Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Cellulose”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29Linked to original sources

Improved electrochemical detection of biogenic amines in Aplysia using base-hydrolyzed cellulose-coated carbon fiber microelectrodes.

A major challenge with electrochemical techniques in vivo, using carbon-fiber microelectrodes, is to achieve sufficient sensitivity to detect the low concentrations of transmitters released by neurons. In particular, when an electrode is inserted into living tissue, its sensitivity is usually substantially decreased as a result of the degradation of the carbon surface by proteins. Here, we show that this decrease can be significantly attenuated by coating the electrode with cellulose acetate. The cellulose film offers a steric barrier that prevents macromolecules from diffusing to the carbon surface and its porosity can be progressively increased by controlled hydrolysis. We compared different cellulose-coated electrodes, either non-hydrolysed or hydrolyzed, in 0.08 N KOH for 10-30 min. We found that dopamine and serotonin detection was blocked by non-hydrolysed cellulose films, but that hydrolysis restored optimal detection similar to uncoated electrodes. Moreover, cellulose films (hydrolyzed for 20 min) significantly diminished electrode degradation in vivo and allowed reliable detection of fast concentration changes with <0.5 s delay, compared to uncoated electrodes. Finally, the sensitivity to endogenous 5-HT release in Aplysia central nervous system was more than doubled with these electrodes. We conclude that the optimal hydrolysis time of cellulose-coated electrodes is approximately 20 min with our protocol and carbon fiber electrodes prepared with this method offer improved sensitivity for the detection of biogenic amines.

Animals↗

13C and 1H NMR study of cellulose metabolism by Fibrobacter succinogenes S85.

Fibrobacter succinogenes S85, a cellulolytic rumen bacterium, is very efficient in degrading lignocellulosic substrates and could be used to develop a biotechnological process for the treatment of wastes. In this work, the metabolism of cellulose by F. succinogenes S85 was investigated using in vivo 13C NMR and 13C-filtered spin-echo difference 1H NMR spectroscopy. The degradation of unlabelled cellulose synthesised by Acetobacter xylinum was studied indirectly, in the presence of [1-13C]glucose, by estimating the isotopic dilution of the final bacterial fermentation products (glycogen, succinate, acetate). During the pre-incubation period of F. succinogenes cells with cellulose fibres, some cells ('non-adherent') did not attach to the solid material. Results for 'adherent' cells showed that about one fourth of the glucose units entering F. succinogenes metabolism originated from cellulose degradation. A huge reversal of succinate metabolism pathway and production of large amounts of unlabelled acetate which was observed during incubation with glucose only, was found to be much decreased in the presence of solid substrate. The synthesis of glucose 6-phophate was slightly increased in the presence of cellulose. Results clearly showed that 'non-adherent' cells were able to metabolise glucose very efficiently; consequently the metabolic state of these cells was not responsible for their 'non-adherence' to cellulose fibre.

Acetates↗

Analysis of carboxyl content in oxidized celluloses by solid-state 13C CP/MAS NMR spectroscopy.

A noninvasive method to determine the carboxyl content in oxidized celluloses, using solid-state carbon-13 cross-polarization-magic angle spinning nuclear magnetic resonance (13C CP/MAS NMR) spectroscopy, has been developed. Standard samples containing 0, 4, 8, 12, 16, and 20% carboxyl content were prepared by mixing appropriate amounts of powdered cellulose, a non-oxidized cellulose standard prepared from cotton linter by ball-milling for 96 h, and a commercial oxidized cellulose sample that had a 20% carboxyl content. Standard curves were constructed by plotting the percent carboxyl content against the peak area at 171 ppm, normalized with (i) a peak area at 104 ppm and (ii) the sum of peak areas at 171, 62, and 65 ppm. The regression analysis of the curves yielded a linear relationship with correlation coefficient (R2) values of 0.9868 and 0.9863, respectively. To validate the methods, five new samples of oxidized cellulose were prepared and analyzed. The values obtained were comparable to those determined by the calcium acetate method described in the United States Pharmacopoeia (USP), indicating that the solid-state 13C CP/MAS NMR can be used to analyze carboxyl content in oxidized celluloses.

