Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Acetophenones”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28Linked to original sources

Solid-phase directed ortho-lithiation and the preparation of a phthalide library.

An efficient solid-phase synthesis of phthalides is described in which aromatic carboxylic acids or acid chlorides and ketones are used as building blocks. The carboxylic acid or acid chloride is tethered to aminomethylated polystyrene resin, forming a secondary amide, which functions as both the linker and the directing metalation group. This allows the resin-bound benzamides to be ortho-lithiated at 0 degrees C. The ortho-lithiated species can be quenched with benzaldehydes, benzophenones, and even acetophenones, affording resin-bound alcohols. A cyclative cleavage is induced by simply warming the resin in toluene or dioxane, yielding the desired phthalide compounds in exceptionally high purity.

Journal Article↗

Speciated ambient carbonyls in Rio de Janeiro, Brazil.

Carbonyls in urban air continue to receive scientific and regulatory attention as toxic air contaminants and for their important role in photochemical smog. However, few data are available for speciated carbonyls in urban air. Ambient concentrations of up to 61 carbonyls have been measured in Rio de Janeiro, Brazil. The most abundant carbonyls were formaldehyde and acetaldehyde (study-averaged concentrations of 10.8 +/- 4.1 and 10.4 +/- 4.6 microg m(-3), respectively, in samples of 3-h duration collected from May to November 2000 at a downtown location during the morning vehicle commute) followed by acetone, 2-butanone, and benzaldehyde. Ambient concentrations of other carbonyls (except acetophenone) correlated well with those of acetaldehyde and of formaldehyde. This study examines the ambient acetaldehyde/ambient formaldehyde concentration ratio in Brazilian cities since the mid-1980s in the context of changes in Brazil's reliance on ethanol as a vehicle fuel. This ratio has begun to decrease in recent years due to fleet turnover and is likely to decrease further as older cars fueled with ethanol are replaced by lower-emitting models that run on a gasoline-ethanol blend. The carbonyls measured are ranked with respect to ozone formation potential (using MIR coefficients) and reaction with OH (using carbonyl-OH reaction rate constants). Ozone formation is dominated by formaldehyde (43% of total) followed by acetaldehyde (32%) and methylglyoxal (8%); other carbonyls each contributed < or = 4% of total. For reaction with OH, acetaldehyde ranks first closely followed by formaldehyde.

Air Pollutants↗

Relationship between strength of organic sorbate interactions in NOM and hydration effect on sorption.

According to a recent conceptual model for hydration-assisted sorption of organic compounds in natural organic matter (NOM), certain polar moieties of dry NOM are unavailable for compound sorption due to strong intra- and intermolecular NOM interactions. Water molecules solvate these moieties creating new sorption sites at solvated contacts. It is expected that the greater a compound's ability to undergo specific interactions with NOM, the greater will be the hydration-assisted sorption effect, because penetration of compounds into solvated contacts must involve competition with water at the solvated contact. To test this model, we compare the hydration effect on sorption kinetics and equilibrium for 4 compounds with differing abilities to undergo specific interactions with NOM. Sorption measured on Pahokee peat in aqueous systems was fast compared with n-hexadecane (dry) systems. No concentration effect on attainment of sorption equilibrium was observed. m-Nitrophenol exhibited the greatest hydration-assisted sorption effect, benzyl alcohol showed an intermediate effect and acetophenone and nitrobenzene showed no hydration-assisted sorption, on an activity scale. The extent of hydration-assisted sorption effect correlates with compound ability to undergo specific interactions. These results support the conceptual model and demonstrate the importance of polar NOM noncovalent links in organizing the NOM phase and in controlling the hydration effect on sorption of organic compounds.

Adsorption↗

Combined application of stable carbon isotope analysis and specific metabolites determination for assessing in situ degradation of aromatic hydrocarbons in a tar oil-contaminated aquifer.

