Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Cellulose”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30Linked to original sources

Optimization of fermentation conditions for the production of bacterial cellulose by a newly isolated Acetobacter sp. A9 in shaking cultures.

The optimum fermentation conditions for the production of cellulose by a newly isolated Acetobacter sp. A9 were determined by shaken cultures. The strain was able to produce cellulose at 25-30 degrees C with a maximum at 30 degrees C. Cellulose production occurred at pH 4.5-7.5 with a maximum at pH 6.5. The improved medium composition was 4% (w/v) glucose, 0.1% (w/v) yeast extract, 0.7% (w/v) polypeptone and 0.8% (w/v) Na(2)HPO(4).12H(2)O. Under these culture conditions, 3.8 g/l cellulose was produced after 7 days of cultivation, although this strain produced only 2.2 g/l in the standard medium. The addition of ethanol to the improved medium enhanced cellulose production: in an improved medium containing 1.4% (v/v) ethanol, cellulose production was 15.2 g/l, which was about four times higher than that without ethanol. Addition of ethanol was found to eliminate the spontaneous mutation of Acetobacter sp. A9.

Acetobacter↗

Cultivation of Acetobacter xylinum for bacterial cellulose production in a modified airlift reactor.

Acetobacter xylinum for bacterial cellulose production was cultivated in a modified airlift reactor. Better results were obtained from the modified reactor than from a conventional bubble column. After 72 h of cultivation, the final concentration of bacterial cellulose was 7.72 g/l and the productivity was 0.107 g/l per h in the modified airlift reactor. The concentration of bacterial cellulose was about three times higher than that produced in the conventional bubble column. Moreover, the bacterial cellulose produced using the modified reactor formed a unique elliptical pellet (the average diameter was 10 mm), which is different from the fibrous form produced using the stirred-tank reactor. The modified airlift reactor with the suspended bacterial cellulose in pellet form had a higher volumetric oxygen-transfer coefficient and mixing capability than that with bacterial cellulose in fibrous form. The dissolved oxygen in the modified airlift reactor could be maintained above 35% throughout the cultivation.

Bioreactors↗

Platelet adhesion, contact phase coagulation activation, and C5a generation of polyethylene glycol acid-grafted high flux cellulosic membrane with varieties of grafting amounts.

Grafting of polyethylene glycol chains onto cellulosic membrane can be expected to reduce the interaction between blood (plasma protein and cells) and the membrane surface. Alkylether carboxylic acid (PEG acid) grafted high flux cellulosic membranes for hemodialysis, in which the polyethylene glycol chain bears an alkyl group at one side and a carboxyl group at the other side, have been developed and evaluated. PEG acid-grafted high flux cellulosic membranes with various grafting amounts have been compared with respect to platelet adhesion, the contact phase of blood coagulation, and complement activation in vitro. A new method of quantitating platelet adhesion on hollow-fiber membrane surfaces has been developed, which is based on the determination of lactate dehydrogenase (LDH) activity after lysis of the adhered platelets. PEG acid-grafted high flux cellulosic membranes showed reduced platelet adhesion and complement activation effects in grafting amounts of 200 ppm or higher without detecting adverse effects up to grafting amounts of 850 ppm. The platelet adhesion of a PEG acid-grafted cellulosic membrane depends on both the flux and grafting amounts of the membrane. It is concluded that the grafting of PEG acid onto a cellulosic membrane improves its biocompatibility as evaluated in terms of platelet adhesion, complement activation, and thrombogenicity.

Animals↗

The cellulose synthase gene of Dictyostelium.

Cellulose is a major component of the extracellular matrices formed during development of the social amoeba, Dictyostelium discoideum. We isolated insertional mutants that failed to accumulate cellulose and had no cellulose synthase activity at any stage of development. Development proceeded normally in the null mutants up to the beginning of stalk formation, at which point the culminating structures collapsed onto themselves, then proceeded to attempt culmination again. No spores or stalk cells were ever made in the mutants, with all cells eventually lysing. The predicted product of the disrupted gene (dcsA) showed significant similarity to the catalytic subunit of cellulose synthases found in bacteria. Enzyme activity and normal development were recovered in strains transformed with a construct expressing the intact dcsA gene. Growing amoebae carrying the construct accumulated the protein product of dcsA, but did not make cellulose until they had developed for at least 10 hr. These studies show directly that the product of dcsA is necessary, but not sufficient, for synthesis of cellulose.

