Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Lipid Bilayers”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources

Effect of surface treatment on diffusion and domain formation in supported lipid bilayers.

Supported lipid bilayers are widely used as model systems due to their robustness. Due to the solid support, the properties of supported lipid bilayers are different from those of freestanding bilayers. In this article, we examine whether different surface treatments affect the properties of supported lipid bilayers. It will be shown that depending on the treatment method, the diffusion of the lipids can be adjusted approximately threefold without altering the composition. Additionally, as the bilayer-support interaction decreases, it becomes easier to form coexisting liquid-ordered and liquid-disordered domains. The physical/chemical alterations that result from the different treatment methods will be discussed.

Diffusion↗

Dip patch clamp currents suggest electrodiffusive transport of the polyelectrolyte DNA through lipid bilayers.

Planar lipid bilayers formed from monolayers of diphytanoyl lecithin (DPhL) were found to interact with plasmid DNA (5.6 kbp; M(r) = 3.7 x 10(6)) leading to an increase in the conductance of the membrane. The association of DNA with a lipid bilayer greatly facilitates the transport of the small ions of the main salt KCl. The appearance of long-lived current levels, for instance, of 27.6 pA at Vm = +60 mV membrane voltage, where the actual contact (adsorption) is electrophoretically enhanced, suggests a locally conductive DNA/lipid interaction zone where parts of the DNA strand may be transiently inserted in the bilayer, leaving other parts of the DNA probably protruding out from the outer surface of the bilayer. At Vm = -60 mV, where DNA can be electrophoretically moved away from the membrane, the membrane current is practically zero. This current asymmetry is initially also observed at higher voltages, for instance at 200 mV. However, if the voltage sign (Vm = +200 mV) is changed after a transient positive current (approximately 15 pA) was observed, there is also now (at Vm = -200 mV) a finite negative current at the negative membrane voltage. Thus, it appears that at Vm = +200 mV the adsorbed parts of the polyelectrolyte DNA are not only transiently inserted in, but actually also electrophoretically pulled through, the porous zones onto the other membrane side leaving the bilayer structure basically intact. These data provide direct electric evidence for the electrophoretic transport of a highly charged and hydrated macromolecule, probably together with the associated gegen-ions, through the thin hydrophobic film of the lipid bilayer.

Diffusion↗

The reduction in electroporation voltages by the addition of a surfactant to planar lipid bilayers.

The effects of a nonionic surfactant, octaethyleneglycol mono n-dodecyl ether (C12E8), on the electroporation of planar bilayer lipid membranes made of the synthetic lipid 1-pamitoyl 2-oleoyl phosphatidylcholine (POPC), was studied. High-amplitude ( approximately 100-450 mV) rectangular voltage pulses were used to electroporate the bilayers, followed by a prolonged, low-amplitude ( approximately 65 mV) voltage clamp to monitor the ensuing changes in transmembrane conductance. The electroporation thresholds of the membranes were found for rectangular voltage pulses of given durations. The strength-duration relationship was determined over a range from 10 micros to 10 s. The addition of C12E8 at concentrations of 0.1, 1, and 10 microM to the bath surrounding the membranes decreased the electroporation threshold monotonically with concentration for all durations (p < 0.0001). The decrease from control values ranged from 10% to 40%, depending on surfactant concentration and pulse duration. For a 10-micros pulse, the transmembrane conductance 150 micros after electroporation (G150) increased monotonically with the surfactant concentration (p = 0.007 for 10 microM C12E8). These findings suggest that C12E8 incorporates into POPC bilayers, allowing electroporation at lower intensities and/or shorter durations, and demonstrate that surfactants can be used to manipulate the electroporation threshold of lipid bilayers.

Detergents↗

[Interaction between filamentous actin and lipid bilayer causes the increase of syringomycin E channel-forming activity].

The effect of filamentous (F) actin on the channel-forming activity of syringomycin E (SRE) in negatively charged and uncharged bilayer lipid membranes (BLM) was studied. F-actin did not affect the membrane conductance in the absence of SRE. No changes in SRE-induced membrane conductance were observed when the above agents were added to the same side of BLM. However, the opposite side addition of F-actin and SRE provokes a multiple increase in membrane conductance. The similar voltage dependence of membrane conductance, equal values of single channel conductance and the effective gating charge of the channels upon F-actin action suggests that the actin-dependent increase in BLM conductance may result from an increase in the number of opened SRE-channels. BLM conductance kinetics depends on the sequence of SRE and F-actin addition, suggesting that actin-dependent rise of conductance may be induced by BLM structural changes that follow F-actin adsorption. F-actin exerted similar effect on membrane conductance of both negatively charged and uncharged bilayers, as well as on conductance of BLM with high ionic strength bathing solution, suggesting the major role for hydrophobic interactions in F-actin adsorption on lipid bilayer.

