Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “ARTHRODESIS”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources

Severe Lisfrancs injuries: primary arthrodesis or ORIF?

Twenty-eight patients, with severe, acute Lisfranc dislocations, requiring operative intervention, were treated between 1989 and 1992 in a level one Trauma Center. Different treatment protocols were used by the two senior staff surgeons. This allowed ORIF to be compared to complete arthrodesis and partial arthrodesis. Twelve patients were treated with primary arthrodesis after open reduction of the dislocation. Partial (5) or complete arthrodesis (6) (depending on the type of fracture) was performed in these 12 patients. Sixteen patients were treated with open reduction and temporary fixation with stabilization and compression screw fixation (ORIF group). The subgroups were identical in age (mean 30.5 years), follow-up (30.1 months), type of fracture, type of injury and time to intervention. Anatomical reduction was achieved in eight of the 12 patients in the arthrodesis groups and in 12 of the 16 patients in the ORIF group. The Baltimore Painful foot Score (PFS) was higher in the ORIF group then in the complete arthrodesis group meaning the ORIF group had less pain. No difference in the PFS was found between the ORIF group and the partial arthrodesis group. Subsequent revision surgery was necessary in two cases in the arthrodesis groups and two cases in the ORIF group. Stiffness of the forefoot, loss of metatarsal arch, and sympathetic dystrophy occurred more frequently in the complete arthrodesis group. Open reduction and internal fixation with screws or partial arthrodesis is the treatment of choice in severe tarsometatarsal fracture dislocations. Primary complete arthrodesis should be reserved as a salvage procedure.

Acute Disease↗

Thumb arthrodesis.

PURPOSE OF REVIEW: Arthrodesis of the thumb carpometacarpal, metacarpophalangeal, and interphalangeal joints are well-established options in the management of arthritis, instability, and/or deformity. This review includes a general review of the indications and technique of arthrodesis and recent review of the literature. RECENT FINDINGS: New literature has focused on the role of arthrodesis in managing carpometacarpal arthritis and compared its results with ligament reconstruction and tendon interposition. However, no conclusive evidence demonstrates the superiority of arthrodesis. Several new articles have demonstrated good long-term results of carpometacarpal arthrodesis. A new report on complications associated with plate and screw fixation for carpometacarpal arthritis has been published, leading the authors to conclude that k-wire fixation was a better option. A technique of metacarpophalangeal joint arthrodesis using a cannulated screw has been recently published with good success. Moreover, a cup-in-cone technique of reaming surfaces of the thumb metacarpophalangeal joint to maximize bone contact surface area has been described. Other authors have reiterated and reinforced the success of some of the more standard techniques including Herbert screws for interphalangeal joint arthrodeses. SUMMARY: Thumb arthrodesis of the carpometacarpal, metacarpophalangeal, and interphalangeal joints maintains a significant role in the management of deformity and arthritis. Better comparison studies are necessary in evaluating arthrodesis of the carpometacarpal joint versus arthroplasty. New fixation techniques for metacarpophalangeal joint arthrodesis are promising. Standard fixation for interphalangeal joint fusion has been reiterated. Successful arthrodesis can lead to excellent patient outcomes and function.

Arthritis↗

Degenerative disc disease treated with combined anterior and posterior arthrodesis and posterior instrumentation.

