Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “TM3”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources

Thermal and optical properties of Tm3+ doped tellurite glasses.

Ultraviolet, visible (UV/VIS) and differential thermal analysis (DTA) measurements were carried out in order to investigate the optical and thermal properties of various 0.5 mol.% Tm2O3 containing (1 - x)TeO2 + xLiCl glasses in molar ratio. The samples were prepared by fusing the mixture of their respective reagent grade powders in a platinum cricuble at 750 degrees C for 30 min. DTA curves taken in the 23-600 degrees C temperature range with a heating rate of 10 degrees C/min reveal a change in the value of the glass transition temperature, Tg, while melting was not observed for the glasses containing LiCl content less than 50 mol.%. These glasses were found to be moisture-resistant. However, the glasses with LiCl content higher than 50 mol.%, in which a melting peak was observed at Tc = 401 degrees C, were moisture-sensitive. Absorption measurements in the UV/VIS region of the glasses without Tm2O3 content show that the Urbach cutoff occurs at about 320 nm and, is relatively independent of the LiCl content. Six absorption bands were observed in the Tm2O3 doped glasses corresponding to the absorption of the 1G4, 3F2, 3F3 and 3F4, 3H5 and 3H4 levels from the 3H6 ground level of Tm3+ ions. The spectra also show that the integrated absorption cross-section of each band depends on the glass composition. Judd-Ofelt theory was used to determine the Judd-Ofelt parameters as well as the radiative transition probabilities for the metastable levels of Tm3+ ions in (0.3)LiCl + (0.7) TeO2: 0.01 Tm2O3 glass which is moisture-resistant.

Crystallization↗

Thermal properties and optical transition probabilities of Tm3 + doped TeO2-WO3 glass.

Glasses with the composition of (1 - x)TeO2 + (x)WO3, where x = 0.15, 0.25 and 0.3 were prepared and, their thermal and absorption measurements were carried out. Differential thermal analysis (DTA) curves taken in the 23-600 degrees C temperature range with a heating rate of 10 degrees C/min reveal a change in the value of the glass transition temperature, Tg, while crystallization was not observed for the glasses containing a WO3 content of more than 15 mol%. All the glasses were found to be moisture-resistant. The absorption bands corresponding to the absorption of the 1G4, 3F2, 3F3 and 3F4, 3H5 and 3H4 levels from the 3H6 ground level of the Tm3+ ion were observed in the optical absorption spectra. Integrated absorption cross-sections of each band except that of 3H5 level was found to vary with the glass composition. Judd-Ofelt analysis was carried out for the samples doped with 1.0 mol% Tm2O3. The omega2 parameter shows the strongest dependence on the host composition and it increases with the increasing WO3 amount. The value of omega4 increases rather slowly while the value of omega6 is practically independent of the composition. The strong dependence of the parameter omega2 indicates that this parameter is related to the structural change and the symmetry of the local environment of the Tm3+ ions in this glass.

Differential Thermal Analysis↗

Identification and characterization of arginine vasopressin receptors in the clonal murine Leydig-derived TM3 cell line.

Specific arginine vasopressin (AVP) binding sites were identified and characterized using Leydig cell membranes prepared from a clonal murine Leydig-derived cell line, TM3. 3H-AVP binding data analyses demonstrated that the radioligand binds to a high affinity, low capacity, homogeneous class of sites with a dissociation constant of 0.5 nM. Characterization of these AVP binding sites included competition studies. Displacement of 3H-AVP binding with high affinity by unlabelled AVP, LVP and the V1 antagonist, d(CH2)5Tyr(Me)AVP, indicated that the Leydig cell AVP receptor is of the V1 type. Furthermore, AVP did not increase adenylate cyclase activity in TM3 membranes, a finding consistent with the V1 type of AVP receptor. No competition with 3H-AVP was found with the V2 agonist, dVDAVP, or the selective oxytocin agonist, [Thr4,Gly7]oxytocin. No specific binding for oxytocin was found in Leydig cell membranes. No specific binding for either 3H-AVP or 3H-oxytocin was observed in membranes prepared from the Sertoli cell line or peritubular cell line. These findings indicate that murine Leydig cells have specific AVP binding sites of the V1 type. These AVP sites are not coupled to the adenylate cyclase system.

