Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Polyhydroxybutyrates”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources

Polyester synthesis in transplastomic tobacco (Nicotiana tabacum L.): significant contents of polyhydroxybutyrate are associated with growth reduction.

The pathway for synthesis of polyhydroxybutyrate (PHB), a polyester produced by three bacterial enzymes, was transferred to the tobacco plastid genome by the biolistic transformation method. The polycistronic phb operon encoding this biosynthetic pathway was cloned into plastome transformation vectors. Following selection and regeneration, the content and structure of plant-produced hydroxybutyrate was analysed by gas chromatography. Significant PHB synthesis was limited to the early stages of in vitro culture. Within the transformants, PHB synthesis levels were highly variable. In the early regeneration stage, single regenerates reached up to 1.7% PHB in dry weight. At least 70% of plant-produced hydroxybutyric acid was proven to be polymer with a molecular mass of up to 2,500 kDa. PHB synthesis levels of the transplastomic lines were decreasing when grown autotrophically but their phb transcription levels remained stable. Transcription of the three genes is divided into two transcripts with phbB being transcribed separately from phbC and phbA. In mature plants even low amounts of PHB were associated with male sterility. Fertility was only observed in a mutant carrying a defective phb operon. These results prove successful expression of the entire PHB pathway in plastids, concomitant, however, with growth deficiency and male sterility.

Blotting, Southern↗

Transgenic Arabidopsis plants can accumulate polyhydroxybutyrate to up to 4% of their fresh weight.

Transgenic Arabidopsis thaliana (L.) Heynh. plants expressing the three enzymes encoding the biosynthetic route to polyhydroxybutyrate (PHB) are described. These plants accumulated more than 4% of their fresh weight (approximately 40% of their dry weight) in the form of PHB in leaf chloroplasts. These very high producers were obtained and identified following a novel strategy consisting of a rapid GC-MS analysis of a large number of transgenic Arabidopsis plants generated using a triple construct, thus allowing the parallel transfer of all three genes necessary for PHB synthesis in a single transformation event. The level of PHB produced was 4-fold greater than previously published values, thus demonstrating the large potential of plants to produce this renewable resource. However, the high levels of the polymer produced had severe effects on both plant development and metabolism. Stunted growth and a loss of fertility were observed in the high-producing lines. Analysis of the metabolite composition of these lines using a GC-MS method that we have newly developed showed that the accumulation of high levels of PHB was not accompanied by an appreciable change in either the composition or the amount of fatty acids. Substantial changes were, however, observed in the levels of various organic acids, amino acids, sugars and sugar alcohols.

Acids↗

Development of a degradable composite for orthopaedic use: in vivo biomechanical and histological evaluation of two bioactive degradable composites based on the polyhydroxybutyrate polymer.

As a direct method for the evaluation of tissue bonding to two polyhydroxybutyrate (PHB) based composites, a mechanical push-out test was performed on implants in the femur of mature Japanese White rabbits. Three composites were tested. The first, a hydroxyapatite/PHB (HA/PHB) composite showed an increase in interfacial shear strength (ISS) up to 8 wk, after which the ISS decreased due to degradation of the implant. The second composite was an HA/glass/PHB (HGP) composite and this gave lower values for the ISS attributed to ion release from the glass causing a soft tissue reaction at the interface. The third composite was a carbon fibre reinforced polysulfone (CFRP) and this showed high interfacial shear strength values, which continued to increase with time. These conclusions were supported by contact microradiography (CMR) and histology which showed enhanced endosteal bone growth for the HA/PHB but for the HGP, no periosteal or endosteal activity was detected. Interposed soft tissue for the HGP composite was difficult to discern, histologically, but it was proposed that this was the reason for the low ISS values. It was concluded that the high ISS values for the carbon fibre control were due to surface morphology allowing deep ingrowth of soft tissue and this was confirmed by SEM.

Animals↗

Development of a degradable composite for orthopaedic use: mechanical evaluation of an hydroxyapatite-polyhydroxybutyrate composite material.

