Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Lighting”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources
PubMed1986

Aberrant immunoglobulin synthesis in light chain amyloidosis. Free light chain and light chain fragment production by human bone marrow cells in short-term tissue culture.

Bone marrow cells obtained from 14 patients with light chain amyloid (AL) deposition were examined by biosynthetic labeling techniques. These analyses identified free monoclonal light chain (L-chain) synthesis even in those patients whose serum or urine contained no M protein or free L-chains or only an intact M protein. The experiments also identified a subset of patients whose plasma cells synthesized polypeptides bearing constant region antigenic determinants that migrated more rapidly than intact L-chains on polyacrylamide gels. Since most AL fibrils contain L-chain fragments rather than intact L-chains, these studies suggested that the genesis of the fibril components may reflect aberrant synthesis, proteolytic processing, or both. We also noted that in some individuals the pattern of Ig synthesis normalized after several courses of cytotoxic therapy. Thus, we could use bone marrow Ig synthesis as a sensitive biochemical parameter for monitoring therapy. Finally, the presence of aberrant synthetic products in these clones raised questions about their origin with respect to the normal processes of transcription, translation, and posttranslational modification in Ig-producing cells.

Amyloidosis↗
PubMed1983

Inhibitory effect of MgATP on the release of regulatory light chain from scallop myosin and light chain composition of scallop myosin hybridized with abalone light chain 2 at 30 degrees C.

The experimental conditions for release of the regulatory light chain (RLC) of scallop myosin at 30 degrees C were studied. Substantially all RLC was released from myosin by incubation for 5 min in medium containing buffer and KCl. This release of RLC was inhibited strongly by Ca2+, while the effect of Mg2+ was about 10,000 times weaker than that of Ca2+. Even in the absence of Ca2+, MgATP and MgADP inhibited the release of RLC, while the protective effect of AMPPNP was negligible. Other Mg nucleotides also showed some protective effect, though appreciably less than MgATP. The incubation of scallop myosin with abalone regulatory light chain (LC2) at 30 degrees C for 5 min produced a hybrid myosin. In the presence of 5 mM MgCl2, 1 of the 2 mol of RLC per mol of scallop myosin was exchanged with 1 mol of LC2. In the presence of Ca2+ or MgATP, myosin bound 1 extra mole of LC2 besides the 2 mol each of SH-LC and RLC.

Adenosine Triphosphate↗
PubMed1993

Isolation of a shark immunoglobulin light chain cDNA clone encoding a protein resembling mammalian kappa light chains: implications for the evolution of light chains.

The time of emergence of immunoglobulin kappa and lambda light (L) chains in evolution is unknown. An L chain cDNA clone was isolated from the nurse shark (Ginglymostoma cirratum), a cartilaginous fish, whose predicted variable (V) region amino acid sequence has up to 60% sequence identity to mammalian V kappa domains. Genomic analyses suggest a cluster-type gene organization for this L chain locus, similar to the shark lambda-like immunoglobulin L chain loci rather than mammalian kappa loci. We propose that divergence of the ancestral L chain into isotypes likely occurred before the emergence of elasmobranchs 400-450 million years ago. Similarities in gene organization between the two isotypes in sharks may reflect the gene organization utilized by the ancestral L chain.

Amino Acid Sequence↗
PubMed2005

Effect of light dispersion of LED curing lights on resin composite polymerization.

