Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Wettability”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28Linked to original sources
PubMed2004

Adsorption of poly(vinyl alcohol) from water to a hydrophobic surface: effects of molecular weight, degree of hydrolysis, salt, and temperature.

The adsorption of poly(vinyl alcohol) (PVOH) from aqueous solutions to a silicon-supported fluoroalkyl monolayer is described. Thickness, wettability, and roughness of adsorbed films are studied as a function of polymer molecular weight, degree of hydrolysis (from the precursor, poly(vinyl acetate)), polymer concentration, salt type and concentration, and temperature. The data suggest a two-stage process for adsorption of the polymer: physisorption due to a hydrophobic effect (decrease in interfacial free energy) and subsequent stabilization of the adsorbed layer due to crystallization of the polymer. Adsorption of lower-molecular-weight polymers results in thicker films than those prepared with a higher molecular weight; this is ascribed to better crystallization of more mobile short chains. Higher contents of unhydrolyzed acetate groups on the poly(vinyl alcohol) chain lead to thicker adsorbed films. Residual acetate groups partition to the outermost surface of the films and determine wettability. Salts, including sodium chloride and sodium sulfate, promote adsorption, which results in thicker films; at the same time, their presence over a wide concentration range leads to formation of rough coatings. Sodium thiocyanate has little effect on PVOH adsorption, only slightly reducing the thickness in a 2 M salt solution. Increased temperature promotes adsorption in the presence of salt, but has little effect on salt-free solutions. Evidently, higher temperatures favor adsorption but cause crystallization to be less thermodynamically favorable. These competing effects result in the smoothest coatings being formed in an intermediate temperature range.

Adsorption↗
PubMed2004

Pervaporation from a dense membrane: roles of permeant-membrane interactions, Kelvin effect, and membrane swelling.

Dense polymeric membranes with extremely small pores in the form of free volume are used widely in the pervaporative separation of liquid mixtures. The membrane permeation of a component followed by its vaporization on the opposite face is governed by the solubility and downstream pressure. We measured the evaporative flux of pure methanol and 2-propanol using dense membranes with different free volumes and different affinities (wettabilities and solubilities) for the permeant. Interestingly, the evaporative flux for different membranes vanished substantially (10-75%) below the equilibrium vapor pressure in the bulk. The discrepancy was larger for a smaller pore size and for more wettable membranes (higher positive spreading coefficients). This observation, which cannot be explained by the existing (mostly solution-diffusion type) models ofpervaporation, suggests an important role for the membrane-permeant interactions in nanopores that can lower the equilibrium vapor pressure. The pore sizes, as estimated from the positron annihilation, ranged from 0.2 to 0.6 nm for the dry membranes. Solubilities of methanol in different composite membranes were estimated from the Flory-Huggins theory. The interaction parameter was obtained from the surface properties measured by the contact angle goniometry in conjunction with the acid-base theory of polar surface interactions. For the membranes examined, the increase in the "wet" pore volume due to membrane swelling correlates almost linearly with the solubility of methanol in these membranes. Indeed, the observations are found to be consistent with the lowering of the equilibrium vapor pressure on the basis of the Kelvin equation. Thus, a higher solubility or selectivity of a membrane also implies stronger permeant-membrane interactions and a greater retention of the permeant by the membrane, thus decreasing its evaporative flux. This observation has important implications for the interpretation of existing experiments and in the separation of liquid mixtures by pervaporation.

Journal Article↗
PubMed2006

Lateral capillary forces between solid bodies on liquid surface: a lattice Boltzmann study.

When two solid bodies are placed on the surface of a dense liquid under gravitation, they deform the liquid surface to experience a lateral capillary force between themselves that can be attractive and repulsive, depending on the wettabilities and weights of the bodies. In the present study, the lateral capillary force between two square bodies at a liquid-vapor interface has been examined using numerical simulations based on a two-dimensional two-phase lattice Boltzmann (LB) method. The particular situations were simulated, where every body was vertically constrained and had the fixed triple points at its upper or lower corners. Here, the triple point indicates the place at which vapor, liquid, and solid phases meet. The interaction force between these two bodies was calculated as a function of the separation distance, the interfacial tension, and the gravitational acceleration. The simulation results agree well with the analytical expression of the lateral capillary interaction, indicating that our LB method can reproduce the interaction force between two bodies of various wettabilities at a liquid-vapor interface in mechanical equilibrium.