To evaluate the intrinsic bioremediation potential in an anoxic tar oil-contaminated aquifer at a former gasworks site, groundwater samples were qualitatively and quantitatively analyzed by compound-specific isotope analysis (CSIA) and signature metabolites analysis (SMA). 13C/12C fractionation data revealed conclusive evidence for in situ biodegradation of benzene, toluene, o-xylene, m/p-xylene, naphthalene, and 1-methylnaphthalene. In laboratory growth studies, 13C/12C isotope enrichment factors for anaerobic degradation of naphthalene (epsilon = -1.1 +/- 0.4) and 2-methylnaphthalene (epsilon = -0.9 +/- 0.1) were determined with the sulfate-reducing enrichment culture N47, which was isolated from the investigated test site. On the basis of these and other laboratory-derived enrichment factors from the literature, in situ biodegradation could be quantified for toluene, o-xylene, m/p-xylene, and naphthalene. Stable carbon isotope fractionation in the field was also observed for ethylbenzene, 2-methylnaphthalene, and benzothiophene but without providing conclusive results. Further evidence for the in situ turnover of individual BTEX compounds was provided by the presence of acetophenone, o-toluic acid, and p-toluic acid, three intermediates in the anaerobic degradation of ethylbenzene, o-xylene, and p-xylene, respectively. A number of groundwater samples also contained naphthyl-2-methylsuccinic acid, a metabolite that is highly specific for the anaerobic degradation of 2-methylnaphthalene. Additional metabolites that provided evidence on the anaerobic in situ degradation of naphthalenes were 1-naphthoic acid, 2-naphthoic acid, 1,2,3,4-tetrahydronaphthoic acid, and 5,6,7,8-tetrahydronaphthoic acid. 2-Carboxybenzothiophene, 5-carboxybenzothiophene, a putative further carboxybenzothiophene isomer, and the reduced derivative dihydrocarboxybenzothiophene indicated the anaerobic conversion of the heterocyclic aromatic hydrocarbon benzothiophene. The combined application of CSIA and SMA, as two reliable and independent tools to collect direct evidence on intrinsic bioremediation, leads to a substantially improved evaluation of natural attenuation in situ.

Bacteria, Anaerobic↗

Syntheses of ketonated disulfide-bridged diruthenium complexes via C-H bond activation and C-S bond formation.

The alpha-C-H bonds of 3-methyl-2-butanone, 3-pentanone, and 2-methyl-3-pentanone were activated on the sulfur center of the disulfide-bridged ruthenium dinuclear complex [(RuCl(P(OCH3)3)2)2(mu-S2)(mu-Cl)2] (1) in the presence of AgX (X = PF6, SbF6) with concomitant formation of C-S bonds to give the corresponding ketonated complexes [(Ru(CH3CN)2(P(OCH3)3)2)(mu-SSCHR1COR2)(Ru(CH3CN)3(P(OCH3)3)2)]X3 ([5](PF6)3, R1 = H, R2 = CH(CH3)2, X = PF6; [6](PF6)3, R1 = CH3, R2 = CH2CH3, X = PF6; [7](SbF6)3, R1 = CH3, R2 = CH(CH3)2, X = SbF6). For unsymmetric ketones, the primary or the secondary carbon of the alpha-C-H bond, rather than the tertiary carbon, is preferentially bound to one of the two bridging sulfur atoms. The alpha-C-H bond of the cyclic ketone cyclohexanone was cleaved to give the complex [(Ru(CH3CN)2(P(OCH3)3)2)(mu-SS-1- cyclohexanon-2-yl)(Ru(CH3CN)3(P(OCH3)3)2)](SbF6)3 ([8](SbF6)3). And the reactions of acetophenone and p-methoxyacetophenone, respectively, with the chloride-free complex [(Ru(CH3CN)3(P(OCH3)3)2)2(mu-S2)]4+ (3) gave [(Ru(CH3CN)2(P(OCH3)3)2)(mu-SSCH2COAr)(Ru(CH3CN)3(P(OCH3)3)2)](CF3SO3)3 ([9](CF3SO3)3, Ar = Ph; [10](CF3SO3)3, Ar = p-CH3OC6H4). The relative reactivities of a primary and a secondary C-H bond were clearly observed in the reaction of butanone with complex 3, which gave a mixture of two complexes, i.e., [(Ru(CH3CN)2(P(OCH3)3)20(mu-SSCH2COCH2CH3)(Ru(CH3CN)3(P(OCH3)3)2)](CF3SO3)3 ([11](CF3SO3)3) and [(Ru(CH3CN)2(P(OCH3)3)2)(mu-SSCHCH3COCH3)(Ru(CH3CN)3(P(OCH3)2)](CF3SO3)3 ([12](CF3SO3)3), in a molar ratio of 1:1.8. Complex 12 was converted to 11 at room temperature if the reaction time was prolonged. The relative reactivities of the alpha-C-H bonds of the ketones were deduced to be in the order 2 degrees > 1 degree > 3 degrees, on the basis of the consideration of contributions from both electronic and steric effects. Additionally, the C-S bonds in the ketonated complexes were found to be cleaved easily by protonation at room temperature. The mechanism for the formation of the ketonated disulfide-bridged ruthenium dinuclear complexes is as follows: initial coordination of the oxygen atom of the carbonyl group to the ruthenium center, followed by addition of an alpha-C-H bond to the disulfide bridging ligand, having S=S double-bond character, to form a C-S-S-H moiety, and finally completion of the reaction by deprotonation of the S-H bond.

