Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Octanes”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30Linked to original sources

1,4-hydroxycarbonyl products of the OH radical initiated reactions of C5-C8 n-alkanes in the presence of NO.

Alkanes account for approximately 50% of nonmethane organic compounds present in urban atmospheres. Previous studies have shown that hydroxycarbonyls are important products ofthe OH radical initiated reactions of > or = C5 n-alkanes, but isomer-specific identifications and quantifications of these products have not been carried out. In this work, we have used solid-phase microextraction fibers precoated with O-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine for on-fiber derivatization of carbonyl-containing compounds with subsequent analyses by combined gas chromatography-mass spectrometry (GC-MS) and GC with flame ionization detection (GC-FID). GC-MS analyses showed the presence of the oximes of 5-hydroxy-2-pentanone and 4-hydroxypentanal from the n-pentane reaction; 5-hydroxy-2-hexanone, 6-hydroxy-3-hexanone, and 4-hydroxyhexanal from the n-hexane reaction; 5-hydroxy-2-heptanone, 6-hydroxy-3-heptanone, 1-hydroxy-4-heptanone, and 4-hydroxyheptanal from the n-heptane reaction; and 5-hydroxy-2-octanone, 6-hydroxy-3-octanone, 7-hydroxy-4-octanone, and 4-hydroxyoctanal from the n-octane reaction. The formation yields of these 1,4-hydroxycarbonyls were determined from GC-FID analyses. By use of the yields of 1,4-hydroxycarbonyls formed from n-hexane, n-heptane, and n-octane at 50% relative humidity (and those from n-pentane at both 5 and 50% relative humidity), then formation of 1,4-hydroxycarbonyls accounts for 54% of the reaction products from n-pentane, 57% from n-hexane, 51% from n-heptane, and 53% from n-octane. Combined with previously measured yields of carbonyls, alkyl nitrates, and hydroxyalkyl nitrates, we can now accountfor approximately 74-118% of the products formed from the n-pentane through n-octane reactions.

Aldehydes↗

Particle zips: vertical emulsion films with particle monolayers at their surfaces.

Vertical emulsion films with particle monolayers at their surfaces have been studied by direct microscope observations. The effects of particle wettability and surface coverage on the structure and stability of water films in octane and octane films in water have been investigated. Monodisperse silica particles (3 microm in diameter) hydrophobized to different extents have been used. It is found that the structure and stability of emulsion films strongly depend on the film type (water-in-oil or oil-in-water), the particle contact angle, the interactions between particles from the same and the opposite monolayer, and the monolayer density. Stable films are observed only when the particle wettability fulfills the condition for stable particle bridges--in agreement with the concept that hydrophilic particles can give stable oil-in-water emulsions, whereas hydrophobic ones give water-in-oil emulsions. In the case of water films with dilute disordered monolayers at their surfaces, the hydrophilic particles are expelled from the film center toward its periphery, giving a dimple surrounded by a ring of particles bridging the film surfaces. In contrast, the thinning of octane films with dilute ordered monolayers at their surfaces finally leads to the spontaneous formation of a dense crystalline monolayer of hydrophobic particles bridging both surfaces at the center of the film. The behaviors of water and octane films with dense close-packed particle monolayers at their surfaces are very similar. In both cases, a transition from bilayer to bridging monolayer is observed at rather low capillary pressures. The implications of the above finding for particle stabilized emulsions are discussed.

Journal Article↗

Using an experimental design for the optimization of LVV-haemorphin-7 and VV-haemorphin-7 extraction by an organic solvent mixture in the course of bovine haemoglobin peptic hydrolysis.

Mixture design was used to improve the extraction of two opioid peptides (LVV-haemorphin-7 and VV-haemorphin-7) by water-immiscible solvents in the course of bovine haemoglobin peptic hydrolysis. Because of the loss of the peptic activity, these two haemorphins did not appear in the aqueous phase when the peptic reaction was achieved in the presence of butan-2-ol alone. We have shown that it is possible to use octan-1-ol, as a co-solvent, to recover the peptic activity. However, when the hydrolysis was achieved with octan-1-ol alone, the two haemorphins appeared in the aqueous phase, but were not extracted by the organic phase. We therefore investigated haemorphin extraction in the course of the hydrolysis reaction by a mixture of butan-2-ol and octan-1-ol. We have determined the optimal conditions with respect to the extraction of opioid peptides and the stability of the pepsin. To design a future continuous-stirred-tank reactor, we propose a biphasic system composed of 45% water, 45% butan-2-ol and 10% octan-1-ol for the extraction of the two haemorphins in the course of bovine haemoglobin peptic hydrolysis.

