Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Iodates”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27Linked to original sources

Vanadate is a potent competitive inhibitor of phospholipase C from Bacillus cereus.

Monomeric vanadate is a potent competitive inhibitor of phospholipase C from Bacillus cereus, much better than other oxyanions (e.g., phosphate or iodate). The apparent efficiency of inhibition depends on the substrate aggregate structure. The measured inhibition constant with respect to monomeric phosphatidylcholine substrate is 0.21 mM under conditions where the K(m) is 0.12 mM; for micellar substrate the apparent Ki appears much lower and in fact tracks the apparent K(m) which decreases 10-fold. Vanadate inhibition is removed by addition of exogenous diacylglycerol, which by itself is an inhibitor. In contrast to its effect with monomeric or micellar substrate, vanadate does not strongly inhibit the PLC-catalyzed hydrolysis of small unilamellar vesicles of phosphatidylcholine. These results are interpreted in terms of the surface binding of the enzyme. Because of its ability to mimic the transition state of phosphate ester hydrolysis vanadate is also used to investigate the constraints on the occurrence of strained cyclic intermediates in phospholipid hydrolysis by PLC.

Bacillus cereus↗

Cationic surfactant as a sensitizer for the spectrophotometric determination of hydrogen sulphide in air and evaluation of a new absorbing medium containing triethanolamine-zinc acetate-sodium hydroxide.

An extractive spectrophotometric method for the determination of trace amounts of hydrogen sulphide after fixing the gas in triethanolamine (TEA)-zinc acetate-sodium hydroxide solution is described. The method is based on the reaction of iodate with hydrogen sulphide in the presence of acid and excess chloride ion leading to the formation of ICl2- species which is used to iodinate 2',7'-dichlorofluorescein to form 2',7'-dichloro-4',5'-diiodofluorescein. The iodinated product formed is extracted into an organic solvent and sensitized by equilibrating with a cationic surfactant, cetrimide, in the presence of acetate buffer (pH 5.9 +/- 0.1). The colour system obeys Beer's law over the range 0-1 microg of hydrogen sulphide and the relative standard deviation is 2.4% for 10 determinations at 0.75 microg of hydrogen sulphide. The effect of interfering gases on the determination is discussed. The proposed absorbing solution has been evaluated using a hydrogen sulphide permeation device. This absorbing solution has an absorption efficiency of > 93% at a flow rate of 1.5 litre min(-1) for a sampling period of 2 h. The fixed H2S is stable for 40 days. The method has been applied to determine residual H2S levels in a laboratory fume hood and in the vicinity of sewage pumping station. The method can be used to determine as little as 0.05 microg of hydrogen sulphide.

Journal Article↗

Determination of inorganic anions via postcolumn reaction with iodide in ion chromatography.

Inorganic anions were determined as triiodide by postcolumn reaction with iodide under an acidic condition with help of alpha-cyclodextrin in ion chromatography. Analytes reacting with iodide to produce iodine could be determined by the present method. The analytes were indirectly detected at 287 or 355 nm. The presence of alpha-cyclodextrin caused an increase in the concentration of triiodide, leading to improvement of the sensitivity. The present system achieved good selectivity to iodate, bromate and nitrite as well as good repeatability under the optimum conditions. The determination of nitrite in river water was possible.

Anions↗

Spectrophotometric determination of some vic-diol containing drugs using ion-exchange resins.

Periodic acid and its salts have been widely used for the quantitative oxidation of vic-diol containing compounds including carbohydrates and catecholamine drugs. The advantage of using a polymeric resin (periodate form) over free periodate ions is that the resin quantitatively retains both unconsumed periodate ions and the iodate ions produced in the oxidation and, hence, enables one to undertake further studies on the structural, synthetic or preparative work. The resin (periodate form) was found to be a clean and sensitive chromogenic reagent for the spectrophotometric determination of some catecholamine drugs. The calibration graphs of absorption versus concentration in the range studied (5-50 ppm) were linear.

Epinephrine↗

Comparison of methods for preparation of 125I brachytherapy source cores for the treatment of eye cancer.

Two procedures for fixing the 125I activity on different matrices were explored. In the first method, anodic deposition of 125I on silver wire was used. In the second, 125I was adsorbed as iodate (IO3-) on alumina microspheres by using a solid-solution interface technique. While the 125I uptake was approximately 84% on the silver wires by electrodeposition method, the microspheres showed approximately 97% by the solid-solution interface technique. The low leachable (0.05%) wires, and comparatively high leachable (approximately 4%) spheres were trial encapsulated and laser welded. The encapsulated sources were measured for source strength and were found to be suitable for the treatment of eye cancer.

Adsorption↗

Radiosynthesis and quality assurance of 5-[124I]Iodo-2'-deoxyuridine for functional PET imaging of cell proliferation.

