Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “SILICA”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30Linked to original sources
PubMed1999

Development of sensors for direct detection of organophosphates. Part I: Immobilization, characterization and stabilization of acetylcholinesterase and organophosphate hydrolase on silica supports.

Biosensors for organophosphates in solution may be constructed by monitoring the activity of acetylcholinesterase (AChE) or organophosphate hydrolase (OPH) immobilized to a variety of microsensor platforms. The area available for enzyme immobilization is small (< 1 mm2) for microsensors. In order to construct microsensors with increased surface area for enzyme immobilization, we used a sol-gel process to create highly porous and stable silica matrices. Surface porosity of sol-gel coated surfaces was characterized using scanning electron microscopy; pore structure was found to be very similar to that of commercially available porous silica supports. Based upon this analysis, porous and non-porous silica beads were used as model substrates of sol-gel coated and uncoated sensor surfaces. Two different covalent chemistries were used to immobilize AChE and OPH to these porous and non-porous silica beads. The first chemistry used amine-silanization of silica followed by enzyme attachment using the homobifunctional linker glutaraldehyde. The second chemistry used sulfhydryl-silanization followed by enzyme attachment using the heterobifunctional linker N-gamma-maleimidobutyryloxy succinimide ester (GMBS). Surfaces were characterized in terms of total enzyme immobilized, total and specific enzyme activity, and long term stability of enzyme activity. Amine derivitization followed by glutaraldehyde linking yielded supports with greater amounts of immobilized enzyme and activity. Use of porous supports not only yielded greater amounts of immobilized enzyme and activity, but also significantly improved long term stability of enzyme activity. Enzyme was also immobilized to sol-gel coated glass slides. The mass of immobilized enzyme increased linearly with thickness of coating. However, immobilized enzyme activity saturated at a porous silica thickness of approximately 800 nm.

Acetylcholinesterase↗
PubMed2002

In situ raman spectroscopy studies of metal ion complexation by 8-hydroxyquinoline covalently bound to silica surfaces.

Raman spectroscopy is applied to an investigation of the interfacial chemistry of silica-immobilized 8-hydroxyquinoline (8HQ) for binding of metal ions over a wide range of solution conditions. Since the derivatized silica has a high specific binding capacity, the mass of silica equilibrated with solution needs to be small for studies of reactions with trace-level (microM) metal ions; otherwise, the solution volume required to reach equilibrium becomes excessive. To address this problem, a small-volume flow cell is designed for this work using a fiber-optic Raman probe inserted directly into the packed end of a microcolumn, allowing excitation and collection of Raman scattering from less than 10 mg of derivatized silica. This cell is attached to a flow system that allows control of solution conditions while the response of the 8HQ-silica material is acquired by continuous monitoring of Raman scattering from the sample. Raman spectra of the deprotonated, neutral, protonated, and copper-complexed forms of the ligand can be distinguished, allowing proton-transfer and metal ion binding reactions of the ligand to be investigated. To account for the effects of changing surface potential on these reactions, zeta-potential measurements are made on the 8HQ-silica particles under the same solution conditions that are employed in the Raman scattering measurements. The observed pH dependence of metal ion binding was corrected for the effect of surface potential using the Boltzmann equation, and the resulting equilibrium constant for binding of Cu2+ was independent of metal ion concentration over a 100-fold range from 30 microM to 5 mM.

Journal Article↗
PubMed2004

Simple and comprehensive two-dimensional reversed-phase HPLC using monolithic silica columns.

