Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Perchlorates”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27Linked to original sources

On the viscosity of composite suspensions of aluminum and ammonium perchlorate particles dispersed in hydroxyl terminated polybutadiene--New empirical model.

The rheological properties of fuel suspensions with various solid loadings up to close their maximum packing fraction and suspending media having different viscosities are investigated using the rotational viscometer at relatively low shear rates in which suspensions behave as Newtonian fluids. Aluminum (Al) and ammonium perchlorate (AP) particles are major solid components of any solid fuel system which should be distributed uniformly inside a polymeric binder based on hydroxyl terminated polybutadiene (HTPB). The experimental data generated in this investigation indicates that the relative viscosity of the suspensions is independent of viscosity of polymer binder, but in addition to solid content, geometrical aspects of the solid particles affect strongly the relative viscosity of suspensions. Maximum packing fraction of filler is found to be suitable quantitative measure of filler characteristics such as size, size distribution, shape and structure. Consequently, it is revealed that the relative viscosity of fuel suspension is a unique function of reduced volume fraction (Phi). Based on analogy of viscosity enhancement of reactive resin with cure conversion and suspension with filler content, an empirical model with two adjustable parameters originated from resin gelation model is suggested. According to this model and experimental results obtained in this investigation, a generalized model is proposed to describe the relative viscosity as a function of solid content in which the adjustable parameters are found to be general constants. The generalized model which is expressed as mu(r) = (1-Phi)(0.3 Phi-2) is found to be quite accurate to predict the experimental data. Furthermore, the applicability and accuracy of the generalized model are evaluated using the viscosity data of some suspension systems reported in the literature.

Journal Article↗

Fluorimetric determination of biogenic 5-hydroxy- and 5-methoxyindoles by high-performance liquid chromatography using perchloric acid as post-column reagent.

A method for the determination of biogenic 5-hydroxy- and 5-methoxyindoles using high-performance liquid chromatography with fluorescence detection was developed. The specific fluorescence of these indoles induced by perchloric acid was utilized as the post-column detection system. The determination limits were 3 pmol for 5-hydroxy-L-tryptophan and 5 pmol for serotonin (5-HT) and 5-hydroxyindole-3-acetic acid (HIAA). The method was applied to the determination of 5-HT and HIAA in rat brain tissues using 5-hydroxygramine as the internal standard.

Animals↗

A new antitumor agent: methyl sulfonium perchlorate of echinomycin.

Newly modified-echinomycin such as S-methylated sulfonium perchlorate of echinomycin (1), monosulfoxide (2), disulfoxid (3) and sulfone (4) have been prepared and evaluated for in vitro biological activities of cytotoxicity against P388, B16 and SNU-16 as well as in vivo antitumor activity against murine leukemia P388 and melanoma B16.

Animals↗

Analysis of the fatty acid components in a perchloric acid-soluble protein.

We had previously found that a perchloric acid-soluble protein (PSP1) occurs in rat liver, and that this novel protein inhibits protein synthesis in a rabbit reticulocyte lysate system (T. Oka, H. Tsuji, C. Noda, K. Sakai, Y.-H. Hong, I. Suzuki, S. Muñoz, Y. Natori, J. Biol. Chem. 270 (1995) 30060-30067). In the present study, we analyzed lipid components bound to PSP1. Native PSP1 was purified from rat liver using Sephadex G-75, DE-52 cellulose and IgGPSP-affinity chromatography, and the lipid components were extracted. The components obtained from the purified PSP1 were shown to be free fatty acids by thin-layer chromatography. By GC-MS, six major fatty acids were identified as 14:0, 16:0, 18:0, 18:1, 18:2 and 20:4. 1 mol of PSP1 contained 1.26 mol of total fatty acid components. The fatty acid-binding assay of PSP1 showed that the Bmax was 1.25 mol fatty acid/mol PSP1 and the Kd value for palmitic acid was 6.03 microM. The concentration of PSP1 mRNA in rat liver increased 2.3-fold by the administration of peroxisome proliferator, bezafibrate. These findings show that PSP1 is a fatty acid-binding protein-like protein, which is involved in the intracellular metabolism of fatty acid and is quite different from the known fatty acid-binding proteins.