5-[124I]Iodo-2'-deoxyuridine ([124I]IUdR) was routinely produced by direct electrophilic labelling of 2'-deoxyuridine with 124I of high specific activity (12 Ci/micromol) in an Iodogen-coated ReactiVial, followed by purification on a Sep-Pak C-18 cartridge. The radiochemical purity was determined by TLC on a Silicagel-60 plate and by reverse-phase HPLC on a RP-18 column. Based upon 45 syntheses, the yield ranged from 45% to 65%. The radiochemical impurity of [124I]IUdR was determined at 2.9% by TLC (mainly iodate) and 4.3% by HPLC. The chemical stability of the solvated formulation allowed a time window of 2 days following end of synthesis (EOS) for chemical application, based upon the required 95% radiochemical purity grade of [124I]IUdR. The labelled compound was routinely used for the clinical determination of cell proliferation in glioma patients by positron emission tomography.

Cell Division↗

Influence of ultrasound on mixing on the molecular scale for water and viscous liquids.

Micromixing has a decisive action on the yield of fast reactions such as combustions, polymerizations, neutralizations and precipitations. The aim of this study was to test the possible effect of ultrasound on micromixing, through the phenomenon of acoustic cavitation. To evaluate the local state of micromixing, we used a system of parallel competing reactions involving the Dushman reaction between iodide and iodate, coupled with a neutralization. At first, we studied the effects of the acoustic frequency on micromixing (20-540-1000 kHz). It was found that micromixing through acoustic cavitation and acoustic streaming was more important at 20 kHz than at 540 kHz or 1 MHz. At high and low frequency, it was shown that the injection must be located near the ultrasonic emitter. The influence of the acoustic intensity proved to be predominant mostly for low intensities; for an acoustic intensity of 10 W cm(-2), a characteristic micromixing time of about 0.015 s has been obtained. Viscous media have been studied and experiments showed that micromixing is more difficult to achieve than in aqueous media, but that ultrasound may be as effective as classic stirring.

Journal Article↗

Spectrofluorimetric flow injection determination of trace amounts of periodate.

A sensitive, rapid and selective procedure is proposed for the flow injection determinations of periodate by spectrofluorometric detection. The method is based on the reaction of periodate with Alizarin Navy Blue in basic solution. The reagents and manifold variables influence on the sensitivity have been investigated and the optimum conditions are established. Periodate can be determined for the range of 0.250-5.00 microg ml(-1) with a limit of detection of 0.08 microg ml(-1), and with a sample rate of 15 +/- 2 samples h(-1). The relative standard deviations for eight replicate determination of 0.500 and 5.00 microg ml(-1) was 1.3 and 1.1%, respectively. Periodate can be determined in the presence of iodate and bromate. The proposed method was used to determination of periodate in water samples.

Anthraquinones↗

Electroretinographic evaluation of spectral sensitivity in yellow and silver eels (Anguilla anguilla).

Although differences in visual pigments between developmental stages of the European eel are well known, the expected differences in spectral sensitivity have not been demonstrated at the electrophysiological level. In fact, one past electroretinographic study led to the conclusion that in eels there is no change in scotopic sensitivity, with increasing sexual maturity. In the present experiments, electroretinograms (ERGs) were recorded from in situ eyecups of immobilized eels Anguilla anguilla (L.) caught in coastal running waters. It was shown that the ERG b-wave is as good an indicator of spectral sensitivity as the unmasked late receptor potential (LRP) which directly reflects the responsiveness of photoreceptors. Complete spectral-sensitivity curves, based on b-wave thresholds and on thresholds of LRP subsequently isolated by means of sodium iodate, have been obtained in the same eel. Using fitted amplitude-log intensity functions for threshold calculation, and two models for computer-assisted fitting of spectral-sensitivity curves, significant differences in lambda max were found between yellow and silver developmental stages of the eel, identified by ocular index measurements.

Anguilla↗

The epidemiology of iodine deficiency disorders (IDD) in Yemen.

OBJECTIVE: This first nationwide survey was undertaken to estimate the prevalence rates and severity of iodine deficiency disorders (IDD) and the proportion of households consuming iodized salt. DESIGN: The country was stratified into two ecological zones and 30 clusters (primary schools) from each zone, including the required numbers of pupils, were selected randomly. A subsample of pupils provided urine and salt samples for the determination of urinary iodine excretion (UIE) and presence of iodate, respectively. SETTING: Yemen. SUBJECTS: There were a total of 2984 pupils aged 6-12 years of whom 2003 were boys and 981 girls. The majority (1800) pupils were from the lowland/coastal areas (zone II) and the rest (1184) from the mountainous regions (zone I). RESULTS: The total goitre rates (TGR) in the whole country, zones II and I were 16.8%, 31.1% and 7.4%, respectively. The TGR in zone I for males was 32.8% and 27.3% for females, while in zone II the corresponding rates were 8.1% and 5.9%, respectively, and the differences were not statistically significant. Only three cases of visible goitres were encountered. The median UIE levels in zones I, II and the whole country were 13.6, 18.9 and 17.3 microg dl-1, respectively. Based on UIE cut-off points recommended by WHO, IDD was severe in 4.7% of pupils in zone I and 2.6% in zone II. Mild and moderate IDD were found in 18.5% and 8.7% of the pupils respectively. Nearly 70% of the surveyed pupils had UIE values of >/= 10 microg dl-1 (no deficiency). Girls had relatively better iodine nutrition as suggested by higher levels of median UIE. In addition, across all age groups median UIE values were above 10 microg dl-1. Over half of the households consumed iodized salt. CONCLUSIONS: Since the introduction of universal salt iodization in 1996 both the prevalence and severity of IDD in Yemen were reduced markedly and Yemen can now be classified as a country with a mild IDD problem. However, the low level of households consuming iodized salt may hamper the goal of IDD elimination.

