Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Caproates”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30Linked to original sources
PubMed1987

Evaluation of vaginal malodor and efficacy of treatment by high performance ion exchange chromatography.

High performance ion exchange chromatography was employed to evaluate the presence of short chain organic acids in the vaginal fluid of a woman troubled by persistent foul vaginal odor, but who did not have typical bacterial vaginosis. The vaginal secretions from this patient were collected on a weighed cotton swab and eluted into water and extracted by acidified ether. Salts of the acids were back-extracted into aqueous solution and chromatographed on an H-form resin column and compared to commercially available standards. A strikingly large amount of caproic acid was found. The caproic acid disappeared after metronidazole therapy, and a subsequent follow-up chromatogram showed a predominance of lactic acid. The success of this technique in evaluating the present case suggests that such a method may prove useful in other types of vaginal infection.

Adult↗
PubMed1979

Identification of 5-hydroxyhexanoic acid in the urine of twin siblings with a Reye's-like syndrome associated with dicarboxylic aciduria and hypoglycaemia and with similarities to Jamaican vomiting sickness.

Twin male infant siblings who presented in Harrow, UK, with a Reye's-like syndrome associated with profound hypoglycaemia, vomiting, diarrhoea, coma and death in one child, with dicarboxylic aciduria, and similarities to Jamacian vomiting sickness (hypoglycin toxicity) have been shown to excrete large amounts of a previously unrecorded urinary organic acid. This has been identified as 5-hydroxyhexanoic acid by gas chromatography mass spectrometry using a synthesized standard. Concentrations observed were 340 and 330 mg g-1 creatinine in the two patients. The metabolic precursor of the urinary acid is suggested to be hex-4-enoic acid, a probable chemical toxin closely related to the active organic acid metabolite of hypoglycin. The possibility of omega - 1 oxidation of hexanoic acid to 5-hydroxyhexanoic acid in these and other patients with dicarbocylic aciduris is also discussed.

Caproates↗
PubMed1980

Profiles in altered metabolism. II--(omega -- 1)-hydroxyacid excretion in a case of episodic hypoglycemia.

A patient with recurrent severe hypoglycemia resembling Reye's syndrome was found to have large accumulations of omega -- 1 hydroxy and keto acids in serum and urine that persisted following clinical recovery. A deficiency of mitochondrial medium chain acyl CoA dehydrogenase activity is proposed on the basis of evidence obtained using gas chromatographic mass spectrometric techniques. Analytical data is presented that will allow the recognition of ths variant presenting in other patients.

Acute Disease↗
PubMed1985

Analysis of (1-13C)leucine and (13C)KIC in plasma by capillary gas chromatography/mass spectrometry in protein turnover studies.

The methods used for the determination of the concentration and isotope enrichment of (1-13C)leucine and its metabolite (13C) alpha-ketoisocaproic acid (KIC) in plasma for the study of whole-body protein turnover are described. Leucine was analysed as its N-heptafluorobutyryl isobutyl ester and KIC as its quinoxalinol-TMS derivative, both by chemical ionization selected ion monitoring gas chromatography/mass spectrometry (GC/MS). The sensitivity of the leucine assay was improved 30 times by monitoring the negative ions under the conditions described. The coefficient of variation for enrichment and concentration measurements were 0.5% and 2%, respectively, with a minimum detectable enrichment of 0.1 at% excess for both assays.

Caproates↗
PubMed2007

The formation of byproducts in the autoxidation of cyclohexane.

In this work, a complementary experimental and theoretical approach is used to unravel the formation of byproducts in the autoxidation of cyclohexane. The widely accepted vision that cyclohexanone would be the most important precursor of undesired products was found inconsistent with several experimental observations. However, the propagation reaction of cyclohexyl hydroperoxide, which we recently put forward as the missing source of cyclohexanol and cyclohexanone, is now unambiguously identified also as the dominant path leading to byproducts. Indeed, this overlooked reaction produces large amounts of cyclohexoxy radicals, able to ring-open via a beta-C--C cleavage to omega-formyl radicals. The pathway by which these radicals are converted into the observed and quantified byproducts is derived in this work. In this liquid-phase reaction, solvent cages were found very important, steering the fate of nascent species.

Adipates↗
PubMed1992

Enantioselectivity in the induction of peroxisome proliferation by 2-ethylhexanoic acid.