Animals↗

Lateral diffusion of 1,1'-dioctadecyl-3,3,3'3'-tetramethylindocarbocyanine perchlorate at the interfaces of C18 and chromatographic solvents

The influence of mobile phase on the lateral diffusion of an amphiphilic dye was studied for four chromatographic interfaces using fluorescence correlation spectroscopy. The fluorescent dye was DiI (1,1'-dioctadecyl-3,3,3'3'-tetramethylindocarbocyanine perchlorate); the stationary phase was a covalently bonded monolayer of dimethyloctadecylsiloxane on fused silica; and the four mobile phases were acetonitrile, methanol, tetrahydrofuran, and water. Time-resolved measurements at varying focal positions of the microscope confirmed negligible fluorescence from solution. Single-molecule spectroscopy showed that exchange between mobile and immobile adsorbates was negligible. The lateral diffusion of DiI was the fastest for tetrahydrofuran, D = 5.3 x 10(-5) cm2/s, and slowest for water, D = 2.5 x 10(-6) cm2/s. Methanol and acetonitrile gave intermediate rates of diffusion, D = 3.4 x 10(-6) and 4.8 x 10(-6), respectively. There was no correlation of the lateral diffusion coefficient with solvent viscosity, a weak correlation with interfacial tension, and a strong correlation with 13C NMR line shapes for the terminal methyl group of the hydrocarbon chain. The increased wetting of the C18 interphase in the order water < methanol < acetonitrile < tetrahydrofuran agreed with data for the miscibility of these solvents with n-hexadecane. It is concluded that the wetting of the hydrocarbon interphase by the mobile phase enhances the lateral diffusion of the amphiphile.

Journal Article↗

Characterization of the Ni(III) intermediate in the reaction of (1,4,8,11-tetraazacyclotetradecane)nickel(II) perchlorate with KHSO5: implications to the mechanism of oxidative DNA modification.

We report the detection and characterization of the Ni(III) intermediates generated by reaction of (1,4,8,11-tetraazacyclotetradecane)nickel(II) perchlorate with KHSO5. Four Ni(III) intermediates can be trapped or detected through variation in Cl- or KHSO5 concentrations. Upon oxidation of [Ni(cyclam)]2+ by 2.5 equiv of KHSO5, deprotonation of the cyclam ligand generates two red Ni(III) species with lambda max = 530 nm and g perpendicular = 2.20 and g parallel = 2.02 or g perpendicular = 2.16 and g parallel = 2.01 for the axial 4-coordinate or 6-coordinate dichloride species, respectively. These forms decay to Ni(II) products via complex ligand oxidation mechanisms. The Ni(III) dichloride species can be reprotonated and subsequently binds to DNA via an outer-sphere interaction as evidenced by the inverted sign of the CD signal near 400 nm. Cumulatively, the results indicate that the Ni(III) center is coordinately saturated under excess chloride conditions but is still able to interact with DNA substrates. This suggests alternative mechanistic pathways for DNA modification by reaction of [Ni(cyclam)]2+ with KHSO5 and possibly other Ni(II) complexes as well.

Circular Dichroism↗

Multielectron atom transfer reactions of perchlorate and other substrates catalyzed by rhenium oxazoline and thiazoline complexes: reaction kinetics, mechanisms, and density functional theory calculations.

The title complexes, the Re(O)L(2)(Solv)(+) complexes (L = hoz, 2-(2'-hydroxyphenyl)-2-oxazoline(-) or thoz, 2-(2'-hydroxyphenyl)-2-thiazoline(-); Solv = H(2)O or CH(3)CN), are effective catalysts for the following fundamental oxo transfer reaction between closed shell molecules: XO + Y --> X + YO. Among suitable oxygen acceptors (Y's) are organic thioethers and phosphines, and among suitable oxo donors (XO's) are pyridine N-oxide (PyO), t-BuOOH, and inorganic oxyanions. One of the remarkable features of these catalysts is their high kinetic competency in effecting perchlorate reduction by pure atom transfer. Oxo transfer to rhenium(V) proceeds cleanly to afford the cationic dioxorhenium(VII) complex Re(O)(2)L(2)(+) in a two-step mechanism, rapid substrate (XO) coordination to give the precursor adduct cis-Re(V)(O)(OX)L(2)(+) followed by oxygen atom transfer (OAT) as the rate determining step. Electronic variations with PyO derivatives demonstrated that electron-withdrawing substituents accelerate the rate of Re(VII)(O)(2)L(2)(+) formation from the precursor adduct cis-Re(V)(O)(OX)L(2)(+). The activation parameters for OAT with picoline N-oxide and chlorate have been measured; the entropic barrier to oxo transfer is essentially zero. The potential energy surface for the reaction of Re(O)(hoz)(2)(OH(2))(+) with PyO was defined, and all pertinent intermediates and transition states along the reaction pathway were located by density functional theory (DFT) calculations (B3LYP/6-31G). In the second half of the catalytic cycle, Re(O)(2)L(2)(+) reacts with oxygen acceptors (Y's) in second-order reactions with associative transition states. The rate of OAT to substrates spans a remarkable range of 0.1-10(6) L mol(-)(1) s(-)(1), and the substrate reactivity order is Ph(3)P > dialkyl sulfides > alkyl aryl sulfides > Ph(2)S approximately DMSO, which demonstrates electrophilic oxo transfer. Competing deactivation and inhibitory pathways as well as their relevant kinetics are also reported.

