Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Disarticulation”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31Linked to original sources
PubMed1996

Morphological survey of the cervicothoracic junctional region.

STUDY DESIGN: Vertebral morphology of the cervicothoracic junctional region was studied using the C6 to T4 vertebrae from 51 disarticulated skeletons (26 males and 25 females). OBJECTIVES: Orientation of the facet joint pair relative to the plane of the superior endplate and the sagittal reference was recorded. A vertebral index was developed to compare the superior endplate surface area with the posterior vertebral body height. SUMMARY OF BACKGROUND DATA: Vertebral morphometry was recorded for comparison with the limited published data for this region. METHODS: The disc-facet angle was measured using a zygapophysial endplate protractor and the facet angle recorded from computer-aided digitizing of photographs of each segment. Vertebral dimensions were measured using Mitutoyo digital calipers. RESULTS: A marked change in disc-facet angle from C6 to T1 was recorded, with the incidence of right versus left asymmetry highest at the T1 level. The incidence of facet angle asymmetry greater than 10 degrees was 24% at C6, 18% at C7, and 16% at T1. The vertebral index indicated no significant gender difference. CONCLUSION: Consistent with other junctional regions of the spine, the cervicothoracic transition has significant morphological variations.

Anthropometry↗
PubMed1996

Projection of the S2 pedicle onto the posterolateral surface of the ilium. A technique for lag screw fixation of sacral fractures or sacroiliac joint dislocations.

STUDY DESIGN: This study analyzed the sacroiliac articulation at the level of the second sacral vertebra (S2). Anthropometric measurements were performed on 20 cadaveric pelves to determine the optimal starting point for lag screw fixation of the sacroiliac joint at S2. OBJECTIVES: The measurements were utilized to identify a region on the outer table of the posterior ilium which will provide a starting point for consistent safe placement of a lag screw across the sacroiliac joint into the ala of S2. SUMMARY OF BACKGROUND DATA: Previous studies have defined the optimal starting point on the outer table of the ilium for the projection of lag screws into the ala of S1. No data are available for lag screw fixation of the sacroiliac joint at S2. METHODS: Twenty human cadaveric pelves, disarticulated at the sacroiliac joint and fixed in a holding frame designed to maintain the sacrum and ilium in anatomic reduction, were utilized to identify a point on the outer table of the posterior ilium at which an interfragmentary screw could be inserted into the center of the pedicle of the second sacral vertebra. RESULTS: The starting point on the posterolateral ilium for screw insertion into the center of the S2 pedicle was found to exist 1.5 +/- 0.31 cm superior and 2.5 +/- 0.3 cm posterior to the apex of the greater sciatic notch only when the screw or guide pin was advanced at an angle perpendicular to the long axis of the sacrum. CONCLUSION: During lag screw fixation of posterior pelvic ring disruptions, aberrant screw placement may impose considerable risk to adjacent vascular, visceral, or neural structures. After anatomic reduction of the sacroiliac joint, safe and accurate screw fixation can be achieved by utilizing the starting point and insertion trajectory described in this paper.

Bone Screws↗
PubMed1997

Cervical pedicle screws versus lateral mass screws. Anatomic feasibility and biomechanical comparison.

STUDY DESIGN: Biomechanical comparison of the pull-out strengths of lateral mass and pedicle screws in the human cervical spine. Measurements of pedicle dimensions and orientation were compiled. OBJECTIVES: To determine if transpedicular screws provide greater pull-out resistance than lateral mass screws and to investigate the anatomic feasibility of pedicle screw insertion. SUMMARY OF BACKGROUND DATA: Cervical pedicle screws have been reported in limited clinical and biomechanical studies, and some quantitative cervical pedicle anatomy has been reported. No direct biomechanical comparisons have been made between lateral mass and pedicle screws. METHODS: Fifty-six fresh disarticulated human vertebrae (C2-C7) were evaluated with computed tomography to determine morphometry and vertebral body bone density. Lateral mass and pedicle screws were randomized to left versus right. A 3.5-mm cortical screw was used for both techniques, unless a pedicle was narrower than 5.0 mm; then a 2.7-mm cortical screw was used instead. Pedicle wall violations were recorded. Screws were subjected to a uniaxial load to failure. Mean pedicle height, width, and angle with respect to the vertebral midline were tabulated for each level. RESULTS: The mean load-to-failure was 677 N for the cervical pedicle screws and 355 N for the lateral mass screws. No significant correlations for either screw type were found between pull-out strength and bone density, screw length, or vertebral level. Pedicle and lateral mass dimensions were highly variable and not predictive of pull-out strength. Seven (13%) minor pedicle wall violations were observed. CONCLUSIONS: Cervical pedicle screws demonstrated a significantly higher resistance to pull-out forces than did lateral mass screws. The variability in pedicle morphometry and orientation requires careful preoperative assessment to determine the suitability of pedicle screw insertion.