Journal Article↗
PubMed2005

Dynamics of imbibition into a pore with a heterogeneous surface.

We use large-scale molecular dynamics simulations to study the dynamics of liquid penetration into a cylindrical pore having a randomly heterogeneous surface comprising areas of differing wettability. Our results confirm that the equilibrium contact angle in the heterogeneous pore is well described by Cassie's law. As in the case of the uniform pore studied previously, the dynamics of penetration can be described by the Lucas-Washburn equation corrected to include the effect of a dynamic contact angle. The dissipation at the three-phase line, which gives rise to the dynamic contact angle, may be characterized in terms of a friction coefficient. Interestingly, the wetting-line friction on the heterogeneous surface also turns out to be a linear function of the fractional concentration of the areas of different wettability, analogous to Cassie's law. These results can be interpreted in terms of an independent random walk mechanism.

Journal Article↗
PubMed2005

Surface-active particles with microstructured surfaces.

Interfaces adsorbing solid particles have recently attracted great attentions in the field of materials science, because they are useful as templates of well-ordered particle arrays or of microstructured hollow spheres. The solid particles are adsorbed at the interfaces and form self-assembled structures when the particles have suitable wettability to both fluids. Here, we show theoretically how the microstructure on the particle surface affects their adsorption properties. The physical properties of the interface adsorbing a particle will be described with consideration for surface area magnification due to the microstructure. The microstructure on the surface changes drastically the wettability and the equilibrium position of the adsorbed particle and prevents the particle from adsorption at the interface. The range of the interfacial tensions at which the particle is adsorbed becomes narrower with the increase of the magnification. On the other hand, the particle which is partially covered with the microstructured surface is adsorbed firmly at the interface in an oriented state. We should consider not only the interfacial tensions but also the surface structure to control the adsorption behavior of the particle.

Journal Article↗
PubMed2006

Thermal modulated interaction of aqueous steroids using polymer-grafted capillaries.

Poly(N-isopropylacrylamide) (PIPAAm) of controlled molecular weight was densely grafted onto glass capillary lumenal surfaces using surface-initiated atom transfer radical polymerization (ATRP). Temperature-dependent changes of these thermoresponsive brush surfaces with hydrophobic steroids were investigated by exploiting thermoresponsive aqueous wettability changes of the polymer-modified surfaces in microfluidic systems. IPAAm was polymerized on ATRP initiator-immobilized glass surfaces using CuCl/CuCl(2)/tris(dimethylaminoethyl)amine (Me(6)TREN) as an ATRP catalyst in water at 25 degrees C. PIPAAm graft layer thickness and its homogeneity on glass surfaces are controlled by changing ATRP reaction time. Aqueous wettability changes of PIPAAm-grafted surfaces responses drastically changed to both grafted polymer layer thickness and temperature, especially at lower temperatures. Temperature-responsive surface properties of these PIPAAm brushes within capillary inner wall surfaces were then investigated using capillary chromatography. Effective interaction of hydrophobic steroids with dehydrated, hydrophobized PIPAAm-grafted capillary surfaces was observed above 30 degrees C without any column packing materials. Steroid elution behavior from PIPAAm-grafted capillaries contrasted sharply with that from PIPAAm hydrogel-grafted porous monolithic silica capillaries prepared by electron beam (EB) irradiation wherein significant peak broadening was observed at high-temperature regardless of sample hydrophobicity factors (log P values), indicating multistep separation modes in coated monolithic silica capillaries. In conclusion, thermoresponsive polymer-grafted capillary inner wall surfaces prepared by ATRP exhibit useful temperature-dependent surface property alterations effective to regulate interactions with biomolecules without requirements for separation bed packing materials within the capillary lumen.

Journal Article↗
PubMed2006

Photocontrolled variations in the wetting capability of photochromic polymers enhanced by surface nanostructuring.