Acetates↗

Modification of polysaccharides and plant cell wall by endo-1,4-beta-glucanase and cellulose-binding domains.

Cellulose is one of the most abundant polymers in nature. Different living systems evolved simultaneously, using structurally similar proteins to synthesize and metabolize polysaccharides. In the growing plant, cell wall loosening, together with cellulose biosynthesis, enables turgor-driven cell expansion. It has been postulated that endo-1,4-beta-glucanases (EGases) play a central role in these complex activities. Similarly, microorganisms use a consortium of lytic enzymes to convert cellulose into soluble sugars. Most, if not all, cellulases have a modular structure with two or more separate independent functional domains. Binding to cellulose is mediated by a cellulose-binding domain (CBD), whereas the catalytic domain mediates hydrolysis. Today, EGases and CBDs are known to exist in a wide range of species and it is evident that both possess immense potential in modifying polysaccharide materials in-vivo and in-vitro. The hydrolytic function is utilized for polysaccharide degradation in microbial systems and cell wall biogenesis in plants. The CBDs exerts activity that can be utilized for effective degradation of crystalline cellulose, plant cell wall relaxation, expansion and cell wall biosynthesis. Applications range from modulating the architecture of individual cells to an entire organism. These genes, when expressed under specific promoters and appropriate trafficking signals can be used to alter the nutritional value and texture of agricultural crop and their final products. EGases and CBDs may also find applications in the modification of physical and chemical properties of composite materials to create new materials possessing improved properties.

Bacterial Proteins↗

Application of size exclusion electrochromatography to the microanalytical determination of the molecular mass distribution of celluloses from objects of cultural and historical value.

The molecular mass distributions (MMD) of celluloses from paper and other sources were determined by size exclusion electrochromatography (SEEC). Prior to the separation the celluloses were chemically modified with phenyl isocyanate into their tricarbanilate derivatives (CTC). Sensitive UV detection of the CTC could be performed at a wavelength of 210 nm. The solvent used for separation was acetone. With this solvent, a high electroosmotic flow could be generated in columns packed with bare silica particles. With a column packed with particles with a nominal pore size of 30 nm, use of a mobile phase with a salt concentration of 0.1 mM was found to be optimal with respect to mass selectivity and efficiency. The workable mass range under these conditions was from 2 kDa to at least 500 kDa for (native) celluloses. The SEEC method was compared to classical pressure-driven size exclusion chromatography (PD-SEC). It is shown that the two methods give comparable results for the MMD of celluloses, while SEEC has important advantages in terms of speed and sample consumption. With SEEC, the analysis time was less than 20 min. The method was applied for the study of cellulose degradation during (artificial) aging of paper samples. A clear reduction of the average molecular mass of cellulose during aging was observed. With SEEC, the required sample amount is strongly reduced compared to classical PD-SEC. With a single paper fiber (after derivatization), multiple analyses could be carried out. It is argued that this is not only important for the analysis of unique objects but that it also allows the detection of MMD heterogeneities on a microscale. The strong reduction in sample size may be relevant when local heterogeneities in other types of polymer samples are studied.

Cellulose↗

Conjugation and modeled structure/function analysis of lysozyme on glycine esterified cotton cellulose-fibers.

The antimicrobial activity of lysozyme covalently bound to glycine-derivatized cotton cellulose was assessed in a 96-well format. Lysozyme was immobilized on glycine-bound cotton through a carbodiimide reaction. The attachment to cotton fibers was made through both a single glycine and a glycine dipeptide esterified to cotton cellulose. Higher levels of lysozyme incorporation were evident in the diglycine-linked cotton cellulose samples. The antibacterial activity of the lysozyme-conjugated cotton cellulose against Bacillus subtilis was assessed as a suspension of pulverized cotton fibers in microtiter wells. Inhibition of B. subtilis growth was observed to be optimal within a range of 0.14-0.3 mM (equivalent to 4-20 mg of lysozyme-bound cotton/mL) of lysozyme. Enhancement of activity over soluble lysozyme may result from the solid-phase protection afforded by the cellulose linkage of the glycoprotein against proteolytic lysis. Computational models of lysozyme based on its crystal structure attached through aspartate, glutamate, and COOH-terminal residues to cellopentaose-(3) Gly-O-6-glycyl-glycine ester were constructed. The models demonstrate no steric constraints to the active-site cleft from the glycine-conjugated cellulose chain when lysozyme is bound at the carboxylates of Asp-87, Glu-7, Asp-119, Asp-18, and COOH-terminal Leu-129. The more robust antibacterial activity of the enzyme when bonded to cotton fibers suggests good potential for biologically active enzymes on cotton-based fabrics.