This study evaluates the mechanical properties of a composite material comprising polyhydroxybutyrate with hydroxyapatite added in proportions varying from 0 to 50%. Among the three methods of production, injection moulding was found to result in the most satisfactory mechanical properties. The tensile and compressive strength and the modulus of elasticity of composite produced in this way fell within the range for fresh human bone from different anatomical sites. With the additional advantages of biocompatibility, biodegradability and the potential for piezoelectric stimulation of new local bone formation, it was concluded that the injection-moulded composite material has considerable potential for use in orthopaedic surgery, both as a material to construct certain orthopaedic implants and as an alternative to corticocancellous bone graft.

Biocompatible Materials↗

Mechanistic studies on class I polyhydroxybutyrate (PHB) synthase from Ralstonia eutropha: class I and III synthases share a similar catalytic mechanism.

The Class I and III polyhydroxybutyrate (PHB) synthases from Ralstonia eutropha and Chromatium vinosum, respectively, catalyze the polymerization of beta-hydroxybutyryl-coenzyme A (HBCoA) to generate PHB. These synthases have different molecular weights, subunit composition, and kinetic properties. Recent studies with the C. vinosum synthase suggested that it is structurally homologous to bacterial lipases and allowed identification of active site residues important for catalysis [Jia, Y., Kappock, T. J., Frick, T., Sinskey, A. J., and Stubbe, J. (2000) Biochemistry 39, 3927-3936]. Sequence alignments between the Class I and III synthases revealed similar residues in the R. eutropha synthase. Site-directed mutants of these residues were prepared and examined using HBCoA and a terminally saturated trimer of HBCoA (sT-CoA) as probes. These studies reveal that the R. eutropha synthase possesses an essential catalytic dyad (C319-H508) in which the C319 is involved in covalent catalysis. A conserved Asp, D480, was shown not to be required for acylation of C319 by sT-CoA and is proposed to function as a general base catalyst to activate the hydroxyl of HBCoA for ester formation. Studies of the [(3)H]sT-CoA with wild-type and mutant synthases reveal that 0.5 equiv of radiolabel is covalently bound per monomer of synthase, suggesting that a dimeric form of the enzyme is involved in elongation. These studies, in conjunction with search algorithms for secondary structure, suggest that the Class I and III synthases are mechanistically similar and structurally homologous, despite their physical and kinetic differences.

Acyl Coenzyme A↗

Class III polyhydroxybutyrate synthase: involvement in chain termination and reinitiation.

Polyhydroxybutyrate (PHB) synthase catalyzes the polymerization of (R)-3-hydroxybutyryl-CoA (CoA = coenzyme A) into high molecular weight PHB. Recombinant wild-type (wt) class III synthase from Allochromatium vinosum (PhaCPhaE(Av)), antibodies to this synthase and to PHB, and [(14)C]hydroxybutyryl-CoA (HB-CoA) have been used to detect oligomeric hydroxybutyrate (HB) units covalently bound to the synthase using sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis. Although a distribution of products is typically observed, short (HB)(n)-bound synthases (designated species I) are most prevalent at low substrate to enzyme (S/E) ratios. Species I is similar to (HB)(n)-PhaC(Av) (n = 3-10 at minimum) recently identified using D302A-PhaCPhaE(Av) (Tian, J., Sinskey, A. J., and Stubbe, J. (2005) Biochemistry 44, 1495-1503). Species I is shown to be an intermediate in the elongation process of PHB synthesis in vitro. The reaction catalyzed by the wt synthase in vitro was further studied under two sets of conditions: at high (70000) and low (<200) S/E ratios. At high S/E ratios, kinetic analysis of the reaction of HB-CoA with the wt synthase monitored using antibodies to PhaCPhaE(Av) and Western blotting revealed the disappearance of PhaC(Av) at early time points and its reappearance as the molecular weight of the PHB approached 1.8 MDa. At low S/E ratios, species I was observed to increase with time after complete consumption of all of the HB-CoA. The results from studies under both sets of conditions suggest that an inherent property of the synthase is chain termination and reinitiation.

3-Hydroxybutyric Acid↗

Lipases provide a new mechanistic model for polyhydroxybutyrate (PHB) synthases: characterization of the functional residues in Chromatium vinosum PHB synthase.