Algorithms↗

Purification and properties of the S1 secondary alkylsulphohydrolase of the detergent-degrading micro-organism, Pseudomonas C12B.

The S1 secondary alkylsulphohydrolase of the detergent-degrading micro-organism, Pseudomonas C12B, was separated from other alkylsulphohydrolases and purified to homogeneity. Under the experimental conditions used the enzyme completely hydrolysed d-octan-2-yl sulphate (d-1-methylheptyl sulphate), but showed no activity towards the corresponding l-isomer. Additional evidence has been obtained to indicate that it is probably optically stereospecific for d-secondary alkyl sulphate esters with the ester sulphate group at C-2 and with a chain length of at least seven carbon atoms. Enzyme activity towards racemic samples of heptan-2-yl sulphate (1-methylhexyl sulphate), octan-2-yl sulphate and decan-2-yl sulphate (1-methylnonyl sulphate) increased with increasing chain length. l-Octan-2-yl sulphate is a competitive inhibitor of the enzyme, as are certain primary alkyl sulphates and primary alkanesulphonates. Inhibition by each of the last two types of compounds is characteristic of the behaviour of an homologous series. Inhibition increases with increasing chain length and plots of log K(i) values against the number of carbon atoms in each alkyl chain show the expected linear relationship. A crude preparation of the S2 secondary alkylsulphohydrolase was used to show that this particular enzyme hydrolyses l-octan-2-yl sulphate, but is probably inactive towards the corresponding d-isomer. The similarity of the S1 and S2 enzymes to the CS2 and CS1 enzymes respectively of Comamonas terrigena was established, and some comments have been made on the possible roles of these and other alkylsulphohydrolases in the biodegradation of detergents.

Alkanesulfonates↗

Squeezing wetting and nonwetting liquids.

We present molecular-dynamics results for the squeezing of octane (C8H18) between two approaching solid elastic walls with different wetting properties. The interaction energy between the octane bead units and the solid walls is varied from a very small value (1 meV), corresponding to a nonwetting surface with a very large contact angle (nearly 180 degrees), to a high value (18.6 meV) corresponding to complete wetting. When at least one of the solid walls is wetted by octane we observe well defined molecular layers develop in the lubricant film when the thickness of the film is of the order of a few atomic diameters. An external squeezing-pressure induces discontinuous, thermally activated changes in the number n of lubricant layers (n-->n-1 layering transitions). With increasing interaction energy between the octane bead units and the solid walls, the transitions from n to n-1 layers occur at higher average pressure. This results from the increasing activation barrier to nucleate the squeeze-out with increasing lubricant-wall binding energy (per unit surface area) in the contact zone. Thus, strongly wetting lubricant fluids are better boundary lubricants than the less wetting ones, and this should result in less wear. We analyze in detail the effect of capillary bridge formation (in the wetting case) and droplets formation (in the nonwetting case) on the forces exerted by the lubricant on the walls. For the latter case small liquid droplets may be trapped at the interface, resulting in a repulsive force between the walls during squeezing, until the solid walls come into direct contact, where the wall-wall interaction may be initially attractive. This effect is made use of in some practical applications, and we give one illustration involving conditioners for hair care application.

Journal Article↗

Amine-catalyzed hydrolyses of cyclodextrin cinnamates.

