Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Cellulose”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28Linked to original sources

[The effect of cellulose on endogenous nitrogen excretion in rats, evaluated using N-15 technics].

Metabolic faecal nitrogen excretion was assessed in 8 young rats (90-100 g body weight) following an oral application of 75 mg 15N-glycine (95 atom-% 15N). Four rats received an experimental diet containing 12% cellulose, while a control diet containing 4% cellulose was fed to the remaining 4 animals. The high cellulose content induced a highly significant reduction of the N balance due to a greatly increased urinary N excretion. The metabolic faecal nitrogen was determined by measuring 15N excretion in faeces and urine from day 5 (3) to day 8 following 15N glycine administration. During this time interval 15N elimination follows an exponential curve. Increasing the dietary cellulose content from 4 to 12% produced a rise in metabolic faecal nitrogen from 13.9 to 15.7 mg/day and in total faecal nitrogen from 21.3 to 24.4 mg/day. From these values a mean true protein digestibility of 98% was calculated for both groups of rats, regardless of the difference in dietary cellulose content. The fraction of endogenous faecal nitrogen which is of bacterial origin was determined through the analysis of 2, 6-diamino-pimelic acid (DAP). The added cellulose in the experimental diet caused a rise in faecal DAP from 0.302 to 0.402 mg/day corresponding to an increase of bacterial nitrogen from 5.2 to 6.4 mg/day. Accordingly the observed rise in endogenous faecal nitrogen is largely due to increased bacterial nitrogen.

Animals↗

Composites of bacterial cellulose and paper made with a rotating disk bioreactor.

Suspended solids in the nutrient medium for Acetobacter xylinium in a rotating disk bioreactor become incorporated into the gelatinous mat of bacterial cellulose as it forms. Embedding fibers of ordinary cellulose creates composites with enhanced strength and the toughness of bacterial cellulose. Purified cellulose and elongated fibers from paper are incorporated differently than are spherical particles such as silica gel. About 90% of the final cellulose can come from scrap paper, and dried composite sheets were much stronger than plain bacterial cellulose per unit area.

Bioreactors↗

The cellulosome and cellulose degradation by anaerobic bacteria.

Despite its simple chemical composition, cellulose exists in a number of crystalline and amorphous topologies. Its insolubility and heterogeneity makes native cellulose a recalcitrant substrate for enzymatic hydrolysis. Microorganisms meet this challenge with the aid of a multi-enzyme system. Aerobic bacteria produce numerous individual, extra-cellular enzymes with binding modules for different cellulose conformations. Specific enzymes act in synergy to elicit effective hydrolysis. In contrast, anaerobic bacteria possess a unique extracellular multi-enzyme complex, called cellulosome. Up to 11 different enzymes are aligned on the non-catalytic scaffolding protein and thus ensure a high local concentration, together with the correct ratio and order of the components. These multi-enzyme complexes attach both to the cell envelope and to the substrate, mediating the proximity of the cells to the cellulose. Binding to the scaffolding stimulates the activity of each individual component towards the crystalline substrate. The most complex and best investigated cellulosome is that of the thermophilic bacterium Clostridium thermocellum, but a scheme for the cellulosomes of the mesophilic clostridia and the ruminococci emerges. Many crucial details of cellulose hydrolysis are still to be uncovered. Yet, a mechanistic model for the action of enzyme complexes on the surface of insoluble substrates becomes apparent and the application of enzymatic hydrolysis of cellulosic biomass can now be addressed.

Animals↗

Disruption of cellulose synthesis by isoxaben causes tip swelling and disorganizes cortical microtubules in elongating conifer pollen tubes.

In elongating pollen tubes of the conifer Picea abies (Norway spruce), microtubules form a radial array beneath the plasma membrane only at the elongating tip and an array parallel with elongation throughout the tube. Tips specifically swell following microtubule disruption. Here we test whether these radial microtubules coordinate cell wall deposition and maintain tip integrity as tubes elongate. Control pollen tubes contain cellulose throughout the walls, including the tip. Pollen tubes grown in the presence of isoxaben, which disrupts cellulose synthesis, are significantly shorter with a decrease in cellulose throughout the walls. Isoxaben also significantly increases the frequency of tip swelling, with no effect on tube width outside of the swollen tip. The decrease in cellulose is more pronounced in pollen tubes with swollen tips. The effects of isoxaben are reversible. Following isoxaben treatment, the radial array of microtubules persists beneath the plasma membrane of nonswollen tips, while this array is specifically disrupted in swollen tips. Microtubules instead form a random network throughout the tip. Growth in these pollen tubes is turgor driven, but the morphological changes due to isoxaben are not just the result of weakened cell walls since pollen tubes grown in hypoosmotic media are not significantly shorter but do have swollen tips and tubes are wider along their entire length. We conclude that the radial microtubules in the tip do maintain tip integrity and that the specific inhibition of cellulose microfibril deposition leads to the disorganization of these microtubules. This supports the emerging model that there is bidirectional communication across the plasma membrane between cortical microtubules and cellulose microfibrils.