Polyhydroxybutyrate (PHB) synthases catalyze the conversion of beta-hydroxybutyryl coenzyme A (HBCoA) to PHB. These enzymes require an active site cysteine nucleophile for covalent catalysis. A protein BLASTp search using the Class III Chromatium vinosum synthase sequence reveals high homology to prokaryotic lipases whose crystal structures are known. The homology is very convincing in the alpha-beta-elbow (with the active site nucleophile)-alpha-beta structure, residues 131-175 of the synthase. A conserved histidine of the Class III PHB synthases aligns with the active site histidine of the lipases using the ClustalW algorithm. This is intriguing as this histidine is approximately 200 amino acids removed in sequence space from the catalytic nucleophile. Different threading algorithms suggest that the Class III synthases belong to the alpha/beta hydrolase superfamily which includes prokaryotic lipases. Mutagenesis studies were carried out on C. vinosum synthase C149, H331, H303, D302, and C130 residues. These studies reveal that H331 is the general base catalyst that activates the nucleophile, C149, for covalent catalysis. The model indicates that C130 is not involved in catalysis as previously proposed [Müh, U., Sinskey, A. J., Kirby, D. P., Lane, W. S., and Stubbe, J. (1999) Biochemistry 38, 826-837]. Studies with D302 mutants suggest D302 functions as a general base catalyst in activation of the 3-hydroxyl of HBCoA (or a hydroxybutyrate acyl enzyme) for nucleophilic attack on the covalently linked thiol ester intermediate. The relationship of the lipase model to previous models based on fatty acid synthases is discussed.

Acyltransferases↗

Mechanism of the polymerization reaction initiated and catalyzed by the polyhydroxybutyrate synthase of Ralstonia eutropha.

Polyhydroxybutyrate (PHB) synthases (polymerases) catalyze the polymerization of the coenzyme A thioester of 3-hydroxybutyrate to PHB. The Ralstonia eutropha PHB synthase purified from recombinant E. coli cells exists in aqueous solution in both monomeric (single subunit) and homodimeric (two subunits) forms in equilibrium. Several lines of evidence suggest that the homodimer is the active form of the synthase. The initial mechanistic model for the polymerization reaction proposed that two different thiol groups form the catalytic site. The cysteine at 319 has been shown to provide one thiol group that is involved in the covalent catalysis, but a second thiol group on the same protein molecule has not yet been identified. It is suggested that cysteines at 319 from each of the two molecules of a homodimer synthase provide two identical thiol groups to jointly form a single catalytic site. To verify this model using the strategy of in vitro reconstitution, heterodimers composed of the wild-type subunit and of the C(319) mutated subunit were constructed and the activities at various ratios of the wild-type subunit to the mutated subunit were measured. The experimental results indicate that the homodimer is the active form of the enzyme, that the heterodimer containing the mutated subunit has no activity, and that a single cysteine is not sufficient for catalysis. Two identical thiol groups from C(319) residues on each subunit of the homodimer are required to form the catalytic site for the initiation and propagation reactions. We further demonstrate that a dimer synthase that has initiated the polymerization reaction (primed synthase) is significantly more stable against dissociation than the unprimed (unreacted) dimer synthase. These two properties explain the nature of lag phenomenon during the in vitro polymerization reaction catalyzed by this enzyme

Catalysis↗

Morphology and ultrastructure of the interface between hydroxyapatite-polyhydroxybutyrate composite implant and bone.

A composite of polyhydroxybutyrate (PHB) polymer, reinforced with synthetic hydroxyapatite (HA) particles, with potential as a bone-analogue material, was examined microscopically using scanning electron microscopy and transmission electron microscopy. These imaging techniques provide the means of understanding and monitoring the morphological and structural behaviour of retrieved implants. Scanning electron microscopy was used to assess the overall mechanism of new bone formation at the implant interface after up to 6 months implantation. This procedure was followed by a detailed ultrastructural examination at lattice plane resolution level, using high resolution electron microscopy and selected area diffraction of the regions showing bone apposition. Fine hydroxyapatite crystallites were found to form at the interface after in vivo implantation into cortical bone.

Journal Article↗

Tramadol encapsulated into polyhydroxybutyrate microspheres: in vitro release and epidural analgesic effect in rats.