Simple and comprehensive two-dimensional (2D)-HPLC was studied in a reversed-phase mode using monolithic silica columns for second-dimension (2nd-D) separation. Every fraction from the first column, 15 cm long (4.6-mm i.d.), packed with fluoroalkylsilyl-bonded (FR) silica particles, was subjected to the separation in the 2nd-D using one or two octadecylsilylated (C(18)) monolithic silica columns (4.6-mm i.d., 3 cm). Monolithic silica columns in the 2nd-D were eluted at a flow rate of up to 10 mL/min with separation time of 30 s that meets the fractionation every 15-30 s at the first dimension (1st-D) operated at a flow rate of 0.4-0.8 mL/min. Three cases were studied. (1) In the simplest scheme of 2D-HPLC, effluent of the 1st-D was directly loaded into an injector loop of 2nd-D HPLC for 28 s, and 2 s was allowed for injection. (2) Two six-port valves each having a sample loop were used to hold the effluent of the 1st-D alternately for 30 s for one 2nd-D column to effect comprehensive 2D-HPLC without the loss of 1st-D effluent. (3) Two monolithic silica columns were used for 2nd-D by using a switching valve and two sets of 2nd-D chromatographs separating each fraction of the 1st-D effluent with the two 2nd-D columns alternately. In this case, two columns of the same stationary phase (C(18)) or different phases, C(18) and (pentabromobenzyloxy)propylsilyl-bonded (PBB), could be employed at the 2nd-D, although the latter needed two complementary runs. The systems produced peak capacity of approximately 1000 in approximately 60 min in cases 1 and 2 and in approximately 30 min in case 3. The three stationary phases, FR, C(18), and PBB, showed widely different selectivity from each other, making 2D separations possible. The simple and comprehensive 2D-HPLC utilizes the stability and high efficiency at high linear velocities of monolithic silica columns.

Journal Article↗
PubMed2005

Phosphorescence quenching of dyes adsorbed to silica thin-layer chromatography plates.

We describe photoluminescence (PL) quenching experiments by oxygen for a series of transition metal dyes adsorbed to commercial silica thin-layer chromatography plates. These TLC plates have been used by others as rapidly responding PL pressure sensors. The quenching kinetics show interesting differences from the behavior of the same dyes adsorbed to the more well-defined surfaces of SBA-15 mesoporous silica particles adsorbed to a thin layer-by-layer polymer film as reported in Chem. Mater. 2005, 17, 3160. The pore size and the pore size distribution are much larger for the TLC silica than for the mesoporous silica. On the TLC silica, the dye PL decay profiles show smaller deviations from an exponential form. One sees larger differences between the intensity and lifetime Stern-Volmer plots, and most surprisingly, the dyes on the surface of the TLC silica are about three times more sensitive to quenching by oxygen.

Journal Article↗
PubMed2006

Gold and silica-coated gold nanoparticles as thermographic labels for DNA detection.

The infrared emissivity of Au and silica-coated Au nanoparticles (Au NPs) deposited on indium tin oxide substrates was investigated. NPs were irradiated with laser light at a frequency close to the Au plasmon resonance band, and the blackbody radiation emitted as a result was monitored with an IR camera equipped with an InAs array detector. The differences in temperature before and after laser irradiation were recorded (T-jumps) and were found to be directly proportional to the number of particles present on the slide and to the laser power used in the experiment. Coating Au NPs with silica increased the measured T-jumps 2-5 times, depending on the thickness of the silica shell. This was in agreement with the observation that silica has a much higher IR emissivity than Au. Both Au and silica-coated Au NPs were then tested as labels for thermographic DNA detection. Target DNA concentrations as low as 100 pM were recorded when Au NPs were used as labels and as low as 10 pM when silica-coated Au NPs were used.

DNA↗
PubMed2006

Performance of monolithic silica capillary columns with increased phase ratios and small-sized domains.

Monolithic silica capillary columns for HPLC were prepared from tetramethoxysilane to have smaller sized domains and increased phase ratios as compared to previous materials, and their performance was evaluated. The monolithic silica columns possessed an external porosity of 0.65-0.76 and a total porosity of 0.92-0.95 and showed considerably higher performance and greater retention factors in a reversed-phase mode after chemical modification than columns previously reported. An octadecylsilylated monolithic silica column with the smallest domain size (through-pores of approximately 1.3 microm and silica skeletons of approximately 0.9 microm) showed a plate height of less than 5 microm at optimum linear velocities (u) of 2-3 mm/s in 80% acetonitrile for a solute having retention factors of approximately 1, and approximately 7 microm at u = 8 mm/s. With a permeability similar to that of a column packed with 5-microm particles, the monolithic silica columns were able to attain column efficiencies comparable to that of particulate columns packed with 2-2.5-microm particles, and showed performance in the "forbidden region" for the previous columns. The performance of the monolithic column can be compared favorably with that of a particle-packed column when 15,000-30,000 or more theoretical plates are desired at a pressure drop of 20-40 MPa or lower. The increased homogeneity of the co-continuous structures, in addition to the small-sized domains, contributed to the higher performance as compared to previous monolithic silica columns.