Amino Acid Sequence↗

The binding specificity and affinity determinants of family 1 and family 3 cellulose binding modules.

Cellulose binding modules (CBMs) potentiate the action of cellulolytic enzymes on insoluble substrates. Numerous studies have established that three aromatic residues on a CBM surface are needed for binding onto cellulose crystals and that tryptophans contribute to higher binding affinity than tyrosines. However, studies addressing the nature of CBM-cellulose interactions have so far failed to establish the binding site on cellulose crystals targeted by CBMs. In this study, the binding sites of CBMs on Valonia cellulose crystals have been visualized by transmission electron microscopy. Fusion of the CBMs with a modified staphylococcal protein A (ZZ-domain) allowed direct immuno-gold labeling at close proximity of the actual CBM binding site. The transmission electron microscopy images provide unequivocal evidence that the fungal family 1 CBMs as well as the family 3 CBM from Clostridium thermocellum CipA have defined binding sites on two opposite corners of Valonia cellulose crystals. In most samples these corners are worn to display significant area of the hydrophobic (110) plane, which thus constitutes the binding site for these CBMs.

Base Sequence↗

Parallel-up structure evidences the molecular directionality during biosynthesis of bacterial cellulose.

The "parallel-up" packing in cellulose Ialpha and Ibeta unit cells was experimentally demonstrated by a combination of direct-staining the reducing ends of cellulose chains and microdiffraction-tilting electron crystallographic analysis. Microdiffraction investigation of nascent bacterial cellulose microfibrils showed that the reducing end of the growing cellulose chains points away from the bacterium, and this provides direct evidence that polymerization by the cellulose synthase takes place at the nonreducing end of the growing cellulose chains. This mechanism is likely to be valid also for a number of processive glycosyltransferases such as chitin synthases, hyaluronan synthases, and proteins involved in the synthesis of nodulation factor backbones.

Bacteria↗

Carbohydrate-binding modules recognize fine substructures of cellulose.

Competition isotherms are used to identify the set of cellulose substructures to which cellulose binding modules (CBMs) from families 2a, 3, 4, 9, and 17 bind. The experiments are based on coupling a unique fluorescent tag to each CBM in a manner that does not alter the natural binding properties of the CBM and therefore allows the surface and solution concentrations of each CBM to be monitored as a function of time and composition. Adsorption and surface exchange of like or competing CBMs are monitored using a range of cellulose preparations varying in both crystallinity and provenance. CBMs from families 2a, 3, 4, 9, and 17 are shown to recognize different physical forms of prepared cellulose. The demonstration of the very fine binding specificity of cellulose-specific CBMs implies that the polysaccharide targets of CBMs extend down to the resolution of cellulose microstructures.

Binding Sites↗

Assessment of fungal growth on sodium polyborate-treated cellulose insulation.

Cellulose insulation has rapidly gained a large market share among general contractors and homeowners. Recent interest regarding health effects of high concentrations of fungi within indoor environments (building-related illnesses or sick building syndrome) has promoted concern about susceptibility of building materials, including wood products (in general) and cellulose insulation (specifically), to fungal attack. This study reports an assessment of fungal growth on cellulose insulation made from recycled paper and treated with varying concentrations of sodium polyborate within half-scale wall units exposed to variable and high ambient temperatures and relative humidities throughout the summer. Boron-treated and untreated (control) cellulose insulation within the wall units were challenged with a suspension containing high concentrations of spores of five fungal species commonly found in indoor environments. Our results suggest that cellulose insulation treated with sodium polyborate (a) precludes the growth of the five common fungal species; (b) harbors fewer fungal species before and after being challenged with the fungal spore suspension; and (c) is likely having a cytotoxic or sporocidal effect on many, if not all, fungal species. These results suggest that cellulose insulation treated with sodium polyborate, when properly applied and installed, precludes fungal growth for at least 124 days at high temperatures and relative humidities.

Air Pollution, Indoor↗

Coprocessing of powdered cellulose and magnesium carbonate: direct tableting versus tableting after roll compaction/dry granulation.