STUDY DESIGN: This study retrospectively reviewed the outcome of 58 patients all diagnosed with severe low back pain secondary to degenerative disc disease and treated with anterior arthrodesis and posterior instrumented arthrodesis. OBJECTIVES: To evaluate the outcome of a select group of patients with degenerative disc disease treated with this surgical intervention at a minimum of 2 years of follow-up. SUMMARY OF BACKGROUND DATA: Patients with degenerative disc disease who fail nonoperative treatment generally have disappointing outcomes with traditional surgical intervention. The literature analyzing posterior instrumented arthrodesis tends to exhibit the best results, but the numbers of patients with degenerative disc disease in these articles are few, and their outcomes are worse than the other low back conditions. Even patients with solid posterior arthrodesis have been noted to have continued low back pain. No articles have evaluated this specific surgical procedure in a group of patients all with the diagnosis of degenerative disc disease and no previous surgery. METHODS: All patients were diagnosed with degenerative disc disease and had failed prolonged nonoperative treatment (average 4.9 years). Fusion levels were delineated by MRI and provocative discography in correlation with history and physical examination. The senior author (M.R.P.) performed the identical operative procedure on all patients, under a single anesthetic. The arthrodesis solidity was evaluated with radiographic studies and operative posterior exploration when necessary. Final outcomes were determined using a functional and satisfaction questionnaire, return to work, narcotic use, and the rate of solid arthrodesis. Charts, radiographs, and questionnaires were reviewed by an independent evaluator at final follow-up (average 35 months). RESULTS: The solid arthrodesis rate was 95%. The three pseudoarthroses were all in patients with a three-level arthrodesis. Eighty-eight percent of the patients were able to return to work. Nineteen percent of patients required long-term narcotics, whereas 48% of the patient population were on narcotics before surgery. Eighty-six percent of the patients had a "better" rating at final follow-up. This included patients with decreased pain by visual analog scale, improved functional questionnaire, and those who would recommend the procedure to a friend or family member. Ten percent of the patients were "the same," and 3% were "worse." Lumbar lordosis was maintained or improved. Complications did not exceed literature controls. CONCLUSIONS: Selected patients with discography-proven severe low back pain secondary to degenerative disc disease, who failed extensive nonoperative treatment, were treated successfully with anterior-posterior instrumented arthrodesis. The good arthrodesis rate, return to work rate, and patient satisfaction may justify the consideration of this aggressive treatment option in this specific patient population.

Adult↗

Initial stability of ankle arthrodesis with three-screw fixation. A finite element analysis.

OBJECTIVE: Compare the initial stability at the fusion site of ankle arthrodesis fixed with two and three screws. DESIGN: Finite element models of ankle arthrodesis were developed from computed tomography images. Two-screw constructs were augmented with a third screw in different orientations and subjected to loads likely to affect the ankle postoperatively. BACKGROUND: More stable fixation seems to increase the chance of fusion, as it minimises the motion between the tibiotalar interfaces. METHODS: Non-linear elastic finite element analyses were performed in external torsion and dorsiflexion. The micromotions at the tibiotalar interface were computed to compare the two- and three-screw fixation in intact and flat-cut arthrodesis. RESULTS: Adding a third screw reduced the micromotions at the fusion site. Inserting the third screw anteriorly predicted lower peak micromotions than inserting the screw posteriorly, except for the intact arthrodesis tested in dorsiflexion. Three-screw intact arthrodesis predicted lower peak micromotions than flat-cut arthrodesis. CONCLUSIONS: Better stability was predicted for three-screw ankle arthrodesis. In flat-cut arthrodesis, a third screw inserted anteriorly performed better than a posterior screw. In intact arthrodesis, a posterior screw seemed a better option when flexion stability was the main concern. Even with three-screw fixation, the configuration of the first two-crossed screws may still be important to improve the stability at the fusion site.

Ankle Joint↗

Shoulder arthrodesis: indications, technique, results, and complications.

Complications after shoulder arthrodesis are frequent. Through results and comparisons with the literature, the presented article analyzes the correlation of complications with the specific operative techniques, indications, and postoperative treatment. Between 1964 and 2001, a total of 43 cases of shoulder arthrodesis (13 screw and 30 plate arthrodeses) were performed and then analyzed after a mean of 6.7 years (range, 0.5-36 years). Surgery was carried out on 10 female patients (23%) and 33 male patients (77%) with a mean age of 35 years (range, 11-82 years). These patients had the following indications: paralysis (32 [74%]), osteoarthritis or humeral head necrosis (15 [35%]), infection (7 [16%]), and persistent shoulder instability (6 [14%]). The extent of active movement after arthrodesis was 56 degrees abduction (range, 20 degrees - 90 degrees) and 60 degrees forward flexion (range, 20 degrees - 105 degrees), with an increase in the Constant score in all cases, from a mean of 27 points preoperatively to 57 points postoperatively (difference, 30 points). The patients rated the outcome of surgery as excellent, good, or satisfactory in 91% of cases. Complications after shoulder arthrodesis were noted in 12 of 43 patients (28%). The most frequent complications after screw/plate arthrodesis included pseudarthrosis, 2 (15%)/3 (10%); infection, 1 (8%)/4 (13%); and fracture of the humerus, 0/4 (13%). No specific judgment can be attributed to the different osteosynthesis techniques used in shoulder arthrodesis, either in the cases presented at our clinic or in the literature. Pseudarthrosis appeared to be less frequent in cases of plate arthrodesis compared with screw arthrodesis. However, the application of plates resulted more often in infection, postoperative fractures of the humerus, and the necessity for removal of material. Particularly in patients with paralysis, a shoulder arthrodesis resulted in an improvement in postoperative active function and presented a suitable operative option.