Actins↗

The effects of gramicidin on electroporation of lipid bilayers.

The effects of the channel-forming peptide gramicidin D (gD) on the conductance and electroporation thresholds of planar bilayer lipid membranes, made of the synthetic lipid 1-palmitoyl 2-oleoyl phosphatidylcholine (POPC), was studied. High-amplitude ( approximately 200-900 mV) rectangular voltage pulses of 15 ms duration were used to perturb the bilayers and monitor the transmembrane conductance. Electroporation voltage thresholds were found, and conductance was recorded before and after electroporation. Gramicidin was added to the system in peptide/lipid ratios of 1:10, 000, 1:500, and 1:15. The addition of gD in a ratio of 1:10,000 had no effect on electroporation, but ratios of 1:500 and 1:15 significantly increased the thresholds by 16% (p < 0.0001) and 40% (p < 0.0001), respectively. Membrane conductance before electroporation was measurable only after the addition of gD and increased monotonically as the peptide/lipid ratio increased. The effect of gD on the membrane area expansivity modulus (K) was tested using giant unilamellar vesicles (GUVs). When gD was incorporated into the vesicles in a 1:15 ratio, K increased by 110%, consistent with the increase in thresholds predicted by an electromechanical model. These findings suggest that the presence of membrane proteins may affect the electroporation of lipid bilayers by changing their mechanical properties.

Biophysical Phenomena↗

Position of residues in transmembrane peptides with respect to the lipid bilayer: a combined lipid Noes and water chemical exchange approach in phospholipid bicelles.

The model transmembrane peptide P16 (Ac-KKGLLLALLLLALLLALLLKKA-NH2) was incorporated into small unaligned phospholipid bicelles, which provide a 'native-like' lipid bilayer compatible with high-resolution solution NMR techniques. Using amide-water chemical exchange and amide-lipid cross-relaxation measurements, the interactions between P16 and bicelles were investigated. Distinctive intermolecular NOE patterns observed in band-selective 2D-NOESY spectra of bicellar solutions with several lipid deuteration schemes indicated that P16 is preferentially interacting with the 'bilayered' region of the bicelle rather than with the rim. Furthermore, when amide-lipid NOEs were combined with amide-water chemical exchange cross-peaks of selectively 15N-labeled P16 peptides, valuable information was obtained about the position of selected residues relative to the membrane-water interface. Specifically, three main classes were identified. Class I residues lie outside the bilayer and show amide-water exchange cross-peaks but no amide-lipid NOEs. Class II residues reside in the bilayer-water interface and show both amide-water exchange cross-peaks and amide-lipid NOEs. Class III residues are embedded within the hydrophobic core of the membrane and show no amide-water exchange cross-peaks but strong amide-lipid NOEs.

Amides↗

Proton transport through a peptide-tethered bilayer lipid membrane by the H(+)-ATP synthase from chloroplasts measured by impedance spectroscopy.

A lipid membrane was tethered to a gold film by a peptide spacer molecule terminated by a sulfhydryl group. Membranes were formed by fusion of liposomes prepared from egg phosphatidylcholine on self assembled monolayers of the thiolipopeptide Myr-Lys(Myr)-Ser-Ser-Pro-Ala-Ser-Ser-Ala-Ala-Ser-Ala-Cys-amide mixed with mercaptoethanol as a diluent molecule or lateral spacer. These mixed films, although not representing a perfect lipid bilayer, have been shown to retain the activity of incorporated H(+)-ATP synthases from chloroplasts in contrast to films prepared from the pure thiolipopeptide. The activity of the protein was demonstrated by impedance spectroscopy. The resistance decreased due to proton transport across the lipid film, which occurs as a consequence of adenosine triphosphate (ATP) hydrolysis. Several effects previously determined from kinetic measurements of the enzyme reconstituted in liposomes such as saturation with respect to the substrate (ATP), inhibition by venturicidin, activation by a positive potential pulse and increase of the proton current as a function of increasingly negative potentials have been confirmed also for this tethered membrane system. Changes in the impedance spectra due to the addition of ATP were fully reversible.