PURPOSE: This study evaluated the effect of light dispersion of halogen and LED curing lights on resin composite polymerization. MATERIALS AND METHODS: One halogen (Optilux 501, SDS/Kerr, Orange, CA, USA) and five light-emitting diode (LED) curing lights (SmartLite iQ, Dentsply Caulk, Milford, DE, USA; LEDemetron 1, SDS/Kerr; FLASHlite 1001, Discus Dental, Culver City, CA, USA; UltraLume LED 5, Ultradent Products, South Jordan, UT, USA; Allegro, Den-Mat, Santa Maria, CA, USA) were used in this study. Specimens (8 mm diameter by 2 mm thick) were made in polytetrafluoroethylene molds using hybrid (Z100, 3M ESPE, St. Paul, MN, USA) and microfill (A110, 3M ESPE) composite resins. The top surface was polymerized for 5 seconds with the curing light guide tip positioned at a distance of 1 and 5 mm. Degree of conversion (DC) of the composite specimens was analyzed on the bottom surface using micro-Fourier Transform Infrared (FTIR) spectroscopy (Perkin-Elmer FTIR Spectrometer, Wellesley, PA, USA) 10 minutes after light activation. DC at the bottom of the 2 mm specimen was expressed as a percentage of the mean maximum DC. Five specimens were created per curing light and composite type (n=5). Percent mean DC ratios and SDs were calculated for each light under each testing condition. Data were analyzed by analysis of variance (ANOVA)/Tukey's test (alpha = .05). A beam analyzer (LBA-700, Spiricon, Logan, UT, USA) was used to record the emitted light from the curing lights at 0 and 5 mm distances (n=5). A Top Hat factor was used to compare the quality of the emitted beam profile (LBA/PC, Spiricon). The divergence angle from vertical was also determined in the x- and y-axes (LBA/PC). Mean values and SDs were calculated for each light under each testing condition (0 and 5 mm, x- and y-axes) and analyzed by a two-way ANOVA/Tukey's test (alpha = .05). RESULTS: For DC ratios, significant differences were found based on curing light and curing distance (p < .05). At 1 mm, Optilux 501 and FLASHlite 1001 produced significantly higher DC ratios with the hybrid resin composite. No differences were found among lights with the microfill at 1 mm. At 5 mm, SmartLite iQ, FLASHlite 1001, LEDemetron 1, and UltraLume LED 5 produced significantly higher DC ratios with the hybrid resin composite, whereas LEDemetron 1 and SmartLite iQ produced significantly higher DC ratios with the microfill resin composite. The UltraLume LED 5, Allegro, and Optilux 501 had significant reductions in mean DC ratios at curing distances of 1 and 5 mm with both resin composite types. For dispersion of light, significant differences were found in Top Hat factor and divergence angle (p < .001). SmartLite iQ had overall the highest Top Hat factor and lowest divergence angle of tested lights. A linear regression analysis relating pooled DC with pooled Top Hat factors and divergence angles found a very good correlation (r2 = .86) between dispersion of light over distance and the ability to polymerize resin composite. CLINICAL SIGNIFICANCE: The latest generation of LED curing lights provides DC ratios similar to or better than the halogen curing light at a curing distance of 5 mm. Dispersion of light plays a significant role in the DC of resin composite. To maximize curing effectiveness, light guides should be maintained in close proximity to the surface of the light-activated restorative material.

Analysis of Variance↗
PubMed1996

Close correspondence between the action spectra for the blue light responses of the guard cell and coleoptile chloroplasts, and the spectra for blue light-dependent stomatal opening and coleoptile phototropism.

Fluorescence spectroscopy was used to characterize blue light responses from chloroplasts of adaxial guard cells from Pima cotton (Gossypium barbadense) and coleoptile tips from corn (Zea mays). The chloroplast response to blue light was quantified by measurements of the blue light-induced enhancement of a red light-stimulated quenching of chlorophyll a fluorescence. In adaxial (upper) guard cells, low fluence rates of blue light applied under saturating fluence rates of red light enhanced the red light-stimulated fluorescence quenching by up to 50%. In contrast, added blue light did not alter the red light-stimulated quenching from abaxial (lower) guard cells. This response pattern paralleled the blue light sensitivity of stomatal opening in the two leaf surfaces. An action spectrum for the blue light-induced enhancement of the red light-stimulated quenching showed a major peak at 450 nm and two minor peaks at 420 and 470 nm. This spectrum matched closely an action spectrum for blue light-stimulated stomatal opening. Coleoptile chloroplasts also showed an enhancement by blue light of red light-stimulated quenching. The action spectrum of this response, showing a major peak at 450 nm, a minor peak at 470 nm, and a shoulder at 430 nm, closely matched an action spectrum for blue light-stimulated coleoptile phototropism. Both action spectra match the absorption spectrum of zeaxanthin, a chloroplastic carotenoid recently implicated in blue light photoreception of both guard cells and coleoptiles. The remarkable similarity between the action spectra for the blue light responses of guard cells and coleoptile chloroplasts and the spectra for blue light-stimulated stomatal opening and phototropism, coupled to the recently reported evidence on a role of zeaxanthin in blue light photoreception, indicates that the guard cell and coleoptile chloroplasts specialize in sensory transduction.

