Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Biofilms”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28Linked to original sources
PubMed2006

Effect of material characteristics and/or surface topography on biofilm development.

BACKGROUND: From an ecological viewpoint, the oral cavity, in fact the oro-pharynx, is an 'open growth system'. It undergoes an uninterrupted introduction and removal of both microorganisms and nutrients. In order to survive within the oro-pharyngeal area, bacteria need to adhere either to the soft or hard tissues in order to resist shear forces. The fast turn-over of the oral lining epithelia (shedding 3 x/day) is an efficient defence mechanism as it prevents the accumulation of large masses of microorganisms. Teeth, dentures, or endosseous implants, however, providing non-shedding surfaces, allow the formation of thick biofilms. In general, the established biofilm maintains an equilibrium with the host. An uncontrolled accumulation and/or metabolism of bacteria on the hard surfaces forms, however, the primary cause of dental caries, gingivitis, periodontitis, peri-implantitis, and stomatitis. OBJECTIVES: This systematic review aimed to evaluate critically the impact of surface characteristics (free energy, roughness, chemistry) on the de novo biofilm formation, especially in the supragingival and to a lesser extent in the subgingival areas. METHODS: An electronic Medline search (from 1966 until July 2005) was conducted applying the following search items: 'biofilm formation and dental/oral implants/surface characteristics', 'surface characteristics and implants', 'biofilm formation and oral', 'plaque/biofilm and roughness', 'plaque/biofilm and surface free energy', and 'plaque formation and implants'. Only clinical studies within the oro-pharyngeal area were included. RESULTS: From a series of split-mouth studies, it could be concluded that both an increase in surface roughness above the R(a) threshold of 0.2 microm and/or of the surface-free energy facilitates biofilm formation on restorative materials. When both surface characteristics interact with each other, surface roughness was found to be predominant. The biofilm formation is also influenced by the type (chemical composition) of biomaterial or the type of coating. Direct comparisons in biofilm formation on different transmucosal implant surfaces are scars. CONCLUSIONS: Extrapolation of data from studies on different restorative materials seems to indicate that transmucosal implant surfaces with a higher surface roughness/surface free energy facilitate biofilm formation.

Bacterial Adhesion↗
PubMed2006

Photosensitization of in vitro biofilms by toluidine blue O combined with a light-emitting diode.

In natural ecosystems, micro-organisms grow preferentially attached to surfaces, forming matrix-enclosed biofilms. The aim of this study was to determine photodestruction levels in biofilms after subjecting them to photodynamic therapy. Biofilms of Streptococcus mutans, S. sobrinus, and S. sanguinis were grown on enamel slabs for 3, 5 or 7 d. Both the number of viable micro-organisms and the concentration of water-insoluble polysaccharides were analysed, and mineral loss (DeltaZ) analyses were performed on the enamel slabs. The antimicrobial potential of toluidine blue O (0.1 mg ml(-1)), associated with 85.7 J cm(-2) of a light-emission diode, was evaluated on the viability of 5-d biofilms. Both the number of micro-organisms and the concentration of water-insoluble polysaccharide increased with the age of the biofilms. A significant reduction ( approximately 95%) in viability was observed for S. mutans and S. sobrinus biofilms following photosensitization, with a > 99.9% reduction in the viability of S. sanguinis biofilms. In conclusion, a biofilm model was shown to be suitable for studying changes in bacterial numbers and enamel mineralization and for demonstrating the potential value of photosensitization in the control of in vitro biofilms.

Analysis of Variance↗
PubMed2002

In vitro activity of caspofungin against Candida albicans biofilms.

Most manifestations of candidiasis are associated with biofilm formation on biological or inanimate surfaces. Candida albicans biofilms are recalcitrant to treatment with conventional antifungal therapies. Here we report on the activity of caspofungin, a new semisynthetic echinocandin, against C. albicans biofilms. Caspofungin displayed potent in vitro activity against sessile C. albicans cells within biofilms, with MICs at which 50% of the sessile cells were inhibited well within the drug's therapeutic range. Scanning electron microscopy and confocal scanning laser microscopy were used to visualize the effects of caspofungin on preformed C. albicans biofilms, and the results indicated that caspofungin affected the cellular morphology and the metabolic status of cells within the biofilms. The coating of biomaterials with caspofungin had an inhibitory effect on subsequent biofilm development by C. albicans. Together these findings indicate that caspofungin displays potent activity against C. albicans biofilms in vitro and merits further investigation for the treatment of biofilm-associated infections.