The stereoselectivity of the peroxisome proliferation potency of 2-ethylhexanoic acid (2-EHA), a metabolite of the plasticizer di-(2-ethylhexyl) adipate, was investigated in vitro. The enantiomers of 2-EHA were prepared via the semipreparative HPLC resolution of their diastereoisomeric (+)-(R)-1-phenylethylamine derivatives and the subsequent hydrolytic cleavage. Monolayers of hepatocytes were incubated 3 days with solution of (-)-(R), (+)-(S), and (+/-)-2-EHA. The peroxisome proliferation potency was measured by means of determination of the peroxisomal palmitoyl coenzyme A oxidation. The theoretical induction component due to each enantiomer were calculated from the experimental data considering the enantiomeric purities of the acids. The (+)-(S)-enantiomer was found to be the most potent inducer e.g., the eutomer, while the (-)-(R) was the distomer. The eudismic ratio was about 1.6 and the racemic mixture exhibited an intermediary potency. These results, obtained in vitro in conditions avoiding confounding factors such as pharmacokinetics, suggest that the peroxisome proliferation induced by 2-ethylhexanoic acid is a stereoselective phenomenon.

Animals↗
PubMed1994

Comparison of the potencies of (+)- and (-)-2-ethylhexanoic acid in causing peroxisome proliferation and related biological effects in mouse liver.

Male C57BL/6 mice were exposed to 1% (w/w) (+)- or (-)-2-ethylhexanoic acid or an equimolar mixture of these enantiomers in their diet for 4 or 10 days. A significant increase in liver weight and a 2- to 3-fold increase in the protein content of the mitochondrial fraction were seen in all cases. Peroxisomal palmitoyl-CoA oxidation was increased 2- to 3.5-fold after 4 days of treatment and 4- to 5-fold after 10 days, while the corresponding increases in peroxisomal lauroyl-CoA oxidase activity were 2- to 3-fold and 9- to 12-fold, respectively. Peroxisomal catalase activity was unchanged, whereas the microsomal and cytosolic activities were increased 2- to 3-fold and 6- to 16-fold, respectively. These treatments also induced microsomal omega-hydroxylation of lauric acid 7-fold and soluble epoxide hydrolase activity in the mitochondrial and cytosolic fractions, as well as microsomal epoxide hydrolase activity about 50-100%. The only significant differences observed between the effects of (+)-2-ethylhexanoic acid and its (-)-enantiomer were on peroxisomal palmitoyl-CoA oxidation and lauroyl-CoA oxidase activity after 4 days of treatment. In both these cases the (+)-enantiomer resulted in increases which were 50-75% greater than those seen with the (-)-form.

Animals↗
PubMed2006

Use of triplet excited States for the study of drug binding to human and bovine serum albumins.

The triplet excited states of (S)- and (R)-flurbiprofen (FBP) have been used as reporters for the microenvironments experienced within the binding sites of human and bovine serum albumins. Regression analysis of triplet decay provides valuable information on the degree of protection that these excited states are afforded from attack by a second FBP molecule, oxygen, or other reagents. The multiexponential fitting of these decays can be satisfactorily correlated with the distribution of the drug among the two binding sites and its presence as the noncomplexed form in the bulk solution. This assignment has been confirmed by using (S)-ibuprofen or capric acid as selective site II replacement probes. Triplet lifetimes and site occupancy are sensitive to the type of serum albumin employed (human versus bovine). Finally, the binding behaviour of (S)- and (R)-FBP exhibits little stereoselectivity.

Animals↗
PubMed1987

Mycotoxins in cereal grain. Part 12. Contamination with ochratoxin A and penicillic acid as indicator of improper storage of cereal grain.

Formation of ochratoxin A and penicillic acid in wheat kernels at 6 moisture levels: 15, 18, 21, 24, 27 and 30% at 15 degrees C has been examined during 4 months of storage. The minimum time for formation of significant amount (0.5-1 mg/kg) of ochratoxin A and penicillic acid (6-8 mg/kg) in stored grain has been found for the various water contents as follows: 18%-16 weeks, 21%-6 weeks, 24% and more - 2 weeks. At 15% of moisture content formation of ochratoxin A and penicillic acid was not observed until 4 months of storage.

Caproates↗
PubMed2003

Preparation of macroporous biodegradable poly(L-lactide-co-epsilon-caprolactone) foams and characterization by mercury intrusion porosimetry, image analysis, and impedance spectroscopy.