Adolescent↗

[Optoelectronic gait analysis after metatarsophalangeal arthrodesis of the hallux: fifteen cases].

PURPOSE OF THE STUDY: Degeneration of the metatarsophalangeal joint of the hallux is a frequent secondary lesion of the first ray subsequent to hallux valgus. Different surgical techniques have been proposed for cure, including metatarsophalangeal arthrodesis. Joint fusion relieves pain but sacrifices joint motion. The purpose of this work was to assess changes observed in gait after metatarsophalangeal arthrodesis of the hallux using a three-dimensional optoelectronic system. MATERIAL AND METHODS: Gait analysis was performed with a Vicon 3D system with five cameras and two AMTI force platforms in twelve patients who had undergone metatarsophalangeal arthrodesis more than six months earlier. The kinetic and kinematic curves and ground reaction forces were analyzed. Changes in the gait cycle and any compensations observed in the talocrural and interphalangeal joints were noted in the three dimensions. Wilcoxon test for paired series was applied for the statistical analysis. RESULTS: The general gait parameters and kinetic and kinematic values were not modified (excepting a non-significant decline in maximal dorsiflexion of the ankle joint). There was a significant decrease in propulsion force in the anteroposterior and vertical planes, with significantly later heal lift-off and systematic displacement of ground reaction forces anterior to the metatarsophalangeal joint on the arthrodesis side. Reflectors positioned on the distal extremity of the hallux demonstrated that the essential part of compensation occurred at the level of the interphalangeal joint. DISCUSSION: Gait analysis after tibiotalar arthrodesis has been widely reported in the literature. The consequence of joint fusion on the rear foot and/or the torsion couple have also been studied. However, to our knowledge, there has been only one report using a different methodology devoted to metatarsophalaneal arthrodesis of the hallux. In this study, only step length and interphalangeal moment as well as ankle force were found to be decreased. Function of the interphalangeal joint was not assessed. The Vicon system enabled an adapted study of gait after metatarsophalangeal arthrodesis. This method offers several perspectives: study of the effect of the position of the arthrodesis in the sagittal plane on gait, changes over time in interphalangeal joint motion, or consequences of fusion on walking up and down stairs. CONCLUSION: Metatarsophalangeal arthrodesis of the hallux does not modify general gait parameters nor the kinetic and kinematic values. Compensation is achieved via the interphalangeal joint.

Aged↗

[Medial flexor digitorum longus tendon augmentation and lateral foot column lengthening or reorienting triple arthrodesis as surgical therapy of posterior tibial tendon dysfunction].

QUESTION: The purpose of this study was to evaluate the alignment and functional outcome after surgical augmentation of the tibialis posterior by tendon transfer and lateral column lengthening by osteotomy of the os calcis, calcaneo-cuboidal arthrodesis or reorientating triple arthrodesis. METHODS: From 1991 to 1999 41 patients with the clinical and radiological diagnosis of dysfunction of the tibialis posterior tendon underwent surgical exploration and repair. These 41 patients (22 women, 19 men) had an average age of 44.3 years (range, 19-69 years) and had been symptomatic for an average of 2.3 years (range, 6 months to 6 years). All patients had the symptoms of a painful flatfoot deformity without dynamic support along the medioplantar aspect. Flexor digitorum longus (FDL) tendon transfer as reconstruction of the tibialis posterior tendon was performed in the cases without major deformity (n = 77). Patients underwent FDL transfer and lengthening osteotomy (n = 15) of the os calcis or calcaneocuboidal (c-c) arthrodesis (n = 12) if passive correction of the foot deformity was still possible and reorientating triple arthrodesis (n = 7) when a fixed flatfoot deformity had developed. AOFAS score and radiological examination were used preoperatively and in the follow-up. RESULTS: The AOFAS score improved for stage 1 patients after a mean follow-up of 43 months with FDL transfer from a preoperative mean of 54 to 84 points, for stage II patients with FDL transfer and lengthening osteotomy (mean follow-up 36 m) from 47 to 92 points, with c-c arthrodesis (follow-up 66 m) from 48 to 86 points, and for stage III patients with triple arthrodesis from 42 to 72 points. In two patients, the deformity failed to improve (stage I) necessitating a revision surgery with a calceneo-cuboidal lengthening arthrodesis for relapsing deformity. CONCLUSION: In order to correct deformity and provide substantial relief of foot pain and dysfunction, we recommend the transfer of the FDL tendon in flexible flat foot deformity together with lengthening osteotomy. This treatment will provide optimal restoration of a dynamic support along the medioplantar aspect of the foot and is functionally superior to a c-c arthrodesis. Reorientating triple arthrodesis showed fair functional results and is recommended--for fixed flatfoot deformity.