Anti-Bacterial Agents↗
PubMed2002

Interactions between biocide cationic agents and bacterial biofilms.

The resistance of bacterial biofilms to physical and chemical agents is attributed in the literature to various interconnected processes. The limitation of mass transfer alters the growth rate, and physiological changes in the bacteria in the film also appear. The present work describes an approach to determination of the mechanisms involved in the resistance of bacteria to quaternary ammonium compounds (benzalkonium chloride) according to the C-chain lengths of those compounds. For Pseudomonas aeruginosa CIP A 22, the level of resistance of the bacteria in the biofilm relative to that of planktonic bacteria increased with the C-chain length. For cells within the biofilm, the exopolysaccharide induced a characteristic increase in surface hydrophilicity. However, this hydrophilicity was eliminated by simple resuspension and washing. The sensitivity to quaternary ammonium compounds was restored to over 90%. Staphylococcus aureus CIP 53 154 had a very high level of resistance when it was in the biofilm form. A characteristic of bacteria from the biofilm was a reduction in the percent hydrophobicity, but the essential point is that this hydrophobicity was retained after the biofilm bacteria were resuspended and washed. The recovery of sensitivity was thus only partial. These results indicate that the factors involved in biofilm resistance to quaternary ammonium compounds vary according to the bacterial modifications induced by the formation of a biofilm. In the case of P. aeruginosa, we have underlined the involvement of the exopolysaccharide and particularly the three-dimensional structure (water channels). In the case of S. aureus, the role of the three-dimensional structure is limited and drastic physiological changes in the biofilm cells are more highly implicated in resistance.

Animals↗
PubMed2005

Use of confocal microscopy to analyze the rate of vancomycin penetration through Staphylococcus aureus biofilms.

When bacteria assume the biofilm mode of growth, they can tolerate levels of antimicrobial agents 10 to 1,000 times higher than the MICs of genetically equivalent planktonic bacteria. The properties of biofilms that give rise to antibiotic resistance are only partially understood. Inhibition of antibiotic penetration into the biofilm may play a role, but this has not been proven directly. In this report, penetration of the glycopeptide antibiotic vancomycin into viable Staphylococcus aureus biofilms was analyzed by confocal scanning laser microscopy using a fluorescently labeled derivative of the drug. We found that while vancomycin bound to free-floating bacteria in water within 5 min, it took more than 1 h to bind to cells within the deepest layers of a biofilm. These results indicate that the antibiotic is transported through the depth of the biofilm but that the rate is significantly reduced with respect to its transport through flowing water. This suggests that, whereas planktonic bacteria were rapidly exposed to a full bolus of vancomycin, the bacteria in the deeper layers of the biofilm were exposed to a gradually increasing dose of the drug due to its reduced rate of penetration. This gradual exposure may allow the biofilm bacteria to undergo stress-induced metabolic or transcriptional changes that increase resistance to the antibiotic. We also investigated the role of poly-N-acetylglucosamine, an important component of the S. aureus biofilm matrix, and found that its production was not involved in the observed decrease in the rate of vancomycin penetration.

Anti-Bacterial Agents↗
PubMed2005

Microplate Alamar blue assay for Staphylococcus epidermidis biofilm susceptibility testing.