Animals↗

High-peak-power operation of a Q-switched Tm3+-doped silica fiber laser operating near 2 microm.

A peak output power of greater than 4.1 kW and a pulse duration at FWHM of 150 ns have been obtained in a Q-switched Tm3+-doped silica fiber laser in the wavelength region near 2 microm when the laser was pumped with a Nd:YAG laser operating at 1.319 microm. An acousto-optic modulator was used as a Q-switching element and operated at repetition rates of as much as 30 kHz. A core diameter of 17 microm was used to increase the laser gain volume, permitting high-pump-power absorption and an output of high pulse energy and peak power. Stimulated Brillouin scattering was directly observed in the output pulse, and as much as 10 orders of stimulated Brillouin scattering was recorded. This is the first report to the authors' knowledge of high-peak-power operation of a Tm3+-fiber laser.

Journal Article↗

784-nm amplified spontaneous emission from Tm3+-doped fluoride glass fiber pumped by an 1120-nm fiber laser.

We report 784-nm (1G4 --> 3H5 transition) amplified spontaneous emission (ASE) from Tm3+-doped fluoride (ZrF4-BaF2-LaF3-AlF3-NaF) glass fiber pumped by an 1120-nm fiber laser. To our best knowledge, this is the first report of 784-nm (1G4 --> 3H5 transition) ASE in a Tm3+-doped fluoride fiber laser. Its effects on a 480-nm (1G4 --> 3H6 transition) blue laser were also discussed.

Journal Article↗

[Spectroscopic characterization of Tm3+ ions in zinc tungstate crystals].

A series of high quality ZnWO4:Tm3+ single crystals were grown with Czochralski method. The concentrations of thulium ions were 0.1, 0.3, 0.5, 0.7 and 1.0 mol%, respectively. When ZnWO4:Tm3+ single crystals were excited by 807 nm laser, the up-conversion luminescence peaks at 486 and 695 nm which corresponded to transitions 1G4-->3H6 and 3F3-->3 H6, respectively, were detected. The intensity of 695 nm luminescence varied with the pump power in a double logarithmic relation whose indexes were 0.8 and 1.1 orders, respectively.

Crystallization↗

[Characterization of novel partial t-haplotypes tM1, tM2, tM3, tM4].

The results of genetic analysis of the effects of four novel partial mouse TM-haplotypes are presented in this work. Fertility and viability of tM/tM homozygotes and tM/t6 compounds, transmission ratio distortion (trd) in males heterozygous for tM, suppression of recombination and taillessness effects were studied. Three novel t-haplotypes tM1,2,4 are viable and heterozygous for these haplotypes males T/tM show low trd (20-30%). Comparison of these data and the t6-haplotype structure suggests that the tM1,2,4-haplotypes were derived as a result of recombination events in the non-inverted T-complex fragment located between two inversions. The tM3-haplotype is semilethal and heterozygous T/tM3 males show the trd equal to that of t6-heterozygotes. Homozygous tM3/tM3 and tM3/t6 male compounds are fertile or subfertile. Potential recombination ways of derivation of tM3 are discussed.

Animals↗

Modelling and mutation studies on the histamine H1-receptor agonist binding site reveal different binding modes for H1-agonists: Asp116 (TM3) has a constitutive role in receptor stimulation.