Hydrolyses of beta-cyclodextrin cinnamate (betaCDC) and alpha-cyclodextrin cinnamate were catalyzed by amines such as 1,4-diazabicyclo(2.2.2)octane, triethylamine, quinuclidine, piperidine, diisobutylamine, and n-butylamine. The rate constant of hydrolyses of the betaCDC-amine complexes follows the order: 1,4-diazabicyclo(2.2.2)octane > n-butylamine > quinuclidine > piperidine > triethylamine >> diisobutylamine. The ratio of the catalytic rate constant for the betaCDC/1,4-diazabicyclo(2.2.2)octane complex to the spontaneous rate constant for betaCDC is about 6-fold and is almost independent of pH below pH 11.5; but, it then drastically increases with pH above pH 11.5, up to 57-fold at pH 13.6 which is much higher than previous attempts. The pH-rate constant profile and isotope effect with deuterium oxide solvent indicate that 1,4-diazabicyclo(2.2.2)octane, included in betaCDC, assists the catalytic nucleophilic attack by hydroxide ion toward the carbonyl carbon of betaCDC. Acceleration of deacylation of acyl-cyclodextrins, by amines, has made the cyclodextrin-catalyzed hydrolysis of esters an even better model of hydrolytic enzyme reactions than those developed previously.

Journal Article↗

A study on the equivalence of olive oil and the EU official substitute test media for migration testing at high temperatures.

As a consequence of an increasing awareness and findings about the technical and analytical difficulties related to the employment of triglycerides as fatty food simulants in migration testing, EU Directive 82/711/EEC on the basic rules of migration has been amended for the second time and adapted with the recent Commission Directive 97/48/EC. The major merit of this important amendment is to authorize alternative tests such as extraction tests and to allow substitute tests for the fat test with concrete indication of corresponding test conditions to be applied. As a novelty in food law compliance testing it authorizes a modified polyphenylene oxide (MPPO), well-known as Tenax, a thermostable and highly adsorptive porous polymer, as a 'solid' matrix to substitute fat simulant D at temperatures equal to or higher than 100 degrees C. In the study presented here, comparative migration testing--overall and specific--was carried out between fat simulants olive oil and 14C-labelled HB 307 and the substitute test media iso-octane, 95% ethanol and MPPO using polypropylene materials as examples at test temperatures of 100 degrees C to 120 degrees C and prescribed corresponding substitute test conditions. As a consequence, a number of conclusions were drawn which are relevant for overall and/or specific migration testing under the investigated test conditions. One of the major findings was that MPPO was generally more equivalent to the fat test than the other two substitute test media. The presence of volatile hydrocarbons in the test samples was found to play a crucial role with respect to the equivalence of the iso-octane-based substitute test. At high volatile concentrations in the test sample the iso-octane test underestimated the olive oil benchmark whereas low volatile concentrations led to satisfying equivalence. It is therefore recommended that the procedure is modified and GC-FID screening of the isooctane extract is carried out. As a logical consequence, the possibility of quantitative determination of the overall extract by GC-FID is recommendable and should be investigated in more depth. Concerning the overall migration test procedure in olive oil, the vacuum pre-conditioning at 60 degrees C should be given re-consideration to avoid the possibility of loss of volatile migrants whose determination should be within the scope of the overall migration test method itself. Finally, the specific migration related equivalence between olive oil, MPPO and iso-octane needs further investigations to clarify the net effect of strongly increased diffusion rates at the regular high temperature versus the substitute test solvent accelerated extraction effect at 60 degrees C. Stability aspects of migrants at the different test temperatures deserve further consideration.

Chromatography, Gas↗

Functional expression of a mammalian olfactory receptor in Caenorhabditis elegans.

The olfactory system in both vertebrates and invertebrates can recognize and distinguish thousands of chemical signals. Olfactory receptors are responsible for the early molecular events in the detection of volatile compounds and the perception of smell. Recently, candidate olfactory receptor genes have been identified in several organisms, but their characterization is far from been completed due to the difficulty to functionally express them in heterologous systems. To circumvent such difficulty, we expressed a mammalian olfactory gene, rat I7, in the nematode. We generated transgenic worms expressing I7 in AWA or AWB chemosensory neurons and performed behavioural assays using different concentrations of the rat I7 receptor agonist octanal. Pure octanal was repellent for wild-type worms whereas a 1:10 dilution was attractant. Expression of I7 in AWB neurons counteracted the volatile attraction to diluted octanal observed in control wild-type worms. Furthermore, expression of I7 in AWA neurons counteracted the volatile avoidance to pure octanal observed in wild-type worms. These results indicate that it is possible to functionally express mammalian olfactory receptors in providing a research tool to efficiently search for specific olfactory receptor ligands and to extend our understanding of the molecular basis of olfaction.