Biofilms are at the root of many infections largely because they are much more antibiotic resistant than their planktonic counterparts. Antibiotics that target the biofilm phenotype are desperately needed, but there is still no standard method to assess biofilm drug susceptibility. Staphylococcus epidermidis ATCC 35984 biofilms treated with eight different approved antibiotics and five different experimental compounds were exposed to the oxidation reduction indicator Alamar blue for 60 min, and reduction relative to untreated controls was determined visually and spectrophotometrically. The minimum biofilm inhibitory concentration was defined as < or = 50% reduction and a purplish well 60 min after the addition of Alamar blue. All of the approved antibiotics had biofilm MICs (MBICs) of >512 microg/ml (most >4,096 microg/ml), and four of the experimental compounds had MBICs of < or = 128 microg/ml. The experimental aaptamine derivative hystatin 3 was used to correlate Alamar blue reduction with 2,3-bis(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide (XTT) reduction and viable counts (CFU/ml) for S. epidermidis ATCC 35984, ATCC 12228, and two clinical isolates. For all four strains, Alamar blue results correlated well with XTT (r = 0.83 to 0.97) and with CFU/ml results (r = 0.85 to 0.94). Alamar blue's stability and lack of toxicity allowed CFU/ml to be determined from the same wells as Alamar blue absorbances. If the described method of microplate Alamar blue biofilm susceptibility testing, which is simple, reproducible, cost-effective, nontoxic, and amenable to high throughput, is applicable to other important biofilm forming species, it should greatly facilitate the discovery of biofilm specific agents.

Anti-Bacterial Agents↗
PubMed2006

Capture and retention of Cryptosporidium parvum oocysts by Pseudomonas aeruginosa biofilms.

The association of Cryptosporidium oocysts with biofilm communities can influence the propagation of this pathogen through both environmental systems and water treatment systems. We observed the capture and retention of C. parvum oocysts in Pseudomonas aeruginosa biofilms using laboratory flow cells. Biofilms were developed in two different growth media using two different strains of P. aeruginosa, a wild-type strain (PAO1) and a strain that overproduces the exopolysaccharide alginate (PDO300). Confocal laser-scanning microscopy was used in conjunction with image analysis to assess the structure of the biofilms prior to introducing oocysts into the flow cells. More oocysts were captured by the biofilm-coated surfaces than the abiotic glass surface in both media. There was no significant difference in capture across the two strains of P. aeruginosa biofilm, but the fraction of oocysts captured was positively related to biofilm roughness and surface-area-to-volume ratio. Once captured, oocysts were retained in the biofilm for more than 24 h and were not released after a 40-fold increase in the system flow rate. We believe the capture and retention of oocysts by biofilm communities can impact the environmental transmission of C. parvum, and this interaction should be taken into consideration when predicting the migration of pathogens in the environment.

Animals↗
PubMed2007

Air-liquid interface biofilms of Bacillus cereus: formation, sporulation, and dispersion.

Biofilm formation by Bacillus cereus was assessed using 56 strains of B. cereus, including the two sequenced strains, ATCC 14579 and ATCC 10987. Biofilm production in microtiter plates was found to be strongly dependent on incubation time, temperature, and medium, as well as the strain used, with some strains showing biofilm formation within 24 h and subsequent dispersion within the next 24 h. A selection of strains was used for quantitative analysis of biofilm formation on stainless steel coupons. Thick biofilms of B. cereus developed at the air-liquid interface, while the amount of biofilm formed was much lower in submerged systems. This suggests that B. cereus biofilms may develop particularly in industrial storage and piping systems that are partly filled during operation or where residual liquid has remained after a production cycle. Moreover, depending on the strain and culture conditions, spores constituted up to 90% of the total biofilm counts. This indicates that B. cereus biofilms can act as a nidus for spore formation and subsequently can release their spores into food production environments.

Air Microbiology↗
PubMed1994

Direct measurement of chlorine penetration into biofilms during disinfection.

Transient chlorine concentration profiles were measured in biofilms during disinfection by use of a microelectrode developed for this investigation. The electrode had a tip diameter of ca. 10 microm and was sensitive to chlorine in the micromolar range. The biofilms contained Pseudomonas aeruginosa and Klebsiella pneumoniae. Chlorine concentrations measured in biofilms were typically only 20% or less of the concentration in the bulk liquid. Complete equilibration with the bulk liquid did not occur during the incubation time of 1 to 2 h. The penetration depth of chlorine into the biofilm and rate of penetration varied depending on the measurement location, reflecting heterogeneity in the distribution of biomass and in local hydrodynamics. The shape of the chlorine profiles, the long equilibration times, and the dependence on the bulk chlorine concentration showed that the penetration was a function of simultaneous reaction and diffusion of chlorine in the biofilm matrix. Frozen cross sections of biofilms, stained with a redox dye and a DNA stain, showed that the area of chlorine penetration overlapped with nonrespiring zones near the biofilm-bulk fluid interface. These data indicate that the limited penetration of chlorine into the biofilm matrix is likely to be an important factor influencing the reduced efficacy of this biocide against biofilms as compared with its action against planktonic cells.