Journal Article↗
PubMed2006

Light-emitting diode curing light irradiance and polymerization of resin-based composite.

BACKGROUND: Light-emitting diode (LED) curing lights are becoming popular; however, questions about their efficiency remain. The authors performed a comprehensive analysis of the properties of resin-based composites cured with LED lights. METHODS: The authors evaluated seven LED lights and one quartz-tungsten-halogen light (control). They measured intensity, depth of cure (DOC), degree of conversion (DC), hardness and temperature rise. They used three shades of a hybrid resin-based composite and a microfill composite, as well as one shade of another hybrid composite. RESULTS: Two LED lights required additional cure time to reach a DOC similar to that of the control light. DC at the top of the samples was independent of the light used. At 2.0 millimeters, the DC for several LED lights was significantly lower than that for the control light and was correlated strongly to the light's intensity. The bottom-to-top ratio for hardness of resin-based composites cured by all but one light was greater than 0.80. All LED lights except one had smaller temperature rise than did the control light. CONCLUSIONS: Six of the seven LED curing lights performed similarly to a quartz-tungsten-halogen curing light in curing resin-based composites. Clinical Implications. While LED curing lights and a quartz-tungsten-halogen light could cure resin-based composites, some resin-based composites cured with LED lights may require additional curing time or smaller increments of thickness.

Composite Resins↗
PubMed1998

Light history and age-related changes in retinal light damage.

PURPOSE: To determine the effects of age and long-term light- or dark-rearing environments on acute, intense-light-mediated retinal degeneration. METHODS: Male albino rats were maintained in a dim cyclic light environment or in darkness for as long as 1 year. When aged 2, 4, 8, and 12 months, some rats were given the synthetic antioxidant dimethylthiourea (DMTU) by intraperitoneal injection and were exposed to intense visible light for as long as 24 hours. Uninjected control rats were exposed to light at the same time. Other rats were treated with light of lower intensity for various periods. Two weeks after intense-light treatment, photoreceptor cell degeneration was estimated by determining the level of rhodopsin and by measuring the content of photoreceptor cell DNA. Light-induced changes in retinal DNA were analyzed immediately after exposure by neutral gel electrophoresis and by 8-hydroxy-deoxyguanosine measurements. Expression of the antioxidative stress protein heme oxygenase-1 (HO-1) was determined by northern blot analysis of mRNA in retinal extracts. RESULTS: At all ages, rats reared in cyclic dim-light conditions had lower rhodopsin levels than did rats reared in darkness; photoreceptor cell DNA levels were unaffected by the rearing environment. Senescent losses in rhodopsin and retinal DNA were significant after rats were 12 months old. Dim-light-reared rats exhibited an age-related increase in retinal light damage susceptibility, whereas dark-reared rats were equally susceptible to damage at all ages. In both types of rats, the mechanism of light-induced cell death involved an apoptotic process, visualized by the pattern of DNA fragments on electrophoretic gels. The process also induced the expression of HO-1 mRNA. Photoreceptor cell loss determined by biochemical measurement, DNA fragmentation, and HO-1 induction were dramatically reduced by the administration of DMTU. CONCLUSIONS: The age-related increase in susceptibility to retinal light damage in rats is influenced by their long-term daily light history. Decreasing retinal irradiance by dark-rearing eliminates the age-related increase in light damage, suggesting a correlation between light environment and retinal gene expression associated with damage. In all rats, retinal light damage resulted in a pattern of DNA fragmentation consistent with apoptotic cell death and in an increased expression of HO-1 mRNA. Antioxidant treatment greatly reduced apoptosis and HO-1 expression. This indicates that light damage involves an oxidative process that may also trigger apoptosis in the retina. The rat aging model may provide useful insights into the role of light environment associated with retinal degeneration in an aging human population.

8-Hydroxy-2'-Deoxyguanosine↗
PubMed1998

Reception of far-ultraviolet light in Phycomyces: antagonistic interaction with blue and red light.