Journal Article↗

Cis Effects in the Cobalt Corrins. 1. Crystal Structures of 10-Chloroaquacobalamin Perchlorate, 10-Chlorocyanocobalamin, and 10-Chloromethylcobalamin.

The crystal structures of 10-chloroaquacobalamin perchlorate hydrate (10-Cl-H(2)OCbl.ClO(4)) (Mo Kalpha, 0.710 73 Å, monoclinic system, P2(1), a = 11.922(4) Å, b = 26.592(10) Å, c = 13.511(5) Å, beta = 93.05(3) degrees, 10 535 independent reflections, R(1) = 0.0426), 10-chlorocyanocobalamin-acetone hydrate (10-Cl-CNCbl) (Mo Kalpha, 0.710 73 Å, orthorhombic system, P2(1)2(1)2(1), a = 16.24(3) Å, b = 21.85(5) Å, c = 26.75(8) Å, 7699 independent reflections, R(1) = 0.0698), and 10-chloromethylcobalamin-acetone hydrate (10-Cl-MeCbl) (Mo Kalpha, 0.71073 Å, orthorhombic system, P2(1)2(1)2(1), a = 16.041(14) Å, b = 22.13(2) Å, c = 26.75(4) Å, 6792 independent reflections, R(1) = 0.0554), in which the C10 meso H is substituted by Cl, are reported. An unusual feature of the structures is disorder in the C ring, consistent with a two-site occupancy in which the major conformation has the C46 methyl group in the usual position, "upwardly" axial, and the C47 methyl group equatorial, while in the minor conformation both are pseudoequatorial, above and below the corrin ring. (13)C NMR chemical shifts of C46, C47, C12, and C13 suggest that the C ring disorder may persist in solution as a ring flip. Since molecular dynamics simulations fail to reveal any population of the minor conformation, the effect is likely to be electronic rather than steric. The axial bond lengths in 10-Cl-MeCbl are very similar to those in MeCbl (d(Co)(-)(C) = 1.979(7) vs 1.99(2); to 5,6-dimethylbenzimidazole, d(Co)(-)(NB3) = 2.200(7) vs 2.19(2)), but the bonds to the four equatorial N donors, d(Co)(-)(N(eq)), are on average 0.05 Å shorter. In 10-Cl-CNCbl, d(Co)(-)(C) and d(Co)(-)(NB3) are longer (by 0.10(2) and 0.03(1) Å, respectively) than the bond lengths observed in CNCbl itself, while conversely, the C-N bond length is shorter by 0.06(2) Å, but there is little difference in d(Co)(-)(N(eq)). The Co-O bond length to coordinated water in 10-Cl-H(2)OCbl(+) is very similar to that found in H(2)OCbl(+) itself, but the d(Co)(-)(NB3) bond is longer (1.967 vs1.925(2) Å), while the average d(Co)(-)(N(eq)) is very similar. The coordinated water molecule in 10-Cl-H(2)OCbl(+) is hydrogen bonded to the c side chain carbonyl oxygen, as in H(2)OCbl(+). NMR observations indicate that the H bond between coordinated H(2)O and the c side chain amide persists in solution. The equilibrium constant, K(Co), for coordination of bzm to Co(III) is smaller in 10-Cl-MeCbl and 10-Cl-CNCbl than in their C10-unsubstituted analogs (181 vs 452; 4.57 x 10(3) vs 3.35 x 10(5)), but could not be determined for 10-Cl-H(2)OCbl because hydrolysis of the phosphodiester is competitive with the establishment of the base-off equilibrium. Substitution of H by Cl at C10 causes the bands in the electronic spectrum of 10-Cl-XCbl complexes to move to lower energy, which is consistent with an increase in electron density in the corrin pi-conjugated system. This increased electron density is not due to greater electron donation from the axial ligand as bonds between these and the metal are either longer (not shorter) or unchanged, and it most probably arises from pi-donation to the corrin by Cl at C10. As the donor power of X increases (H(2)O < CN(-) < Me), the corrin ring becomes more flexible to deformation, and the number of bond lengths and bond angles that are significantly different in XCbl and 10-Cl-XCbl increases; importantly, the C10-Cl bond length, d(C10)(-)(Cl), increases as well. Thus, despite the fact that chlorine is an inductively electron withdrawing substituent, its resonance electron donation is the more important effect on electron distribution in the corrin ring. Mulliken charges obtained from semiempirical RHF-SCF MO calculations using the ZINDO/1 model on XCbl and their 10-Cl analogs at the crystal structure geometry are shown to correlate reasonably well with (13)C NMR shifts and may be used to determine the pattern of electron distribution in these complexes. Substitution by Cl at C10 causes an increase in charge density at Co when X = H(2)O and CN(-), while the charge density on the four equatorial N donors remains virtually unchanged, but a decrease when X = Me, while the charge density on the equatorial N donors also decreases. In response, d(Co)(-)(NB3) increases in the first two complexes but the equatorial bond lengths remain virtually unchanged, while d(Co)(-)(NB3) remains unchanged and the average d(Co)(-)(N(eq)) decreases in 10-Cl-MeCbl. Furthermore, the partial charge on chlorine increases as the donor power of X increases. The small decrease in the pK(a) of coordinated H(2)O in 10-Cl-H(2)OCbl(+) compared to H(2)OCbl(+) itself (7.65 vs 8.09) is due to a decreased charge density on oxygen in 10-Cl-OHCbl compared to OHCbl. The picture that emerges, therefore, is of competitive electron donation by X and Cl toward the corrin system. In 10-Cl-CNCbl, the decrease in the C&tbd1;N bond length as Co-C increases compared to CNCbl suggests that dpi-ppi bonding between cobalt and cyanide is important. (13)C and (15)N NMR observations on 10-Cl-(13)C(15)NCbl are consistent with these effects.