Biofilms↗
PubMed1995

Activity of synchronized cells of a steady-state biofilm recirculated reactor during xenobiotic biodegradation.

The maintenance of a steady-state biofilm in a continuous-flow fixed-bed reactor, as a consequence of the reproduction-detachment of cells (an interfacial cell physiology phenomenon of steady-state biofilm) during the biodegradation of 2,4,6-trichlorophenol by Pseudomonas cells, was determined. After cell adhesion on an open-pore glass support, the biofilm was formed in a packed-bed recirculated reactor. After the steady-state biofilm was reached, the mechanisms of the interfacial cell detachment (at the biofilm-liquid interface) were determined. It was established that (i) the hydrophobicity of immobilized sessile cells (parent cells) increased (from 50 to 80%) as the dilution rate increased, while the hydrophobicity of detached suspended cells (daughter cells) remained constant (about 45%); and (ii) the immediately detached suspended cells showed a synchronized growth in about three generations. These results indicate that (i) the immobilized sessile and suspended detached cells grew synchronically at the end and at the beginning of the cell cycle, respectively; and (ii) the hydrophobicity difference of immobilized sessile and suspended detached cells permitted the cells detachment. Therefore, it is probable that independent of shear stress (due to recirculated flow), the synchronized growth and hydrophobicity of cells (which vary during the cell cycle) are the main factors permitting the maintenance of a steady-state xenobiotic-degrading biofilm reactor (in which the overall accumulation of biofilm is determined by the average growth rate of the biofilm cells minus the rate of detachment of cells from the biofilm).

Bacterial Adhesion↗
PubMed1995

Nonuniform spatial patterns of respiratory activity within biofilms during disinfection.

Fluorescent stains in conjunction with cryoembedding and image analysis were applied to demonstrate spatial gradients in respiratory activity within bacterial biofilms during disinfection with monochloramine. Biofilms of Klebsiella pneumoniae and Pseudomonas aeruginosa grown together on stainless steel surfaces in continuous-flow annular reactors were treated with 2 mg of monochloramine per liter (influent concentration) for 2 h. Relatively little biofilm removal occurred as evidenced by total cell direct counts. Plate counts (of both species summed) indicated an average 1.3-log decrease after exposure to 2 mg of monochloramine per liter. The fluorogenic redox indicator 5-cyano-2,3-ditolyl tetrazolium chloride (CTC) and the DNA stain 4',6-diamidino-2-phenylindole (DAPI) were used to differentiate respiring and nonrespiring cells in biofilms. Epifluorescence micrographs of frozen biofilm cross sections clearly revealed gradients of respiratory activity within biofilms in response to monochloramine treatment. These gradients in specific respiratory activity were quantified by calculating the ratio of CTC and DAPI intensities measured by image analysis. Cells near the biofilm-bulk fluid interface lost respiratory activity first. After 2 h of biocide treatment, greater respiratory activity persisted deep in the biofilm than near the biofilm-bulk fluid interface.

Biofilms↗
PubMed1998

Genetic diversity of the biofilm covering Montacuta ferruginosa (Mollusca, bivalvia) as evaluated by denaturing gradient gel electrophoresis analysis and cloning of PCR-amplified gene fragments coding for 16S rRNA.