Chloroplasts↗

Estimates of the intramembrane field through the harmonics of capacitive current in inhomogeneous bilayer lipid membranes.

Intramembrane field gives information about localisation of fixed charges or dipoles inside the lipid bilayer. There is systematic discrepancy between field estimates made by various methods. The possible reason of this discrepancy can be attributed to the misinterpretation of the data in the frames of the methods used. It stands for the method that is based on the compensation of the 2nd harmonic of capacitive current generated due to electrostriction phenomenon if sine voltage is applied to the bilayer. The theoretical grounds of the method mentioned are oversimplified because membrane heterogeneity has not been taken into consideration. The purpose of the work is the analysis of the generation of harmonics of capacitive current in inhomogeneous bilayer if intramembrane charges are located at different depth. The results of the study enable one to determine the position of intramembrane charges. The theoretical methods are used. The bilayer electrostriction induced by the electric field in the presence of intramembrane charges is computed. The intramembrane field depends upon localisation of the charges inside the bilayer like a sine curve; it goes to zero if the charges are located in the centre of the membrane. The charge discreteness affects the value of the compensation voltage due to nonlinearity of the bilayer deformations close to the charge. The probable appendices of outcomes are discussed for problems of intramembrane dye localisation and ion transport in the channel of sodium/potassium ATPase.

Lipid Bilayers↗

Reconstitution of a plasma-membrane H(+)-ATPase into bilayer lipid membrane.

The plasma membrane H(+)-ATPase of Neurospora has been reconstituted into planar lipid bilayer membranes by means of the vesicle-fusion technique described by Finkelstein and his collaborators (Zimmerberg et al., 1980; Cohen et al., 1980, 1984; Akabas et al., 1984). Enzyme was first transferred from isolated plasma membrane fragments into asolectin vesicles by a detergent-dialysis procedure (Perlin et al., 1984). After H(+)-pumping activity had been checked by quenching of acridine orange fluorescence, the vesicles were fused into performed bilayers. Critical features of the fusion process include (i) attachment of the vesicles to the bilayer in the presence of divalent cations (Mg++), and (ii) rapid osmotic swelling, which was enhanced by prior sonication or freeze-thawing of the vesicles, and/or by inclusions of physiologic channels. Enough proton pumps could be thus incorporated into bilayers to achieve ATP-driven, vanadate-sensitive currents of 0.04-0.4 pA. Aqueous solutions of low ionic strength were used to suppress conductance fluctuations due to the channels, and when that precaution was taken, we could demonstrate the proton pump the work against membrane potentials of at least 50 mV.

Acridine Orange↗

Cluster organization of ion channels formed by the antibiotic syringomycin E in bilayer lipid membranes.

The cyclic lipodepsipeptide, syringomycin E, when incorporated into planar lipid bilayer membranes, forms two types of channels (small and large) that are different in conductance by a factor of sixfold. To discriminate between a cluster organization-type channel structure and other possible different structures for the two channel types, their ionic selectivity and pore size were determined. Pore size was assessed using water-soluble polymers. Ion selectivity was found to be essentially the same for both the small and large channels. Their reversal (zero current) potentials with the sign corresponding to anionic selectivity did not differ by more than 3 mV at a twofold electrolyte gradient across the bilayer. Reduction in the single-channel conductance induced by poly(ethylene glycol)s of different molecular weights demonstrated that the aqueous pore sizes of the small and large channels did not differ by more than 2% and were close to 1 nm. Based on their virtually identical selectivity and size, we conclude that large syringomycin E channels are clusters of small ones exhibiting synchronous opening and closing.

Anti-Bacterial Agents↗

Effect of ultrasound on the pH profiles in the unstirred layers near planar bilayer lipid membranes measured by microelectrodes.

A pH shift in the unstirred layers (USLs) near a planar lipid bilayer membrane was induced by the diffusion of acetic acid along a concentration gradient. By means of a microelectrode technique it was shown that ultrasound decreases the thickness of the USL and that this reduction was much more pronounced on the side facing the ultrasound transducer than on the opposite side of the membrane. The effect depending on sound frequency and pressure is caused by the unidirectional fluid flow built up between transducer surface and membrane, the so-called quartz wind. Theoretical considerations based on the equations of the acoustic streaming near interfaces combined with the diffusion equation allow to predict the thickness of the USL if the sound field parameters are known.