Biomechanical Phenomena↗
PubMed1997

Morphometry of human lumbar apophyseal joints. A novel technique.

STUDY DESIGN: The anatomy of cadaveric lumbar apophyseal joints was examined as part of a study of possible correlations between lumbar apophyseal morphology, arthrosis, and cartilage thickness and stiffness. OBJECTIVES: To establish the morphometry of human upper lumbar apophyseal joints using an objective technique. SUMMARY OF BACKGROUND DATA: The apophyseal joints of 30 unfixed lumbar motion segments, all from different cadavers (24 male, five female, and one unknown, mean age 35 years, range 16-78 years) were exposed by dissection and disarticulation. Twenty-five motion segments were L1-L2, three were L2-L3, and two were L3-L4. The extent of fibrillation and linear dimensions of 29 of these specimens were examined, whereas the vertebrae and joints of 22 of them (18 being L1-L2) were cast in araldite resin. METHODS: The casts of the vertebrae were sectioned cephalocaudally at 1-mm intervals. Image processing of photographic slides of the sections established the orientations and dimensions of the lumbar apophyseal joints and their shapes using Fourier analysis. RESULTS: Apophyseal joint surface area was 158 +/- 43 mm2, cephalocaudal length 15.2 +/- 2.7 mm, and straight line length between anterior and posterior borders was 13.2 +/- 1.9 mm. The joints were orientated at 62.5 +/- 11.8 degrees to the coronal plane. Average maximum depth of concavity was 1.8 +/- 0.7 mm. The posterior edges of two joint pairs twisted inward toward the midsagittal plane in a cephalocaudal direction; thus, some apophyseal joints bear part of the axial spinal load. The right inferior surfaces were more elongated cephalocaudally (but not longer) than their contralateral partners. Inferior apophyses were significantly more elongated cephalocaudally (but not longer) than their ipsilateral articulating superior surfaces. CONCLUSIONS: In theory, Fourier analysis of joint surfaces was objective, but it dictated the criterion by which joints were grouped; care must be exercised so that measurement methods do not categorize joints artificially. "Symmetry" is too subjective to be applied to contralateral apophyseal joints; correlation coefficients should be quoted for areas and orientations. The morphology of contralateral lumbar apophyseal joint pairs was significantly correlated in all respects, as was the morphology of articulating lumbar apophyseal surfaces.

Adolescent↗
PubMed2000

Biomechanical evaluation of a new bone cement for use in vertebroplasty.

STUDY DESIGN: Comparative ex vivobiomechanical study. OBJECTIVES: To determine the strength and stiffness of osteoporotic vertebral bodies subjected to compression fractures and subsequently stabilized via bipedicular injection of one of two bone cements: one is a commercially available polymethylmethacrylate (Simplex P) and one is a proprietary glass-ceramic-reinforced BisGMA/BisEMA/TEGDMA matrix composite that is being developed for use in vertebroplasty (Orthocomp). SUMMARY OF BACKGROUND DATA: Osteoporotic compression fractures present diagnostic and therapeutic challenges for the clinician. Vertebroplasty, a new technique for treating such fractures, stabilizes vertebral bodies by injection of cement. Little is known, however, about the biomechanics of this treatment. METHODS: Five vertebral bodies (L1-L5) from each of four fresh spines were harvested from female cadavers (age, 80 +/- 5 years), screened for bone density using DEXA (t = -3.4 to -6.4), disarticulated, and compressed in a materials testing machine to determine initial strength and stiffness. The fractures then were repaired using a transpedicular injection of either Orthocomp or Simplex P and recrushed. RESULTS: For both cement treatments, vertebral body strength after injection of cement was significantly greater than initial strength values. Vertebral bodies augmented with Orthocomp recovered their initial stiffness; however, vertebral bodies augmented with Simplex P were significantly less stiff than they were in their initial condition. CONCLUSIONS: Augmentation with Orthocomp results in similar or greater mechanical properties compared with Simplex P, but these biomechanical results have yet to be substantiated in clinical studies.