Mixtures of magnesium carbonate (MC) with three types of powdered cellulose (M80, P290, A300) were tableted directly or after roll compaction/dry granulation. The fraction of powdered cellulose in the mixture was varied from 0% to 25% (w/w). The properties of the granules, blends, and their corresponding tablets were analyzed. Granules with a low amount of A300 showed the best flow properties, whereas the fibrous shape of the binding agents M80 and P290 impaired the free flow. Heckel plots showed clearly the different behavior of powdered cellulose in blends and granules during the tableting process. The Heckel-Plots for pure MC powder and granulated MC (MCgr) were similar. Increasing the fraction of powdered cellulose resulted in a fan-shaped set of curves, which is a reflection of an increased densification. Physical mixtures of all three powdered celluloses and granulated mixtures of M80 resulted in a higher densification compared with pure MC. In contrast, the granulated mixtures of P290 and A300 resulted in a diminished densification during tableting, which means that the coprocessed mixtures behaved differently during tableting compared with the physical mixtures. The curves were lower than those of pure MC and MCgr most pronounced at a fraction of 5% powdered cellulose. The tablet pore structure was evaluated by mercury porosimetry. The addition of P290 and A300 to the dry granules resulted in tablets with a higher fraction of smaller pores. Comparably high values for tablet tensile strength and low friability resulted from this special tablet structure. Roll compacted/dry granulated MC, coprocessed with 5% of P290 or A300, seems to be a promising excipient for direct compression. This coprocessed product combines good flow and tablet properties, and is superior to pure MC or a physical mixture of MC and PC.

Cellulose↗

Synthesis of cellulose by Acetobacter xylinum. V. Ultrastructure of polymer.

Appearance of cellulose microfibrils in the medium of a suspension of cells of Acetobacter xylinum in buffered glucose solution was preceded by a stage during which the cellulose in the medium was amorphous within the available resolution. The size of the vertical axis of the microfibrils of the bacterial cellulose was found on the basis of measurement of shadow length to be only about 16 A. In good agreement with findings of earlier workers, the size of the lateral axis ("width") of the image of the metal-shadowed cellulose microfibrils was found to be 11 mmicro. After correcting for a large part probably contributed by deposited metal in the observed width of the microfibrils, the real width is estimated roughly to be in the neighborhood of 3 mmicro. To account for the occurrence of diverse morphological elements in the fields and for the fact that the cellulose fibrils are free entities rather than physical appendages of the cell, it is suggested that individual cellulose molecules are released at the cell surface and diffuse into the medium, wherein they finally enter into crystal-line patterns.

Acetobacter↗

Influence of refined cellulose on human bowel function and calcium and magnesium balance.

The effect of cellulose purified from wood pulp on wet and dry stool weights, gastrointestinal transit time (TT), frequency of defecation, and calcium and magnesium balances was tested. Seven healthy women consumed a low fiber diet of constant composition (percentage of total kcal: 23% protein, 30% fat, 47% carbohydrate) and the same metabolically controlled diet to which 16 g of refined cellulose (Solka Floc) was added. Each diet was consumed for approximately one month. The neutral detergent fiber contents of the two diets were 9.5 and 23.5 g, respectively. Cellulose consumption significantly increased mean daily wet stool weight from 74.6 +/- 23.4 (SD) to 130.5 +/- 29.4 g, mean daily dry fecal weight from 19.1 +/- 4.2 to 39.5 +/- 7.7 g, and frequency of defecatin from 0.85 +/- 0.2 to 1.10 +/- 0.29/day. Cellulose effectively shortened TT of two subjects with initially slow TT (7 days), but mean TT of all subjects was not significantly affected when fiber was added to the diet. Fecal excretions of calcium and magnesium were significantly greater when the diet containing cellulose was fed, and only calcium balance was significantly more negative. These results suggest that moderate levels of refined cellulose adversely increased fecal losses of calcium and magnesium. All other indices of bowel function remained within normal ranges.

Adult↗

The prevention of colon carcinogenesis in rats by dietary cellulose is greater than the promotive effect of dietary lard as assessed by repeated endoscopic observation.

We developed a method which we used in the current study to observe the rat colon endoscopically. Our goal was to evaluate the entire course in the development of experimental large bowel tumors through serial observations in the same rat. We compared the effects of dietary lard and cellulose on rat colon tumorigenesis in a 2 x 3 factorial design. Sprague-Dawley rats (n = 90) were divided into 6 diet groups: rats were fed a diet without cellulose that contained 5, 10, and 15 g/100 g lard, or diets containing 15% cellulose diet (15 g cellulose/100 g diet) and the same concentrations of lard. The development of large bowel tumors induced by the administration of 1,2-dimethylhydrazine (25 mg/kg body weight) for 19 wk was examined endoscopically. Tumor induction rates in the 15% cellulose groups were lower than in the 0% cellulose groups (P = 0.008), independent of the lard concentration. These results suggest that the preventive effect of cellulose against large bowel tumorigenesis is greater than the promotive effect of fat under the current experimental conditions.