Phototropism experiments were done with sporangiophores of the fungus Phycomyces blakesleeanus to characterize the interaction between far-UV, blue and red light. Far-UV light elicits negative phototropism (bending away from the light source) while blue light elicits positive phototropism (bending toward the light source). In contrast, red light above 600 nm is phototropically inert. Phototropism was analyzed with light regimens of bilateral or unilateral irradiation with far-UV and blue light. Under bilateral irradiation, in which the two light sources were facing each other, blue light partially inhibited the far-UV-elicited phototropism. A fluence-response curve for this inhibition showed that blue light was maximally effective at fluence rates which exceeded 3 to 57 times that of the far-UV. Tonic red light, which was given from above, abolished to a large extent the antagonistic action of blue light. With a regimen of unilateral irradiation, i.e. when far-UV and blue light were given from the same side, a phototropic balance could be achieved with approximately equal fluence rates of blue and UV light. Above or below this critical balance point the bending was either negative or positive. In this setup the effect of tonic red light was complex. First, it caused an enhancement of the positive or negative bending, and second, it caused at some fluence rates a sign reversal from positive to negative phototropism. The balance point itself was only marginally affected. The data cannot be explained on the basis of a single photoreceptor and support the previous notion of separate far-UV and blue-light receptors. The antagonism between these two receptors probably occurs on the level of a red-light-absorbing receptor intermediate.

Dose-Response Relationship, Radiation↗
PubMed2001

Smokers' beliefs about "Light" and "Ultra Light" cigarettes.

OBJECTIVE: To assess beliefs about the tar and nicotine delivery characteristics and health benefits of Light and Ultra Light cigarettes among cigarette smokers. DESIGN: Random digit dialed telephone survey conducted in September 1999. SUBJECTS: Daily smokers (n = 2120) of Regular (46%), Light (39%), and Ultra Light (15%) cigarettes in the USA. The sample was weighted to match the US smoker population on age, sex, and ethnicity. MAIN OUTCOME MEASURES: Beliefs about Light and Ultra Light cigarettes were summarised on three dimensions: Safety (reduced health risk), Delivery (lowered tar and nicotine delivery), and Sensation (less harsh). RESULTS: Most smokers believed Lights and Ultra Lights were less harsh and delivered less tar and nicotine. On average, smokers believed that Lights afforded a 25% reduction in risk, and Ultra Lights a 33% reduction in risk. Light and Ultra Light cigarette smokers evaluated the risks of their own cigarette types more favourably. Light smokers had greater interest in quitting than Ultra Light smokers. Quitting intention was modestly related to beliefs about these cigarettes. Believing that Lights and Ultra Lights delivered less tar and nicotine and that they were less harsh each independently contributed to the belief that these cigarettes were safer. CONCLUSIONS: Many Light and Ultra Light smokers believe that smoking these cigarettes impart a substantial health benefit, due in part to their experience that these cigarettes are less harsh and the belief that these cigarettes deliver less tar.

Adult↗
PubMed1987

Effects of purified myosin light chain kinase on myosin light chain phosphorylation and catecholamine secretion in digitonin-permeabilized chromaffin cells.

Many non-muscle cells including chromaffin cells contain actin and myosin. The 20,000 dalton light chain subunits of myosin can be phosphorylated by a Ca2+/calmodulin-dependent enzyme, myosin light chain kinase. In tissues other than striated muscle, light chain phosphorylation is required for actin-induced myosin ATPase activity. The possibility that actin and myosin are involved in catecholamine secretion was investigated by determining whether increased phosphorylation in the presence of [gamma-32P]ATP of myosin light chain by myosin light chain kinase enhances secretion from digitonin-treated chromaffin cells. In the absence of exogenous myosin light chain kinase, 1 microM Ca2+ caused a 30-40% enhancement of the phosphorylation of a 20 kDa protein. This protein was identified on 2-dimensional gels as myosin light chain by its comigration with purified myosin light chain. Purified myosin light chain kinase (400 micrograms/ml) in the presence of calmodulin (10 microM) caused little or no enhancement of myosin light chain phosphorylation in the absence of Ca2+ in digitonin-treated cells. In the presence of 1 microM Ca2+, myosin light chain kinase (400 micrograms/ml) caused an approximately two-fold increase in myosin light chain phosphorylation in digitonin-treated cells in 5 min. The phosphorylation required permeabilization of the cells by digitonin and occurred within the cells rather than in the medium. Myosin light chain kinase-induced phosphorylation of myosin light chain was maximal at 1 microM Ca2+. Under identical conditions to those of the phosphorylation experiments, secretion was unaltered by myosin light chain kinase. The experiments indicate that the phosphorylation of myosin light chain by myosin light chain kinase is not a limiting factor in secretion in digitonin-treated chromaffin cells and suggest that the activation of myosin is not directly involved in secretion from the cells. The experiments also demonstrate the feasibility of investigation of effects of exogenously added proteins on secretion in digitonin-treated cells.