Journal Article↗

Synthesis, structure, and spectroscopic, photochemical, redox, and catalytic properties of ruthenium(II) isomeric complexes containing dimethyl sulfoxide, chloro, and the dinucleating bis(2-pyridyl)pyrazole ligands.

Two isomeric Ru(II) complexes containing the dinucleating Hbpp (3,5-bis(2-pyridyl)pyrazole) ligand together with Cl and dmso ligands have been prepared and their structural, spectroscopic, electrochemical, photochemical, and catalytic properties studied. The crystal structures of trans,cis-[Ru(II)Cl(2)(Hbpp)(dmso)(2)], 2a, and cis(out),cis-[Ru(II)Cl(2)(Hbpp)(dmso)(2)], 2b, have been solved by means of single-crystal X-ray diffraction analysis showing a distorted octahedral geometry for the metal center where the dmso ligands coordinate through their S atom. 1D and 2D NMR spectroscopy corroborates a similar structure in solution for both isomers. Exposure of either 2a or 2b in acetonitrile solution under UV light produces a substitution of one dmso ligand by a solvent molecule generating the same product namely, cis(out)-[Ru(II)Cl(2)(Hbpp)(MeCN)(dmso)], 4. While the 1 e(-) oxidation of 2b or cis(out),cis-[Ru(II)Cl(2)(bpp)(dmso)(2)](+), 3b, generates a stable product, the same process for 2a or trans,cis-[Ru(II)Cl(2)(bpp)(dmso)(2)](+), 3a, produces the interesting linkage isomerization phenomenon where the dmso ligand switches its bond from Ru-S to Ru-O (K(III)(O)(-->)(S) = 0.25 +/- 0.025, k(III)(O)(-->)(S) = 0.017 s(-1), and k(III)(S)(-->)(O) = 0.065 s(-1); K(II)(O)(-->)(S) = 6.45 x 10(9), k(II)(O)(-->)(S) = 0.132 s(-1), k(II)(S)(-->)(O) = 2.1 x 10(-11) s(-1)). Finally complex 3a presents a relatively high activity as hydrogen transfer catalyst, with regard to its ability to transform acetophenone into 2-phenylethyl alcohol using 2-propanol as the source of hydrogen atoms.

Journal Article↗

Compositional and structural variety of diphenyllead(IV) complexes obtained by reaction of diphenyllead dichloride with thiosemicarbazones.