Journal Article↗

Single-Crystal EPR and X-Ray Studies of Magnetic Exchange Interactions and the Molecular Structure of Dipropylenetriamineethylenediaminecopper(II) Perchlorate, [Cu(dpt)(en)](ClO(4))(2).

The monomeric copper complexes [Cu(dpt)(en)](ClO(4))(2) (1) and [Zn/Cu(dpt)(en)](ClO(4))(2) (2) (dpt = dipropylenetriamine; en = ethylenediamine) were synthesized. The complexes crystallize in space group Pbca with cell parameters a =14.311(5) Å, b = 16.638(2) Å, c = 15.234(4) Å, alpha = beta = gamma = 90 degrees, V = 3627(2) Å(3), and Z = 8. The molecular structure of the complex tends toward trigonal bipyramidal symmetry. Angular, frequency-dependent EPR line widths and line shapes have been studied in detail to estimate the intrastack (J) as well as the interstack (J') exchange interactions. The calculated correlation time t(c) for interchain spin diffusion is 1.2 x 10(-)(9) s using the dependence of line width at X- and Q- band frequencies. The ratio J'/J = 6 x 10(-)(2) at 298 K and the line shapes indicate quasi-one-dimensional behavior. The exchange interaction pathway is most probably favored by the perchlorate anion.

Journal Article↗

Bis(pyridine)-based bromonium ions. Molecular structures of bis(2,4,6-collidine)bromonium perchlorate and bis(pyridine)bromonium triflate and the mechanism of the reactions of 1,2-bis(2'-pyridylethynyl)benzenebrominum triflate and bis(pyridine)bromonium triflate with acceptor olefins.