Adult↗

Open versus arthroscopic ankle arthrodesis: a comparative study.

A retrospective review was undertaken for 36 patients who underwent ankle arthrodesis. Nineteen patients underwent an arthroscopic ankle arthrodesis, and 17 patients underwent an open arthrodesis. Only patients with limited angular deformities were suitable candidates for an arthroscopic arthrodesis. The open arthrodesis group inclusion criteria were defined by the maximum coronal and sagittal plane deformity in the arthroscopic group. Perioperative parameters were compared and analyzed. Arthroscopic ankle arthrodesis yielded comparable fusion rates to open ankle arthrodesis, with significantly less morbidity, shorter operative times, shorter tourniquet times, less blood loss, and shorter hospital stays. Arthroscopic ankle arthrodesis is a valid alternative to traditional open arthrodesis of the ankle for selected patients with ankle arthritis.

Adolescent↗

Motion of the hindfoot after simulated arthrodesis.

Arthrodesis of the subtalar joint, triple arthrodesis (involving the subtalar, talonavicular, and calcaneocuboid joints), double arthrodesis (involving the talonavicular and calcaneocuboid joints), arthrodesis of the talonavicular joint, and arthrodesis of the calcaneocuboid joint were simulated in a cadaver model, and the range of motion of each joint not involved in the simulated arthrodesis was measured with a three-dimensional magnetic space tracking system. The excursion of the posterior tibial tendon was also measured under all of these conditions. We found that any combination of simulated arthrodeses that included the talonavicular joint severely limited the motion of the remaining joints to about 2 degrees and limited the excursion of the posterior tibial tendon to 25 per cent of the preoperative value. Simulated arthrodesis of the calcaneocuboid joint had little effect on the range of motion of the subtalar joint, and it reduced the range of motion of the talonavicular joint to a mean of 67 per cent of the preoperative value; a mean of 73 per cent of the excursion of the posterior tibial tendon was retained. After simulated arthrodesis of the subtalar joint, a mean of 26 per cent of the motion of the talonavicular joint, 56 per cent of the motion of the calcaneocuboid joint, and 46 per cent of the excursion of the posterior tibial tendon was retained. The talonavicular joint is the key joint of the triple joint complex. The talonavicular joint had the greatest range of motion, and simulated arthrodesis of this joint essentially eliminated motion of the other joints of the complex.

Arthrodesis↗

Failure of external spinal skeletal fixation to improve predictability of lumbar arthrodesis.

BACKGROUND: Whether lumbar arthrodesis can relieve isolated low-back pain in the absence of focal neurological findings or instability is unclear. The results of published studies are also inconsistent with regard to whether temporary back-pain relief with external spinal skeletal fixation can predict lasting back-pain relief after arthrodesis. This report presents the results, with regard to clinical benefit and complications, of more than 100 external spinal skeletal fixation procedures undertaken as a prelude to lumbar arthrodesis. METHODS: The records of all patients who underwent external spinal skeletal fixation between 1989 and 1999 were reviewed with attention to perioperative complications, pain relief from the test procedure, the clinical benefit from a subsequent arthrodesis, and the functional status after the arthrodesis. Analyzed data included the frequency of neurological complications and infections and the benefit (Prolo score) after staged spinal arthrodesis in patients who underwent arthrodesis after temporarily experiencing pain relief with the test procedure. RESULTS: A total of 103 external spinal skeletal fixation procedures were undertaken. Neurological complications occurred in two procedures (2%); one resulted in permanent sciatica. Infections occurred in five patients (5%). Sixty patients experienced pain relief during the external fixation test, but only twenty-seven of forty-nine patients who went on to have an arthrodesis and had sufficient follow-up reported that they were doing well at a minimum of one year later. In no case did the external spinal skeletal fixation procedure cause a permanent increase in low-back pain. CONCLUSIONS: On the basis of this analysis, external spinal skeletal fixation should not be used as a predictor of pain relief after lumbar arthrodesis.