Anti-Bacterial Agents↗

Periodate oxidation of crystalline cellulose.

Conversion of 1,2-dihydroxyl groups to dialdehyde by periodate oxidation is a useful method of derivatizing polysaccharides but has not been extensively utilized in derivatization of cellulose because of complicacy due to the crystalline nature of cellulose. To understand the influence of cellulose crystallinity on this reaction, we investigated how the periodate oxidation proceeds with a highly crystalline cellulose of the marine alga Cladophora sp. The crystallinity of the oxidized cellulose, determined by X-ray diffraction, decreased according to the oxidation level. The half-height widths of equatorial diffraction peaks were nearly unchanged. The solid-state 13C NMR spectra did not show peaks corresponding to aldehyde groups, but solution 13C NMR spectra showed the presence of dicarboxylic groups after subsequent oxidation by sodium chlorite. Transmission electron microscopy showed that microfibrils of Cladophora tended to be bent and more flexible than the original sample. Gold labeling of the aldehyde groups, mediated by thiosemicarbazide derivatization, revealed a highly uneven distribution of dialdehyde groups. When treated by 50% (w/v) sulfuric acid, partially oxidized Cladophora cellulose gave many short fragments of microfibril. These features indicate that the periodate oxidation proceeds by forming dialdehyde groups in longitudinally spaced, bandlike domains.

Aldehydes↗

Graft copolymerization of acrylonitrile and ethyl methacrylate comonomers on cellulose using ceric ions.

The graft copolymerization of acrylonitrile and ethyl methacrylate from their binary mixtures onto cellulose has been carried out in the presence of Ce(IV) ions in acidic media at 30 +/- 0.1 degrees C. The graft copolymerization has shown an increasing trend on increasing the feed molarity of the comonomers and on increasing the reaction time. The analysis of grafted cellulose prepared with different feed compositions (f(AN)) has clearly indicated the existence of the synergistic effect of ethyl methacrylate on acrylonitrile which normally shows poor affinity for grafting on cellulose while used individually. The elemental analysis and IR data were used to determine the composition of grafted copolymers and reactivity ratios (r(1), r(2)) of the monomers using the Mayo and Lewis method. The reactivity ratios for acrylontrile and ethyl methacrylate have been found to be 0.68 and 1.15, respectively, which supported the alternate arrangement of the monomer blocks of individual monomers in the grafted chains. The rate of grafting has shown a square dependence on the concentration of the comonomers within the studied range of feed molarity from 0.5 to 2.5 mol dm(-3). The grafting data were used to calculate the number of grafted chains (N(g)), frequency of grafting (G(F)) per molecule of the cellulose and efficiency of grafting (G(E)). The variation in these parameters as a function of feed molarity, feed composition, and ceric ion concentration has been determined. The rate of ceric ion disappearance as a function of feed molarity and reaction time has provided strong support to consider the participation of ceric ions in the formation of free radicals at the backbone of the cellulose. On the basis of the experimental observations, reaction steps for grafting of monomers on cellulose have been proposed.

Acrylonitrile↗

Synthesis, characterization, and mesophase formation of phenylacetoxy cellulose and its halogenated derivatives.