1,2-Bis(2'-pyridylethynyl)benzenebromonium triflate (4) and bis(pyridine)bromonium triflate (5) have been prepared and the mechanism of their reaction with various acceptors including eight alkenes of various structure, collidine, and Br(-) are reported. The reaction of 4 with neutral acceptors is second-order overall and involves a preequilibrium dissociation of the bidentate-bound Br(+) to form an unstable monodentate open form (4-op), which reacts with all neutral acceptors at or near the diffusion limit. Br(-) reacts with 4 by a different mechanism involving a direct nucleophilic attack on the Br(+). The reaction of 5 with acceptors proceeds by a dissociative mechanism to reversibly form an unstable intermediate (pyr-Br(+)), which reacts with 4-penten-1-ol, 4-pentenoic acid adamantylidineadamantane and cyclohexene with nearly the same selectivity. The crystal and molecular structures of bis(2,4,6-collidine)bromonium perchlorate (2-ClO(4)) and 5 were determined by X-ray crystallography.

Journal Article↗

Structural investigation of Pd(II) in concentrated nitric and perchloric acid solutions by XAFS.

XAFS spectra of palladium(II) in concentrated HNO3/HClO4 acid mixtures have been recorded and analyzed. Structural parameters of the Pd(H2O)4(2+) complex and the mixed nitric Pd(NO3)2(H2O)2 complex, for the first time, were determined by the XAFS method. For pure 5 M HClO4 and for mixtures (0-0.3 M HNO3), the XAFS spectra of the 0.02 M Pd solutions are indeed very similar and originated from four Pd-O(w) equivalent distances. For the Pd(H2O)4(2+) square-planar aqua ion in strong perchloric acid, the use of an FEFF6 theoretical approach led to a first-shell Pd-O(w) distance of 2.00 (1) A and a Debye-Waller (DW) factor of sigma2 = 0.0030 (3) A2. Four water molecules are tightly bound to the Pd2+ ion in the equatorial plane, while two (or one) axial water molecules are weakly bound to the metal ion at 2.5 A with a DW factor of 0.015 (5) A2. For highly concentrated mixtures (4-6 M HNO3) and for pure concentrated (4-6 M) nitric acid as well as for crystalline powder Pd(NO3)2(H2O)2, the XAFS spectra are very similar and are determined by the mixed nitric complex Pd(NO3)2(H2O)2: four Pd-O near-equivalent distances of 2.01 (1) A from two H2O and two NO3 molecules with a total DW factor of sigma2 = 0.0037 (3) A2. Moreover, two Pd---N distances of 2.8-2.9 A were determined in the second coordination shell. Finally, for intermediate mixtures (1-3 M HNO3 in 5 M HClO4), the XAFS spectra are a superposition of the XAFS of Pd(H2O)4(2+) and Pd(NO3)2(H2O)2 complexes. The mean ligand number NO3(-) around Pd2+ has been calculated, and the XAFS results at pH close to zero confirm the spectrophotometric results previously published.

Journal Article↗

Perchlorate interchange during the redox process of PPy/PVS films in an acetonitrile medium. a voltammetric and EDX study.

Polypyrrole/poly(vinyl sulfonate) (PPy/PVS) films in acetonitrile containing 0.1 M LiClO4 were studied by cyclic voltammetry. Consecutive voltammograms pointed to a continuous increase in the charge involved in the process, suggesting a rise in the number of the electroactive participants involved in the redox process. However, voltammograms obtained for the PPy/ClO4 films in analogous conditions pointed to a steady-state behavior from the very early cycles. Theoretical studies based on the Nernst and Butler-Volmer equations indicated that perchlorate ions are involved during the oxidation/reduction process of the PPy/PVS films when the steady state is reached. This result was confirmed by "ex situ" energy-dispersive X-ray analysis of the films. In this regard, the electrochemical behavior of PPy/PVS polymers was similar to that of PPy/ClO4 films when a high number of cycles were carried out. The exchange of ClO4- during the redox reaction of the PPy/PVS films made it necessary to incorporate Li+ cations inside the polymer during the initial voltammetric cycles to compensate for the negative charges of PVS polyanions. Li+ cations are mainly stabilized inside the polymer by the ion pairs formed with the sulfonated groups of the PVS. An increase and shift of the voltammetric cycles indicated a restructuring of the polymeric chains with consecutive scans.

Journal Article↗

Ferroelectricity of pyridinium perchlorate, a molecular level point of view.