Benzamides↗

Experimental proof of contamination of blood components by (1-->3)-beta-D-glucan caused by filtration with cellulose filters in the manufacturing process.

The level of (1-->3)-beta-D-glucan in blood is a diagnostic index of fungal infection because it is released from the fungal cell wall. However, high levels of plasma (1-->3)-beta-D-glucan in patients administered blood components may give false positive results. High levels of (1-->3)-beta-D-glucan have been detected in blood components. We suspected that (1-->3)-beta-D-glucan from cellulose filters had been eluted into blood components by filtration in the manufacturing process. To investigate the contamination of blood components by (1-->3)-beta-D-glucan from cellulose filters, in vitro experiments were performed by using six cellulose filters and a nylon filter. Human serum albumin (HSA) solution (100 ml) was flowed through each filter after rinsing with 100 ml of distilled water, and (1-->3)-beta-D-glucan in each fraction was determined by Fungitec G test MK. The concentration of (1-->3)-beta-D-glucan eluted from cellulose filters in 100-ml distilled water fractions ranged from 6 to 207 pg/ml, and that of HSA fractions ranged from 33 to 20,784 pg/ml. These data showed that remarkably higher (1-->3)-beta-D-glucan levels were detected in HSA fractions flowed through cellulose filters in spite of advance rinsing with 100 ml of distilled water. In the case of a nylon filter, (1-->3)-beta-D-glucan was not eluted in either fraction. These results indicate that (1-->3)-beta-D-glucan contamination in blood components is caused by filtration with cellulose filters in the manufacturing process.

Blood Chemical Analysis↗

Cellulose granulomas and their relationship to intestinal obstruction.

Cellulose foreign body was initially described by the authors as a cause of granulomatous peritonitis implicating disposable surgical fabrics. The purpose of this study was to establish the incidence, origin, and clinical significance of the lesion. Of 7,500 surgical specimens and autopsies from surgical mortalities reviewed by one pathologist during a two and a half year study period, forty-five cases of cellulose foreign body granulomas were identified by light microscopy. They were examined with polarization technics and scanning electron microscopy in an attempt to determine the source of the cellulose fibers as either cotton or a wood product. The forty-five cases were identified in patients who had at least one previous surgical procedure involving the same area. Twenty-seven cases were extraperitoneal. Eighteen were located in the peritoneal cavity of which five were found at autopsy and thriteen were identified at laparotomy. Two patients had granulomatous peritonitis and six had mechanical small bowel obstruction associated with the granulomas. During the study period there were sixty operative patients of small bowel obstruction; forty-nine were due to adhesions of which thirty-seven had lysis of adhesions without biopsy. Of the twelve patients with surgical specimens, cellulose granulomas were present in six. This suggests that cellulose foreign body granuloma may be a significant cause of intestinal obstruction. The origin of the cellulose could not be definitively established in most cases because of loss of morphologic characteristics. However, fibers were positively identified as wood in two of ten cases (20 per cent) examined with scanning electron microscopy, which supports the thesis that they were derived from disposable surgical fabrics.

Cellulose↗

The 1,4-beta-D-glucan glucanohydrolases from Phanerochaete chrysosporium. Re-assessment of their significance in cellulose degradation mechanisms.

A physico-chemical, functional and structural characterization, including partial sequence data, of three major 1,4-beta-D-glucan glucanohydrolases (EC. 3.2.1.4) isolated from the culture filtrate of the white-rot fungus Phanerochaete chrysosporium, shows that all three enzymes belong to a single family of cellulases. EG44, pI 4.3, (named after its apparent molecular mass in kDa), shows a clear homology with Schizopyllum commune Endoglucanase I (EGI); whereas EG38, pI 4.9, (named in the same manner) is related more closely to Trichoderma reesei (Trichoderma longibrachiatum) Endoglucanase III (EGIII). EG36, pI 5.6-5.7, is probably an EG38 protein lacking its cellulose binding domain. Strong synergistic action is induced by the enzymes acting in concert with cellobiohydrolases (CBHI and CBHII) from the same organism, indicating a highly effective enzymatic system for cellulose degradation. Controlled proteolysis with papain has allowed a so far unique cleavage of endoglucanases EG44 and EG38 into two domains: a core protein, which virtually lacks the capacity to absorb onto microcrystal-line cellulose but retains full catalytic activity against carboxymethyl cellulose and low molecular weight soluble substrates; and a peptide fragment corresponding to the cellulose binding domain. The latter appears to be of paramount significance in the mechanisms involved in the hydrolysis of microcrystalline cellulose.