A modelling study has been carried out, investigating the binding of histamine (Hist), 2-methylhistamine (2-MeHist) and 2-phenylhistamine (2-PhHist) at two postulated agonistic binding sites on transmembrane domain 5 (TM5) of the histamine H1-receptor. For this purpose a conformational analysis study was performed on three particular residues of TM5, i.e., Lys200, Thr203 and Asn207, for which a functional role in binding has been proposed. The most favourable results were obtained for the interaction between Hist and the Lys200/Asn207 pair. Therefore, Lys200 was subsequently mutated and converted to an alanine, resulting in a 50-fold decrease of H1-receptor stimulation by histamine. Altogether, the data suggest that the Lys200/Asn207 pair is important for activation of the H1-receptor by histamine. In contrast, analogues of 2-PhHist seem to belong to a distinct subclass of histamine agonists and an alternative mode of binding is proposed in which the 2-phenyl ring binds to the same receptor location as one of the aromatic rings of classical histamine H1-antagonists. Subsequently, the binding modes of the agonists Hist, 2-MeHist and 2-PhHist and the H1-antagonist cyproheptadine were evaluated in three different seven-alpha-helical models of the H1-receptor built in homology with bacteriorhodopsin, but using three different alignments. Our findings suggest that the position of the carboxylate group of Asp116 (TM3) within the receptor pocket depends on whether an agonist or an antagonist binds to the protein; a conformational change of this aspartate residue upon agonist binding is expected to play an essential role in receptor stimulation.

Amino Acid Sequence↗

Temperature effect on the action of corticotropin-releasing hormone (CRH) on secretion of immunoreactive beta-endorphin (IR beta EP) in TM3 and AtT-20 cell lines.

Testicular function is sensitive to chemical and thermal stresses. To investigate the effects of small temperature changes on CRH-stimulated beta EP release, we employed TM3 cells, a mouse prepubertal Leydig cell line that secretes ir beta EP. To monitor beta EP secretion from these cells we used the reverse hemolytic plaque assay. After 3.5 hr incubation of cells with hormone, the EC50 of the CRH dose-response curve at 34 degrees C and 37 degrees C were 0.1 nM and 1 nM, respectively. For comparison, we also investigated the effect of temperature on CRH-stimulated beta EP release from a non-testicular cell line, AtT-20, a mouse anterior pituitary cell line. Using radioimmunoassay to measure ir beta EP levels in the media of AtT-20 cells, the EC50s for the CRH dose-response curve at 34 degrees C and 37 degrees C were 0.2 nM and 2 nM, respectively, at 1 h. After 3.5 h this temperature dependent difference in EC50 was still observed. These results suggest that CRH receptors or post-receptor actions in Leydig cells and anterior pituitary corticotropes are sensitive to small temperature changes.

Animals↗

Short term regulation of cell-cell communication in TM3 Leydig cells. A perforated patch study.

Determination of the junctional conductance (g(j)) in TM3 Leydig cells by the dual whole cell patch clamp technique (DWCPC) shows that coupling undergoes a rapid and irreversible run down. Addition of ATP or cAMP derivatives to the pipette solution has been shown to prevent this phenomenon in several tissues, but this same treatment is unable to inhibit run down in Leydig cells. Because the run down in junctional conductance may pose serious problems to the interpretation of results, we also measured g(j) by using the double perforated patch clamp technique (DPPT). Access to the cell interior was achieved by adding 200 microgram/ml of nystatin to the pipette solution. With this method, run down in g(j) was greatly reduced, amounting to no more than 5% of the initial value. Exposure of the cells, under DWCPC or DPPT, to dibutyryl cAMP or to tumor promoting agent (TPA) led to a decrease in cell to cell communication. Staurosporine, a PKC inhibitor, increased g(j) and was able to prevent and reverse the uncoupling action of cAMP or TPA. Our results indicate that cell-cell communication in Leydig cells is down regulated by both protein kinases A and C, interacting in a complex manner.

Animals↗

Tryptophan scanning mutagenesis in the TM3 domain of the Torpedo californica acetylcholine receptor beta subunit reveals an alpha-helical structure.

