Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “BORATES”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources

Direct analysis of sugar alcohol borate complexes in plant extracts by matrix-assisted laser desorption/ionization fourier transform mass spectrometry.

Matrix-assisted laser desorption/ionization Fourier transform mass spectrometry (MALDI/FTMS), operating in the negative ion mode, is used to directly observe sugar alcohol borate complexes in a number of plant fractions. The method involves virtually no sample workup and, in the case of celery phloem sap, requires only 40 nL of sap to observe the borate complex. The isolation and characterization of such soluble borate complexes is important in understanding the distribution of boron in plants. The results show that the complexes are composed of two mannitol or sorbitol ligands (L) complexed to a single borate center (B). In some cases, the boron is complexed to non-alditol monosaccharides. Sustained off-resonance collision irradiation dissociation of the BL2- complex, where L is a mannitol, gives fragments that confirm the proposed structure. Complexes of larger oligosaccharides have also been successfully observed using MALDI/FTMS. Semiempirical molecular orbital calculations (AM1) of the mannitol BL2- complex show that the most favorable configuration is with carbons 3 and 4 of both mannitol residues complexed to the borate. This allows maximum interaction of the remaining hydroxyls with the borate center.

Borates↗

Determination of borates in caviare by ion-exclusion chromatography.

A specific and rapid analytical procedure for the determination of borates in caviare was developed using ion-exclusion chromatography. Products require minimal pre-treatment, are simply extracted with eluent and filtered prior to chromatography. Isolation of the analyte as a 2:1 sorbitol-borate complex was accomplished using an anion exchange column with an eluent consisting of 2 mM heptafluorobutyric acid + 50 mM sorbitol with conductivity detection [corrected]. Among five sugar alcohols examined for complexation, sorbitol was found to provide optimum resolution and a 3-4 times enhancement of response over borate anion alone. The response of the complex was linear over at least a 100 fold range in concentration (0.1-10 micrograms boron/ml) with a correlation coefficient of 0.9997. Using a boric acid standard solution, the limits of detection and quantitation were 0.065 microgram/ml and 0.216 microgram/ml, respectively, calculated as boron. Replicate analyses (n = 5) for samples having commercially added borate (equivalent to 300-1000 micrograms/g boron) gave RSD values of 1.18-2.03%. Recoveries of borate from fortified samples having commercially added borate present varied from 94.5 to 101.1% while untreated samples exhibited recoveries of 78.5-108.0% over a concentration range of 23-1039 micrograms/g, calculated as boron.

Animals↗

The real-time dust exposures of sodium borate workers: examination of exposure variability.

As part of an epidemiologic study of acute respiratory irritation, an assessment of the short term (TWA-0.25 hr) and daily (TWA-6 hr) dust and boron exposures of workers in a sodium borate production facility was undertaken. A real-time continuous aerosol monitor was used in an active mode with an in-line filter to collect a TWA-6 gravimetric sample with a datalogger to store the continuous aerosol measurements. Over 430 person-days of personal exposure measurements were made, resulting in more than 10,000 15-minute average (TWA-0.25) dust concentration measurements. The arithmetic mean total dust concentrations for the 13 job groups exposed to sodium borate dust ranged from 0.29 to 18.95 mg/m3. The geometric standard deviation of the TWA-6 total dust exposures within the sodium borate exposed job groups had a median of 2.78. The geometric standard deviation of the TWA-0.25 total dust exposures had a median of 3.97. In most jobs the "within-day" variability accounted for over 50% of the total variability in exposure levels. In jobs with constant exposure to sodium borate, the second most important source of exposure variability was attributable to "between worker" differences. Where there was only intermittent exposure, the second most important source of exposure variability was "within-worker" variability. The implications of these findings for control strategies are discussed. Based on boron measurements, a substantial portion of a total dust air sample is nonborate material such as cigarette smoke, vehicle exhaust, ambient dust, or hydration mass. Thus, even in an environment where sodium borate is being packaged, total dust measurements are an overestimate of the actual borate exposure level.

Air Pollutants, Occupational↗

Effect of extracellular calcium, pH and borate on growth oscillations in Lilium formosanum pollen tubes.