Animals↗

Comparison of different inhalational perfluorocarbons in a rabbit model of acute lung injury.

The purpose of this study was to investigate the influence of different inhaled perfluorocarbons (PFC) upon pulmonary mechanics and gas exchange in a saline lavage model of acute lung injury. A randomized, controlled animal trial was conducted at the university hospital laboratory. Pulmonary gas exchange (pGE), static compliance (Cst), and basic hemodynamics (heart rate [HR], arterial [AP] and central venous pressures [CVP]) were compared. After induction of lung injury by repeated pulmonary lavage with saline solution, 35 New Zealand rabbits (3 +/- 0.2 kg) were randomized into five groups with seven animals each: 1) conventional ventilated control, 2) perfluorooctane (octane), 3) Perflubron (perfluorooctylbromide [PFOB]), 4) Perfluoro-1,3,5-trimethylcyclohexane (PP 4), and 5) perfluorohexane (hexane). Consecutively, PFC groups were subjected to a 120 minute study period applying mechanical ventilation (tidal volume of 7 ml/kg) in conjunction with PFC performed by a modified halothane vaporizer. Amount of vaporization was controlled by weighing the vaporizer at approximately 25 ml/h/kg body-weight PFC. Controls remained gas ventilated. After injury, PaO2 was control = 53 +/- 13 mbar, octane = 55 +/- 24 mbar, perflubron = 57 +/- 18 mbar, PP4 = 68 +/- 25 mbar, and hexane = 51 +/- 16 mbar. Within the 120 minute period, PaO2 was control = 51 +/- 19 mbar, octane = 42 +/- 6 mbar, perflubron = 40 +/- 11 mbar, PP4 = 47 +/- 10 mbar, and hexane = 60 +/- 8 mbar, respectively. At baseline, after injury, and throughout the study period, pGE and Cst, as well as HR, AP, and CVP, did not significantly differ when compared with octane, PP4, PFOB, and controls (p > 0.05), whereas hexane significantly improved pGE and Cst (p < 0.05). From four different inhaled perfluorocarbons, only perfluorohexane has measureable impact upon gas exchange and lung mechanics when compared with a conventional lung protective ventilation mode.

Administration, Inhalation↗

Evidence for an Elongation/Reduction/C1-Elimination Pathway in the Biosynthesis of n-Heptane in Xylem of Jeffrey Pine.

The biosynthetic pathway to n-heptane was investigated by examining the effect of the [beta]-keto acyl-acyl carrier protein synthase inhibitor (2R,3S)-2,3-epoxy-4-oxo-7E,10E-dodecadienamide (cerulenin), a thiol reagent ([beta]-mercaptoethanol), and an aldehydetrapping reagent (hydroxylamine) on the biosynthesis of n-[14C]heptane and putative intermediates in xylem sections of Jeffrey pine (Pinus jeffreyi Grev.& Balf.) incubated with [14C]acetate. Cerulenin inhibited C18 fatty acid biosynthesis but had relatively little effect on radiolabel incorporation into C8 fatty acyl groups and n-heptane. [beta]-Mercaptoethanol inhibited n-heptane biosynthesis, with a corresponding accumulation of radiolabel into both octanal and 1-octanol, whereas hydroxylamine inhibited both n-heptane and 1-octanol biosynthesis, with radiolabel accumulation in octyl oximes. [14C]Octanal was converted to both n-heptane and 1-octanol when incubated with xylem sections, whereas [14C]1-octanol was converted to octanal and n-heptane in a hydroxylamine-sensitive reaction. These results suggest a pathway for the biosynthesis of n-heptane whereby acetate is polymerized via a typical fatty acid synthase reaction sequence to yield a C8 thioester, which subsequently undergoes a two-electron reduction to generate a free thiol and octanal, the latter of which alternately undergoes an additional, reversible reduction to form 1-octanol or loss of C1 to generate n-heptane.