A series of phenylacetoxy cellulosics with degrees of substitution (DS) between 1.4 and 3.0 and different halogenation (2-chloro, 3-chloro, 4-chloro, 2,4-dichloro, 3,4-dichloro, and 4-bromo) were synthesized. All the prepared phenylacetoxy cellulosics were soluble in dimethylformamide (DMF) and DMAc. The solubility increased with increasing DS. Mesophases were observed for all of the phenylacetoxy cellulosics with low to medium DS (DS < 2.5) in DMF and DMAc. Non- or mono-halogeneated phenylacetoxy cellulosics with high DS (DS > 1.9) were soluble in methylene chloride (CH2Cl2), whereas those with very low DS or di-halogenation on the phenyl ring were only slightly swollen or partially soluble in CH2Cl2. Non- and mono-halogenated phenylacetoxy cellulosics were soluble in DMSO and formed liquid crystals regardless of the DS, in contrast to CH2Cl2 solutions which display liquid crystalline behavior at medium to high DS (DS > 1.9) only. The solubility of the di-halogenated phenylacetoxy cellulosics in DMSO was limited to approximately 40 wt %.

Cellulose↗

Influence of the supramolecular structure and physicochemical properties of cellulose on its dissolution in a lithium chloride/N,N-dimethylacetamide solvent system.

The present work deals with the effects of structural variables of celluloses on their dissolution in the solvent system LiCl/N,N-dimethylacetamide, LiCl/DMAc. Celluloses from fast growing sources (sisal and linters), as well as microcrystalline cellulose (avicel PH-101) were studied. The following structural variables were investigated: index of crystallinity, I(c); crystallite size; polymer porosity; and degree of polymerization determined by viscosity, DPv. Mercerization of fibrous celluloses was found to decrease DPv, I(c), the specific surface area, and the ratio pore volume/radius. The relevance of the structural properties of cellulose to its dissolution is discussed. Rate constants and activation parameters of cellulose decrystallization, prior to its solubilization, have been determined under nonisothermal conditions. The kinetic parameters calculated showed that dissolution is accompanied with small, negative enthalpy and a large, negative entropy of activation.

Acetamides↗

Direct force measurements between cellulose surfaces and colloidal silica particles.

The interaction of cellulose layers with colloidal silica particles was investigated by direct force measurements with the atomic force microscope (AFM). Upon approach, repulsive forces were found between the negatively charged silica particles and the cellulose surface. The forces were interpreted quantitatively in terms of electrostatic interactions due to overlap of diffuse layers originating from negatively charged carboxylic groups on the cellulose surface. The diffuse layer charge density of cellulose was estimated to be 0.80 mC/m2 at pH 9.5 and 0.21 mC/m2 at pH 4. The forces upon retraction are characterized by molecular adhesion events, whereby individual cellulose chains desorb from the probe surface. The retraction profiles are dominated by well-defined force plateaus, which correspond to single-chain desorption forces of 35-42 pN. We surmise that adsorption of cellulose to probe surfaces is dominated by nonelectrostatic forces, probably originating from hydrogen bonding. Electrostatic contributions to desorption force could be detected only at high pH, where the silica surface is highly charged.

Adsorption↗

Homogeneous suspensions of individualized microfibrils from TEMPO-catalyzed oxidation of native cellulose.

Never-dried native celluloses (bleached sulfite wood pulp, cotton, tunicin, and bacterial cellulose) were disintegrated into individual microfibrils after oxidation mediated by the 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) radical followed by a homogenizing mechanical treatment. When oxidized with 3.6 mmol of NaClO per gram of cellulose, almost the totality of sulfite wood pulp and cotton were readily disintegrated into long individual microfibrils by a treatment with a Waring Blendor, yielding transparent and highly viscous suspensions. When observed by transmission electron microscopy, the wood pulp and cotton microfibrils exhibited a regular width of 3-5 nm. Tunicin and bacterial cellulose could be disintegrated by sonication. A bulk degree of oxidation of about 0.2 per one anhydroglucose unit of cellulose was necessary for a smooth disintegration of sulfite wood pulp, whereas only small amounts of independent microfibrils were obtained at lower oxidation levels. This limiting degree of oxidation decreased in the following order: sulfite wood pulp > cotton > bacterial cellulose, tunicin.