We used tryptophan substitutions to characterize the beta M3 transmembrane domain (betaTM3) of the acetylcholine receptor (AChR). We generated 15 mutants with tryptophan substitutions within the betaTM3 domain, between residues R282W and I296W. The various mutants were injected into Xenopus oocytes, and expression levels were measured by [125I]-alpha-bungarotoxin binding. Expression levels of the M288W, I289W, L290W, and F293W mutants were similar to that of wild type, whereas the other mutants (R282W, Y283W, L284W, F286W, I287W, V291W, A292W, S294W, V295W, and I296W) were expressed at much lower levels than that of wild type. None of these tryptophan mutants produced peak currents larger than that of wild type. Five of the mutants, L284W, F286W, I287W, V295W, and I296W, were expressed at levels <15% of the wild type. I296W had the lowest expression levels and did not display any significant ACh-induced current, suggesting that this position is important for the function and assembly of the AChR. Tryptophan substitution at three positions, L284, V291, and A292, dramatically inhibited AChR assembly and function. A periodicity analysis of the alterations in AChR expression at positions 282-296 of the betaTM3 domain was consistent with an alpha-helical structure. Residues known to be exposed to the membrane lipids, including R282, M285, I289, and F293, were all found in all the upper phases of the oscillatory pattern. Mutants that were expressed at lower levels are clustered on one side of a proposed alpha-helical structure. These results were incorporated into a structural model for the spatial orientation of the TM3 of the Torpedo californica beta subunit.

Acetylcholine↗

Synthesis of colloidal upconverting NaYF4 nanocrystals doped with Er3+, Yb3+ and Tm3+, Yb3+ via thermal decomposition of lanthanide trifluoroacetate precursors.

Upconverting lanthanide-doped nanocrystals were synthesized via the thermal decomposition of trifluoroacetate precursors in a mixture of oleic acid and octadecene. This method provides highly luminescent nanoparticles through a simple one-pot technique with only one preparatory step. The Er3+, Yb3+ and Tm3+, Yb3+ doped cubic NaYF4 nanocrystals are colloidally stable in nonpolar organic solvents and exhibit green/red and blue upconversion luminescence, respectively, under 977 nm laser excitation with low power densities.

Cations↗

Thermoluminescent characteristics of LiKYF5:Pr3+ and KYF4:Tm3 crystals for applications in neutron and gamma dosimetry.

Thermoluminescent (TL) properties of two concentration series lithium potassium yttrium fluoride doped with praseodymium (LiKYF5:Pr3+) and potassium yttrium fluoride doped with thulium (KYF4:Tm3+) have been investigated after gamma and neutron irradiation. The main purpose of this research is to see whether these materials are suitable for gamma and/or neutron dosimetry purposes. It has been found that the compounds of both series are sensitive to 60Co gamma radiation. A maximal TL sensitivity is found for LiKY0.99Pr0.01F5 and KY0.99Tm0.01F4. However, for this doping level the intensity of the TL glow peak is about 7 times less than that for LiF:Mg,Ti (TLD-700). The TL sensitivity to thermal neutrons is relatively higher than that to 60Co photons. No TL sensitivity to fast neutrons was observed.

Crystallization↗

An assessment of the TM3 gas differentiator.

The TM3 Gas differentiator, a simple device introduced to differentiate between nitrous oxide and oxygen, was found to be capable of positively distinguishing between these gases when only they were known to be present. The differentiator gave nearly equal responses to nitrous oxide and carbon dioxide. Cyclopropane, halothane, methoxyflurane, trichloroethylene and nitrogen all produced smaller responses on the differentiator's built-in meter. This apparatus has proved in use to be a practicable and simple method of checking the composition of gases emerging from pipelines.

Anesthesia, Inhalation↗

Proton modulation of recombinant GABA(A) receptors: influence of GABA concentration and the beta subunit TM2-TM3 domain.