BACKGROUND: Controlled release techniques are used to increase the duration of action and decrease the toxicity of drugs. Any controlled release form of tramadol in spinal or epidural blocks has not been studied previously. Tramadol was encapsulated into polyhydroxybutyrate (PHB) microspheres and release kinetics was studied. The epidural analgesic effect of this solution in rats was also compared with free tramadol. METHODS: Controlled release of tramadol from PHB microspheres into 10 ml of phosphate buffer solution at pH 7.4 and 37 degrees C was studied in vitro. In vivo studies were performed in 40 rats. Epidural catheters were placed during general anaesthesia. Rats were randomly allocated into one of the four study groups to receive normal saline, 4 mg of tramadol, PHB microspheres without tramadol, or 4 mg of tramadol encapsulated into PHB microspheres. Analgesia was evaluated with tail flick tests performed at 52.5 +/- 0.5 degrees C before injection and at intervals up to 30 h after injection. Catalepsy and loss of corneal reflexes were considered as signs of supraspinal toxicity. RESULTS: In vitro drug release was observed for more than 6 days. Epidural analgesic effects of tramadol released from PHB microspheres were observed for 21 h, whereas an equal dose of free tramadol was effective for less than 5 h. No signs of toxicity were observed. CONCLUSION: Controlled release of tramadol from PHB microspheres is possible, and pain relief during epidural analgesia is prolonged by this drug formulation compared with free tramadol.

Analgesia, Epidural↗

In vitro evolution of a polyhydroxybutyrate synthase by intragenic suppression-type mutagenesis.

In vitro evolution was applied to obtain highly active mutants of Ralstonia eutropha polyester synthase (PhbC(Re)), which is a key enzyme catalyzing the formation of polyhydroxybutyrate (PHB) from (R)-3-hydroxybutyryl-CoA (3HB-CoA). To search for beneficial mutations for activity improvement of this enzyme, we have conducted multi-step mutations, including activity loss and intragenic suppression-type activity reversion. Among 259 revertants, triple mutant E11S12 was obtained as the most active one via PCR-mediated secondary mutagenesis from mutant E11 with a single mutation (Ser to Pro at position 80), which exhibited reduced activity (as low as 27% of the wild-type level) but higher thermostability compared to the wild-type enzyme. Mutant E11S12 exhibited up to 79% of the wild-type enzyme activity. Mutation separation of E11S12 revealed that the replacement of Phe by Ser at position 420 (F420S), located in a highly conserved alpha/beta hydrolase fold region, of the E11S12 mutant contributes to the improvement of the enzyme activity. A purified sample of the genetically engineered mutant, termed E11S12-1, with the F420S mutation alone was found to exhibit a 2.4-fold increase in specific activity toward 3HB-CoA, compared to the wild-type.

Acyltransferases↗

Novel and economical purification of recombinant proteins: intein-mediated protein purification using in vivo polyhydroxybutyrate (PHB) matrix association.

This work combines two well-established technologies to generate a breakthrough in protein production and purification. The first is the production of polyhydroxybutyrate (PHB) granules in engineered strains of Escherichia coli. The second is a recently developed group of self-cleaving affinity tags based on protein splicing elements known as inteins. By combining these technologies with a PHB-specific binding protein, a self-contained protein expression and purification system has been developed. In this system, the PHB-binding protein effectively acts as an affinity tag for desired product proteins. The tagged product proteins are expressed in E. coli strains that also produce intracellular PHB granules, where they bind to the granules via the PHB-binding tag. The granules and attached proteins can then be easily recovered following cell lysis by simple mechanical means. Once purified, the product protein is self-cleaved from the granules and released into solution in a substantially purified form. This system has been successfully used at laboratory scale to purify several active test proteins at reasonable yield. By allowing the bacterial cells to effectively produce both the affinity resin and tagged target protein, the cost associated with the purification of recombinant proteins could be greatly reduced. It is expected that this combination of improved economics and simplicity will constitute a significant breakthrough in both large-scale production of purified proteins and enzymes and high-throughput proteomics studies of peptide libraries.

Bacterial Proteins↗

A novel thiolase-reductase gene fusion promotes the production of polyhydroxybutyrate in Arabidopsis.