Acetates↗

Improvement of the quality of self assembled bilayer lipid membranes by using a negative potential.

Self-assembled lipid bilayer membranes (s-BLMs) on the tip of Teflon-coated silver electrodes were formed according to the T. Tien method. Their formation process and properties were investigated by capacitance and voltage current cycle measurements. The stability of the membranes was improved and defects were eliminated through the application of a negative dc potential during formation. Cyclic current-voltage measurements were applied to probe membrane integrity, by using an electrolyte interacting with the silver electrode. Oxidation and reduction peaks were observed for non defect-free membranes. These peaks were caused by oxidation of the silver electrode tip and their occurrence was a very sensitive means of measuring membrane integrity. The membrane was a barrier for the ion transport from the electrolyte solution to the electrode surface, and thus defect-free membranes inhibited the appearance of the peaks. With the s-BLMs produced by the described method, binding of ions and proteins to the membrane could be measured repetitively and reproducibly through changes in the system capacitance and the shape of the cyclovoltammogram. The presence of divalent ions lead to a specific increase in total system capacitance of membranes from charged lipids. Protein binding was measured as a decrease of the capacitance, in accordance with the thickness increase of the total membrane after binding. The facility of production and the sensitivity of the aforementioned substances could make the s-BLMs, produced by the described method, a valuable system to be developed in the field of biosensing.

Electrochemistry↗

Simulation studies of protein-induced bilayer deformations, and lipid-induced protein tilting, on a mesoscopic model for lipid bilayers with embedded proteins.

Biological membranes are complex and highly cooperative structures. To relate biomembrane structure to their biological function it is often necessary to consider simpler systems. Lipid bilayers composed of one or two lipid species, and with embedded proteins, provide a model system for biological membranes. Here we present a mesoscopic model for lipid bilayers with embedded proteins, which we have studied with the help of the dissipative particle dynamics simulation technique. Because hydrophobic matching is believed to be one of the main physical mechanisms regulating lipid-protein interactions in membranes, we considered proteins of different hydrophobic length (as well as different sizes). We studied the cooperative behavior of the lipid-protein system at mesoscopic time- and lengthscales. In particular, we correlated in a systematic way the protein-induced bilayer perturbation, and the lipid-induced protein tilt, with the hydrophobic mismatch (positive and negative) between the protein hydrophobic length and the pure lipid bilayer hydrophobic thickness. The protein-induced bilayer perturbation was quantified in terms of a coherence length, xi(P), of the lipid bilayer hydrophobic thickness profile around the protein. The dependence on temperature of xi(P), and the protein tilt-angle, were studied above the main-transition temperature of the pure system, i.e., in the fluid phase. We found that xi(P) depends on mismatch, i.e., the higher the mismatch is, the longer xi(P) becomes, at least for positive values of mismatch; a dependence on the protein size appears as well. In the case of large model proteins experiencing extreme mismatch conditions, in the region next to the so-called lipid annulus, there appears an undershooting (or overshooting) region where the bilayer hydrophobic thickness is locally lower (or higher) than in the unperturbed bilayer, depending on whether the protein hydrophobic length is longer (or shorter) than the pure lipid bilayer hydrophobic thickness. Proteins may tilt when embedded in a too-thin bilayer. Our simulation data suggest that, when the embedded protein has a small size, the main mechanism to compensate for a large hydrophobic mismatch is the tilt, whereas large proteins react to negative mismatch by causing an increase of the hydrophobic thickness of the nearby bilayer. Furthermore, for the case of small, peptidelike proteins, we found the same type of functional dependence of the protein tilt-angle on mismatch, as was recently detected by fluorescence spectroscopy measurements.

Computer Simulation↗

Kinetically different populations of O-pyromellityl-gramicidin channels induced by poly-L-lysines in lipid bilayers.