Benzene Derivatives↗
PubMed1996

Retention behavior of amino acids and peptides on protoporphyrin-silica stationary phases with varying metal ion centers.

Various metalloprotoporphyrins (MProP) covalently linked to silica supports are examined as novel immobilized metal ion affinity chromatography (IMAC) stationary phases for separations of amino acids/peptides. Under reversed-phase HPLC conditions, the MProP-silicas exhibit high affinity toward L-histidine via metal-nitrogen axial ligation interactions, with an increasing degree of histidine retention highly dependent on the specific metal ion (M) in the center of the protoporphyrin (ProP) structure: Fe(III) > Ni(II) > Cu(II) > Zn (II) approximately Cd(II). Aromatic amino acids (i.e., L-trytophan and L-phenylalanine) are also retained on MProP columns through pi-pi interactions with the immobilized porphyrins, with the greatest affinity for L-trytophan observed on CuProP-silica columns. Peptides rich in L-histidine and L-tryptophan residues are selectively retained on most of the MProP-silica phases examined; however, the addition of an organic modifier and/or lowering the pH of the mobile phase can be used independently to attenuate the pi-pi and metal ion-nitrogen ligation interactions, respectively. Reproducible separations of His-Phe and trytophan releasing hormone are achieved on a FeProP-silica column even after extensive washing with 50 mM EDTA, demonstrating a fundamental advantage of the new MProP-silica over existing IMAC stationary phases, in which the metal ion is anchored weakly to the support via immobilized iminodiacetate and related ligands.

Amino Acid Sequence↗
PubMed2001

Synthesis of ordered and disordered silicas with uniform pores on the border between micropore and mesopore regions using short double-chain surfactants.

Silica molecular sieves with uniform pores on the borderline between micropore (diameter <2 nm) and mesopore (from 2 to 50 nm) ranges were synthesized by a novel method using judiciously chosen mixtures of short double-chain alkylammonium surfactants. These silicas were characterized using X-ray diffraction (XRD), thermogravimetry, and nitrogen and argon adsorption. The calcined materials exhibited either 2-dimensional (2-D) hexagonal or disordered structures with XRD interplanar spacing from 2.51 to 2.93 nm, including the value of as small as 2.69 nm for highly ordered 2-D hexagonal silica. The dependence of the pore size and surfactant content on the surfactant chain length provided strong evidence for supramolecular templating being operative in the formation of small-pore silicas, even for the surfactant chain length of six carbon atoms. Both hexagonally ordered and disordered calcined samples were shown to exhibit narrow pore size distributions with maxima in the range from 1.96 to 2.61 nm (reliably evaluated on the basis of the unit-cell dimension and pore volume for 2-D hexagonal materials, and calculated using a properly calibrated procedure), tailored by the surfactant chain length. The samples exhibited primary pore volumes from 0.28 to 0.54 cm(3) g(-1) and specific surface areas from 730 to 930 m(2) g(-1). Because of their small yet uniform pore size and large specific surface area, the silicas reported herein promise to be useful in applications in adsorption and catalysis. Adsorption studies of these materials provided a unique new insight into the pore-filling mechanism for small-pore materials. Moreover, the approach proposed herein is expected to facilitate the synthesis of not only small-pore silicas but also materials with other framework compositions, thus largely contributing to bridging the gap in attainable pore sizes between micropore and mesopore ranges.

Silicon Dioxide↗
PubMed2002

The use of a thermally reversible bond for molecular imprinting of silica spheres.