Calcium ions (Ca(2+)), protons (H(+)), and borate (B(OH)(4)(-)) are essential ions in the control of tip growth of pollen tubes. All three ions may interact with pectins, a major component of the expanding pollen tube cell wall. Ca(2+ )is thought to bind acidic residues, and cross-link adjacent pectin chains, thereby strengthening the cell wall. Protons are loosening agents; in pollen tube walls they may act through the enzyme pectin methylesterase (PME), and either reduce demethylation or stimulate hydrolysis of pectin. Finally, borate cross-links monomers of rhamnogalacturonan II (RG-II), and thus stiffens the cell wall. It is demonstrated here that changing the extracellular concentrations of Ca(2+), H(+) and borate affect not only the average growth rate of lily pollen tubes, but also influence the period of growth rate oscillations. The most dramatic effects are observed with increasing concentrations of Ca(2+) and borate, both of which markedly reduce the rate of growth of oscillating pollen tubes. Protons are less active, except at pH 7.0 where growth is inhibited. It is noteworthy, especially with borate, that the faster growing tubes exhibit the shorter periods of oscillation. The results are consistent with the idea that binding of Ca(2+) and borate to the cell wall may act at a similar level to alter the mechanical properties of the apical cell wall, with optimal concentrations being high enough to impart sufficient rigidity to the wall so as to prevent bursting in the face of cell turgor, but low enough to allow the wall to stretch quickly during periods of accelerating growth.

Borates↗

Effect of borate on the catalytic activities of muscle glyceraldehyde-3-phosphate dehydrogenase.

The effect of borate on glyceraldehyde-3-phosphate dehydrogenase from human, pig and rabbit muscle was studied. At lower concentration of borate only the dehydrogenase activity is inhibited, reversibly and competitively against NAD. At concentration of borate above 6 mM the plots of 1/v versus borate concentration become nonlinear and the inhibition is extended to the esterase and acetylphosphatase activities. In certain conditions a time-dependent inactivation and reactivation was observed. The direct interaction between borate (if present at concentration of at least 6 mM) and glyceraldehyde-3-phosphate dehydrogenase is postulated, the possible site of the reaction being the histidine residue(s). The esterase activity of the human muscle enzyme and the effect of borate on it are different from the other mammalian enzymes.

Animals↗

Borate protection of softwood from Coptotermes acinaciformis (Isoptera: Rhinotermitidae) damage: variation in protection thresholds explained.

Laboratory and field data reported in the literature are confusing with regard to "adequate" protection thresholds for borate timber preservatives. The confusion is compounded by differences in termite species, timber species and test methodology. Laboratory data indicate a borate retention of 0.5% mass/mass (m/m) boric acid equivalent (BAE) would cause > 90% termite mortality and restrict mass loss in test specimens to < or = 5%. Field data generally suggest that borate retentions appreciably > 0.5% m/m BAE are required. We report two field experiments with varying amounts of untreated feeder material in which Coptotermes acinaciformis (Froggatt) (Isoptera: Rhinotermitidae) responses to borate-treated radiata (Monterey) pine, Pinus radiata D. Don, were measured. The apparently conflicting results between laboratory and field data are explained by the presence or absence of untreated feeder material in the test environment. In the absence of untreated feeder material, wood containing 0.5% BAE provided adequate protection from Coptotermes sp., whereas in the presence of untreated feeder material, increased retentions were required. Furthermore, the retentions required increased with increased amounts of susceptible material present. Some termites, Nasutitermes sp. and Mastotermes darwiniensis Froggatt, for example, are borate-tolerant and borate timber preservatives are not a viable management option with these species. The lack of uniform standards for termite test methodology and assessment criteria for efficacy across the world is recognized as a difficulty with research into the performance of timber preservatives with termites. The many variables in laboratory and field assays make "prescriptive" standards difficult to recommend. The use of "performance" standards to define efficacy criteria ("adequate" protection) is discussed.

Animals↗

Separation of bivalent anti-T cell immunotoxin from Pichia pastoris glycoproteins by borate anion exchange.

A major problem encountered in the large-scale purification of the bivalent anti-T cell immunotoxin, A-dmDT390-bisFv(G4S), from Pichia pastoris supernatants was the presence of host glycoproteins exhibiting similar charge, size, and hydrophobicity characteristics. We overcame this problem by employing borate anion exchange chromatography. The borate anion has an affinity for carbohydrates and imparts negative charges to these structures. We found that at a concentration of sodium borate between 50 and 100 mM, the nonglycosylated immunotoxin did not bind to Poros 50 HQ anion exchanger resin, but glycoproteins, including aggregates related to the immunotoxin, did. By using this property of the immunotoxin in the presence of sodium borate, we successfully developed a 3-step purification procedure: (i) Butyl-650M hydrophobic interaction chromatography, (ii) Poros 50 HQ anion exchange chromatography in the presence of borate, and (iii) HiTrap Q anion exchange chromatography. The final preparation exhibited a purity of greater than 98% and a yield of greater than 50% from the supernatant. Previously, boronic acid resins have been used to separate glycoproteins from proteins. However, combining borate anion with conventional anion exchange resins accomplishes the separation of the immunotoxin from glycoproteins and eliminates the need to evaluate nonstandard resins with respect to good manufacturing practice guidelines.

