfD expression in recombinant Escherichia coli.

A biosensor for fructose determination was used as basis of an assay for the determination of glucosyltransferase (GTF) activities and applied to monitoring recombinant enzyme production. GTFs catalyze the synthesis of glucans from sucrose leading to the release of fructose. Specific fructose determinations in the microM concentration range were achieved with a fructose electrode based on fructose dehydrogenase, which was immobilized on a screen-printed platinum electrode. This electrode was used as basis of the new assay for GTF activity determinations. Depending on the amount of enzyme, the assay was completed within 15-30 min compared to 1-2 h for the traditional photometric assay. From the amount of fructose released in a given reaction time, GTF activities were determined down to approx. 20 U/L. Even unpurified samples from a recombinant GTF-S production process could be analyzed without any problems, and a good correlation was obtained to data obtained from the photometric assay. Analysis of samples from cultures of various rGTF-S-producing recombinant E. coli strains grown on different media with SDS-PAGE and with the new assay identified the same strain and culture medium as optimum for recombinant GTF-S production.

Biosensing Techniques↗

Supramolecular microcontact printing and dip-pen nanolithography on molecular printboards.

The transfer of functional molecules onto self-assembled monolayers (SAMs) by means of soft and scanning-probe lithographic techniques-microcontact printing (muCP) and dip-pen nanolithography (DPN), respectively-and the stability of the molecular patterns during competitive rinsing conditions were examined. A series of guests with different valencies were transferred onto beta-cyclodextrin- (beta-CD-) terminated SAMs and onto reference hydroxy-terminated SAMs. Although physical contact was sufficient to generate patterns on both types of SAMs, only molecular patterns of multivalent guests transferred onto the beta-CD SAMs were stable under the rinsing conditions that caused the removal of the same guests from the reference SAMs. The formation of kinetically stable molecular patterns by supramolecular DPN with a lateral resolution of 60 nm exemplifies the use of beta-CD-terminated SAMs as molecular printboards for the selective immobilization of printboard-compatible guests on the nanometer scale through the use of specific, multivalent supramolecular interactions. Electroless deposition of copper on the printboard was shown to occur selectively on the areas patterned with dendrimer-stabilized gold nanoparticles.

Journal Article↗

Detection of polymerase chain reaction fragments using a conducting polymer-modified screen-printed electrode in a microfluidic device.

A simple and fast method for electrochemical detection of amplified fragments by PCR was successfully developed using CE in a microfluidic device with a modified screen-printed carbon electrode (SPCE). The surfaces of the SPCE were modified with poly-5,2'-5',2''-terthiophene-3'-carboxylic acid, which improves the analysis performance by lowering the detection potential, enhancing the S/N characteristics, and avoiding electrode poisoning. DNA fragments amplified by PCR were separated within 210 s in a 75.5 mm-long coated-separation channel at a separation field strength of -200 V/cm. To minimize the sample adsorption into the inner surface of the capillary wall, which disturbs the separation, a dynamically coated capillary with an acrylamide solution was used. Furthermore, the analysis procedure was simplified and rendered reproducible by using 0.50% w/v hydroxyethylcellulose as a separation matrix in a coated channel. The reproducibility of the analysis employing the coated channel yielded RSD of 4.3% for the peak areas and 1.4% for the migration times in eight repetitive measurements at a modified electrode, compared with 21.3 and 9.4% for a bare electrode. The sensitivity of the assay was 18.74 pAs/(pg/microL) with a detection limit of 584.31 +/- 1.3 fg/microL.

Drug Stability↗

Multi-turn, printed surface coil inductance, and Q optimization.

Wheeler's empirical inductance formula for a multi-turn, close-wound flat coil shows that the maximum inductance for a given length of wire occurs when the outer to inner radius ratios is equal to 15/7. A similar expression is proposed for a flat, printed spiral for surface coil antenna design by modifying one of the coefficients in Wheeler's formula. Measured inductance is in good agreement with this new formula and the optimum radius ratio for maximum inductance or Q is now of the order of 9/5.

Electric Conductivity↗

Quadrupole gradient coil design and optimization: a printed circuit board approach.

Three different dual-axis quadrupole gradient coils for quantitative high resolution MR imaging of small animals, phantoms and specimens were designed and built using printed circuit board technology. Numerical optimization of the conductor positions was used to increase the volume of 0.4% gradient uniformity by up to a factor of four. In one coil, the volume of 5% gradient uniformity occupied 88% and 83% of the overall diameter and length of the coil, respectively. A systematic error of 0.5% in the wire placement was shown to cause a reduction in the volume of 0.4% gradient uniformity by a factor of two, though the region of 5% gradient uniformity was not significantly affected. Heat transfer calculations were used to determine maximum peak and root-mean-squared currents that could safely be applied to the coils.

Copper↗