The production of polyhydroxybutyrate (PHB) involves a multigene pathway consisting of thiolase, reductase and synthase genes. In order to simplify this pathway for plant-based expression, a library of thiolase and reductase gene fusions was generated by randomly ligating a short core linker DNA sequence to create in-frame fusions between the thiolase and reductase genes. The resulting fusion constructs were screened for PHB formation in Escherichia coli. This screen identified a polymer-producing candidate in which the thiolase and reductase genes were fused via a 26-amino-acid linker. This gene fusion, designated phaA-phaB, represents an active gene fusion of two homotetrameric enzymes. Expression of phaA-phaB in E. coli and Arabidopsis yielded a fusion protein observed to be the expected size by Western blotting techniques. The fusion protein exhibited thiolase and reductase enzyme activities in crude extracts of recombinant E. coli that were three-fold and nine-fold less than those of the individually expressed thiolase and reductase enzymes, respectively. When targeted to the plastid, and coexpressed with a plastid-targeted polyhydroxyalkanoate (PHA) synthase, the fusion protein enabled PHB formation in Arabidopsis, yielding roughly half the PHB formed in plants expressing individual thiolase, reductase and synthase enzymes. This work represents a first step towards simplifying the expression of the PHB biosynthetic pathway in plants.

Journal Article↗

Production of polyhydroxybutyrate in sugarcane.

We report here the production of the bacterial polyester, polyhydroxybutyrate (PHB), in the crop species sugarcane (Saccharum spp. hybrids). The PHB biosynthesis enzymes of Ralstonia eutropha [beta-ketothiolase (PHAA), acetoacetyl-reductase (PHAB) and PHB synthase (PHAC)] were expressed in the cytosol or targeted to mitochondria or plastids. PHB accumulated in cytosolic lines at trace amounts, but was not detected in mitochondrial lines. In plastidic lines, PHB accumulated in leaves to a maximum of 1.88% of dry weight without obvious deleterious effects. Epifluorescence and electron microscopy of leaf sections from these lines revealed that PHB granules were visible in plastids of most cell types, except mesophyll cells. The concentration of PHB in culm internodes of plastidic lines was substantially lower than in leaves. Western blot analysis of these lines indicated that expression of the PHB biosynthesis proteins was not limiting in culm internodes. Epifluorescence microscopy of culm internode sections from plastidic lines showed that PHB granules were visible in most cell types, except photosynthetic cortical cells in the rind, and that the lower PHB concentration in culm internodes was probably a result of dilution of PHB-containing cells by the large number of cells with little or no PHB. We discuss strategies for producing PHB in mitochondria and mesophyll cell plastids, and for increasing PHB yields in culms.

Acetyl-CoA C-Acyltransferase↗

Spatio-temporal characterization of polyhydroxybutyrate accumulation in sugarcane.

We report here the results from a glasshouse trial of several transgenic sugarcane (Saccharum spp. hybrids) lines accumulating the bacterial polyester polyhydroxybutyrate (PHB) in plastids. The aims of the trial were to characterize the spatio-temporal pattern of PHB accumulation at a whole-plant level, to identify factors limiting PHB production and to determine whether agronomic performance was affected adversely by PHB accumulation. Statistical analysis showed that a vertical PHB concentration gradient existed throughout the plant, the polymer concentration being lowest in the youngest leaves and increasing with leaf age. In addition, there was a horizontal gradient along the length of a leaf, with the PHB concentration increasing from the youngest part of the leaf (the base) to the oldest (the tip). The rank order of the lines did not change over time. Moreover, there was a uniform spatio-temporal pattern of relative PHB accumulation among the lines, despite the fact that they showed marked differences in absolute PHB concentration. Molecular analysis revealed that the expression of the transgenes encoding the PHB biosynthesis enzymes was apparently coordinated, and that there were good correlations between PHB concentration and the abundance of the PHB biosynthesis enzymes. The maximum recorded PHB concentration, 1.77% of leaf dry weight, did not confer an agronomic penalty. The plant height, total aerial biomass and culm-internode sugar content were not affected relative to controls. Although moderate PHB concentrations were achieved in leaves, the maximum total-plant PHB yield was only 0.79% (11.9 g PHB in 1.51 kg dry weight). We combine the insights from our statistical and molecular analyses to discuss possible strategies for increasing the yield of PHB in sugarcane.

Acetyl-CoA C-Acyltransferase↗

Influence of Ammonium Salts and Cane Molasses on Growth of Alcaligenes eutrophus and Production of Polyhydroxybutyrate.