Adrenal Medulla↗
PubMed1988

Photostimulation of Japanese quail by dim light depends upon photophase contrast, not light intensity.

Three experiments were conducted to determine whether dim light is interpreted by Japanese quail as subjective day or night, and whether this interpretation depends upon absolute light intensity. Birds were exposed to 24-h days consisting of either bright light (2500-3000 lx) with dim light (0.5-5 lx) or dim light with darkness. Locomotor activity was higher in the brighter photophase, whether it was bright light or dim light, indicating that the birds interpreted the brighter phase as daytime. Dim light produced daytime activity levels when paired with darkness, but it produced nighttime activity when paired with bright light, indicating that activity rhythms are determined by relative not absolute light intensity. Similarly, photostimulation, as measured by growth of the cloacal protrusion area (CPA), depended upon photic context, not absolute light intensity. CPA growth occurred when birds were exposed to 16 h of dim light with 8 h of darkness (16dm:8dk) but not when exposed to 10 h of bright light with 14 h of dim light (10bt:14dm). Constant dim light was stimulatory regardless of previous dim light context. Photostimulation appears to depend upon subjective interpretations of day and night rather than solely upon light intensity.

Animals↗
PubMed1996

Light-emitting diodes as a light source for intraoperative photodynamic therapy.

The development of more cost-effective light sources for photodynamic therapy of brain tumors would be of benefit for both research and clinical applications. In this study, the use of light-emitting diode arrays for photodynamic therapy of brain tumors with Photofrin porfimer sodium was investigated. An inflatable balloon device with a light-emitting diode (LED) tip was constructed. These LEDs are based on the new semiconductor aluminum gallium arsenide. They can emit broad-spectrum red light at high power levels with a peak wavelength of 677 nm and a bandwidth of 25 nm. The balloon was inflated with 0.1% intralipid, which served as a light-scattering medium. Measurements of light flux at several points showed a high degree of light dispersion. The spectral emission of this probe was then compared with the absorption spectrum of Photofrin. This analysis showed that the light absorbed by Photofrin with the use of the LED source was 27.5% of that absorbed with the use of the monochromatic 630-nm light. Thus, to achieve an energy light dose equivalent to that of a laser light source, the LED light output must be increased by a factor of 3.63. This need for additional energy is the difference between a 630- and 677-nm absorption of Photofrin. Using the LED probe and the laser balloon adapter, a comparison of brain stem toxicity in canines was conducted. LED and laser light showed the same signs of toxicity at equivalent light energy and Photofrin doses. The maximal tolerated dose of Photofrin was 1.6 mg/kg, using 100 J/cm2 of light energy administered by laser or LED. This study concludes that LEDs are a suitable light source for photodynamic therapy of brain tumors with Photofrin. In addition, LEDs have the potential to be highly efficient light sources for second-generation photosensitizers with absorption wavelengths closer to the LED peak emission.

Animals↗
PubMed2000

Reversal of blue light-stimulated stomatal opening by green light.

Blue light-stimulated stomatal opening in detached epidermis of Vicia faba is reversed by green light. A 30 s green light pulse eliminated the transient opening stimulated by an immediately preceding blue light pulse. Opening was restored by a subsequent blue light pulse. An initial green light pulse did not alter the response to a subsequent blue light pulse. Reversal also occurred under continuous illumination, with or without a saturating red light background. The magnitude of the green light reversal depended on fluence rate, with full reversal observed at a green light fluence rate twice that of the blue light. Continuous green light given alone stimulated a slight stomatal opening, and had no effect on red light-stimulated opening. An action spectrum for the green light effect showed a maximum at 540 nm and minor peaks at 490 and 580 nm. This spectrum is similar to the action spectrum for blue light-stimulated stomatal opening, red-shifted by about 90 nm. The carotenoid zeaxanthin has been implicated as a photoreceptor for the stomatal blue light response. Blue/green reversibility might be explained by a pair of interconvertible zeaxanthin isomers, one absorbing in the blue and the other in the green, with the green absorbing form being the physiologically active one.