The reactions of PbPh(2)Cl(2) in methanol with acetophenone, salicylaldehyde, pyridine-2-carbaldehyde, 2-acetylpyridine, and 2-benzoylpyridine thiosemicarbazones (HATSC, HSTSC, HPyTSC, HAcPyTSC, and HBPyTSC, respectively) were explored. Despite the similarities among these ligands, the reactions afforded solids with very diverse compositions and structural characteristics, which were in most cases analyzed by X-ray diffractometry (as was the structure of the free ligand HBPyTSC). In the complexes [PbPh(2)Cl(2)(HATSC)](2), [PbPh(2)Cl(2)(HSTSC)(2)], [(PbPh(2)Cl(HPyTSC)(2))][PbPh(2)Cl(3)(MeOH)](2), and [PbPh(2)Cl(PyTSC)] the metal atoms are surrounded by more or less distorted octahedral coordination polyhedra; if both strong and weak interactions are considered, the lead atom in [PbPh(2)Cl(AcPyTSC)] has coordination number 7 and distorted pentagonal bipyramidal coordination geometry, while [(PbPh(2)(BPyTSC))(2)(PbPh(2)Cl(4))].2MeOH contains two different types of lead atom, one with octahedral and the other with pentagonal bipyramidal coordination. The complexes (H(2)AcPyTSC)[PbPh(2)Cl(3)] and [PbPh(2)Cl(HAcPyTSC)][PbPh(2)Cl(3)], which were also isolated, could not be crystallized. All these complexes are soluble in DMSO, and the compositions of these solutions were investigated using conductivity measurements and (1)H and (207)Pb NMR spectroscopy.

Journal Article↗

Sterically congested tripodal phosphites: conformational analysis, solid-state polymorphism, metal complexation, and application to the asymmetric hydrosilation of ketones.

The synthesis as well as isolation and crystallographic analysis of two solid-state polymorphs of the tripodal ligand tri[2,2',2' '-tris[(2,4,8,10-tetrakis(1,1-dimethylethyl)dibenzo[d,f][1,3,2]dioxaphosphepin-6-yl)oxy]ethyl]amine (3) is described. Form I crystallized from ethyl acetate in the space group P2(1)/n with the unit-cell parameters a = 20.070(10) A, b = 17.477(2) A, c = 27.620(3) A, and beta = 93.050(10) degrees, V = 9674.5(14) A(3), and Z = 4. Form II crystallized from a mixture of acetone and toluene in the space group P1 with the unit-cell parameters a = 12.493(1) A, b = 19.701(2) A, c = 21.027(2) A, alpha = 116.23(1) degrees, beta = 100.15(1) degrees, and gamma = 91.07(1) degrees, V = 4542 A(3), and Z = 2. Differences in the relative absolute stereochemistry of the stereoaxes in the seven-membered dibenzo[d,f][1,3,2]dioxaphosphepin ring are discussed. The synthesis and X-ray characterization of enantiomerically pure (S,S,S)-tri[2,2',2' '-tris[(2,4,8,10-tetrakis(1,1-dimethylethyl)dibenzo[d,f][1,3,2]dioxaphosphepin-6-yl)oxy]propyl]amine [(S,S,S)-7] are reported. Two crystallographically independent molecules exist in the unit cell that cannot be superimposed with each other by either a translation or a symmetry operation. The two solid-state conformers in the unit cell differed predominately by the absolute stereochemistry of the stereoaxes in the seven-membered dibenzo[d,f][1,3,2]dioxaphosphepin ring. The Rh(I)-catalyzed hydrosilation of acetophenone with the chiral ligands (R,R,S)-7 and (S,S,S)-7 showed significant differences in chiral induction. Chiral cooperativity between the stereoaxes and stereocenters in (S,S,S)-7 is observed. The mechanism of the communication between the stereocenters and stereoaxes leading to chiral cooperativity in the stereoselective transition state is suggested to be primarily steric in nature.