Amino Acid Sequence↗

Extraction of DNA-cellulose-bound glucocorticoid-receptor complexes with sodium tungstate.

Glucocorticoid-receptor complex from rat liver cytosol, activated by warming at 23 degrees C or fractionation with (NH4)2SO4, was adsorbed over DNA-cellulose. This DNA-cellulose-bound [3H]triamcinolone acetonide-receptor complex was extracted in a dose-dependent manner by incubation with different concentrations of sodium tungstate. A 50% recovery of receptor was achieved with 5 mM sodium tungstate. Almost the entire glucocorticoid-receptor complex bound to DNA-cellulose could be extracted with 20 mM sodium tungstate. The [3H]triamcinolone acetonide released from DNA-cellulose following tungstate and molybdate treatment was found to be associated with a macromolecule, as seen by analysis on a Sephadex G-75 column. The glucocorticoid-receptor complex extracted by both the compounds sedimented as a 4 S entity of 5-20% sucrose gradients under low- and high-salt conditions. Addition of tungstate or molybdate to the preparations containing activated receptor had no effect on the sedimentation rate of receptor. However, addition of tungstate to non-activated receptor preparation caused aggregates of larger size. The tungstate-extracted glucocorticoid-receptor complex failed to rebind to DNA-cellulose even after extensive dialysis, whereas receptor in molybdate-extract retained its DNA-cellulose binding capacity.

Animals↗

Establishment of cellulolytic bacteria in the digestive tract of conventionally reared young mice: effect of the dietary cellulose content in the adult.

Cellulolytic bacteria became established 12 days after birth in the caecum and colon of conventionally-reared mice fed a diet containing 5 p. 100 crude cellulose (Weende). Their population reached a level between 10(6) and 10(7) bacteria per gram of digestive contents in 25-day-old animals. However, variations between animals were very large; 20 to 50% of the individuals were free of cellulolytic bacteria. A low cellulolytic population was observed in adult mice fed a cellulose-free diet. The amount of cellulose in the diet and its nature (crude or pure cellulose) affected the number of cellulolytic bacteria: the higher the percentage of cellulose in the diet, the higher the number of cellulolytic bacteria, in particular with crude cellulose-containing diet.

Animals↗

Arabinan-cellulose composite in Opuntia ficus-indica prickly pear spines.

The ultrastructure of the spines decorating the cladodes of the cactus Opuntia ficus-indica was investigated by optical microscopy, scanning and transmission electron microscopy, wide angle X-ray, and solid state 13C NMR analyses. Each spine consisted of a compact parallel arrangement of slender cellulosic fibers (0.4 mm in length and 6-10 microm in diameter) with small lumens. The fibers were disencrusted by alkali and sodium chlorite bleaching, yielding a remarkable arabinan-cellulose (1:1) product. X-ray fiber diagrams of the spines before and after purification confirmed the presence of crystalline cellulose domains with molecular axis parallel to the spine axis. CP-MAS 13C T1 NMR data showed a strong interaction at a nanometric level of a fraction of the arabinan and the cellulose crystalline domains. By sequential hydrothermal extractions, followed by a trifluoroacetic acid treatment, a relatively pure cellulose was isolated while the extracted fibers became fibrillated into slender microfibrils having no more than 4-6 nm diameter. The hydrothermal extract yielded the alpha-L-arabinofuranan consisting of a chain of (1-->5)-linked L-arabinosyl residues with branching either at C-2 or C-3 or at both C-2 and C-3. Taken together, these observations suggest that the bulk of the spine fibers consists of an intimate composite of cellulose microfibrils embedded in an arabinan matrix.

Arabinose↗

Characteristics of degraded cellulose obtained from steam-exploded wheat straw.