Aged↗
PubMed2000

Cervical spine pedicle screws: a biomechanical comparison of two insertion techniques.

STUDY DESIGN: Biomechanical testing of the pullout strengths of pedicle screws placed by two different techniques in adult human cadaveric cervical spines. OBJECTIVES: To determine whether there is a significant difference in screw purchase of two commonly proposed methods of cervical pedicle screw insertion. SUMMARY OF BACKGROUND DATA: Wiring techniques remain the gold standard for posterior cervical fixation. However, absent or deficient posterior elements may dictate the use of alternative fixation techniques. Cervical pedicle screws have been shown to have significantly higher pullout strength than lateral mass screws. METHODS: Fifty fresh disarticulated human vertebrae (C3-C7) were evaluated with computed tomography for anatomic disease and pedicle morphometry. The right and left pedicles were randomly assigned to either a standard method or the Abumi insertion method. In the latter technique the cortex and cancellous bone of lateral mass are removed with a high-speed burr, which provides a direct view of the pedicle introitus. The pedicle is then probed and tapped and a 3.5-mm cortical screw inserted. Each screw was subjected to a uniaxial load to failure. RESULTS: There was no significant difference in the mean pullout resistance between the Abumi (696 N) and standard (636.5 N) insertion techniques (P = 0.41). There was no difference in pullout resistance between vertebral levels or within vertebral levels. Two (4%) minor pedicle wall violations were observed. CONCLUSION: In selected circumstances pedicle screw instrumentation of the cervical spine may be used to manage complex deformities and patterns of instability. Surgeons need not be concerned about reduced screw purchase when deciding between the Abumi method and its alternatives.

Aged↗
PubMed2001

An ex vivo biomechanical evaluation of a hydroxyapatite cement for use with vertebroplasty.

STUDY DESIGN: Comparative ex vivo biomechanical study. OBJECTIVE: To determine the strength and stiffness of osteoporotic vertebral bodies subjected to compression fractures and stabilized via bipedicular injections of the following: 1) Simplex P (Stryker-Howmedica-Osteonics, Rutherford, NJ), 2) Simplex P formulated consistent with the practice of vertebroplasty (F2), or 3) BoneSource (Stryker-Howmedica-Osteonics). SUMMARY OF BACKGROUND DATA: Little is known about the mechanical stabilization afforded by new materials proposed for use with vertebroplasty. METHODS: Vertebral bodies (T8-T10 and L2-L4) from each of 10 fresh spines were harvested from female cadavers (81 +/- 12 years), screened for bone density (t score, -3.8 +/- 1.1; bone mineral density, 0.75 +/- 15 g/cm2), disarticulated, and compressed to determine initial strength and stiffness. The fractured vertebral bodies were stabilized via bipedicular injections of 4 mL (thoracic) or 6 mL (lumbar) and then recrushed. RESULTS: Vertebral bodies repaired with Simplex P resulted in significantly greater strength (P < 0.05) relative to their prefracture states, those repaired with BoneSource resulted in the restoration of initial strength for both the thoracic and lumbar level, and those repaired with F2 resulted in significantly greater strength (P < 0.05) in the thoracic region and restoration of strength in the lumbar region. All cement treatments resulted in significantly less stiffness compared with initial values. CONCLUSIONS: All three materials tested restored or increased vertebral body strength, but none restored stiffness. Both new materials show promise for use in percutaneous vertebroplasty, but they need clinical evaluation.

Aged↗
PubMed1991

Nursing science: basic, applied, or practical? Implications for the art of nursing.

Nursing has long been described as both a science and an art. If the science of nursing is to be relevant to the art of nursing, then it must be conceptualized and pursued such that these two central components of nursing remain connected. Current conceptualizations of nursing science are examined in terms of the consequences that each conceptualization might have for the art of nursing. Pursuing nursing science as a basic science or an applied science disarticulates the science of nursing and the art of nursing. The author concludes that only if nursing science is conceptualized and pursued as a practical science will the science of nursing be consistently relevant to the art of nursing.

Humans↗
PubMed1991

Intra-arterial cisplatin given prior to surgery in osteosarcoma: grade of necrosis and size of tumor as major prognostic factors.