Journal Article↗

Interactions of Rh(III)-dihydrido-bis(phosphine) complexes with semicarbazones.

Interaction of cis,trans,cis-[Rh(H)2(PR3)2(acetone)2]PF6 complexes (R = aryl or R3 = Ph2Me, Ph2Et) under H2 with E-semicarbazones gives the Rh(III)-dihydrido-bis(phosphine)-semicarbazone species cis,trans-[Rh(H)2(PR3)2{R'(R' ')C=N-N(H)CONH2}]PF6, where R' and R' ' are Ph, Et, or Me. The complexes are generally characterized by elemental analysis, 31P{1H} NMR, 1H NMR, and IR spectroscopies, and MS. X-ray analysis of three PPh3 complexes reveals chelation of E-semicarbazones by the imine-N atom and the carbonyl-O atom. In contrast, the corresponding reaction of [Rh(H)2(PPhMe2)2(acetone)2]PF6 with acetophenone semicarbazone gives the ortho-metalated-semicarbazone species cis-[RhH(PPhMe2)2{o-C6H4(Me)C=N-N(H)CONH2}]PF6. The X-ray structure of E-propiophenone semicarbazone is also reported. Rhodium-catalyzed, homogeneous hydrogenation of semicarbazones was not observed even at 40 atm H2.

Journal Article↗

Chemistry of ruthenium(II) monohydride and dihydride complexes containing pyridyl donor ligands including catalytic ketone H2-hydrogenation.

In this study we determine the changes to the properties of dihydride catalysts for ketone H2-hydrogenation by successively replacing the amine donors in the known dach complex RuH2(PPh3)2(dach) (2a), dach = 1,2-(R,R)-diaminocyclohexane, with one pyridyl group in the corresponding 2-(aminomethyl)pyridine (ampy) complexes RuH2(PPh3)2(ampy) (2b) and with two pyridyl groups in the complexes RuH2(PPh3)2(bipy) (2c) and RuH2(PPh3)2(phen) (2d). The ruthenium monohydride complex, (OC-6-54)-RuHCl(PPh3)2(ampy), (1b with Cl trans to H) was prepared by the addition of 1 equiv of ampy to RuHCl(PPh3)3 in THF. Treatment of the monohydride complex with K[BH(sec-Bu)3] in THF or KOtBu/H2 in toluene resulted in the formation of a mixture of at least two isomers of the highly reactive, air-sensitive ruthenium dihydride complex 2b. One is the cis dihydride (OC-6-14)-2b or more simply c,t-2b with trans PPh3 groups and another is the cis dihydride c,c-2b (OC-6-42) that has PPh3 trans to H and PPh3 trans to N(pyridyl). The isomer c,c-2b slowly converts to c,t-2b in solution. The reaction of 1b with KOtBu under Ar results in the formation of a mixture that includes a complex with an imino ligand HN=CH-2-py while the same reaction under H2 leads to c,c-2b and then c,t-2b. The dach complex c,t-2a, reacts with ampy, 2,2'-bipyridine (bipy), and 1,10-phenanthroline (phen) in refluxing THF to form the substituted cis-dihydride complexes c,t-2b, (OC-6-13)-RuH2(PPh3)2(bipy) (c,t-2c with trans PPh3 groups) and (OC-6-13)-RuH2(PPh3)2(phen), c,t-2d, respectively. The dihydrides containing amino groups and cis-PPh3 groups, i.e., c,c-2a or c,c-2b, are active precatalysts for the H2-hydrogenation of acetophenone (neat or in benzene) under mild reaction conditions, whereas those with trans-PPh3 groups, c,t-2a and c,t-2b are much less active. The combination of ampy complex 1b and KOtBu also provides a catalyst in benzene that is more active than the corresponding dach system. The complexes without amino groups c,t-2c and c,t-2d are air-stable and inactive as hydrogenation catalysts under comparable conditions. The mechanism of hydrogenation of ketones catalyzed by isomers of 2a,b is thought to be similar and to proceed via a trans-dihydride complex, t,c-2a or t,c-2b, and an amido complex, neither of which are directly observed for the ampy complexes. The dihydride complex c,t-2b reacts with formic acid to give (OC-6-45)-RuH(OCHO)(PPh3)2(ampy), 3b, with formate trans to hydride. The structures of 1b, c,t-2b, c,t-2c, and 3b have been determined by single-crystal X-ray diffraction.