Fabaceae↗
PubMed1968

Effect of Low-intensity Red and Far-red Light and High-intensity White Light on the Flowering Response of the Long-day Plant Lemna gibba G3.

The long-day plant Lemna gibba L., strain G3 exhibits a relatively low sensitivity to short, white-light interruptions given during the dark period of a short-day cycle. However, the plants are fairly sensitive to low-intensity red light treatments given during a 15-hour dark period on the third day of a 2LD-(9L:15D)-2LD-7SD schedule. Far-red light is almost as effective as red light, and attempts to reverse the red light response with subsequent far-red light treatments have not been successful. Blue light proved to be without effect. When plants were grown on a 48-hour cycle with 15 minutes of red light every 4 hours during the dark period, the critical daylength was reduced from about 32 hours to slightly less than 12 hours.Continuous red light induced a fairly good flowering response. However, as little as 1 hour of white light each day gave a significant improvement in the flowering response over that of the continuous red light control. White light of 600 to 700 ft-c was more effective than white light of 60 to 70 ft-c. The white light was much more effective when divided into 2 equal exposures given 8 to 12 hours apart. These results suggest an increase in light sensitivity with regard to flower induction about 8 to 10 hours after the start of the light period.

Journal Article↗
PubMed2005

How filler properties, filler fraction, sample thickness and light source affect light attenuation in particulate filled resin composites.

OBJECTIVE: It was hypothesized that by standardizing variables such as light sources, filler types and filler surface treatment, it should be possible to use Beer-Lambert's law to predict light absorption in visible light-cured dental composites. METHODS: Mixture of 50 wt% bisGMA and 50 wt% TEGDMA to which a photo-initiator (0.35 wt% champhorquinone) and a co-initiator (0.7 wt% of dimethylaminoethylmethacrylate) was prepared. Three different filler types (HBB, SBB and KU) were added to that mixture in eight different volume percentage. Filler particles were either silane surface treated or not. Specimens were made with thicknesses of 1-5 mm. Total number of 1200 specimens were made for this study. Light transmission was obtained for halogen source and laser lights, which made the number of observations 2400. The absorbance values of the different materials were analyzed in Matlab with respect to the differences in filler fraction and sample thickness. RESULTS: The obtained results revealed that of the two light sources, more light was absorbed by the composite when the laser light was used. Among different filler types, the HBB filler absorbed most light and the KU filler the least. There were significant differences (p < 0.05) in light absorption between all three filler types. SIGNIFICANCE: By comparing the modeled surfaces generated by Matlab for different materials it was possible to determine how different variables such as filler type, filler surface treatment and light source affect light attenuation. The characteristic of incident light affected the light absorbance, meaning that not only the composite's composition needs to be considered in light absorption studies of dental composites.

Absorption↗
PubMed2002

Comparative bond strength of brackets cured using a pulsed xenon curing light with 2 different light-guide sizes.

Light curing of composite resin material beneath orthodontic brackets is common in clinical orthodontics. Experiences with composite resins and high-intensity lights indicate some advantages to staged curing of the composite. In this study, the shear/peel bond strength of orthodontic brackets bonded to bovine enamel and cured with a pulsed xenon plasma arc light was compared with that of bonds cured with a conventional tungsten-quartz-halogen light and a nonpulsed xenon plasma arc light. The pulsed light provided less light energy than the nonpulsed lights. A small and a larger light-guide tip were used with the pulsed xenon plasma arc light. Three different orthodontic composite resin adhesives were tested with each light. The pulsed xenon plasma arc light resulted in either the same or decreased shear/peel bond strength when compared with the nonpulsed lights. There appeared to be no advantage to the use of a pulsed xenon plasma arc light in bonding orthodontic brackets. Results from using either a small or a large light-guide tip varied with the adhesive tested.

Acid Etching, Dental↗