The wetting characteristics of surfaces of polymers doped with photochromic spiropyran molecules can be tuned when irradiated with laser beams of properly chosen photon energy. The hydrophilicity is enhanced upon UV laser irradiation since the embedded nonpolar spiropyran molecules convert to their polar merocyanine isomers. The process is reversed upon green laser irradiation. Structuring of the photochromic polymeric surfaces with soft lithography enhances significantly the hydrophobicity of the system, indicating that the water droplets on the patterned features interact with air that is trapped in the microcavities, thus creating superhydrophobic air-water contact areas. Furthermore, the light-induced wettability variations of the structured surfaces are enhanced by a factor of 3 compared to those on the flat surfaces. This significant enhancement is attributed to the photoinduced reversible volume changes to the imprinted gratings, which additionally contribute to the wettability changes due to the light-induced photochromic interconversions.

Journal Article↗
PubMed2006

Relation between contact angle and the cross-sectional area of small, sessile liquid drops.

In this theoretical study, the cross-sectional areas of small, sessile drops were calculated for solid surfaces with a wide range of wettability. These areas were then used to estimate obstruction of rectangular gas flow channels by sessile liquid drops. Our findings suggest that even a small improvement in wettability (i.e., a lower contact angle) will lead to a substantial decrease in blockage. This work has implications for small channels that contain two-phase flow, such as those found in fuel cells.

Journal Article↗
PubMed2006

Picoliter droplet formation on thin optical fiber tips.

In this paper, we present experimental results on how minute droplets are formed on fiber optic end faces. Results show that reproducible picoliter volumes can be generated when fibers are retracted from an aqueous phase contained under an inert fluorinated immiscible liquid, with a coefficient of variation (CV) of 0.7-2.3%. The droplet formation was analyzed as a function of the fiber diameter, retraction speed, and wettability. Experiments reveal a volume-determining critical equilibrium contact angle between 60 degrees and 75 degrees , defining the onset of fiber end-face dewetting. The dynamics of the droplet snap-off progression was characterized using high-speed imaging in order to explain the observed wettability-volume dependency.

Journal Article↗
PubMed1998

Two-Step Surface Modification of Chemically Resistant Polymers: Blend Formation and Subsequent Chemistry1

Supercritical fluid (SCF) carbon dioxide processing has been studied as a new route to polymer surface modification. Three fluoropolymer substrates were studied: poly(tetrafluoroethylene) (PTFE), poly(chlorotrifluoroethylene) (PCTFE) and poly(tetrafluoroethylene-co-hexafluoropropylene) (FEP) using a two-step modification procedure. In the first step, blends or semiinterpenetrating networks were prepared by carrying out a free radical polymerization of styrene (or styrene with divinylbenzene or triallyl cyanurate) within the SCF-swollen polymer substrate. The second step involved sulfonating the polystyrene using heterogeneous (solution-solid) sulfonation conditions. Composition of the surfaces was determined by X-ray photoelectron spectroscopy, and wettability was assessed using water contact angle measurements. Depressed advancing and receding contact angles indicate increased wettability of all of the fluoropolymer samples.

Journal Article↗
PubMed2000

Nanoscopic channel lattices with controlled anisotropic wetting

Engineered microscopic surface structures allow local control of physical surface properties such as adhesion, friction and wettability. These properties are related both to molecular interactions and the surface topology--for example, selective adsorption and molecular recognition capabilities require controlled anisotropy in the surface properties. Chemistry with extremely small amounts of material has become possible using liquid-guiding channels of sub-micrometre dimensions. Laterally structured surfaces with differing wettabilities may be produced using various techniques, such as microcontact printing, micromachining, photolithography and vapour deposition. Another strategy for introducing anisotropic texture is based on the use of the intrinsic material properties of stretched ultrathin polymer coatings. Here we present a fast and simple method to generate extended patterned surfaces with controlled wetting properties on the nanometre scale, without any lithographic processes. The technique utilizes wetting instabilities that occur when monomolecular layers are transferred onto a solid substrate. The modified surfaces can be used as templates for patterning a wide variety of molecules and nanoclusters into approximately parallel channels, with a spatial density of up to 20,000 cm(-1). We demonstrate the transport properties of these channels for attolitre quantities of liquid.

Journal Article↗
PubMed2006

Phase inversion of particle-stabilized materials from foams to dry water.