Adult↗

Proximal interphalangeal joint arthrodesis using a combination plate-screw technique in 53 horses (1994-2003).

REASONS FOR PERFORMING STUDY: A method for proximal interphalangeal joint (PIP joint) arthrodesis that provides a stable fixation and minimal duration of cast support is evaluated retrospectively. OBJECTIVES: Evaluate the clinical use of a combined plate-screw method for PIP joint arthrodesis in a large number of horses. METHODS: The records of 53 horses undergoing PIP joint arthrodesis were reviewed. Arthrodesis was performed with a dorsally placed 3-, 4- or 5-hole narrow dynamic compression plate (DCP) with 2 transarticular cortex screws placed in lag fashion either side of the plate. Subject details, clinical presentation, radiographic findings, surgical technique, post operative treatment and complications were recorded. Long-term follow up (mean 3 years) was obtained for 46 horses. RESULTS: Arthrodesis procedures (n = 58) were performed on 53 horses with a DCP in combination with transarticular cortex screws placed in lag fashion. Conditions treated were osteoarthritis (OA) of the PIP joint, fracture of middle phalanx, PIP joint subluxation, subchondral cystic lesions and degenerative joint disease secondary to sepsis. Time of post operative cast application was 14 days. Overall 40/46 (87%) horses could be used as intended including 20/25 (81%) forelimb and 20/21 (95%) hindlimb arthrodeses. Twenty-three of 27 (85%) horses used for performance had successful outcomes. Complications included implant infection, cast sores and partial implant failure. CONCLUSIONS: PIP joint arthrodesis using a DCP and transarticular cortex screws placed in lag fashion provides a stable construct and short casting period with minimal complications. The prognosis for return to performance was excellent for horses treated with hindlimb PIP joint arthrodesis and good for forelimb arthrodesis. POTENTIAL RELEVANCE: Use of a combination technique for PIP joint arthrodesis allows a high proportion of horses with pastern joint disease to be returned to their athletic potential.

Animals↗

[Arthrodesis of interphalangeal joints by means of external frame fixation].

PURPOSE OF THE STUDY: The indications for arthrodesis of interphalangeal joints include pain, instability, deformity or irreparable damage to the relevant flexor or extensor tendon. The general principle of arthrodesis is to resect the affected joint ends in the flexion desired so that a highest possible surface of contact may be provided. Subsequently, retention by means of internal or external fixation is performed. The aim of this study is to evaluate our method of interphalangeal joint arthrodesis, using an external frame fixator, to present the results and to point out the advantages of this method, thus showing its applicability for relevant surgical indication. MATERIAL: Arthrodesis by external fixation was carried out in 37 patients. The group included 21 men and 16 women at an average age of 49.6 years (range, 30 to 67 years). The method was used in the patients who differed in the etiology of lesions of interphalangeal joints. Twenty-two patients had previously experienced purulent arthritis, six had post-traumatic arthritis and joint instability, five had rheumatoid arthritis, two had primary arthritis and two had an inveterate rupture of the extensor aponeurosis. METHODS: We used a simple frame fixator whose stability was based on two to four Kirschner's wires inserted and maintained in clamps on rods, 4 cm or 7.5 cm long, each having a double anti-clockwise thread that facilitates compression, distraction and correction in one plane. The surgical procedure was carried out under axillary block with the use of a tourniquet. It involved making an S-shaped incision dorsally, severing the extensor apparatus, resecting articular surfaces in the desired flexion position, inserting parallel wires and fixing them in clamps on rods, achieving compression, checking the position of articular surfaces and suturing. Included in the group assessment were the gender and age of the patients, etiology of articular disease, number of the digits and joints affected, limb laterality, wound healing, stability of fixation, maintenance of a correct arthrodesis position and signs of healing on X-ray images. Time required for bony union and the shortening of the digit due to surgery were also included in the evaluation. RESULTS: The 35 followed-up patients showed healing of the wound and arthrodesis, with firm bony union being achieved at an average of 6.7 weeks. In one patient after removal of the fixator, septic pseudoarthrosis developed at the site of the resected distal interphalangeal joint. Another patient developed ischemia of the distal phalanx of the thumb treated, which required release and subsequent removal of the external fixator, with vasodilatation therapy. After a prolonged topical therapy, painless fibrous ankylosis developed in that interphalangeal joint and the thumb was salvaged. DISCUSSION: The aim of arthrodesis is to achieve firm and painless bony union in a correct functional position at a reasonable time. Arthrodesis in our patients healed at an average time of 6.7 weeks. The high effectivity of the compression technique in achieving firm bony fusion is the factor emphasized in the literature, particularly in situations where there is a reduced contact surface, poor coverage by soft tissue, infection or the presence of a systemic disease, such as rheumatoid arthritis or diabetes mellitus. This all is in agreement with the results of this study. CONCLUSIONS: This study shows advantages of the compression technique of arthrodesis by means of external frame fixation based on insertion of wires beyond the site of inflammation. Compression and stability result in rapid osseous union, immobilization in plaster cast is not necessary, free joints of the hand can be exercised, the fixator is removed in an outpatient department and the minimal presence of metal material does not interfere with good healing of soft tissues. Therefore this method has all merits to be used for surgery in a terrain affected by rheumatic, inflammatory or potentially inflammatory lesions.