Clustering of membrane proteins, in particular of ion channels, plays an important role in their functioning. To further elucidate the mechanism of such ion channel activity regulation, we performed experiments with a model system comprising the negatively-charged gramicidin analog, O-pyromellitylgramicidin (OPg) that forms ion channels in bilayer lipid membrane (BLM), and polycations. The effect of polylysines on the kinetics of OPg channels in BLM was studied by the method of sensitized photoinactivation. As found in our previous work, the interaction of polylysine with OPg led to the deceleration of the OPg photoinactivation kinetics, i.e., to the increase in the characteristic time of OPg photoinactivation. It was shown here that in a certain range of polylysine concentrations the photoinactivation kinetics displayed systematic deviations from a monoexponential curve and was well described by a sum of two exponentials. The deviations from the monoexponential approximation were more pronounced with polylysines having a lower degree of polymerization. These deviations increased also upon the elevation of the ionic strength of the bathing solution and the addition of calcium ions. A theoretical model is presented that relates the OPg photoinactivation kinetics at different concentration ratios of OPg and polylysine to the distribution of OPg molecules among OPg-polylysine clusters of different stoichiometry. This model is shown to explain qualitatively the experimental results, although the quantitative description of the whole body of evidence requires further development, assuming that the interaction of polylysine with OPg causes segregation of membrane domains enriched in OPg channels. The single-channel data, which revealed the insensitivity of the single-channel lifetime of OPg to the addition of polylysine, are in good agreement with the theoretical model.

Cations↗

Polarity-dependent voltage-gated porin channels from Escherichia coli in lipid bilayer membranes.

A porin preparation from Escherichia coli 0111:B4 consisting of Omp F and Omp C (with Omp F in excess) was purified by salt extraction procedures and investigated in bilayer lipid membranes formed according to the Montal-Mueller technique. The porin preparation was added to the KCl electrolyte compartment of the Montal-Mueller cell which was connected to the voltage source. As the porin incorporated into the membrane, asymmetric, voltage-gated ion channels were formed. Transmembrane voltages greater than +50 mV (measured with respect to the side of porin addition) caused channel closing, while negative voltages, on the other hand, had no effect on channel behaviour but did increase the rate of porin incorporation at higher voltages. With porin added to both compartments voltage gating no longer occurred. Single-channel conductances corresponded to effective pore diameters of 1.5 nm for opening events and 1.18 nm for channel closing events. The number of charges involved in gating was approximately 2.

Bacterial Outer Membrane Proteins↗

The mode of action of Vibrio cholerae cytolysin. The influences on both erythrocytes and planar lipid bilayers.

The interaction with erythrocytes of cholera cytolysin (CC) obtained from a non-01 Vibrio cholerae strain results in the osmotic rupture of target cells upon formation by CC of the waterfilled pores in their membranes. The aggregation of several toxin monomers is required for the formation of one CC channel with a radius of 0.9-1.0 nm. The investigations using planar bilayer lipid membranes suggest that the CC-induced pore is an interprotein anion selective channel carrying a fixed positive charge. The role of the charge was supported by the influence of pH on the selectivity, single conductance and voltage gating of the CC channels. The ability of the CC to modify both model and natural membranes has a maximum at pH 6.0-7.0. It was found that CC channels insert into the membrane asymmetrically. The effect of proteolytic treatment of the channel by papain also indicates that the two entrances of the channel protrude from the plane of the membrane into the solution for different distances. It is proposed that the biological effects of the non-01 V. cholera cytolysin are based on its channel-forming activity.

Animals↗

The transverse location of the fluorescent probe trans-parinaric acid in lipid bilayers.

The transverse location of trans-parinaric acid in spherical vesicles made up from dipalmitoylphosphatidylcholine has been investigated by the differential quenching of the probe fluorescence by 5- and 16-doxylstearic acid derivatives. The quenching data are interpreted in terms of a local fluorophore concentration factor. In this way it was found that the polyene of t-PnA is located within the inner part of the bilayer (presumably aligned with the bilayer lipids), both in the gel and in the liquid crystalline phases.

1,2-Dipalmitoylphosphatidylcholine↗

A new method of the measurement of the electrically neutral fluxes of cations through lipid bilayer membranes induced by Men+/nH+-exchangers.

Electrically neutral ionophores (nigericin, monencin) incorporated into a planar bilayer lipid membrane (BLM) bring about hydrogen ion gradient formation in the unstirred layers of BLM if a metal ion gradient on the membrane is prepared. Under these conditions a diffusion potential of a hydrogen ion is generated after addition of a protonophore. Cation selectivity of nigericin, monencin and A23187 has been studied by means of electrical potential measurements in the presence of a protonophore and Men+/nH+-exchangers mentioned above. The data on cation selectivity are in a good agreement with the well known results of the direct measurements of metal ion fluxes. This shows that the effect of generation of the potential on BLM in the presence of a protonophore and a Men+/nH+-exchanger can be used for the estimation of electrically neutral ion fluxes through BLM.

Anti-Bacterial Agents↗