A silica monomer-estrone complex (EstSi) having a thermally cleavable urethane bond and a cross-linkable triethoxysilane group was synthesized. From EstSi and TEOS, spherical silica particles with sizes of 1.5-3 mum were prepared. The template molecules were removed from the silica matrix by heating at 180 degrees C in DMSO in the presence of water, generating a cavity with an amino group. The control silica particles that had the same sizes and shapes were obtained with aminopropyl triethoxysilane and TEOS. When ethylene glycol was added in place of H2O, an ethyl alcoholic group was formed in the cavity. Their recognition ability and specific binding for estrone were characterized by uptake experiments. The estrone-imprinted silica particles showed a much higher recognition ability than the control silica particles and higher selectivity for estrone than testosterone propionate.

Journal Article↗
PubMed2005

Pyrolysis of mesoporous silica-immobilized 1,3-diphenylpropane. Impact of pore confinement and size.

Mesoporous silicas such as SBA-15 and MCM-41 are being actively investigated for potential applications in catalysis, separations, and synthesis of nanostructured materials. A new method for functionalizing these mesoporous silicas with aromatic phenols is described. The resulting novel hybrid materials possess silyl aryl ether linkages to the silica surface that are thermally stable to ca. 550 degrees C, but can be easily cleaved at room temperature with aqueous base for quantitative recovery of the organic moieties. The materials have been characterized by nitrogen physisorption, FTIR, NMR, and quantitative analysis of surface coverages. The maximum densities of 1,3-diphenylpropane (DPP) molecules that could be grafted to the surface were less than those measured on a nonporous, fumed silica (Cabosil) and were also found to decrease as a function of decreasing pore size (5.6-1.7 nm). This is a consequence of steric congestion in the pores that is magnified at the smaller pore sizes, consistent with parallel studies conducted using a conventional silylating reagent, 1,1,3,3-tetramethyldisilazane. Pyrolysis of the silica-immobilized DPP revealed that pore confinement leads to enhanced rates and altered product selectivity for this free-radical reaction compared with the nonporous silica, and the rates and selectivities also depended on pore size. The influence of confinement is discussed in terms of enhanced encounter frequencies for bimolecular reaction steps and pore surface curvature that alters the accessibility and resultant selectivity for hydrogen transfer steps.

Journal Article↗
PubMed2007

Composite particles of polyethylene @ silica.

Polyethylene (PE) and silica are perhaps the simplest and most common organic and inorganic polymers, respectively. We describe, for the first time, a physically interpenetrating nanocomposite between these two elementary polymers. While polymer-silica composites are well known, the nanometric physical blending of PE and silica has remained a challenge. A method for the preparation of such materials, which is based on the entrapment of dissolved PE in a polymerizing tetraethoxysilane (TEOS) system, has been developed. Specifically, the preparation of submicron particles of low-density PE@silica and high-density PE@silica is detailed, which is based on carrying out a silica sol-gel polycondensation process within emulsion droplets of TEOS dissolved PE, at elevated temperatures. The key to the successful preparation of this new composite has been the identification of a surfactant, PE-b-PEG, that is capable of stabilizing the emulsion and promoting the dissolution of the PE. A mechanism for the formation of the particles as well as their inner structure are proposed, based on a large battery of analyses, including transmission electron microscopy (TEM) and scanning electron microscopies (SEM), surface area and porosity analyses, various thermal analyses including thermal gravimetric analysis (TGA/DTA) and differential scanning calorimetry (DSC) measurements, small-angle X-ray scattering (SAXS) measurements and solid-state NMR spectroscopy.

Journal Article↗
PubMed2006

Silica-coated CdTe quantum dots functionalized with thiols for bioconjugation to IgG proteins.