Adult↗

Knee arthrodesis in the treatment of failed total knee replacement.

Twenty-six primary arthrodeses and 6 repeat arthrodeses were done for a total of 32 arthrodesis procedures in 26 patients, with followup from 2 to 10 years (mean, 4 years). The indications for arthrodesis were septic failure in 18 patients and aseptic loosening in 8 patients. Thirteen arthrodeses were done using external fixators, and 12 arthrodeses were done using a closed fluted intramedullary nail for fixation (1 arthrodesis was done with a custom proximal and distal interlocked nail). In addition, 6 repeat arthrodeses with intramedullary nail fixation were done for treatment of nonunions after external fixation. Five (38%) of the 13 patients who underwent arthrodesis with an external fixator had clinical and radiographic union at a mean of 5 months. All 13 patients with primary intramedullary nail arthrodesis achieved union. The knees of the 6 patients with nonunions after external fixation that were treated with repeat intramedullary nail arthrodesis achieved union. Patients with septic failure had staged debridements before intramedullary nail arthrodesis. Intramedullary nail arthrodesis can be done safely in patients with sepsis as a staged procedure. Knee arthrodesis using intramedullary nail fixation gives a much higher union rate than does external fixation and is associated with fewer complications.

Aged↗

Failed anterior cervical discectomy and arthrodesis. Analysis and treatment of thirty-five patients.

Thirty-five patients were managed operatively after failure of an anterior cervical discectomy and arthrodesis. Failure was classified as the absence of fusion without deformity but with neck pain or radiculopathy, or both; the absence of fusion after anterior or posterior dislodgment of the graft; or kyphosis due to collapse of the graft or to an unrecognized posterior soft-tissue injury. Twenty-three patients had failure of the arthrodesis without deformity (with neck pain only, neck and arm pain, radiculopathy, or myelopathy). Four patients had dislodgment of the graft; in two of them the graft migrated anteriorly after a multilevel Robinson arthrodesis, and in two it migrated posteriorly after a Cloward arthrodesis. Eight patients had a failure because of a kyphotic deformity. Five of them had had a Cloward arthrodesis; one, a discectomy; and two, a Robinson arthrodesis. Six had received allograft bone. Operative treatment of the pseudarthrosis consisted of repeat resection of the disc space in the area of the failed arthrodesis followed by repeat anterior Robinson arthrodesis with decompression of the nerve root if the patient had radiculopathy. It consisted of anterior corpectomy or vertebral-body resection and strut-grafting with reduction of the deformity if the patient had migration of the graft and kyphosis. The reoperations were performed four months to fourteen years (average, thirty-two months) after the initial operation. The duration of follow-up after the second operation averaged forty-four months (range, twenty-four to 216 months). The result was excellent for twenty-nine patients, good for one, fair for four, and poor for one. We concluded that, in patients who have persistent symptoms after an anterior cervical arthrodesis, an excellent result can be achieved with repeat anterior decompression and autogenous bone-grafting.

Adult↗

Serum levels of nickel and chromium after instrumented posterior spinal arthrodesis.