Journal Article↗

New Ru complexes containing the N-tridentate bpea and phosphine ligands: consequences of meridional vs facial geometry.

The synthesis and isolation of the complex cis,fac-[RuIICl2(bpea)(PPh3)][3; bpea = N,N-bis(2-pyridylmethyl)ethylamine] and three geometrical isomers of the complex [RuIICl(bpea)(dppe)](BF4) [4; dppe = (1,2-diphenylphosphino)ethane], trans,fac (4a), cis,fac (4b), and mer(down) (4c), have been described (see Chart 1 for a drawing of their structures). These complexes have been characterized through analytical, spectroscopic (IR, UV/vis, and 1D and 2D NMR), and electrochemical (cyclic voltammetry) techniques. In addition, complexes 3, 4a, and 4b have been further characterized in the solid state through monocrystal X-ray diffraction analysis. The molecular and electronic structures of isomers 4a, 4b, 4c, and 4d (the mer(up) isomer) have also been studied by means of density functional theory (DFT) calculations. Furthermore, their low-energy electronic transitions have been simulated using time-dependent DFT approaches, which have allowed unraveling of their metal-to-ligand charge-transfer nature. Complexes 3 and 4a-c are capable of catalyzing H-transfer types of reactions between alcohols and aromatic ketones such as acetophenone and 2,2-dimethylpropiophenone (DP). A strong influence of the facial versus meridional geometry in the bpea ligand coordination mode is observed for these catalytic reactions, with the meridional isomer being much more active than the facial one. The meridional isomer is even capable of carrying out the H-transfer reaction of bulky substrates such as DP at room temperature.

Journal Article↗

Reactivity at the interface of chiral amphiphilic dendrimers. High asymmetric reduction by NaBH(4) of various prochiral ketones.

New amphiphilic dendrimers derived from PAMAM and D-gluconolactone were found to induce chirality in the reduction of prochiral ketones by NaBH(4), in heterogeneous (THF) and homogeneous (water) conditions. The third generation of these amphiphilic dendrimers, G(3)G, was found to be a good chiral ligand for the reduction of various prochiral ketones in heterogeneous conditions. Even with substrates well-known to give poor results (especially linear ketones), good enantioselectivities were obtained. It is also important to notice that under heterogeneous conditions (THF) the dendrimer could be recovered by filtration, regenerated, and recycled (up to 10 times), leading to reproducible results in asymmetric reduction of ketones. We have also discussed the reduction of acetophenone in water. Evidence is presented that the selectivity is dominated by the architecture of the dendrimer and some supramolecular ordering in the position of the ketone at the chiral solvating interface. The results obtained showed a correlation between stereoselectivity of the reduction and the compact character of the dendritic particles.

Journal Article↗

Oxidation-active flavin models: oxidation of alpha-hydroxy acids by benzo-dipteridine bearing metal-binding site in the presence of divalent metal ion and base in organic solvents.