From January 1983 to August 1987, 29 evaluable patients with high-grade osteosarcoma were treated in our institution with preoperative intra-atrial cisplatin, 100 mg/m2 every 14 days for three courses. Surgery was done on day 42. Surgery consisted of limb salvage in six, amputations in 15, and disarticulations in eight. Postoperative chemotherapy included Adriamycin (ADR), 45 mg/m2 for 2 days every 6 weeks, alternated with cisplatin 120 mg/m2 every 6 weeks. The nephrotoxicity (18 out 29) was reversible in all cases. Cardiotoxicity was prominent; it was observed in 31% of patients. In six, there was congestive heart failure, but there were no fatal cases. The hematological toxicity was severe. There were three patients with fatal infections who had no evidence of disease after they had finished treatment. Seventeen of 29 patients (58.6%) were good responders and showed 60-100% tumoral necrosis after intra-atrial cisplatin. The 6-year, relapse-free survival rate was 58.6%--70.5% for the good responders and 41.6% for the poor responders (p less than 0.05). The size of the tumor was the other important prognostic factor. The rate of 6-year, relapse-free survival was 73.6% for small tumors (those measuring less than 100 cm2) and 33.3% for large tumors (p less than 0.05).

Adolescent↗
PubMed2003

Role of soft tissues in metacarpal fracture fixation.

The contribution of soft tissues in stabilizing fracture fixation in metacarpals is appreciated clinically, but no quantitative biomechanical study of their role has been done. All previous studies of fracture fixation in vitro have been done on metacarpals denuded of soft tissues. To quantify the role of soft tissues in metacarpal fracture fixation, the biomechanical effectiveness of four fixation devices was examined in human cadaver metacarpals with and without soft tissues. Values were compared for three nonrigid methods (expandable intramedullary fixation devices, crossed Kirschner wires, and single half-pin frames) and one rigid method (dorsal plates) in 45 disarticulated metacarpals stripped of soft tissues (denuded) and in 46 metacarpals in whole hands with all soft tissues remaining (intact). Mechanical testing to complete failure in three-point apex dorsal bending was done in all specimens. Ultimate moment (strength) of each of the four fixation methods was significantly greater in intact specimens than in denuded specimens. Crossed Kirschner wires were most stable in intact specimens, and dorsal plates were more stable in denuded specimens. The results show that soft tissues contribute to the strength of fracture fixation. Clinically, surgeons may be able to use a less invasive fixation method than plating without compromising the strength of metacarpal fixation in patients whose soft tissues are not severely disrupted and the fracture configuration allows. Plating may offer optimum stability in patients whose soft tissues are damaged severely and provide less strengthening of the fracture construct.

Biomechanical Phenomena↗
PubMed2005

CASE REPORTS: malignant fibrous histiocytoma of bone arising in chronic osteomyelitis.

This case report shows the importance of frozen section and/or permanent section pathology for diagnosis of tumorous conditions in patients with chronic osteomyelitis. According to published reports, a coincidence of malignant fibrous histiocytoma of bone and post-fracture osteomyelitis has occurred in only four patients. Our report details the treatment of 51-year-old man with a fracture 15 years previously and subsequent chronic osteomyelitis of the left distal femur. The original treatment was open reduction and casting. Fifteen years after the injury, the patient presented to the emergency room with increasing pain, erythema, swelling, and increased purulent discharge from the distal femur. Irrigation and debridement was done, but no frozen section or permanent pathology specimens were obtained. The left distal femur was radically resected for treatment of osteomyelitis. Histologic samples of the specimen revealed malignant fibrous histiocytoma of bone. A metastatic workup was negative. Subsequently, the left hip was disarticulated for wide resection of the tumor. One of two inguinal lymph nodes removed at that time was positive for malignant fibrous histiocytoma. The patient had additional chemotherapy. He was still alive 27 months after the operation.

Bone Neoplasms↗
PubMed2005

Biomechanical comparison of unipedicular versus bipedicular kyphoplasty.