1,2-Dimethylhydrazine↗

A stable planar bilayer membrane of phospholipid supported by cellulose sheets.

A new method is reported for preparing a thin planar membrane of 1,2-distearoylsn-glycero-3-phosphocholine and egg yolk lecithin-cholesterol (molar ratio of 1:1) between a pair of cellulose sheets. This technique, developed from the method of the multilayer planar membrane preparation (Setaka, M., et al. (1979) J. Biochem. 86, 355-362; 1619-1622; (1980) J. Biochem. 88, 1819-1829), consisted of three experimental processes. First, a phospholipid monolayer was prepared at an air-water interface, then taken up on a stretched cellulose sheet. A thin lipid membrane, supported from both sides by cellulose sheets, was constructed by combining two of these lipid monolayer-cellulose sheets. The permeability coefficient of the thin lipid membrane was estimated by removing the effect of two outer cellulose sheets, and this permeability was found to be larger than those of other model membranes of a lipid bilayer, indicating that the present lipid membrane is not a perfect single lipid bilayer. However, certain experimental evidence suggests that the bulk of the phospholipids formed a bilayer between the two cellulose sheets. Since this lipid membrane is particularily stable, larger membranes can be prepared by the present method than other planar bilayer membranes of lipid, which are usually constructed inside a pin hole in a thin teflon sheet.

Cell Membrane Permeability↗

Role of the putative membrane-bound endo-1,4-beta-glucanase KORRIGAN in cell elongation and cellulose synthesis in Arabidopsis thaliana.

A temperature-sensitive, elongation-deficient mutant of Arabidopsis thaliana was isolated. At the non-permissive temperature of 31 degrees C, the mutation impaired tissue elongation; otherwise, tissue development was normal. Hypocotyl cells that had established cell walls at 21 degrees C under light-dark cycles ceased elongation and swelled when the mutant was shifted to 31 degrees C and darkness, indicating that the affected gene is essential for cell elongation. Analysis of the cell walls of mutant plants grown at 31 degrees C revealed that the cellulose content was reduced to 40% and the pectin content was increased to 162% of the corresponding values for the wild type grown at the same temperature. The increased amounts of pectin in the mutant were bound tightly to cellulose microfibrils. No change in the content of hemicellulose was apparent in the 31 degrees C-adapted mutant. Field emission-scanning electron microscopy suggested that the structure of cellulose bundles was affected by the mutation; X-ray diffraction, however, revealed no change in the crystallite size of cellulose microfibrils. The regeneration of cellulose microfibrils from naked mutant protoplasts was substantially delayed at 31 degrees C. The recessive mutation was mapped to chromosome V, and map-based cloning identified it as a single G-->A transition (resulting in a Gly(429)-->Arg substitution) in KORRIGAN, which encodes a putative membrane-bound endo-1,4-beta-glucanase. These results demonstrate that the product of this gene is required for cellulose synthesis.

Arabidopsis↗

Cellulose synthesis is required for deposition of reticulate wall ingrowths in transfer cells.

Despite the recognized physiological importance of transfer cells, little is known about how these specialized cells achieve localized deposition of cell wall material, leading to amplification of plasma membrane surface area and enhanced membrane transport capacity. This study establishes that cellulose synthesis is a key early factor in the construction of 'reticulate' wall ingrowths, an elaborate but common form of localized wall deposition characteristic of most transfer cells. Using field emission scanning electron microscopy, wall ingrowths were first visible in epidermal transfer cells of Faba bean cotyledons as raised 'patches' of disorganized and tangled cellulosic material, and, from these structures, ingrowths emerged via further deposition of wall material. The cellulose biosynthesis inhibitors 2,6-dichlorobenzonitrile and isoxaben both caused dramatic reductions in the number of cells depositing wall ingrowths, altered wall ingrowth morphology and visibly disrupted microfibril structure. The restriction of cellulose deposition to discrete patches suggests a novel mechanism for cellulose synthesis in this circumstance. Overall, these results implicate a central role for cellulose synthesis in reticulate wall ingrowth morphology, especially at the initial stage of ingrowth formation, possibly by providing a template for the self-assembly of wall polymers.

Benzamides↗

An alternative dressing material for the split-thickness skin graft donor site: oxidized regenerated cellulose.