Catalysis↗

Activity studies of immobilized subtilisin on functionalized pure cellulose-based membranes.

The activity of immobilized subtilisin BPN' on pure cellulose-based membrane support was investigated using site-directed and random immobilization approaches. The catalytic activity of site-directed immobilized subtilisin on pure cellulose fiber-based materials was found to be 81% of that in homogeneous solution, while that of randomly immobilized subtilisin was 27%. Pure cellulose membrane supports provided large surface areas for high enzyme loading without diffusional limitations. The activity of immobilized subtilisin on pure cellulose support was more than twice that on a modified polyether sulfone (MPS) membrane, which was attributed to the higher hydrophilicity of cellulose. Immobilized subtilisin maintained its initial activity for 14 days at 4 degrees C and 7 days at 24 degrees C. The immobilized enzyme could resist higher temperature and operate over a wider range of pH without loss of activity. This study showed that pure cellulose fiber-based membranes are well suited for enzyme immobilization and biocatalysis.

Affinity Labels↗

Enhancement of cellulase activity by clones selected from the combinatorial library of the cellulose-binding domain by cell surface engineering.

To improve the cellulolytic activity of a yeast strain displaying endoglucanase IotaIota (EG II) from Trichoderma reesei, a combinatorial library of the cellulose-binding domain (CBD) of EG II was constructed by using cell surface engineering. When EG II degrades celluloses, CBD binds to cellulose, and its catalytic domain cleaves the glycosidic bonds of cellulose. CBD had a flat face, composed of five amino acids for binding. It was supposed that the three hydrophobic amino acid residues of the five amino acid residues were essential for binding to cellulose. Therefore, by improving the two remaining amino acid residues, construction of mutants with a combinatorial library of the two amino acids in CBD was carried out and binding ability and hydrolysis activity were measured. In the first screening by halo assay using the Congo Red staining method, about 200 of the 2000 colonies formed clear halos, and then five colonies with the clearest halos were finally selected. In the second screening, the binding ability of the five mutants to phosphoric acid-swollen Avicel was measured. In addition, the measurement of hydrolysis activity toward carboxymethylcellulose (CMC) using the screened mutants was carried out. As a result, the mutated EG II exhibiting higher binding ability (1.5-fold) had higher hydrolysis activity (1.3-fold) compared to the parent EG II-displaying yeast cell, demonstrating that CBD has confirmatively some effect on the cellulase activity through its binding ability of the enzyme to cellulose.

Binding Sites↗

Energy efficient production of hydrogen and syngas from biomass: development of low-temperature catalytic process for cellulose gasification.

The Rh/CeO2/M (M = SiO2, Al2O3, and ZrO2) type catalysts with various compositions have been prepared and investigated in the gasification of cellulose, a model compound of biomass, in a fluidized bed reactor at 500-700 degrees C. The conventional nickel and dolomite catalysts have also been investigated. Among the catalysts, Rh/CeO2/SiO2 with 35% CeO2 has been found to be the best catalyst with respect to the carbon conversion to gas and product distribution. The steam addition contributed to the complete conversion of cellulose to gas even at 600 degrees C. Lower steam supply gave the syngas and higher steam supply gave the hydrogen as the major product. Hydrogen and syngas from cellulose or cellulosic biomass gasification are environmentally super clean gaseous fuels for power generation. Moreover, the syngas derived liquid fuels such as methanol, dimethyl ether, and synthetic diesels are also super clean transportation fuels. However, the use of cellulose or cellulosic biomass for energy source through the gasification is challenging because of the formation of tar and char during the gasification process. It is interesting that no tar or char was finally formed in the effluent gas at as low as 500-600 degrees C using Rh/CeO2/SiO2(35) catalyst in this process.

Bioelectric Energy Sources↗

Cellulose-based chromatography for cellooligosaccharide production.