Anion Exchange Resins↗

Formation of a trypsin-borate-4-aminobutanol ternary complex.

The formation of ternary complexes involving serine proteases, borate, and an alcohol has important implications for understanding the physiological actions of borate and for the development of tight binding inhibitors for this class of enzymes. Recent studies of a related enzyme, gamma-glutamyl transpeptidase, which is subject to inhibition by a labile serine/borate mixture, have demonstrated that construction of a non-labile boronate analogue results in an inhibitor with nearly 10(5)-fold greater potency. To evaluate the generalization of this biochemistry to serine proteases, we have observed the ternary complex formed from 4-aminobutanol, borate, and trypsin. A combination of (11)B and (1)H NMR and spectrophotometric assays using acetylarginine p-nitroanilide (Ac-Arg-pNA) as the chromogenic substrate all indicate a cooperative binding interaction in which the borate is esterified by the oxygen atoms of the 4-aminobutanol and trypsin residue Ser(195). Two downfield-shifted proton resonances at 15.5 and 16.6 ppm are proposed to arise from the labile imidazolium protons on His(57), indicating a salt bridge interaction with the negatively charged borate. A cooperativity parameter alpha of 0.2 is derived from the assays. These results provide the first direct evidence for formation of a ternary complex involving a serine protease, borate, and an alcohol, and suggest that this represents a general approach for the development of tight binding ligands.

Amino Alcohols↗

Composition and temperature dependence of cesium-borate glasses by molecular dynamics.

The structural aspects of xCs2O-(1-x)B2O3 glasses have been investigated by molecular dynamics as functions of Cs2O content (x=0.2, 0.3, and 0.4) and temperature (T=300 and 1250 K). The tetrahedral (BØ4-) and triangular (BØ3,BØ2O-, and BØO2 (2-)) short-range order borate units were found to be the structure-building entities of the simulated glasses [Ø=bridging oxygen (BO) and O-=nonbridging oxygen (NBO) atom]. The increase of Cs2O content results in the progressive increase of the NBO-containing triangle population at the expense of the BO4- tetrahedral units. The same effect is caused by temperature increase at a fixed Cs2O content, and this was associated with the "fragile" characteristics of alkali borate glasses. A comparison of simulated Cs and Li borates showed very similar structures at x=0.2, but dissimilar ones when the alkali content exceeds this composition. In particular, for x>0.2 Cs borates exhibit a preference for NBO formation relative to Li borates. Differences in the microstructure of sites hosting Cs ions were found, and this permits their classification into bridging (b type) and nonbridging type (nb type) of sites. b-type sites consist exclusively of BO atoms, while both BO and NBO atoms participate in nb-type sites. These differences in Cs-site local bonding characteristics were found to be reflected on the Cs-O(site) vibration frequencies. Also, the computed Cs-O vibrational responses for simulated Cs borates were found to compare well with experimental far-infrared spectra.

Journal Article↗

Bond analyses of borates from the Inorganic Crystal Structure Database.

Various fundamental building blocks (FBBs) are observed in the crystallographic structures of oxoborates available in the Inorganic Crystal Structure Database, Version 1.3.3 (2004); the occurrence of borate groups with low complexity is dominant. Bond-valence parameters d(0) of B-O bonds in 758 oxoborates with various FBBs have been calculated using the bond-valence sum model. Some discrepancies in the d(0) values obviously occur if the detailed configurations of FBBs in borate crystals are considered; d(0) is sensitive to the chemical bonding structure of B atoms in the crystallographic framework. Moreover, d(0) values are affected by the existence of interstitial atoms and the substitution of other anionic groups. In addition, the d(0) parameters for B-N, B-S, B-P and B-F bonds are also calculated statistically. Some suitable d(0) data for various borate FBBs are recommended according to their particular configurations, especially for those with low complexity. On the basis of the proposed linear relationship between calculated nonlinear optical (NLO) coefficients of borates and the current d(0) values for various FBBs, it is found that the d(0) values may be regarded as a useful parameter for pre-investigating the NLO properties of borates, leading to an efficient structural evaluation and design of novel borates.

Journal Article↗

Normal boron excretion levels and borates related gastroenteritis cases in Singapore.