Quantum dots (QDs) have been increasingly used in biolabeling recently as their advantages over molecular fluorophores have become clear. For bioapplications QDs must be water-soluble and buffer stable, making their synthesis challenging and time-consuming. A simple aqueous synthesis of silica-capped, highly fluorescent CdTe quantum dots has been developed. CdTe QDs are advantageous as the emission can be tuned to the near-infrared where tissue absorption is at a minimum, while the silica shell can prevent the leakage of toxic Cd(2+) and provide a surface for easy conjugation to biomolecules such as proteins. The presence of a silica shell of 2-5 nm in thickness has been confirmed by transmission electron microscopy and atomic force microscopy measurements. Photoluminescence studies show that the silica shell results in greatly increased photostability in Tris-borate-ethylenediaminetetraacetate and phosphate-buffered saline buffers. To further improve their biocompatibility, the silica-capped QDs have been functionalized with poly(ethylene glycol) and thiol-terminated biolinkers. Through the use of these linkers, antibody proteins were successfully conjugated as confirmed by agarose gel electrophoresis. Streptavidin-maleimide and biotinylated polystyrene microbeads confirmed the bioactivity and conjugation specificity of the thiolated QDs. These functionalized, silica-capped QDs are ideal labels, easily synthesized, robust, safe, and readily conjugated to biomolecules while maintaining bioactivity. They are potentially useful for a number of applications in biolabeling and imaging.

Biotinylation↗
PubMed2006

Preparation of highly active silica-supported Au catalysts for CO oxidation by a solution-based technique.

Although Au catalysts can be readily prepared on titania via the deposition-precipitation (DP) method, the direct application of the method similar to the preparation of silica-supported Au catalysts only results in diminished success. This paper reports a novel, efficient method to synthesize highly active Au catalysts supported on mesoporous silica (SBA-15) through a gold cationic complex precursor [Au(en)2]3+ (en = ethylenediamine) via a wet chemical process. The gold cationic precursor was immobilized on negatively charged surfaces of silica by a unique DP method that makes use of the deprotonation reaction of ethylenediamine ligands. The resulting mesoporous catalyst has been demonstrated to be highly active for CO oxidation at room temperature and even below 273 K, the activity of which is much superior to that of silica-supported Au catalysts previously prepared by various solution techniques. The pH value of the gold precursor solution plays a key role in determining the catalytic activity through the regulation of [Au(en)2]3+ deprotonation reaction and the surface interaction of silica with the gold precursor. This mesoporous gold silica catalyst has also been shown to be highly resistant to sintering because of the stabilization of Au nanoparticles inside mesopores.

Journal Article↗
PubMed2006

A photoelectrochemical device with a nanostructured SnO2 electrode modified with composite clusters of porphyrin-modified silica nanoparticle and fullerene.

A silica nanoparticle has been successfully employed as a nanoscaffold to self-organize porphyrin and C60 molecules on a nanostructured SnO2 electrode. The quenching of the porphyrin excited singlet state on the silica nanoparticle is suppressed significantly, showing that silica nanoparticles are promising scaffolds for organizing photoactive molecules three-dimensionally in nanometer scale. Marked enhancement of the photocurrent generation was achieved in the present system compared with the reference system, where a gold core was employed as a scaffold of porphyrins instead of a silica nanoparticle. The rather small incident photon-to-current efficiency relative to a similar photoelectrochemical device using a silica microparticle may result from poor electron and hole mobility in the composite film due to poor connection between the composite clusters of a porphyrin-modified silica nanoparticle and C60 in micrometer scale.

Journal Article↗
PubMed2006

Water-silica force field for simulating nanodevices.

Amorphous silica is an inorganic material that is central for many nanotechnology applications, such as nanoelectronics, microfluidics, and nanopore sensors. To use molecular dynamics (MD) simulations to study the behavior of biomolecules interacting with silica, we developed a force field for amorphous silica surfaces based on their macroscopic wetting properties that is compatible with the CHARMM force field and TIP3P water model. The contact angle of a water droplet on a silica surface served as a criterion to tune the intermolecular interactions. The resulting force field was used to study the permeation of water through silica nanopores, illustrating the influence of the surface topography and the intermolecular parameters on permeation kinetics. We find that minute modeling of the amorphous surface is critical for MD studies, since the particular arrangement of surface atoms controls sensitively electrostatic interactions between silica and water.

Nanostructures↗
PubMed2004

Synthesis and characterization of active ester-functionalized polypyrrole-silica nanoparticles: application to the covalent attachment of proteins.