The isolation of cellulose from wheat straw was studied using a two-stage process based on steam explosion pre-treatment followed by alkaline peroxide post-treatment. Straw was steamed at 200 degrees C, 15 bar for 10 and 33 min, and 220 degrees C, 22 bar for 3, 5 and 8 min with a solid to liquid ratio of 2:1 (w/w) and 220 degrees C, 22 bar for 5 min with a solid to liquid ratio of 10:1, respectively. The steamed straw was washed with hot water to yield a solution rich in hemicelluloses-derived mono- and oligosaccharides and gave 61.3%, 60.2%, 66.2%, 63.1%, 60.3% and 61.3% of the straw residue, respectively. The washed fibre was delignified and bleached by 2% H2O2 at 50 degrees C for 5 h under pH 11.5, which yielded 34.9%, 32.6%, 40.0%, 36.9%, 30.9% and 36.1% (% dry wheat straw) of the cellulose preparation, respectively. The optimum cellulose yield (40.0%) was obtained when the steam explosion pre-treatment was performed at 220 degrees C, 22 bar for 3 min with a solid to liquid ratio of 2:1, in which the cellulose fraction obtained had a viscosity average degree of polymerisation of 587 and contained 14.6% hemicelluloses and 1.2% klason lignin. The steam explosion pre-treatment led to a significant loss in hemicelluloses and alkaline peroxide post-treatment resulted in substantial dissolution of lignin and an increase in cellulose crystallinity. The six isolated cellulose samples were further characterised by FT-IR and 13C-CP/MAS NMR spectroscopy and thermal analysis.

Cellulose↗

Comparative evaluation of size-exclusion chromatography and viscometry for the characterisation of cellulose.

The analysis using size-exclusion chromatography (SEC) with multi-angle light scattering (MALS) and differential refractive index (DRI) detection of cellulose dissolved in lithium chloride/N,N-dimethylacetamide (LiCI/DMAc) is evaluated and compared to two other methods currently used for cellulose analysis. These are SEC with low-angle light scattering (LALS) and ultra-violet detection of cellulose derivatised to tricarbanilates (CTC), and viscometry in cadmium triethylene diamine dihydroxide (cadoxen). The cellulose source is Whatman No. 1 paper, unaged or artificially aged with a combination of heat and humidity. The values of the molar mass (Mr) averages of cellulose obtained with the different methods resulted quite different for both aged and unaged paper. SEC of cellulose in LiCl/DMAc provided the highest Mr averages values, followed by SEC of CTC, while viscometry yielded the lowest values. These differences were more or less pronounced depending on the initial degradation state of the paper. Several hypotheses are presented in order to explain these discrepancies and each method is discussed on the basis of its suitability to characterise the aging-induced degradation.

Cellulose↗

Sorption of nicotine to cellulose powders.

The purpose of this study was to investigate the influence of the crystallinity, surface area, and pore volume of cellulose powders on the loading, release, and stability of nicotine. Four different types of cellulose powders with varying crystallinity index, surface area, and pore volume were produced and characterized. The powders were loaded with nicotine by rotary evaporation from an ethanol solution and by adsorption from nicotine-saturated air. The release of nicotine from loaded cellulose powders into both a passing airstream and water was investigated by UV spectroscopy. A 3-month stability study was conducted and the total sum of nicotine oxidation products was measured. Nicotine loading and release were independent of cellulose powder crystallinity, whereas it was possible to load more nicotine on the cellulose powder with a large surface area and pore volume. Release into water was very rapid and almost complete for all samples. Nicotine was most stable when loaded on the powder with a large surface area and pore volume. Highly porous cellulose matrices could be useful for stabilization and handling of both nicotine and other liquid active pharmaceutical ingredients.

Adsorption↗

Enzymatic degradation of model cellulose films.

Enzymatic degradation of model cellulose films prepared by a spin-coating technique was investigated by ellipsometry. The cellulose films were prior to degradation characterized by ellipsometry, contact angle measurements, ESCA (electron spectroscopy for chemical analysis) and AFM (atomic force microscopy). At enzyme addition to preformed cellulose films an initial adsorption was observed, which was followed by a total interfacial mass decrease due to enzymatic degradation of the cellulose films. The degradation rate was found to be constant during an extended time of hours, whereafter the degradation leveled off. In parallel to the decreased interfacial mass, the cellulose degradation resulted in a thinner and more dilute interfacial film. At long degradation times, however, there was an expansion of the cellulose film. The enzyme concentration affected the degradation rate significantly, with a faster degradation at a higher enzyme concentration. The effects of pH, temperature, ionic strength and stirring rate in the cuvette were also investigated.

Adsorption↗

The cellulose/lignin assembly assessed by molecular modeling. Part 2: Seeking for evidence of organization of lignin molecules at the interface with cellulose.