Small particles attached to liquid surfaces arise in many products and processes, including crude-oil emulsions and food foams and in flotation, and there is a revival of interest in studying their behaviour. Colloidal particles of suitable wettability adsorb strongly to liquid-liquid and liquid-vapour interfaces, and can be sole stabilizers of emulsions and foams, respectively. New materials, including colloidosomes, anisotropic particles and porous solids, have been prepared by assembling particles at such interfaces. Phase inversion of particle-stabilized emulsions from oil in water to water in oil can be achieved either by variation of the particle hydrophobicity (transitional) or by variation of the oil/water ratio (catastrophic). Here we describe the phase inversion of particle-stabilized air-water systems, from air-in-water foams to water-in-air powders and vice versa. This inversion can be driven either by a progressive change in silica-particle hydrophobicity at constant air/water ratio or by changing the air/water ratio at fixed particle wettability, and has not been observed in the corresponding systems stabilized by surfactants. The simplicity of the work is that this novel inversion is achieved in a single system. The resultant materials in which either air or water become encapsulated have potential applications in the food, pharmaceutical and cosmetics industries.

Journal Article↗
PubMed2005

Computer simulation of polypeptide adsorption on model biomaterials.

When biomaterials are inserted in a biological environment, for instance in a body implant, proteins do quickly adsorb on the exposed surface. Such process is of fundamental importance, since it directs the subsequent cell adhesion. Here we review recent advances in this field obtained with molecular simulations. While coarse-grained models can provide important general results, as it has long been recognized in polymer science, the hierarchical structure of a very complex copolymer such as a protein, together with the nature of the biomaterial surface suggest that atomistic models are better suited to investigate these phenomena. Thus, after briefly mentioning some common features of coarse-grained and atomistic force fields, we first discuss early theoretical and coarse-grained simulation results about protein adsorption, and then we highlight the main results recently obtained by us with atomistic models. In particular, we discuss some conformational and energetic aspects of the adsorption of protein fragments with different secondary structure on surfaces of different wettability, including hydrophobic graphite and hydrophilic poly(vinylalcohol). We also consider other features, such as the simulation of the materials wettability, the hydration of the adsorbed fragments, their kinetics of spreading, and the sequential adsorption of two protein fragments on top of each other, highlighting the results of general interest.

Adsorption↗
PubMed2006

Particle-surface capillary forces with disjoining pressure.

A new, atomic force microscopy (AFM) based experimental setup for the continuous acquisition of friction force data as a function of humidity has been developed. The current model of interactions between wet contacts under the influence of capillary effects, has been amended to include a vertical component due to the disjoining pressure and takes into account the influence of liquid films adsorbed on the surface. This is a 'switching' model, i.e. the contact between nanometer-sized sphere and a flat surface can exist in two distinct states due to capillary bridge formation/destruction as the humidity is varied. The model has been qualitatively verified on samples of differing wettability produced by UV-ozone treatment of polystyrene (PS). Results of AFM analysis of the friction vs. vapor pressure curves collected from the surface are presented. Correlation between important surface properties such as wettability, adsorption, and contact angle and friction force under varying humidity were found and discussed.

Microscopy, Atomic Force↗
PubMed1998

Effect of pepper and bismuth subsalicylate on gastric pain and surface hydrophobicity in the rat.

BACKGROUND: The mechanism by which dietary pepper causes dyspepsia and epigastric pain is poorly understood, as is the ability of bismuth subsalicylate (BSS) to relieve these symptoms. AIM: To investigate the ability of black pepper, red pepper and BSS to affect gastric surface hydrophobicity and induce/relieve visceral pain in rat model systems. METHODS: Fasted rats were administered intragastrically Vivonex containing varying concentrations of either black or red pepper (0-200 mg/mL) and gastric contact angles were read after 1-24 h. Some rats were post-treated with BSS (2.0-17.5 mg/mL) and contact angles were read after 2-18 h. To study pain sensitivity in rats treated with pepper/BSS, we compared tail-flick latencies after the application of radiant heat. RESULTS: Both black and red pepper rapidly (< 1 h) induced a decrease in gastric surface hydrophobicity in a dose-dependent fashion. This spice-induced increase in surface wettability was long-lasting, could be enhanced in the presence of ethanol and reversed by post-treating the rats with BSS. Both black and red pepper induced an increase in pain sensitivity, consistent with the presence of gastric pain, which could also be reversed by post-treating the rats with BSS. CONCLUSION: Both black and red pepper may induce epigastric pain by removing the stomach's hydrophobic lining and activating intramucosal pain receptors. BSS may provide relief from postprandial dyspepsia by restoring the stomach's non-wettable properties.