The shell of the bivalve Montacuta ferruginosa, a symbiont living in the burrow of an echinoid, is covered with a rust-colored biofilm. This biofilm includes different morphotypes of bacteria that are encrusted with a mineral rich in ferric ion and phosphate. The aim of this research was to determine the genetic diversity and phylogenetic affiliation of the biofilm bacteria. Also, the possible roles of the microorganisms in the processes of mineral deposition within the biofilm, as well as their impact on the biology of the bivalve, were assessed by phenotypic inference. The genetic diversity was determined by denaturing gradient gel electrophoresis (DGGE) analysis of short (193-bp) 16S ribosomal DNA PCR products obtained with primers specific for the domain Bacteria. This analysis revealed a diverse consortium; 11 to 25 sequence types were detected depending on the method of DNA extraction used. Individual biofilms analyzed by using the same DNA extraction protocol did not produce identical DGGE profiles. However, different biofilms shared common bands, suggesting that similar bacteria can be found in different biofilms. The phylogenetic affiliations of the sequence types were determined by cloning and sequencing the 16S rRNA genes. Close relatives of the genera Pseudoalteromonas, Colwellia, and Oceanospirillum (members of the gamma-Proteobacteria lineage), as well as Flexibacter maritimus (a member of the Cytophaga-Flavobacter-Bacteroides lineage), were found in the biofilms. We inferred from the results that some of the biofilm bacteria could play a role in the mineral formation processes.

Animals↗
PubMed2001

Quorum-sensing genes in Pseudomonas aeruginosa biofilms: their role and expression patterns.

Acylated homoserine lactone molecules are used by a number of gram-negative bacteria to regulate cell density-dependent gene expression by a mechanism known as quorum sensing (QS). In Pseudomonas aeruginosa, QS or cell-to-cell signaling controls expression of a number of virulence factors, as well as biofilm differentiation. In this study, we investigated the role played by the las and rhl QS systems during the early stages of static biofilm formation when cells are adhering to a surface and forming microcolonies. These studies revealed a marked difference in biofilm formation between the PAO1 parent and the QS mutants when glucose, but not citrate, was used as the sole carbon source. To further elucidate the contribution of lasI and rhlI to biofilm maturation, we utilized fusions to unstable green fluorescent protein in concert with confocal microscopy to perform real-time temporal and spatial studies of these genes in a flowing environment. During the course of 8-day biofilm development, lasI expression was found to progressively decrease over time. Conversely, rhlI expression remained steady throughout biofilm development but occurred in a lower percentage of cells. Spatial analysis revealed that lasI and rhlI were maximally expressed in cells located at the substratum and that expression decreased with increasing biofilm height. Because QS was shown previously to be involved in biofilm differentiation, these findings have important implications for the design of biofilm prevention and eradication strategies.

Bacterial Proteins↗
PubMed2001

Interception of small particles by flocculent structures, sessile ciliates, and the basic layer of a wastewater biofilm.

We investigated attachment processes of hydrophobic and hydrophilic particles (diameter = 1 microm) to mature biofilms grown on clay marbles in a sequencing batch biofilm reactor. During a treatment cycle with filtered wastewater containing different fluorescent beads, the progression of particle density in various biofilm compartments (carrier biofilm, basic biofilm layer, biofilm flocs, and sessile ciliates) was determined by flow cytometry, confocal laser scanning microscopy and automated image analysis. Particles were almost completely removed from wastewater by typical processes of particle retention: up to 58% of particles attached to clay marbles, up to 15% were associated with suspended flocs, and up to 10% were ingested by sessile ciliates. Ingestion of particles by ciliates was exceptionally high immediately after wastewater addition (1,200 particles grazer(-1) x h(-1)) and continued until approximately 14% of the water had been cleared by ciliate filter feeding. Most probably, ciliate bioturbation increases particle sorption to the basic biofilm. Backwashing of the reactor detached pieces of biofilm and thus released approximately 50% of the particles into rinsing water. Clay marbles in the upper part of the reactor were more efficiently abraded than in the lower part. No indications for selective attachment of the applied hydrophobic and hydrophilic beads were found. As a consequence of interception patterns, organisms at elevated biofilm structures are probably major profiteers of wastewater particles; among them, ciliates may be of major importance because of their highly active digestive food vacuoles.

Animals↗
PubMed2002

Microtiter plate assay for assessment of Listeria monocytogenes biofilm formation.