Journal Article↗

Two distinct monooxygenases for alkane oxidation in Nocardioides sp. strain CF8.

Alkane monooxygenases in Nocardioides sp. strain CF8 were examined at the physiological and genetic levels. Strain CF8 can utilize alkanes ranging in chain length from C(2) to C(16). Butane degradation by butane-grown cells was strongly inhibited by allylthiourea, a copper-selective chelator, while hexane-, octane-, and decane-grown cells showed detectable butane degradation activity in the presence of allylthiourea. Growth on butane and hexane was strongly inhibited by 1-hexyne, while 1-hexyne did not affect growth on octane or decane. A specific 30-kDa acetylene-binding polypeptide was observed for butane-, hexane-, octane-, and decane-grown cells but was absent from cells grown with octane or decane in the presence of 1-hexyne. These results suggest the presence of two monooxygenases in strain CF8. Degenerate primers designed for PCR amplification of genes related to the binuclear-iron-containing alkane hydroxylase from Pseudomonas oleovorans were used to clone a related gene from strain CF8. Reverse transcription-PCR and Northern blot analysis showed that this gene encoding a binuclear-iron-containing alkane hydroxylase was expressed in cells grown on alkanes above C(6). These results indicate the presence of two distinct monooxygenases for alkane oxidation in Nocardioides sp. strain CF8.

Actinomycetales↗

Synthesis and structure-activity relationship of 3-Substituted benzamide, benzo [b]furan-7-carboxamide, 2,3-dihydrobenzo[b]furan-77-carboxamide, and indole-5-carboxamide derivatives as selective serotonin 5-HT4 receptor agonists.

The title compounds (6-9) were prepared and evaluated for serotonin 5-HT4 agonistic activity in in vitro tests. Introducing a propyl or allyl group at the 3-position of benzamide caused only a slight enhancement of agonistic activity. Construction of the benzo[b]furan skeleton and 2,3-dihydrobenzo[b]furan skeleton caused a significant enhancement of the activity. 4-amino-N-[2-(1-azabicyclo[3.3.0]octan-5-yl)ethyl]-5-chloro- 2-methylbenzo[b]furan-7-carboxamide (7b) hemifumarate was as potent as cisapride. 4-Amino-N-[2-(1-azabicyclo[3.3.0]octan-5-yl)ethyl]-5-chloro- 2,3-dihydro-2-methylbenzo[b]furan-7-carboxamide (8a) hemifumarate, 4-amino-N-[2-(1-azabicyclo[3.3.0]octan-5-yl)ethyl]-5-chloro- 2,3-dihydro-2-ethylbenzo[b]furan-7-carboxamide (8c) hemifumarate, and 4-amino-N-[2-(1-azabicyclo[3.3.0]octan-5-yl)ethyl]-5-chloro- 2,3-dimethylbenzo[b]furan-7-carboxamide (8d) hemifumarate were more potent than cisapride. Furthermore, 8a hemifumarate was free from dopamine D1, D2, serotonin 5-HT1, 5-HT2 and muscarine M1, M2 receptor binding activity in the in in vitro tests. On the other hand, construction of the indole skeleton caused a remarkable decrease in activity.

Animals↗

Determination of phenol using an enhanced chemiluminescent assay.

Enhanced chemiluminescence (ECL) describes the phenomenon of increased light output in the luminol oxidation reaction catalysed by horseradish peroxidase (HRP) in the presence of certain compounds, such as para-iodophenol. In this work, the effects of phenol on the para-iodophenol-enhanced HRP-catalysed chemiluninescent reaction intensity in an aqueous buffer (Tris-HCl buffer, pH 8.5) and in a surfactant-water-octane mixture were compared. Preincubation of HRP at low phenol concentrations stimulated the chemiluminescent intensity in the assay performed in an aqueous buffer, but did not have significant effect in the sodium bis(2-ethylhexyl)sulphosuccinate) (Aerosol OT, AOT) applied system. It was also observed that HRP preincubation with phenol concentration higher than 0.003 mg/mL produced an inhibitory effect on the enzyme activity for both assay systems. Only an inhibitory effect of phenol on the chemiluminescent intensity in the surfactant system in octane (as organic solvent) was observed. Three assays were developed to determine phenol concentration in water and in an organic solvent mixture. The detection limits were 0.006, 0.003 and 0.0005 mg/mL, respectively, for the buffer-containing system, the AOT-applied system with phenol standard solutions in water and for the AOT-applied system with phenol standard solutions in octane.