Novel ester-functionalized polypyrrole-silica nanocomposite particles were prepared by oxidative copolymerization of pyrrole and N-succinimidyl ester pyrrole (50/50% initial concentrations), using FeCl3 in the presence of ultrafine silica nanoparticles (20 nm diameter). The N-succinimidyl ester pyrrole monomer was prepared in aqueous solution using 1-(2-carboxyethylpyrrole) and N-hydroxysuccinimide in the presence of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide. The resulting nanocomposites (N-succinimidyl ester polypyrrole-silica) are raspberry-shaped agglomerates of silica sol particles "glued" together by the insoluble poly(pyrrole-co-N-succinimidyl pyrrole). The N-succinimidyl ester polypyrrole-silica particles were characterized in terms of their size, density, copolymer content, and polydispersity. Scanning electron microscopy and disk centrifuge sedimentometry confirmed that the nanocomposite particles had narrow size distributions. X-ray photoelectron spectroscopy analysis indicated a silica-rich surface and a high surface concentration of N-succinimidyl ester groups. These nanoparticles exhibited good long-term dispersion stability. The chemical stability of the ester functions in aqueous media after several weeks of storage was monitored by FTIR spectroscopy. The functionalized nanocomposites were tested as bioadsorbents of human serum albumin (HSA). The very high amount of immobilized HSA determined by UV-visible spectroscopy is believed to be due to covalent binding. Incubation of the HSA-grafted nanocomposite with anti-HSA resulted in immediate flocculation, an indication that they are alternative candidates for visual diagnostic assays.

Esters↗
PubMed2004

Fluorescence anisotropy in studies of solute interactions with covalently modified colloidal silica nanoparticles.

Time-resolved anisotropy decays of a fluorescent cationic solute, rhodamine 6G (R6G), in Ludox sols were measured to characterize the extent of the ionic binding of the probe to silica particles after modification of the surface with neutral or cationic silane coupling agents. The anisotropy decays provided direct evidence for distribution of the dye between the aqueous solution (picosecond decay component) and silica particles (nanosecond decay component and residual anisotropy component, which were attributed to the wobbling motion of dye on the silica surface and to the ionically bound probe, respectively). The dye was strongly adsorbed to unmodified silica nanoparticles, to the extent that less than 1% of the dye was present in the surrounding aqueous solution. Significant decreases in the degree of probe adsorption were obtained upon covalent modification of the silica with neutral or cationic silanes, with up to 80% of the probe being present in the aqueous solution in cases where the surface was coated with (3-aminopropyl)triethoxysilane. The addition of such agents also altered the fractional distribution between the nanosecond decay component and the residual anisotropy component in favor of the nanosecond component, indicative of weaker interactions between the dye and the modified surface (i.e., more wobbling motion). The data clearly show the power of time-resolved fluorescence anisotropy decay measurements for probing the modification of silica surfaces and should prove useful in characterization of new chromatographic stationary phases.

Adsorption↗
PubMed2005

Pore size engineering in mesoporous silicas using supercritical CO2.

In this paper we investigate the use of supercritical carbon dioxide (sc-CO(2)) for synthesizing calcined mesoporous silicas with tunable pore sizes, wall thickness, and d spacings. Small angle neutron scattering was used to probe the controlled swelling of the triblock copolymer surfactant templating agents, P123 (PEO(20)PPO(69)PEO(20)), P85 (PEO(26)PPO(39)PEO(26)), and F127 (PEO(106)PPO(70)PEO(106)), as a function of CO(2) pressure. The transition from the liquid crystal phase to the calcined mesoporous silicas, formed upon condensation and drying, was also studied in detail. Powder X-ray diffraction, transmission electron microscopy, and nitrogen adsorption techniques were used to establish pore diameters, silica wall widths, and the hexagonal packing of the pores within the calcined silicas. Using a direct templating method, the diameters of mesopores and the spacing between the pores could be tuned with a high level of precision. The swelling process was observed to have no detrimental effects on the quality of silica formed, a distinct advantage over conventional swelling techniques, and all of the silicas synthesized in this study were highly ordered over distances of at least 2000 A.

Adsorption↗