Listeria monocytogenes has the ability to form biofilms on food-processing surfaces, potentially leading to food product contamination. The objective of this research was to standardize a polyvinyl chloride (PVC) microtiter plate assay to compare the ability of L. monocytogenes strains to form biofilms. A total of 31 coded L. monocytogenes strains were grown in defined medium (modified Welshimer's broth) at 32 degrees C for 20 and 40 h in PVC microtiter plate wells. Biofilm formation was indirectly assessed by staining with 1% crystal violet and measuring crystal violet absorbance, using destaining solution. Cellular growth rates and final cell densities did not correlate with biofilm formation, indicating that differences in biofilm formation under the same environmental conditions were not due to growth rate differences. The mean biofilm production of lineage I strains was significantly greater than that observed for lineage II and lineage III strains. The results from the standardized microtiter plate biofilm assay were also compared to biofilm formation on PVC and stainless steel as assayed by quantitative epifluorescence microscopy. Results showed similar trends for the microscopic and microtiter plate assays, indicating that the PVC microtiter plate assay can be used as a rapid, simple method to screen for differences in biofilm production between strains or growth conditions prior to performing labor-intensive microscopic analyses.

Bacterial Adhesion↗
PubMed2002

Development of a standard test to assess the resistance of Staphylococcus aureus biofilm cells to disinfectants.

A standardized disinfectant test for Staphylococcus aureus cells in biofilms was developed. Two disinfectants, the membrane-active compound benzalkonium chloride (BAC) and the oxidizing agent sodium hypochlorite, were used to evaluate the biofilm test. S. aureus formed biofilms on glass, stainless steel, and polystyrene in a simple system with constant nutrient flow that mimicked as closely as possible the conditions used in the current standard European disinfectant test (EN 1040). The biofilm that was formed on glass contained cell clumps and extracellular polysaccharides. The average surface coverage was 60%, and most (92%) of the biofilm cells were viable. Biofilm formation and biofilm disinfection in different experiments were reproducible. For biofilms exposed to BAC and hypochlorite the concentrations needed to achieve 4-log killing were 50 and 600 times higher, respectively, than the concentrations needed to achieve this level of killing with the European phase 1 suspension test cells. Our results show that a standardized disinfectant test for biofilm cells is a useful addition to the current standard tests.

Anti-Infective Agents, Local↗
PubMed2003

Heavy metal resistance of biofilm and planktonic Pseudomonas aeruginosa.

A study was undertaken to examine the effects of the heavy metals copper, lead, and zinc on biofilm and planktonic Pseudomonas aeruginosa. A rotating-disk biofilm reactor was used to generate biofilm and free-swimming cultures to test their relative levels of resistance to heavy metals. It was determined that biofilms were anywhere from 2 to 600 times more resistant to heavy metal stress than free-swimming cells. When planktonic cells at different stages of growth were examined, it was found that logarithmically growing cells were more resistant to copper and lead stress than stationary-phase cells. However, biofilms were observed to be more resistant to heavy metals than either stationary-phase or logarithmically growing planktonic cells. Microscopy was used to evaluate the effect of copper stress on a mature P. aeruginosa biofilm. The exterior of the biofilm was preferentially killed after exposure to elevated concentrations of copper, and the majority of living cells were near the substratum. A potential explanation for this is that the extracellular polymeric substances that encase a biofilm may be responsible for protecting cells from heavy metal stress by binding the heavy metals and retarding their diffusion within the biofilm.

Animals↗
PubMed2003

Environmental determinants of Vibrio cholerae biofilm development.

Vibrio cholerae is a versatile bacterium that flourishes in diverse environments, including the human intestine, rivers, lakes, estuaries, and the ocean. Surface attachment is believed to be essential for colonization of all of these natural environments. Previous studies have demonstrated that the vps genes, which encode proteins required for exopolysaccharide synthesis and transport, are required for V. cholerae biofilm development in Luria-Bertani broth. In this work, we showed that V. cholerae forms vps-dependent biofilms and vps-independent biofilms. The vps-dependent and -independent biofilms differ in their environmental activators and in architecture. Our results suggest that environmental activators of vps-dependent biofilm development are present in freshwater, while environmental activators of vps-independent biofilm development are present in seawater. The distinct environmental requirements for the two modes of biofilm development suggest that vps-dependent biofilm development and vps-independent biofilm development may play distinct roles in the natural environment.

Biofilms↗