STUDY DESIGN: A cadaveric study comparing the biomechanics of unipedicular versus bipedicular kyphoplasty in the treatment of osteoporotic vertebral compression fractures. OBJECTIVES: The objectives of this study were to compare unipedicular kyphoplasty to bipedicular kyphoplasty in restoring strength, stiffness, and height to osteoporotic vertebral compression fractures and to study the degree of unilateral wedging when using a unipedicular versus bipedicular approach to kyphoplasty. SUMMARY OF BACKGROUND DATA: Osteoporotic vertebral compression fractures are a common ailment of the elderly that can lead to chronic pain and deformity. Recently developed treatments known as vertebroplasty and kyphoplasty provide pain relief by percutaneously augmenting the fractured vertebral body with polymethyl methacrylate via a transpedicular approach. Vertebroplasty via a unipedicular approach has been shown to provide comparable restoration of vertebral body stiffness when compared to a bipedicular approach. The anticipated benefits of a unipedicular approach include reduction in patient risk, operative time, radiation exposure, and cost. No studies have evaluated the efficacy of unipedicular kyphoplasty. MATERIAL AND METHODS: Two fresh-frozen human cadaveric spines (T3-L5) were disarticulated, and the vertebral bodies (n = 30) were compressed using an Instron 8521 machine, recording load versus displacement. The fractured vertebral bodies then underwent kyphoplasty via either a unipedicular or bipedicular approach. The augmented vertebral bodies were then recompressed. The strength, stiffness, and height restoration of the groups were compared. Following recompression, the risk for lateral wedging was evaluated by comparing lateral height measurements. RESULTS: Following fracture and subsequent kyphoplasty augmentation, the mean strength of the bipedicular group was 1.40 kN (+/- 0.38) versus 1.57 kN (+/- 0.55) in the unipedicular group. Average stiffness in the bipedicular group was 0.4387 kN/mm (+/- 0.2095) compared to 0.6880 kN/mm (+/- 0.3179) in the unipedicular group. Postcompression vertebral body height was restored to 96% of prefracture height in the bipedicular group and 94% of prefracture height in the unipedicular group. The mean absolute value of the difference in height between right and left side of the vertebral bodies was 1.06 mm (+/- 1.01) in the bipedicular group, whereas the unipedicular group had a mean of 1.78 mm (+/- 1.84). Statistical analysis using 1-way analysis of variance revealed no significant difference in any of the outcome measurements between the unipedicular and bipedicular groups (P < 0.05). CONCLUSIONS: Unipedicular kyphoplasty is comparable to bipedicular kyphoplasty in the restoration of vertebral body strength, stiffness, and height in experimentally induced vertebral compression fractures. There was no greater risk for lateral wedging in the unipedicular group compared to the bipedicular group. Given the advantages of a unipedicular approach with respect to vertebral pedicle cannulation risk, operative time, radiation exposure, and cost, this study would support the use of a unipedicular approach to kyphoplasty in the treatment of vertebral compression fractures.

Aged, 80 and over↗
PubMed2006

The biomechanics of 1, 2, and 3 levels of vertebral augmentation with polymethylmethacrylate in multilevel spinal segments.

STUDY DESIGN: Experimental biomechanics of multilevel segments with 0, 1, 2, and 3 vertebral levels of polymethylmethacrylate augmentation. OBJECTIVE: To compare multilevel spinal segments with different numbers (0, 1, 2, and 3) of vertebral levels augmented with polymethylmethacrylate. SUMMARY OF BACKGROUND DATA: The stiffness and strength of single-level polymethylmethacrylate augmentations in individual and multilevel vertebrae treated by kyphoplasty and vertebroplasty have been studied, but the biomechanics of multilevel segments with more than 1 vertebral level augmented with polymethylmethacrylate are lacking, yet this is clinically relevant in multilevel compression fracture treatment. MATERIALS AND METHODS: A total of 48 multilevel segments (T3-T5, T6-T8, T9-T11, T12-L2, and L3-L5) from 12 spines with known bone mineral density (BMD) were allocated into 6 groups based on the number of vertebral levels augmented: 0 levels (n = 13), control group; 1 level (n = 7), group 2; 2 levels, groups 3, 4, and 5 (n = 7 in each); and 3 levels (n = 7), group 6. They were compressed to failure, disarticulated into individual vertebrae, and retested. Stiffness and strength were statistically analyzed using a univariate analysis of variance comparing the main effects, using least significant difference comparisons with 0.05 probability level. RESULTS: Strength was dependent on BMD (P < 0.001 multilevel segments, P < 0.001 individual vertebrae), with no differences among the 6 different augmentation groups, and no significant differences between augmented and nonaugmented individual vertebrae. Stiffness was dependent on BMD (P = 0.009 multilevel segments, P < 0.004 individual vertebrae), with no significant differences among the 6 different augmentation groups, and no significant differences between augmented and nonaugmented individual vertebrae. CONCLUSIONS: Multilevel segment biomechanics are dependent on BMD and not the pattern of augmentation, so the augmentation of fractured vertebrae can be extended to adjacent levels at risk for fracture to maintain stiffness and strength, thus preventing further fractures.