STUDY DESIGN: Cross-sectional study of 37 patients to measure serum levels of nickel and chromium after posterior spinal arthrodesis using stainless steel implants. OBJECTIVES: To investigate the relationship between factors such as age, gender, pain, time from surgery, length of arthrodesis, and level of arthrodesis to serum metal ion levels after instrumented spinal arthrodesis. SUMMARY OF BACKGROUND DATA: Measurable levels of metal ions in the serum can be detected after the use of stainless steel implants. There is some evidence to suggest that long-term exposure can potentially be toxic. Posterior spinal arthrodesis with stainless steel implants is a common procedure to treat spinal deformity in the adolescent population; however, the extent of metal ion exposure after posterior spinal arthrodesis is unknown. METHODS: Patients that underwent posterior instrumented spinal arthrodesis with more than 6 months follow-up were recruited for this study. Patients with altered neurologic function were excluded. Serum levels of nickel and chromium were measured using inductively coupled plasma mass spectrometry. Pain was assessed using the Oswestry questionnaire. Spine radiographs were used to look for evidence of pseudarthrosis. Forty-five patients were approached, and 37 agreed to the questionnaire and blood test. Ten patients were men and 27 were women. Mean age at surgery was 14 years with mean follow-up of 6 years. Statistical correlations between serum metal ion levels and age at surgery, time from surgery, gender, number of segments fused, spinal instrument interfaces, pain, and instrumentation type were assessed. RESULTS: Abnormally high levels of nickel and chromium above normal levels (0.3 ng/mL for nickel, 0.15 ng/mL for chromium) could be detected in serum after posterior spinal arthrodesis using stainless steel implants. There was a significant inverse correlation between serum nickel (r = -0.61, P < 0.001) and chromium (r = -0.64, P < 0.001) levels and time from surgery. When patients were grouped based on lengths of time from surgery, 0 to 2 years (n = 7), 2 to 4 years (n = 11), and >4 years (n = 8), the mean +/- SD for nickel (ng/mL) was 3.8 +/- 2.6, 1.3 +/- 1.1, and 0.9 +/- 0.8, respectively. Analysis ofvariance revealed significant group differences (P =0.004). Similarly, the chromium levels were 2.7 +/- 2.7, 0.6 +/- 0.4, and 0.3 +/- 0.3, respectively (P = 0.018). Only time from surgery was a significant multivariate predictor of nickel and chromium serum levels. Pseudarthrosis was not seen in this cohort. CONCLUSIONS: Elevated levels of nickel and chromium can be measured after posterior instrumented spinal arthrodesis. The levels diminish rapidly with time from surgery but still remained above normal levels 4 years after surgery. Long-term implication of this metal ion exposure is unknown and should be studied further.

Adolescent↗

Radiculopathy and myelopathy at segments adjacent to the site of a previous anterior cervical arthrodesis.

BACKGROUND: We studied the incidence, prevalence, and radiographic progression of symptomatic adjacent-segment disease, which we defined as the development of new radiculopathy or myelopathy referable to a motion segment adjacent to the site of a previous anterior arthrodesis of the cervical spine. METHODS: A consecutive series of 374 patients who had a total of 409 anterior cervical arthrodeses for the treatment of cervical spondylosis with radiculopathy or myelopathy, or both, were followed for a maximum of twenty-one years after the operation. The annual incidence of symptomatic adjacent-segment disease was defined as the percentage of patients who had been disease-free at the start of a given year of follow-up in whom new disease developed during that year. The prevalence was defined as the percentage of all patients in whom symptomatic adjacent-segment disease developed within a given period of follow-up. The natural history of the disease was predicted with use of a Kaplan-Meier survivorship analysis. The hypothesis that new disease at an adjacent level is more likely to develop following a multilevel arthrodesis than it is following a single-level arthrodesis was tested with logistic regression. RESULTS: Symptomatic adjacent-segment disease occurred at a relatively constant incidence of 2.9 percent per year (range, 0.0 to 4.8 percent per year) during the ten years after the operation. Survivorship analysis predicted that 25.6 percent of the patients (95 percent confidence interval, 20 to 32 percent) who had an anterior cervical arthrodesis would have new disease at an adjacent level within ten years after the operation. There were highly significant differences among the motion segments with regard to the likelihood of symptomatic adjacent-segment disease (p<0.0001); the greatest risk was at the interspaces between the fifth and sixth and between the sixth and seventh cervical vertebrae. Contrary to our hypothesis, we found that the risk of new disease at an adjacent level was significantly lower following a multilevel arthrodesis than it was following a single-level arthrodesis (p<0.001). More than two-thirds of all patients in whom the new disease developed had failure of nonoperative management and needed additional operative procedures. CONCLUSIONS: Symptomatic adjacent-segment disease may affect more than one-fourth of all patients within ten years after an anterior cervical arthrodesis. A single-level arthrodesis involving the fifth or sixth cervical vertebra and preexisting radiographic evidence of degeneration at adjacent levels appear to be the greatest risk factors for new disease. Therefore, we believe that all degenerated segments causing radiculopathy or myelopathy should be included in an anterior cervical arthrodesis. Although our findings suggest that symptomatic adjacent-segment disease is the result of progressive spondylosis, patients should be informed of the substantial possibility that new disease will develop at an adjacent level over the long term.