The behavior of ferroelectric and thermodynamic parameters of pyridinium perchlorate (PyClO(4)) was simulated based on experimental NMR data and properties of the individual constituting ions. Dynamic (2)H NMR spectroscopy was used to investigate the order-disorder character of ferroelectricity in PyClO(4). Quadrupole echo and inversion recovery experiments were performed in the range from 140 to 300 K. The spectra can be simulated by a rotational jump motion of the pyridinium cations about their pseudo-C(6) axis. This confirms that the ferroelectricity of this compound below a first-order phase transition at 248 K is primarily due to the ordering of cations along a ferroelectric axis. In an intermediate phase between 248 and 233 K, the cation-anion sublattice displacement mechanism also gives a small positive contribution to ferroelectricity. In the family of the ferroelectric pyridinium salts, the paraelectric-ferroelectric phase transition temperature increases with the size and polarizability of the constituting anions, suggesting that the main interaction for ferroelectric ordering occurs via an indirect superexchange mechanism, whereas in compounds with small anions of low polarizability the direct dipole-dipole interaction dominates and leads to antiferroelectric order.

Journal Article↗

Oxidation of adsorbed CO on Pt(111) in CO-saturated perchloric acid aqueous solutions: simultaneous in situ time-resolved reflectance spectroscopy and second harmonic generation studies.

Simultaneous normalized differential reflectance spectroscopy (DeltaR/R) and second harmonic generation (SHG) has been employed to follow, independently, OH and adsorbed CO (CO(ads)) on a single Pt(111) microfacet in CO-saturated aqueous perchloric acidic solutions during voltammetric cycles, leading to the oxidation of CO(ads) and subsequent readsorption of CO on the surface. The results obtained are consistent with the disruption of the radical19 x radical19R19.1 degrees phase just prior to the oxidation of adsorbed CO.

Letter↗

Column chromatographic pre-concentration of iron(III) in alloys and biological samples with 1-nitroso-2-naphthol-3,6-disulphonate and benzyldimethyltetradecylammonium-perchlorate adsorbent supported on naphthalene using atomic absorption spectrometry.

The solid ion-pair material produced from the reaction between benzyldimethyltetradecylammonium chloride (BDTA) and sodium perchlorate on naphthalene provides the basis for a simple, rapid and selective technique for pre-concentrating iron from up to 500 ml of aqueous solution. Iron reacts with disodium 1-nitroso-2-naphthol-3,6-disulphonate (Nitroso-R salt) to form a water-soluble coloured chelate anion. The iron chelate anion forms a water-insoluble, stable iron-Nitroso-R-BDTA complex on naphthalene packed in a column. Trace amounts of iron are quantitatively retained on naphthalene in the pH range 3.5-7.5 and at a flow-rate of 1-2 ml min-1. The solid mass is dissolved out from the column with 5 ml of N,N-dimethylformamide and iron is determined by means of an atomic absorption spectrometer at 248 nm. The calibration graph is linear for concentrations of iron over the range of 0.5-20 micrograms in 5 ml of final solution. The standard deviation and relative standard deviation were calculated. The detection limit of the method was 0.0196 micrograms ml-1 of iron. The sensitivity for 1% absorption was 0.072 microgram ml-1 (0.165 microgram ml-1 by direct atomic absorption spectrometry of aqueous solution). The proposed method was applied to the determination of iron in standard alloys and biological samples.

Adsorption↗

A perchlorate-selective membrane electrode based on a Cu(II) complex of the ligand 1,4,8,11-tetra(n-octyl)-1,4,8,11-tetraazacyclotetradecane.

The new cyclic polyazacycloalkane 1.4,8,11-tetra(n-octyl)-1,4,8,11-tetraazacyclotetradecane (L1) was synthesised and the copper(II) complex [Cu(L1)]2+ characterised. Different electrodes were prepared using the [Cu(L1)]2+ complex as ionophore, PVC as plastic matrix and o-nitrophenyl octyl ether (NPOE), bis(2-ethylhexyl) sebacate (BEHS) or dibutyl phthalate (DBP) as plasticizers. The electrode containing DBP showed a Nernstian response over a wide pH range and a fast response time (ca. 3 s) whereas NPOE and BEHS gave near-Nernstian slopes. Selectivity coefficients for the different anions with respect to perchlorate were calculated. The response of the electrodes basically followed the Hofmeister sequence, suggesting that interaction of the ionophore with the anions is via electrostatic forces rather than due to anion coordination to the axial sites of the square-planar [Cu(L1)]2+ complex.

Journal Article↗