The oxidizing ability of benzo-dipteridine bearing a bipyridin-6-ylmethyl moiety (4) was found to be increased with Zn(2+) by approximately 10(3)-fold for sulfite addition in MeOH and approximately 10(2)-fold for oxidation of an NADH model in MeCN. It was found for the first time that 4 is able to oxidize alpha-hydroxy acids to alpha-keto acids in the presence of a divalent metal ion such as Zn(2+), Co(2+), and Ni(2+) and an amine base in MeCN or t-BuOH, whereas benzo-dipteridine having a bipyridin-5-ylmethyl moiety (3) is unable to oxidize them under the same conditions. The oxidation reaction was kinetically investigated including the kinetic isotope effect for deuterated mandelic acids (k(H)/k(D) = 2.1-3.7) and the Hammett plots for substituted mandelic acids (V-shaped plots). In the reaction of alpha-substituted alpha-hydroxy acids such as alpha-methyl mandelic and benzylic acids with 4, novel oxidative decarboxylation was found to take place, giving acetophenone and benzophenone, respectively. The oxidation mechanism for mandelic acid was proposed to proceed via a ternary complex of 4.Zn(2+).PhCH(OH)CO(2)(-), in which alpha-oxyanion of mandelate attacks C(4a)-position of 4 to form an adduct followed by 1,2-elimination to afford benzoyl formate and 2e-reduced 4. The roles of the metal ion were proposed as follows; (i) activation of 4, (ii) substrate-binding site, and (iii) activation of the bound alpha-hydroxy acid by lowering pK(a)'s of alpha-OH and alpha-CH. This is a first example that a flavin model oxidizes alpha-hydroxy acids in the presence of a metal ion.

Journal Article↗

Diastereoselective cycloreductions and cycloadditions catalyzed by Co(dpm)(2)-silane (dpm = 2,2,6,6-tetramethylheptane-3,5-dionate): mechanism and partitioning of hydrometallative versus anion radical pathways.

In the presence of phenylsilane and 5 mol % cobalt(II) bis(2,2,6,6-tetramethylheptane-3,5-dionate), aryl-substituted monoenone monoaldehydes and bis(enones) undergo reductive cyclization to afford syn-aldol and anti-Michael products, respectively. For both aldol and Michael cycloreductions, five- and six-membered ring formation occurs in good yield with high levels of diastereoselectivity. Cycloreduction of monoenone monoaldehyde 1a in the presence of d(3)-phenylsilane reveals incorporation of a single deuterium at the enone beta-position as an equimolar mixture of epimers, inferring rapid isomerization of the kinetically formed cobalt enolate prior to cyclization. The deuterated product was characterized by single-crystal neutron diffraction analysis. For bis(enone) substrates, modulation of the silane source enables partitioning of the competitive Michael cycloreduction and [2 + 2] cycloaddition manifolds. A study of para-substituted acetophenone-derived bis(enones) reveals that substrate electronic features also direct partitioning of cycloreduction and cycloaddition manifolds. Further mechanistic insight is obtained through examination of the effects of enone geometry on product stereochemistry and electrochemical studies involving cathodic reduction of bis(enone) substrates. The collective experiments reveal competitive enone reduction pathways. Enone hydrometalation produces metallo-enolates en route to aldol and Michael cycloreduction products, that is, products derived from coupling at the alpha-position of the enone. Electron-transfer-mediated enone reduction produces metallo-oxy-pi-allyls en route to [2 + 2] cycloadducts and, under Ni catalysis, homoaldol cycloreduction products, that is, products derived from coupling at the beta-position of the enone. The convergent outcome of the metal-catalyzed and electrochemically induced transformations suggests the proposed oxy-pi-allyl intermediates embody character consistent with the mesomeric metal-complexed anion radicals.

Anions↗

A general catalytic allylation using allyltrimethoxysilane.

A general and mild catalytic allylation of carbonyl compounds, applicable to aldehydes, ketones, and imines is developed using allyltrimethoxysilane as the allylating reagent. The reaction proceeds smoothly with 1-10 mol % of CuCl and TBAT in THF at ambient temperature. Mechanism studies indicated that the copper alkoxide, allylfluorodimethoxysilane, and allyltrimethoxysilane are essential to promote the reaction efficiently. Preliminary extension of the reaction to the first catalytic enantioselective allylation of ketones using an allylsilane produced the product with 61% ee from acetophenone, using a CuCl-p-tol-BINAP-TBAT catalyst (15 mol %).