We have extended our previous computational investigation of the cellulose lignin assembly by considering more complex systems. Surface coverage of cellulose, structural parameters such as molecular mass and structural features of the lignin models and the presence of an explicit hydrated environment have been taken into account to examine their influence on the associative interactions between cellulose and lignin. To this end, different lignin molecular models, from beta-O-4 dimers up to a 20-units oligomer, were considered. Independently of the system studied, the key feature of the adsorption is globally preserved: aromatic rings of lignin adopt a preferential parallel orientation relative to the cellulose surface. Such structural order appears to be limited to the first shell of lignin units adsorbed on the cellulose. The pre-organization of the lignin monolayer at the surface of cellulose is not significantly changed at the interface with water. However, adsorption significantly depends on the molecular mass and the structure of lignin. The structural order is significantly hindered by the presence of branching or some particular inter-units linkages in the structure of lignin. Such results rationalize the apparent contradiction between the available experimental results.

Cell Wall↗

Molecular interactions in bacterial cellulose composites studied by 1D FT-IR and dynamic 2D FT-IR spectroscopy.

Specific strain-induced orientation and interactions in three Acetobacter cellulose composites: cellulose (C), cellulose/pectin (CP) and cellulose/xyloglucan (CXG) were characterized by FT-IR and dynamic 2D FT-IR spectroscopies. On the molecular level, the reorientation of the cellulose fibrils occurred in the direction of the applied mechanical strain. The cellulose-network reorientation depends on the composition of the matrix, including the water content, which lubricates the motion of macromolecules in the network. At the submolecular level, dynamic 2D FT-IR data suggested that there was no interaction between cellulose and pectin in CP and that they responded independently to a small amplitude strain, while in CXG, cellulose and xyloglucan were uniformly strained along the sample length.

Acetobacter↗

Sucrose synthase localizes to cellulose synthesis sites in tracheary elements.

The synthesis of crystalline cellulose microfibrils in plants is a highly coordinated process that occurs at the interface of the cortex, plasma membrane, and cell wall. There is evidence that cellulose biogenesis is facilitated by the interaction of several proteins, but the details are just beginning to be understood. In particular, sucrose synthase, microtubules, and actin have been proposed to possibly associate with cellulose synthases (microfibril terminal complexes) in the plasma membrane. Differentiating tracheary elements of Zinnia elegans L. were used as a model system to determine the localization of sucrose synthase and actin in relation to the plasma membrane and its underlying microtubules during the deposition of patterned, cellulose-rich secondary walls. Cortical actin occurs with similar density both between and under secondary wall thickenings. In contrast, sucrose synthase is highly enriched near the plasma membrane and the microtubules under the secondary wall thickenings. Both actin and sucrose synthase lie closer to the plasma membrane than the microtubules. These results show that the preferential localization of sucrose synthase at sites of high-rate cellulose synthesis can be generalized beyond cotton fibers, and they establish a spatial context for further work on a multi-protein complex that may facilitate secondary wall cellulose synthesis.

Actins↗

Iodine-containing cellulose mixed esters as radiopaque polymers for direct embolization of cerebral aneurysms and arteriovenous malformations.

The present study deals with the synthesis and characterization of radiopaque polymers which could, when solubilized in an appropriate water-miscible solvent, be useful embolic materials for the treatment of cerebral aneurysms and arteriovenous malformations. For this purpose cellulose (both microcrystalline and powdered) and partially substituted cellulose acetate (two different viscosity grades) were selected as starting materials to prepare iodine-containing polymers through various synthetic routes. The materials obtained were characterized by IR and NMR spectroscopy, molecular weight, iodine content, radiopacity and solubility in selected injectable organic solvents. The embolic liquids were evaluated for their precipitation behavior in a phosphate buffer solution (pH 7.4) mimicking physiological conditions using an in vitro aneurysm model. A sheep model was also used to assess in vivo the radiopacity and precipitation properties of a highly concentrated solution of a cellulose acetate 2,3,4-triiodobenzoate mixed ester. All materials with 4-iodo- and 2,3,5-triiodobenzoyl groups gave sufficient radiopacity to be regarded as possible embolization materials, whereas iododeoxycellulose and iododeoxycellulose acetate were not radiopaque because of their low iodine content. Esters synthesized using cellulose as starting material were not soluble in the selected organic solvents due to the presence of many residual hydroxyl groups, but could be used for other biomedical applications where insoluble radiopaque materials are used. In contrast, solubility of the materials as well as satisfactory precipitation properties were ensured using cellulose acetate as the starting material. In conclusion, cellulose acetate iodobenzoate mixed esters dissolved in diglyme or dimethyl isosorbide (dimethyl sulfoxide is probably less appropriate because of its toxicity and hemolytic properties) could be useful embolic liquids for the treatment of cerebral aneurysms or arteriovenous malformations.

Angiography, Digital Subtraction↗