Adolescent↗

[Shoulder arthrodesis. Indications, techniques, results, complications].

Besides the paralysis of shoulder muscles, large rotator cuff tears beyond repair, persistent shoulder instability with repeat dislocations and resection cases are recent indications for shoulder arthrodesis. The fusion of the shoulder is particularly useful since, despite immobilization of the glenohumeral and acromiohumeral joints, no loss of function is experienced; on the contrary, in many cases an increase of active total mobility may occur. According to the functional outcome, the majority of reports vary between 30 degrees and 90 degrees of active abduction and forward flexion with a mean value of about 60 degrees The most generally accepted arthrodesis position is 20 degrees -40 degrees abduction, forward flexion and internal rotation in relation to the trunk. This position results in a maximum development of muscle power and ensures that the arm will rest comfortably at the side, and that the scapula will not protrude. This also allows the hand to reach the head and facial region. The literature is not confined to any uniform type of arthrodesis and it would appear that the techniques and configurations of material vary considerably. A general advantage of any one particular form of arthrodesis, and the use of plates, screws or external fixators, cannot be deduced. Pseudarthrosis appears to be less frequent in cases of plate arthrodesis compared to screw arthrodesis. However, the application of plates more often results in infections, postoperative fractures of the humerus and the necessary removal of material. Screw arthrodesis is more beneficial in that the exposed area to be operated is smaller than in plate arthrodesis. Postoperative immobilization is more time consuming and, therefore, constitutes one of the disadvantages of screw fixation.

Adolescent↗

Finite element analysis of the initial stability of ankle arthrodesis with internal fixation: flat cut versus intact joint contours.

OBJECTIVE: Qualitative comparison of the initial stability provided by two joint preparation techniques and various screw configurations in ankle arthrodesis, using the finite element method.Design. A three-dimensional model of a healthy ankle was developed from computed tomography images. Two groups of models were built, one with the joint contours resected to produce flat surfaces, and the second with the joint contours preserved. In each case, a variety of screw orientations were examined. BACKGROUND: Despite the improved results of ankle arthrodesis, failure rates due to non-union are still reported. The initial stability of the arthrodesis construct seems important in the final outcome of the fusion. METHODS: Non-linear contact finite element analyses were performed in the arthrodesis constructs subjected to internal/external torsion and dorsiflexion. Micromotions at the bone-to-bone interface were calculated for frictionless and Coulomb friction contact, and compared for the two joint preparation techniques and screw configurations. RESULTS: Overall lower peak micromotions were predicted when preserving the joint contours both in torsion and dorsiflexion. For both preparation techniques, the lowest micromotions tended to occur with the screws inserted at 30 degrees with respect to the long axis of the tibia, crossing above the fusion site. Inclusion of friction in the models caused a general decrease on the magnitude of the micromotions as compared to the frictionless case, but did not affect the ranking of the models. CONCLUSIONS: The finite element method can be used as a qualitative tool to study the initial stability of ankle arthrodesis, overcoming the difficulties of measuring bone-to-bone interface micromotions experimentally. Better initial stability was predicted for ankle arthrodesis when the joint contours were preserved rather than resected. Crossing the screws above the fusion site at a steeper angle also tended to increase the stability at the fusion site. RELEVANCE: Finite element analyses can help during the pre-operative planning of ankle arthrodesis. When bone density is not compromised, preserving the joint contour and inserting the screws at less than 45 degrees to the long axis of the tibia, crossing over the arthrodesis site, may offer better initial stability.

Ankle Joint↗