The production of polyhydroxybutyrate (PHB) by Alcaligenes eutrophus DSM 545 was studied in a synthetic medium with 3% glucose at pH 7.0 supplemented with several ammonium substrates and cane molasses. Growth was measured by dry cell weight, and the PHB content was measured by gas chromatography. The effects of ammonium sources such as sulfate, nitrate, phosphate, and chloride salts and those of different ammonium sulfate concentrations were evaluated. The best growth and PHB production were obtained with ammonium sulfate; however, NH(inf4)(sup+) concentrations between 0.5 and 1.5 g/liter showed no significant difference. Ammonium sulfate was therefore used as the sole source of NH(inf4)(sup+) for experiments with cane molasses as the growth activator. Optimal growth and PHB production were obtained with 0.3% molasses. However, the yields of biomass (39 to 48%) and PHB (17 to 26%) varied significantly among the different ammonium substrates and cane molasses concentrations.

Journal Article↗

Biochemical and molecular characterization of the polyhydroxybutyrate depolymerase of Comamonas acidovorans YM1609, isolated from freshwater.

Comamonas acidovorans YM1609 secreted a polyhydroxybutyrate (PHB) depolymerase into the culture supernatant when it was cultivated on poly(3-hydroxybutyrate) [P(3HB)] or poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] as the sole carbon source. The PHB depolymerase was purified from culture supernatant of C. acidovorans by two chromatographic methods, and its molecular mass was determined as 45,000 Da by polyacrylamide gel electrophoresis in the presence of sodium dodecyl sulfate. The enzyme was stable at temperatures below 37 degrees C and at pH values of 6 to 10, and its activity was inhibited by diisopropyl fluorophosphonate. The liquid chromatography analysis of water-soluble products revealed that the primary product of enzymatic hydrolysis of P(3HB) was a dimer of 3-hydroxybutyric acid. Kinetics of enzymatic hydrolysis of P(3HB) film were studied. In addition, a gene encoding the PHB depolymerase was cloned from the C. acidovorans genomic library. The nucleotide sequence of this gene was found to encode a protein of 494 amino acids (M(r), 51,018 Da). Furthermore, by analysis of the N-terminal amino acid sequence of the purified enzyme, the molecular mass of the mature enzyme was calculated to be 48,628 Da. Analysis of the deduced amino acid sequence suggested a domain structure of the protein containing a catalytic domain, fibronectin type III module as linker, and a putative substrate-binding domain. Electron microscopic visualization of the mixture of P(3HB) single crystals and a fusion protein of putative substrate-binding domain with glutathione S-transferase demonstrated that the fusion protein adsorbed strongly and homogeneously to the surfaces of P(3HB) single crystals.

3-Hydroxybutyric Acid↗

Cloning and characterization of the polyhydroxybutyrate depolymerase gene of Pseudomonas stutzeri and analysis of the function of substrate-binding domains.

The extracellular polyhydroxybutyrate (PHB) depolymerase gene (phaZPst) of Pseudomonas stutzeri was cloned and sequenced. phaZPst was composed of 1,728 bp encoding a protein of 576 amino acids. Analyses of the N-terminal amino acid sequence and the matrix-assisted laser desorption/ionization-time-of-flight (MALDI-TOF) mass spectrum of the purified enzyme showed that the mature enzyme consisted of 538 amino acids with a deduced molecular mass of 57,506 Da. Analysis of the deduced amino acid sequence of the protein revealed a domain structure containing a catalytic domain, putative linker region, and two putative substrate-binding domains (SBDI and SBDII). The putative linker region was similar to the repeating units of the cadherin-like domain of chitinase A from Vibrio harveyi and chitinase B from Clostridium paraputrificum. The binding characteristics of SBDs to poly([R]-3-hydroxybutyrate) [P(3HB)] and chitin granules were characterized by using fusion proteins of SBDs with glutathione S-transferase (GST). These GST fusion proteins with SBDII and SBDI showed binding activity toward P(3HB) granules but did not bind on chitin granules. It has been suggested that the SBDs of the depolymerase interact specifically with the surface of P(3HB). In addition, a kinetic analysis for the enzymatic hydrolysis of 3-hydroxybutyrate oligomers of various sizes has suggested that the catalytic domain of the enzyme recognizes at least two monomeric units as substrates.

Amino Acid Sequence↗