Two poly(L-lactide-co-epsilon-caprolactone) random copolymers containing 5 and 40 mol % of epsilon-CL, namely P(LA-co-CL(5)) and P(LA-co-CL(40)), respectively, have been made macroporous by freeze-drying solutions in dimethylcarbonate. Most of the freeze-dried foams, prepared by varying polymer concentration and cooling rate, exhibited two main pore populations: (1). longitudinally oriented tube-like macropores with diameters >or=100 microm, and (2). interconnected micropores (10-100 microm). Pore characteristics, including macropore density, mean diameter, and interdistance, as well as micropore density, area, and shape, were determined by image analysis of scanning electron micrographs in order to study the influence of processing and formulation parameters on foam structure and properties. The pore orientation and the 3-D texture also were studied by image analysis and impedance spectroscopy. In the case of the P(LA-co-CL(5)), the macropore diameter increased with the cooling rate while the micropore diameter decreased. The micropores also became more circular when the cooling rate was increased. The pore size and morphology of the P(LA-co-CL(40)) were quite unchanged by varying the cooling rate. All the other conditions being the same, the P(LA-co-CL(5)) foams were better organized than the P(LA-co-CL(40)) foams, and pore orientation was improved at the higher cooling rate. Pore size and morphology also can be controlled by changing the polymer concentration (Cp), as we showed by studying P(LA-co-CL(5)) foams prepared by freeze-drying solutions in the 1-10 w/v % Cp range. Macropore density, average diameter, and interdistance of P(LA-co-CL(5)) foams increased with Cp, but the micropore characteristics remained almost unchanged no matter the Cp. The reliability of the characterization methods has been discussed, with special attention to mercury intrusion porosimetry, which is used primarily for measurement of pore volume and pore size distribution. However, this technique is reported here as a destructive and unreliable method for the characterization of fragile P(LA-co-CL(40)) foams. This study shows that image analysis and impedance spectroscopy can give reliable information relative to the pore morphology and anisotropy of freeze-dried foams.

Biocompatible Materials↗
PubMed2004

Long-term regeneration of the rat sciatic nerve through a biodegradable poly(DL-lactide-epsilon-caprolactone) nerve guide: tissue reactions with focus on collagen III/IV reformation.

Long-term studies on nerve-guide regeneration are scarce. Therefore, in rats, long-term (16 months) sciatic nerve regeneration through poly(DL-lactide-epsilon-caprolactone) [poly(DLLA-epsilon-CL)] nerve guides was studied and compared with the nonoperated control side. Poly(DLLA-epsilon-CL) degradation and possible long-term foreign body reaction against poly(DLLA-epsilon-CL) nerve guides, as well as the distribution of both collagen type III and IV were studied. In vivo poly(DLLA-epsilon-CL) studies have been performed before but not for such long time points; also, a detailed analysis of collagen III/IV has not been presented before. The results demonstrate that biodegradable poly(DLLA-epsilon-CL) nerve guides yield good nerve regeneration and collagen III/IV deposition relative to the anatomy of the control side. Regenerated nerve showed almost similar collagen type III/IV distribution patterns as compared with the nonoperated control side, although the delineation of matrix was clearer in the control side. The relative amount of collagen III and IV immunostaining in nerve cross-sections did not, however, differ between the control nerve tissue and the operated side after 16 months. After 16 months of implantation, however, some very small fragments of biomaterial could still be found on the edge of the epineurium of the regenerated nerve, indicating remnants of a secondary foreign body reaction. The biomaterial fragments and foreign body reaction did not influence the nerve regeneration process after 16 months. Biodegradable poly(DLLA-epsilon-CL) nerve guides are useful for long-term bridging of short peripheral nerve gaps.

Animals↗
PubMed2004

Degradation and cell culture studies on block copolymers prepared by ring opening polymerization of epsilon-caprolactone in the presence of poly(ethylene glycol).

Poly(epsilon-caprolactone) (PCL) and its block copolymers with poly(ethylene glycol) (PEG) were prepared by ring-opening polymerization of epsilon-caprolactone in the presence of ethylene glycol or PEG, using zinc metal as catalyst. The resulting polymers were characterized by various analytical techniques such as (1)H NMR, SEC, DSC, IR, X-ray, ESEM, and CZE. PCL/PEG copolymers with long PCL chains presented the same crystalline structure as PCL homopolymer, whereas PEG-bearing short PCL blocks retained the crystalline structure of PEG and exhibited an amphiphilic behavior in aqueous solutions. Degradation of PCL and PCL/PEG diblock and triblock copolymers was realized in a 0.13 M, pH 7.4 phosphate buffer at 37 degrees C. The results indicated that the copolymers exhibited higher hydrophilicity and degradability compared with the PCL homopolymer. Large amounts of PEG were released from the bulk after 60 weeks' degradation. In vitro cell culture studies were conducted on scaffolds manufactured via solid free form fabrication by using primary human and rat bone marrow derived stromal cells (hMSC, rMSC). Light, scanning electron, and confocal laser microscopy, as well as immunocytochemistry, showed cell attachment, proliferation, and extracellular matrix production on the surface, as well as inside the scaffold architecture. Copolymers showed better performance in the cell culture studies than the PCL homopolymer.