Calibration↗

Voltage-dependent insertion of alamethicin at phospholipid/water and octane/water interfaces.

Understanding the binding and insertion of peptides in lipid bilayers is a prerequisite for understanding phenomena such as antimicrobial activity and membrane-protein folding. We describe molecular dynamics simulations of the antimicrobial peptide alamethicin in lipid/water and octane/water environments, taking into account an external electric field to mimic the membrane potential. At cis-positive potentials, alamethicin does not insert into a phospholipid bilayer in 10 ns of simulation, due to the slow dynamics of the peptide and lipids. However, in octane N-terminal insertion occurs at field strengths from 0.33 V/nm and higher, in simulations of up to 100 ns duration. Insertion of alamethicin occurs in two steps, corresponding to desolvation of the Gln7 side chain, and the backbone of Aib10 and Gly11. The proline induced helix kink angle does not change significantly during insertion. Polyalanine and alamethicin form stable helices both when inserted in octane and at the water/octane interface, where they partition in the same location. In water, both polyalanine and alamethicin partially unfold in multiple simulations. We present a detailed analysis of the insertion of alamethicin into the octane slab and the influence of the external field on the peptide structure. Our findings give new insight into the mechanism of channel formation by alamethicin and the structure and dynamics of membrane-associated helices.

Alamethicin↗

Migration from PVC cling films compared with their field of application.

Samples of PVC cling films were taken at importers, wholesalers and retail shops, and their overall migration to the alternative food simulant iso-octane was measured, after establishment of a correlation between overall migration to olive oil at 40 degrees C in 10 days and to iso-octane in 2 h. Results of the migration testing were compared with the recommended and/or actual use of the PVC film and the labelling discussed in relation to the relevant EEC directives on food contact plastics. The correct labelling of plasticized PVC film intended for use in retail packaging is important to avoid the risk of significant consumer intakes of the plasticizer di-(2-ethylhexyl) adipate (DEHA) after the film has been used in contact with fatty foodstuffs. Sixty percent of the films declared for use in contact with fatty foods showed too high overall migration compared with the current interpretation of legislation at the time of sampling. In most instances DEHA made up about 80% of the total amount of plastic constituents migrating to iso-octane. Taking into consideration a specific migration limit of 3 mg DEHA/dm2, 77% of the films used for fatty foodstuff analysed were not acceptable. The migration of DEHA to non-fatty foods defined as the food simulant water was at or below 0.1 mg/dm2 in all PVC-films.

Adipates↗

Microbial growth on hydrocarbons: terminal branching inhibits biodegradation.

A variety of octane-utilizing bacteria and fungi were screened for growth on some terminally branched dimethyloctane derivatives to explore the effects of iso- and anteiso-termini on the biodegradability of such hydrocarbons. Of 27 microbial strains tested, only 9 were found to use any of the branched hydrocarbons tested as a sole carbon source, and then only those hydrocarbons containing at least one iso-terminus were susceptible to degradation. Anteiso-or isopropenyl termini prevented biodegradation. None of the hydrocarbonoclastic yeasts tested was able to utilize branched-hydrocarbon growth sustrates. In the case of pseudomonads containing the OCT plasmid, whole-cell oxidation of n-octane was poorly induced by terminally branched dimethyloctanes. In the presence of a gratuitous inducer of the octane-oxidizing enzymes, the iso-branched 2,7-dimethyloctane was slowly oxidized by whole cells, whereas the anteiso-branched 3,6-dimethyloctane was not oxidized at all. This microbial sampling dramatically illustrated the deleterious effect of alkyl branching, especially anteiso-terminal branching, on the biodegradation of hydrocarbons.

Bacteria↗

Hydration of enzyme in nonaqueous media is consistent with solvent dependence of its activity.