The potential of using cellulose stationary phases for the chromatographic fractionation of cellooligosaccharide preparations has been explored. The impetus for the work is the current interest in using cellooligosaccharides as functional nondigestible oligosaccharides in foods. The conceptual studies illustrate the potential of using ethanol-water mobile phases in conjunction with cellulose stationary phases for cellooligosaccharide fractionation. Cellooligosaccharide solubility in ethanol-water mixtures and their elution order from cellulose-based columns using ethanol-water mobile phases were shown to be in line with their degree of polymerization (DP), with the higher DP cellooligosaccharides being less soluble and having longer retention times. The retention volume for all COS increased with increased temperature. Both microcrystalline and fibrous cellulose preparations were shown to work as chromatographic stationary phases. The application experiments demonstrate the potential of using cellulose stationary phases for the cleanup and fractionation of cellooligosaccharide mixtures generated via acid-catalyzed hydrolysis of cellulose.

Cellulose↗

Isolation and characterization of cellulose obtained from ultrasonic irradiated sugarcane bagasse.

Cell walls of sugarcane bagasse were first delignified with chlorite followed by ultrasonic irradiation and then by two-step sequential extractions at 23 degrees C with 15 and 18% KOH for 2 h, 15 and 18% NaOH for 2 h, 8 and 10% KOH for 12 h, and 8 and 10% NaOH for 12 h and by a single one-stage isolation with 10% KOH for 16 h and with 10% NaOH for 16 h, which released 79.4, 81.8, 83.6, 85.7, 61.5, and 65.6% of the original hemicelluloses, and subsequently yielded 50.7, 49.5, 48.6, 47.8, 57.2, and 55.4% of the cellulose, respectively. The six cellulosic preparations were free of bound lignin and had a purity of 77.1-90.1% with the intrinsic viscosity (eta), viscosity average degree of polymerization, and molecular weight (M(w)) ranging from 534.1 to 631.6 mL g(-1), from 1858.1 to 2238.2 mL g(-1), and from 301000 to 362600 g mol(-1), respectively. The structural features of the isolated six cellulosic samples were comparatively examined by Fourier transform infrared and cross-polarization/magic angle spinning (13)C NMR spectroscopy and X-ray diffraction, and their thermal stability was investigated by using thermogravimetric analysis. It was found that all of the cellulosic preparations have the typical cellulose I structure but the crystallinity of the SCB cellulose was lower than that of flax, cotton, and kenaf.

Cellulose↗

Theoretical and experimental studies on the adsorption of aromatic compounds onto cellulose.

The adsorption of several aromatic compounds over microcrystalline cellulose was studied by molecular modeling and experimentally using gas chromatography. Experimental adsorption enthalpies were obtained from an equation based on Clausius-Clapeyron formalism and the temperature dependence of retention volume at infinite dilution. Four different cellulose surfaces (three crystalline (110, 100, and 010) and one amorphous) were modeled. Overall strong agreement was observed between the experimental and theoretical work with 84% of the adsorbate-cellulose systems having differences between measured and predicted values of less than 20%. Based on both calculated and experimental data, a morphology for the microcrystalline cellulose as a weighted combination of the four surfaces was proposed: 39% (110), 28% (100), 10% (010), and 23% amorphous. By adopting this distribution, differences between experimental and weighted average predicted adsorption energies were 10% or less for 14 out of 17 compounds; a maximum of 15% was observed for guaiacol. Experimental results for monosubstituted aromatic compounds revealed that adsorption enthalpies are related to the hydrophilic/hydrophobic character of the substituent groups: 3.5 kJ mol(-1) for a methyl group, 15.7 kJ mol(-1) for a double bond, 21.0 kJ mol(-1) for a methoxyl group, 22.8 kJ mol(-1) for a carbonyl group, and 27.6 kJ mol(-1) for a hydroxyl group. These tendencies were confirmed by modeling, except for the aldehyde carbonyl group, where an overestimation of 10.8 kJ mol(-1) was observed. Analysis of experimental and predicted adsorption enthalpies of multisubstituted aromatic compounds suggests that the efficiency of their interaction with cellulose depends on a compromise between the roughness of the cellulose surface and their conformational adaptability.

Adsorption↗