Animals↗
PubMed2006

Kinetics of droplet condensation through a double free-energy barrier.

Results are presented for the kinetics of nucleation of liquid droplets from a one-component vapor phase on a planar lyophobic substrate patterned with a large number of easily wettable (lyophilic) circular domains. If the wettability of these lyophilic domains is characterized by a contact angle smaller than pi2, for intermediate values of the supersaturation, the condensation of a droplet on a lyophilic domain occurs through a free-energy barrier with two maxima, that is, through a double barrier. A simple model is proposed for the kinetics of droplet condensation through a double barrier that combines Kramers's [Physica (Utrecht) 7, 284 (1940)] transition rate theory with known results of nucleation theory. In the framework of this model, the solution is derived for the steady-state limit of the nucleation process. The number of lyophilic domains available for droplet condensation reduces with time as domains are occupied by droplets. The problem of droplet condensation through a double barrier is solved taking into account the effect of the time-dependent depletion in the number of available lyophilic domains.

Journal Article↗
PubMed2002

GpIIb/IIIa is the main receptor for initial platelet adhesion to glass and titanium surfaces in contact with whole blood.

Platelets are the first cells to adhere to a surface in contact with blood and are capable of mediating several different responses after contact with different protein-coated surfaces. They are the main source of growth factors such as platelet-derived growth factor and are therefore important in the healing process. In this study, initial platelet adhesion to and spread on hydrophilic and hydrophobic (methylized) glass and titanium with similar wettability were investigated. Whole coagulating blood was used to simulate the in vivo situation shortly after implantation, in which bleeding precedes inflammation and wound healing. Several different antibodies directed against platelet integrins and receptors (CD9, FcgammaRII, GPIIb/IIIa, vitronectin receptor, GPIb/V/IX) were used in an attempt to block platelet adhesion to the surfaces. Immunofluorescence results show that initial platelet adhesion to all the surfaces we investigated can be almost completely inhibited (approximately 95%) by clone M148, an antibody against the GPIIb/IIIa complex (integrin alpha(IIb)beta(3); CD41/CD61), but not with other antibodies to the separate parts of the integrin. Antibodies known to inhibit fibrinogen binding to GPIIb/IIIa after adenosine diphosphate- and collagen- induced aggregation had very little effect on initial platelet adhesion. None of the other integrins were found to have such an effect on initial platelet adhesion. Antibody clone M148 was furthermore found to inhibit platelet spreading. This study shows that regardless of wettability and the biomaterial used, initial adhesion of platelets appears to be mediated by GPIIb/IIIa binding to surface adsorbed fibrinogen.

Adenosine Diphosphate↗
PubMed2005

Solid state and dissolution rate characterization of co-ground mixtures of nifedipine and hydrophilic carriers.

Co-ground powders of the poorly water-soluble drug nifedipine and a hydrophilic carrier, [partially hydrolyzed gelatin (PHG), polyvinylpyrrolidone (PVP), sodium dodecyl sulfate (SDS), hydroxypropyl methylcellulose (HPMC), polyethylene glycol (PEG), urea or Pluronic F108] were prepared in order to improve the dissolution rate of nifedipine. The effects of type of grinding equipment, grinding time, and type of hydrophilic carrier on the crystallinity of nifedipine (x-ray diffraction and differential scanning calorimetry) on the interaction between drug and carriers (differential scanning calorimetry), on the particle size and appearance (scanning electron microscopy), on the wettability (contact angle measurements), and on the drug release were investigated. Grinding nifedipine together with these carriers improved the dissolution rate. PHG-ground mixtures resulted in the fastest dissolution rate followed by PVP, SDS, HPMC, Pluronic, urea, and PEG. This effect was not only due to particle size reduction, which increased in the order PHG<PEG=SDS<Pluronic<drug<urea<HPMC<PVP, but also resulted from the ability of some carriers (PVP and HPMC) to prevent reaggregation of the finely divided drug particles. PVP, HPMC, and PHG formed a powder with amorphous drug. The carriers improved the wettability of the ground products in the order HPMC<drug<urea<PVP<SDS<PHG<PEG<Pluronic. Differential scanning calorimetry (DSC) measurements gave valuable information about the nature of drug crystallinity and the interactions with the carriers within the ground mixtures.

Calcium Channel Blockers↗