Urinary borates calculated as boric acid were found to span 0 to 54 microgramme per ml urine for both Singaporean adults (population size: 507) and children (population size: 162). The normal dietary boron intake could account for the urinary boric acid levels observed. Of the hundred and fifty-three children who suffered from gastroenteritis in Singapore over the period from Jan to May 1989, two were found to have urinary boric acid exceeding 54 micrograms per ml urine. One of them was said to have consumed fish balls, bean curds and noodles prior to the onset of illness. These food items were among those likely to have added borates. Unfortunately, the dietary intake prior to the onset of illness of the other child was not recorded. Of the hundred and twelve adults affected by gastroenteritis in Dec 1988 in the Tiong Bahru area, one was found to have boric acid level of 117 micrograms per ml urine, indicative of added borates in the diet. The present study showed that borates related gastroenteritis incidents in Singapore over the time-period of our study at least, were few and far in between. With the on-going surveillance for the presence of added borates in both locally manufactured and imported food and the continued tight control over the importation and sale of borates, future incidents are likely to be minimal.

Adult↗

Detection and characterization of boric acid and borate ion binding to cytochrome c using multiple quantum filtered NMR.

The application of multiple quantum filtered (MQF) NMR to the identification and characterization of the binding of ligands containing quadrupolar nuclei to proteins is demonstrated. Using relaxation times measured by MQF NMR multiple binding of boric acid and borate ion to ferri and ferrocytochrome c was detected. Borate ion was found to have two different binding sites. One of them was in slow exchange, k(diss) = 20 +/- 3 s(-1) at 5 degrees C and D(2)O solution, in agreement with previous findings by (1)H NMR (G. Taler et al., 1998, Inorg. Chim. Acta 273, 388-392). The triple quantum relaxation of the borate in this site was found to be governed by dipolar interaction corresponding to an average B-H distance of 2.06 +/- 0.07 A. Other, fast exchanging sites for borate and boric acid could be detected only by MQF NMR. The binding equilibrium constants at these sites at pH 9.7 were found to be 1800 +/- 200 M(-1) and 2.6 +/- 1.5 M(-1) for the borate ion and boric acid, respectively. Thus, detection of binding by MQF NMR proved to be sensitive to fast exchanging ligands as well as to very weak binding that could not be detected using conventional methods.

Animals↗

Comparative toxicology of borates.

Inorganic borates, including boric acid, Na, ammonium, K, and Zn borates generally display low acute toxicity orally, dermally, and by inhalation. They are either not irritant or mild skin and eye irritants. Exceptions owing to physiochemical properties do occur. Longer-term toxicological studies have been reported mainly on boric acid or borax where the properties are generally similar on an equivalent boron (B) basis. The critical effects in several species are male reproductive toxicity and developmental toxicity. The doses that cause these effects are far higher than any levels to which the human population could be exposed. Humans would need to consume daily some 3.3 g of boric acid (or 5.0 g borax) to ingest the same dose level as the lowest animal NOAEL. No effects on fertility were seen in a population of workers exposed to borates or to a population exposed to high environmental borate levels. There is remarkable similarity in the toxicological effects of boric acid and borax across different species. Other inorganic borates that simply dissociate to boric acid are expected to display similar toxicity, whereas those that do not dissociate simply to boric acid may display a different toxicological profile.

Animals↗

Selective chromatographic fractionation of catechol estrogens on anion exchangers in borate form.

The borate form of anion exchangers has been investigated for its utility in the field of estrogen analysis. The borate form of a weak (DEAE-Sephadex A-25) and a strong (QAE-Sephadex A-25) anion exchanger was easily prepared by appropriate washing of the gels, without the need of time consuming immobilization techniques. Estrogens with vicinal cis-hydroxyls were strongly retained in both gels through formation of borate complexes and readily separated from estrogens not possessing such groups. Moreover, borate complex formation with the labile o-dihydroxyphenyl moiety of catechol estrogens fully protected them from decomposition during chromatography. Quantitative recovery of catechol estrogens was thereby obtained without use of antioxidants. The borate form of QAE-Sephadex A-25 was capable, in addition, of separating estrogens not possessing vicinal cis-hydroxyls from the corresponding neutral steroids.

Anion Exchange Resins↗

Optical absorption and photoluminescence properties of Er3+ doped mixed alkali borate glasses.