Aged↗
PubMed2005

Ulcerated rhabdomyosarcoma as portal of entry for tetanus in a previously nonimmunized child.

Infectious diseases represent one of the most important secondary problems related to the treatment of childhood cancer, being the leading cause of death in this population. They are predominantly of bacterial and fungal etiology. The association between tetanus, a bacterial vaccine-preventable disease, and cancer is virtually undescribed. The authors present the case of a previously nonimmunized child, due to his parents' choice, who developed severe tetanus with an ulcerated rhabdomyosarcoma as portal of entry. Due to an unfavorable evolution, the child underwent a hip disarticulation to provide tetanus control. The ulterior tumor management was successful: the child has been off therapy for more than 108 months with no evidence of disease.

Antineoplastic Combined Chemotherapy Protocols↗
PubMed1984

Osseous destruction by neurofibroma diagnosed in infancy as "desmoplastic fibroma".

A 2-month-old male infant presented with a lytic lesion of the distal radius which was diagnosed as desmoplastic fibroma. Tumor recurred following en bloc resection of the distal radius and forearm, necessitating an elbow disarticulation. Subsequently, the child developed multiple café-au-lait spots, and histologic sections have been reinterpreted as neurofibromatosis. This case illustrates the potential difficulty in diagnosing neurofibromatosis when few or no classic stigmata of the disease are present.

Adult↗
PubMedDate not supplied

Stump overgrowth in juvenile amputees.

Stump overgrowth requiring surgical revisions occurred in 58 of 1,015 (5.7%) skeletally immature patients with congenital and acquired amputations. Acquired below-knee amputation was the most common type needing revision (18.5%), and the congenital group not requiring a conversion had the least overgrowth problem (1.7%). When the primary amputation occurred after the age of 12 years or when disarticulation was carried out, revisions were unnecessary. The younger the patient, the greater the incidence of repeated revisions. Study of the histological changes in eight juvenile congenital and acquired amputees revealed two patterns: reactive connective tissue stratification and a bursa.

Adolescent↗
PubMedDate not supplied

Clubfeet and tarsal coalition.

Tarsal coalition was noted in 18 cases of rigid equinovarus deformity. Sixteen cases were encountered at surgery and two at morbid dissection. There were 14 patients in the series; six had associated pathologic conditions that might have caused their clubfeet to be deemed "teratologic," whereas eight did not and were considered to have congenital clubfeet. Four patients in the series had bilateral coalitions. Preoperative radiographs demonstrated the coalition in only one case. A presurgical magnetic resonance image (MRI) clearly showed the coalition in another case. Nonoperative treatment was unsuccessful. Two patients with tibial dysplasia had ankle disarticulations. The remaining 16 feet required extensive soft-tissue releases, internal fixation, and coalition excision. The vast majority of cases showed cartilaginous subtalar coalition at the medial facet. The patients were followed for an average of 6 years, and two recurrences were noted. Remaining feet were painless and plantargrade, but were rather stiff. This anomaly may be more common than previously described. It is usually not suspected preoperatively and may likewise be difficult to recognize at surgery. A preoperative MRI scan may also be helpful.

Amputation, Surgical↗
PubMed2007

Clinical outcome of osteosarcoma with primary total femoral resection.

Primary total femoral resection and reconstruction rarely are indicated for patients with osteosarcoma. We determined the survivorship, complications, and functional outcome of patients with osteosarcomas who had total femoral resections. We evaluated 13 patients with osteosarcomas whose surgical conditions included multiple skip lesions along the femur (Group I, two patients), extensive femoral involvement without interruption (Group II, eight patients), and iatrogenic contamination of the femur secondary to an internal fixation (Group III, three patients). We analyzed the event-free survival, complications, and functional outcome and looked for obvious differences among the three groups. The minimum followup was 9 months (mean, 41 months; range, 9-125 months). The Kaplan-Meier event-free survival rate at 10 years was 34.6% (95% confidence interval, 7.5%-61.7%). All five patients in Groups I and III died. Four of eight patients in Group II were event-free survivors. Four patients had major complications. Five patients had good functional scores. The subset of patients who had relatively small tumors with wide resection margins had a good prognosis. In patients with other clinical conditions, hip disarticulation can be considered.

Adolescent↗