Animals↗
PubMed2005

Effects of surface modification of poly (3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) on physicochemical properties and on interactions with MC3T3-E1 cells.

As a new member of the polyhydroxyalkanoate (PHA) family, poly (3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) has better mechanical and processible properties than poly (3-hydroxybutyrate) (PHB). Still, it is difficult to introduce functional groups to the polyester carbon chain of PHBHHx, which restricts the modification of PHBHHx for a wide range. In this study, a procedure for the modification of the surface of PHBHHx films under strongly alkaline conditions was described. Through this kind of modification, carboxyl and hydroxyl groups were introduced to the surface and the total surface free energy was increased, which was mainly due to the increased polar components. Meanwhile, this process makes the surface rougher, resulting in larger total surface areas. After mineralization in simulated body fluids (SBFs), the apatite nucleation and growth on the surface-hydrolyzed PHBHHx films were significantly faster than on the unmodified PHBHHx films. This phenomenon should have a close relationship with the increased carboxyl and hydroxyl groups. The physicochemical properties also influenced the cell response to PHBHHx films. Compared to unmodified PHBHHx, fibronectin adsorption, and MC3T3-E1 cell attachment and proliferation were significantly greater on surface-hydrolyzed PHBHHx, which may be due to the increased surface free energy and rougher surface. Therefore, surface hydrolysis makes PHBHHx more suitable for osteoblast cell response and for application in bone-tissue engineering.

3-Hydroxybutyric Acid↗
PubMed2007

Pores in synthetic nerve conduits are beneficial to regeneration.

Current opinion holds that pores in synthetic nerve guides facilitate nerve regeneration. Solid factual support for this opinion, however, is absent; most of the relevant studies assessed only morphological parameters and results have been contradictory. To evaluate the effect of pores, the rat sciatic nerve was either autografted or grafted with nonporous, macroporous (10-230 mum), and microporous (1-10 microm) biodegradable epsilon-caprolactone grafts. Twelve weeks later, the grafted nerves were resected, and the electrophysiological properties were determined in vitro. Subsequently midgraft-level sections were inspected, and peroneal nerve sections were evaluated morphometrically. Finally, the gastrocnemic and tibial muscle morphometrical properties were quantified. The microporous nerve graft performed much better than the nonporous and macroporous grafts with respect to most parameters: it was bridged by a free floating bundle that contained myelinated nerve fibers, there were more nerve fibers present distal to the graft, the electrophysiological response rate was higher, and the decrease in muscle cross-sectional area was markedly smaller. Hence, the present study demonstrates the beneficial effect of synthetic nerve guide pores on nerve regeneration, although with the caveat that not pores per se, but only small (1-10 microm) pores were effective.

Absorbable Implants↗
PubMed2005

Mechanical properties and in vitro degradation of bioresorbable fibers and expandable fiber-based stents.

Bioresorbable polymeric support devices (stents) are being developed in order to improve the biocompatibility and drug reservoir capacity of metal stents, as well as to offer a temporary alternative to permanent metallic stents. These temporary devices may be utilized for coronary, urethral, tracheal, and other applications. The present study focuses on the mechanical properties of bioresorbable fibers as well as stents developed from these fibers. Fibers made of poly(L-lactide) (PLLA), polydioxanone (PDS), and poly(glycolide-co-epsilon-caprolactone) (PGACL) were studied in vitro. These fibers combine a relatively high initial strength and modulus together with sufficient ductility and flexibility, and were therefore chosen for use in stents. The effect of degradation on the tensile mechanical properties and morphology of these fibers was examined. The expandable stents developed from these fibers demonstrated excellent initial radial compression strength. The PLLA stents exhibited excellent in vitro degradation resistance and can therefore support body conduits such as blood vessels for prolonged periods of time. PDS and PGACL stents can afford good support for 5 and 2 weeks, respectively, and can therefore be utilized for short-term applications. The degradation resistance of the stents correlates with the profile of mechanical property deterioration of the corresponding bioresorbable fibers.

Absorbable Implants↗