The split-thickness skin graft (STSG) donor sites have been treated with various and plenty of dressing techniques and materials. An ideal STSG donor site dressing should have antibacterial, hemostatic, and promoting epidermal healing properties. We have performed a prospective study to evaluate the effect of the oxidized regenerated cellulose on STSG donor site healing. Between January 2002 and January 2005, 40 patients who were operated in any kind of reconstructive operations with STSG donor sites were included in the study. One half of the wound was covered with oxidized regenerated cellulose and the other half of the same wound of the same patient was covered with fine mesh gauze treated with Furacin (nitrofurazone). The patients were grouped into 2 depending on the dressing technique: group I, semiclosed and group II, closed. The wounds were evaluated for healing time, infection, pain perception of the patient, and final esthetic results. The oxidized regenerated cellulose side of the group I was healed in a mean of 6.5 +/- 0.51 days; in group II, 5.4 +/- 0.50 days (range, 5-6 days). The fine mesh gauze treated with Furacin in group I was healed in a mean of 9.9 +/- 0.97 days (range, 8-11 days); in group II, 8.4 +/- 0.99 days (range, 7-10 days). There was a statistical significance between the oxidized regenerated cellulose side and the fine mesh gauze side (P < 0.001) in group I and group II separately. The difference between group I and group II was statistically significant in the oxidized regenerated cellulose side (P < 0.001), and the difference between group I and group II was statistically significant in the fine mesh gauze side (P < 0.005). The antibacterial, hemostatic, and absorbable property of the oxidized regenerated cellulose could ensure the utilization as an alternative STSG donor site dressing, especially because the positive influence over the wound healing was proven.

Absorption↗

The Pseudomonas fluorescens SBW25 wrinkly spreader biofilm requires attachment factor, cellulose fibre and LPS interactions to maintain strength and integrity.

The wrinkly spreader (WS) isolate of Pseudomonas fluorescens SBW25 forms a substantial biofilm at the air-liquid interface. The biofilm is composed of an extracellular partially acetylated cellulose-fibre matrix, and previous mutagenesis of WS with mini-Tn5 had identified both the regulatory and cellulose-biosynthetic operons. One uncharacterized WS mutant, WS-5, still expressed cellulose but produced very weak biofilms. In this work, the mini-Tn5 insertion site in WS-5 has been identified as being immediately upstream of the tol-pal operon. Like Tol-Pal mutants of other Gram-negative bacteria, WS-5 showed a "leaky-membrane" phenotype, including the serendipitous ability to utilize sucrose, increased uptake of the hydrophilic dye propidium iodide, and the loss of lipopolysaccharide (LPS) expression. WS-5 cells were altered in relative hydrophobicity, and showed poorer recruitment and maintenance in the biofilm than WS. The WS-5 biofilm was also less sensitive to chemical interference during development. However, growth rate, cellulose expression and attachment were not significantly different between WS and WS-5. Finally, WS-5 biofilms could be partially complemented with WS-4, a biofilm- and attachment-deficient mutant that expressed LPS, resulting in a mixed biofilm with significantly increased strength. These findings show that a major component of the WS air-liquid biofilm strength results from the interactions between LPS and the cellulose matrix of the biofilm--and that in the WS biofilm, cellulose fibres, attachment factor and LPS are required for biofilm development, strength and integrity.

Bacterial Adhesion↗

Cellulose synthesis is coupled to cell cycle progression at G1 in the dinoflagellate Crypthecodinium cohnii.

Cellulosic deposition in alveolar vesicles forms the "internal cell wall" in thecated dinoflagellates. The availability of synchronized single cells, the lack of secondary deposition, and the absence of cellulosic cell plates at division facilitate investigation of the possible roles of cellulose synthesis (CS) in the entire cell cycle. Flow cytograms of cellulosic contents revealed a stepwise process of CS in the dinoflagellate cell cycle, with the highest rate occurring at G(1). A cell cycle delay in G(1), but not G(2)/M, was observed after inhibition of CS. A cell cycle inhibitor of G(1)/S, but not G(2)/M, was able to delay cell cycle progression with a corresponding reduction of CS. The increase of cellulose content in the cell cycle corresponded well to the expected increase of surface area. No differences were observed in the cellulose to surface area ratio between normal and fast-growing G(1) cells, implicating the significance of surface area in linking CS to the coupling of cell growth with cell cycle progression. The coupling of CS to G(1) implicates a novel link between CS and cell cycle control, and we postulate that the coupling mechanism might integrate cell wall integrity to the cell size checkpoint.

Animals↗