Water plays an important role in enzyme structure and function in aqueous media. That role becomes even more important when one focuses on enzymes in low water media. Here we present results from molecular dynamics simulations of surfactant-solubilized subtilisin BPN' in three organic solvents (octane, tetrahydrofuran, and acetonitrile) and in pure water. Trajectories from simulations are analyzed with a focus on enzyme structure, flexibility, and the details of enzyme hydration. The overall enzyme and backbone structures, as well as individual residue flexibility, do not show significant differences between water and the three organic solvents over a timescale of several nanoseconds currently accessible to large-scale molecular dynamics simulations. The key factor that distinguishes molecular-level details in different media is the partitioning of hydration water between the enzyme and the bulk solvent. The enzyme surface and the active site region are well hydrated in aqueous medium, whereas with increasing polarity of the organic solvent (octane --> tetrahydrofuran --> acetonitrile) the hydration water is stripped from the enzyme surface. Water stripping is accompanied by the penetration of tetrahydrofuran and acetonitrile molecules into crevices on the enzyme surface and especially into the active site. More polar organic solvents (tetrahydrofuran and acetonitrile) replace mobile and weakly bound water molecules in the active site and leave primarily the tightly bound water in that region. In contrast, the lack of water stripping in octane allows efficient hydration of the active site uniformly by mobile and weakly bound water and some structural water similar to that in aqueous solution. These differences in the active site hydration are consistent with the inverse dependence of enzymatic activity on organic solvent polarity and indicate that the behavior of hydration water on the enzyme surface and in the active site is an important determinant of biological function especially in low water media.

Acetonitriles↗

Integrated two-liquid phase bioconversion and product-recovery processes for the oxidation of alkanes: process design and economic evaluation

Pseudomonas oleovorans and recombinant strains containing the alkane oxidation genes can produce alkane oxidation products in two-liquid phase bioreactor systems. In these bioprocesses the cells, which grow in the aqueous phase, oxidize apolar, non-water soluble substrates. The apolar products typically accumulate in the emulsified apolar phase. We have studied both the bioconversion systems and several downstream processing systems to separate and purify alkanols from these two-liquid phase media. Based on the information generated in these studies, we have now designed bioconversion and downstream processing systems for the production of 1-alkanols from n-alkanes on a 10 kiloton/yr scale, taking the conversion of n-octane to 1-octanol as a model system. Here, we describe overall designs of fed-batch and continuous-fermentation processes for the oxidation of octane to 1-octanol by Pseudomonas oleovorans, and we discuss the economics of these processes. In both systems the two-liquid phase system consists of an apolar phase with hexadecene as the apolar carrier solvent into which n-octane is dissolved, while the cells are present in the aqueous phase. In one system, multiple-batch fermentations are followed by continuous processing of the product from the separated apolar phase. The second system is based on alkane oxidation by continuously growing cultures, again followed by continuous processing of the product. Fewer fermentors were required and a higher space-time-yield was possible for production of 1-octanol in a continuous process. The overall performance of each of these two systems has been modeled with Aspen software. Investment and operating costs were estimated with input from equipment manufacturers and bulk-material suppliers. Based on this study, the production cost of 1-octanol is about 7 US$kg-1 when produced in the fed-batch process, and 8 US$kg-1 when produced continuously. The comparison of upstream and downstream capital costs and production costs showed significantly higher upstream costs for the fed-batch process and slightly higher upstream costs for continuous fermentation. The largest cost contribution was due to variable production costs, mainly resulting from media costs. The organisms used in these systems are P. putida alk+ recombinants which oxidize alkanes, but cannot oxidize the resulting alkanols further. Hence, such cells need a second carbon source, which in these systems is glucose. Although the continuous process is about 10% more expensive than the fed-batch process, improvements to reduce overall cost can be achieved more easily for continuous than for fed-batch fermentation by decreasing the dilution rate while maintaining near constant productivity. Improvements relevant to both processes can be achieved by increasing the biocatalyst performance, which results in improved overall efficiency, decreased capital investment, and hence, decreased production cost. Copyright 1999 John Wiley & Sons, Inc.

Journal Article↗