Regulation of GABA(A) receptors by extracellular pH exhibits a dependence on the receptor subunit composition. To date, the molecular mechanism responsible for the modulation of GABA(A) receptors at alkaline pH has remained elusive. We report here that the GABA-activated current can be potentiated at pH 8.4 for both alphabeta and alphabeta gamma subunit-containing receptors, but only at GABA concentrations below the EC40. Site-specific mutagenesis revealed that a single lysine residue, K279 in the beta subunit TM2-TM3 linker, was critically important for alkaline pH to modulate the function of both alpha1beta2 and alpha1beta2 gamma2 receptors. The ability of low concentrations of GABA to reveal different pH titration profiles for GABA(A) receptors was also examined at acidic pH. At pH 6.4, GABA activation of alphabeta gamma receptors was enhanced at low GABA concentrations. This effect was ablated by the mutation H267A in the beta subunit. Decreasing the pH further to 5.4 inhibited GABA responses via alphabeta gamma receptors, whereas those responses recorded from alphabeta receptors were potentiated. Inserting homologous beta subunit residues into the gamma2 subunit to recreate, in alphabeta gamma receptors, the proton modulatory profile of alphabeta receptors, established that in the presence of beta2(H267), the mutation gamma2(T294K) was necessary to potentiate the GABA response at pH 5.4. This residue, T294, is homologous to K279 in the beta subunit and suggests that a lysine at this position is an important residue for mediating the allosteric effects of both acidic and alkaline pH changes, rather than forming a direct site for protonation within the GABA(A) receptor.

Binding Sites↗

Specific amino-acid residues in the N-terminus and TM3 implicated in channel function and oligomerization compatibility of connexin43.

To identify signals that convey connexin oligomerization compatibility, we have aligned amino-acid sequences of alpha and beta group connexins (Cx) and compared the physico-chemical properties of each homologous amino-acid residue. Four positions were identified that consistently differed between alpha and beta-type connexins; two are located in the N-terminal domain (P1 and P2, corresponding to residues 12 and 13 of the Cx43 sequence), and two in the third trans-membrane-spanning domain TM3 (P3 and P4, corresponding to residues 152 and 153 of the Cx43 sequence). Replacement of each of these residues in Cx43 (an alpha-type connexin) with the corresponding residues of Cx32 (a beta-type connexin) resulted in the assembly of all variants into gap junctions; however, only the P4 variant was functional, as indicated by lucifer yellow dye transfer assays. The other three variants exerted a moderate to severe dose-dependent, dominant-negative effect on co-expressed wild-type (wt) Cx43 channel activity. Moreover, a significant dose-dependent, trans-dominant inhibition of channel activity was observed when either one of the N-terminal variants was co-expressed with wt Cx32. Assembly analyses indicated that dominant and trans-dominant inhibitory effects appeared to be based on the oligomerization of wt and variant connexins into mixed connexons. Interestingly, the identified N-terminal amino acids coincide with the position of naturally occurring, disease-causing missense mutations of several beta-connexin genes (Cx26, Cx30, Cx31, Cx32). Our results demonstrate that three of the identified discriminative amino-acid residues (positions 12, 13 and 152) are crucial for Cx43 channel function and suggest that the N-terminal amino-acid residues at position 12/13 are involved in the oligomerization compatibility of alpha and beta connexins.

Amino Acid Sequence↗

Tm3+ cladding-doped fiber for selective wavelength filtering in high-power pump lasers.

Scattering and reflection of transmission band power in a fiber amplifier cause increased bit-error rates through multiple path interference (MPI). We report a passive method for reducing MPI contributions from the front facet of a 980-nm fiber-Bragg-grating-stabilized pump laser by use of a Tm3+-doped fiber pigtail between the diode facet and the fiber Bragg grating. Optical return loss in the C band is reduced to below -30 dB.

Journal Article↗

[Optical parameters of Tm3+ in oxyfluoride glass ceramic].

Optical-absorption spectrum of Tm3+ ions in oxyfluoride glass ceramic was measured, from which the measured oscillator strengths were obtained. The Judd-Ofelt intensity parameters omega t (t = 2, 4, 6) were determined by a best fit of the calculated and measured oscillator strengths, the rms deviation was 3.9 x 10(-7). Some predicted spectroscopic parameters of the excited states, like the spontaneous radiative transition rate, radiative lifetime, branching ratio and integrated emission cross section were given using the intensity parameters. The spectroscopic parameters were comparable with some laser materials, and some of them were better.

Ceramics↗