An investigations of the optical absorption and fluorescence spectra of 0.2 mol% Er2O3 in mixed alkali borate glasses of the type 67.8B2O3 x xLi2O(32-x)Na2O, 67.8B2O3 x xLi2O(32-x)K2O and 67.8B2O3 x xNa2O(32-x)K2O (where x = 8, 12, 16, 20 and 24) are presented. The glasses were obtained by quenching melts consisting of H3BO3, Li2CO3, Na2CO3, K2CO3 and Er2O3 (950-1100 degrees C, 1.5-2 h) between two brass plates. Spectroscopic parameters like Racah (E1, E2 and E3), spin-orbit (xi(4f)) and configuration interaction (alpha) parameters are deduced as function of x. Using Judd-Ofelt theory, Judd-Ofelt intensity parameters (omega2, omega4 and omega6) are obtained. Radiative and non-radiative transition rates (A(T) and W(MPR)), radiative lifetimes (tauR), branching ratios (beta) and integrated absorption cross-sections (sigma) have been computed for certain excited states of Er3+ in these mixed alkali borate glasses. Emission spectra have been studied for all the three Er3+ doped mixed alkali borate glasses. The present paper throws light on the trends observed in the intensity parameters, radiative lifetimes, branching ratios and emission cross-sections as a function of x in these borate glasses, keeping in view the effect of mixed alkalies in borate glasses.

Absorption↗

Hydroxypropyl guar-borate interactions with tear film mucin and lysozyme.

The interactions of hydroxypropyl guar (HPG) with boric acid, lysozyme, and mucin were characterized by rheology, light scattering, electrophoresis, and isothermal titration calorimetry to help understand how HPG interacts with tear film components. Borate binds to guar under pH, temperature, and ionic strength conditions representative of those found in the eye. The HPG-borate complexes behave as anionic polyelectrolytes and thus interact with cationic lysozyme, a major tear film protein, whereas HPG-borate does not appear to bind to mucin, an anionic glycoprotein. The interactions of HPG, borate, lysozyme, and mucin can be explained by two physical interactions: (1) pH-dependent binding of borate to carbohydrates and (2) the electrostatic attraction of oppositely charged macromolecules.

Animals↗

Serine-borate complex as a transition-state inhibitor of gamma-glutamyl transpeptidase.

gamma-Glutamyl transpeptidase, a membrane-bound enzyme, functions in the gamma-glutamyl cycle to catalyze utilization of glutathione. It has been postulated that the amino-acid-stimulated utilization of glutathione by gamma-glutamyl transpeptidase reflects an aspect of amino acid translocation. As one approach to the effective in vivo inhibition of this enzyme, the inhibition of the enzyme by L-serine in the presence of borate buffers [Revel, J.P. & Ball, E.G. (1959) J. Biol. Chem. 234, 577-582] was reinvestigated. Inhibition by L-serine, D-serine, and alpha-methyl-DL-serine in the presence of borate is competitive with respect to gamma-glutamyl substrate and such inhibition is parallel to the activity of transpeptidase toward L-gamma-glutamyl, D-gamma-glutamyl, and L-gamma-(alpha-methyl)glutamyl derivatives. L-Serine and borate effectively protect against inactivation of the enzyme by the gamma-glutamyl analogs, 6-diazo-5-oxonorleucine and azaserine, which bind to the gamma-glutamyl site of the enzyme. These studies, kinetic investigations, equilibrium dialysis experiments, and other data support the view that inhibition is produced by formation of serine-borate complex which binds at the gamma-glutamyl binding site of the light subunit of gamma-glutamyl transpeptidase. The data indicate that serine-borate complex is a transition state inhibitor of gamma-glutamyl transpeptidase.

Azaserine↗

Reproductive effects of inorganic borates on male employees: birth rate assessment.

The purpose of this study was to investigate the potential for reproductive effects of inorganic borate compounds on male employees. The standardized birth ratio (SBR) methodology was used to assess fertility among male employees, using live births as the measured end point. The ratio of female to male births was also assessed. Data were collected via questionnaires and telephone follow-up interviews. Medical insurance records were assessed for nonresponders. Exposures were assessed using three semiquantitative categories. We found a statistically significant increase in fertility as measured by live births among the employees of the inorganic borate facility. There does not appear to be any decrease in fertility due to exposures either as analyzed by the borate exposure categories or over time, which is an indirect measure of exposures. We found a nonstatistically significant increase in the percentage of female offspring. This increase was due, not to a deficiency of male offspring, but rather to a marked increase in the numbers of female offspring. This increase in percentage female offspring does not appear to be related to exposures to inorganic borates. Based on the data, exposures to inorganic borates do not appear to adversely affect fertility in this population.

Birth Rate↗