Journal Article↗

Remarkably favorable hydration of carbonyl substituents in dicationic bis(arene) ruthenium complexes.

The addition of water and methanol to the carbonyl substituents in the dicationic bis(arene)ruthenium complexes [(p-cymene)Ru(C6H5CHO)][OTf]2 (1) and [(p-cymene)Ru(C6H5C(O)CH3)][OTf]2 (2) is remarkably favorable-the equilibrium constants for these reactions are 1 million times greater than those for uncomplexed benzaldehyde and acetophenone. The addition of methanol to the carbonyl group in the o-anisaldehyde complex, [(p-cymene)Ru(C6H4{OCH3}CHO)][OTf]2 (6), occurs with a high degree of kinetic selectivity (94% de).

Journal Article↗

A ruthenium-catalyzed reaction of aromatic ketones with arylboronates: a new method for the arylation of aromatic compounds via C-H bond cleavage.

The ruthenium-catalyzed reaction of aromatic ketones with arylboronic acid esters (arylboronates) gave the ortho arylation product. For this coupling reaction, a RuH2(CO)(PPh3)3 complex exhibited the highest catalytic activity among the complexes screened. Several aromatic ketones, for example, acetophenones, acetonaphthone, alpha-tetralone, and benzosuberone, can be used in this coupling reaction. A variety of arylboronates containing electron-donating (OMe and NMe2) and -withdrawing (F and CF3) groups were found to react with aromatic ketones to give the corresponding aylation products. The corresponding arylboronic acids could be used in this coupling reaction, but the yields were slightly lower, as compared to those of the reaction using the corresponding arylboronates.

Journal Article↗

Mechanism of asymmetric hydrogenation of ketones catalyzed by BINAP/1,2-diamine-rutheniumII complexes.

Asymmetric hydrogenation of acetophenone with trans-RuH(eta(1)-BH(4))[(S)-tolbinap][(S,S)-dpen] (TolBINAP = 2,2'-bis(di-4-tolylphosphino)-1,1'-binaphthyl; DPEN = 1,2-diphenylethylenediamine) in 2-propanol gives (R)-phenylethanol in 82% ee. The reaction proceeds smoothly even at an atmospheric pressure of H(2) at room temperature and is further accelerated by addition of an alkaline base or a strong organic base. Most importantly, the hydrogenation rate is initially increased to a great extent with an increase in base molarity but subsequently decreases. Without a base, the rate is independent of H(2) pressure in the range of 1-16 atm, while in the presence of a base, the reaction is accelerated with increasing H(2) pressure. The extent of enantioselection is unaffected by hydrogen pressure, the presence or absence of base, the kind of base and coexisting metallic or organic cations, the nature of the solvent, or the substrate concentrations. The reaction with H(2)/(CH(3))(2)CHOH proceeds 50 times faster than that with D(2)/(CD(3))(2)CDOD in the absence of base, but the rate differs only by a factor of 2 in the presence of KO-t-C(4)H(9). These findings indicate that dual mechanisms are in operation, both of which are dependent on reaction conditions and involve heterolytic cleavage of H(2) to form a common reactive intermediate. The key [RuH(diphosphine)(diamine)](+) and its solvate complex have been detected by ESI-TOFMS and NMR spectroscopy. The hydrogenation of ketones is proposed to occur via a nonclassical metal-ligand bifunctional mechanism involving a chiral RuH(2)(diphosphine)(diamine), where a hydride on Ru and a proton of the NH(2) ligand are simultaneously transferred to the C=O function via a six-membered pericyclic transition state. The NH(2) unit in the diamine ligand plays a pivotal role in the catalysis. The reaction occurs in the outer coordination sphere of the 18e RuH(2) complex without C=O/metal interaction. The enantiofaces of prochiral aromatic ketones are kinetically differentiated on the molecular surface of the coordinatively saturated chiral RuH(2) intermediate rather than in a coordinatively unsaturated Ru template.

Journal Article↗