Age Distribution↗

Simultaneous determination of bromide and iodide as acetone derivatives by gas chromatography and electron capture detection in natural waters and biological fluids.

Oxidation of bromide and iodide ions in acidic solutions in the presence of acetone forms the corresponding acetone derivatives. Iodate was reduced with thiosulfate prior to the determination. After extraction with benzene the bromo- and iodoacetone were measured by gas chromatography using electron capture detection. The bromide and iodide contents of rainwater, drinking water, river water, seawater, oil brine, common salt, cow milk, and human blood serum were determined. The relative standard deviations for bromide at 10(-7) M and for iodide at 10(-8) M concentration were 1.9% and 3.0%, respectively, using a 10-mL sample for the determination without preconcentration.

Acetone↗

Improved sensitivity and characterization of high-speed ion chromatography of inorganic anions.

In this work, a reversed-phase monolithic column was permanently coated with didodecyldimethylammonium bromide (DDAB) to perform ultrafast separations of iodate, chloride, nitrite, bromide, nitrate, phosphate, and sulfate in as little as 30 s. Separations were performed using 6 mM o-cyanophenol (pH 7.0) at flow rates up to 10 ml/min and suppressed conductivity detection. Detection limits in the parts-per-billion range were observed for all anions studied (e.g., ranging from 30 ppb for phosphate to 4 ppb for sulfate). The reproducibility was 0.7 and 0.4% RSD for retention time and peak area, respectively. Coated columns were stable for up to 12 h of continuous use at 5 mL/min (i.e., 1-min separations).

Journal Article↗

Latex-coated polymeric monolithic ion-exchange stationary phases. 1. Anion-exchange capillary electrochromatography and in-line sample preconcentration in capillary electrophoresis.

A sulfonated methacrylate monolithic polymer has been synthesized inside fused-silica capillaries of diameters 50-533-microm i.d. and coated with 65-nm-diameter fully functionalized quaternary ammonium latex particles (AS18, Dionex Corp.) to form an anion-exchange stationary phase. This stationary phase was used for ion-exchange capillary electrochromatography of inorganic anions in a 75-microm-i.d. capillary with Tris/perchlorate electrolyte and direct UV detection at 195 nm. Seven inorganic anions (bromide, nitrate, iodide, iodate, bromate, thiocyanate, chromate) could be separated over a period of 90 s, and the elution order indicated that both ion exchange and electrophoresis contributed to the separation mechanism. Separation efficiencies of up to 1.66 x 10(5) plates m(-1) were achieved, and the monoliths were stable under pressures of up to 62 MPa. Another latex-coated monolith in a 250-microm-i.d. capillary was used for in-line preconcentration by coupling it to a separation capillary in which the EOF had been reversed using a coating of either a cationic polymer or cationic latex particles. Several capillary volumes of sample were loaded onto the preconcentration monolith, and the analytes (inorganic anions) were then eluted from the monolith with a transient isotachophoretic gradient before being separated by electrophoresis in the separation capillary. Linear calibration curves were obtained for aqueous mixtures of bromide, nitrite, nitrate, and iodide. Recoveries of all analytes except iodide were reduced significantly when the sample matrix contained high levels of chloride. The preconcentration method was applied to the determination of iodide in open ocean water and provided a limit of detection of 75 pM (9.5 ng/L) calculated at a signal-to-noise ratio of 3. The relative standard deviation for migration time and peak area for iodide were 1.1 and 2.7%, respectively (n = 6). Iodide was eluted as an efficient peak, yielding a separation efficiency of 5.13 x 10(7) plates m(-1). This focusing was reproducible for repeated analyses of seawater.

Journal Article↗

Cathodic detection of H2O2 using iodide-modified gold electrode in alkaline media.

Oxidative chemisorption and cathodic stripping reductive desorption of iodide have been studied at a smooth polycrystalline gold (Au (poly)) electrode. Potential-dependent surface coverage of iodide has been controlled on the basis of its reductive desoprtion in 0.1 M KOH alkaline media and its quantitative oxidation to aqueous iodates in acidic media. The Au (poly) electrode surface catalyzes the decomposition of H2O2 to O2. Specific adsorption of iodide on the Au electrode inhibits fully the catalytic decomposition and electrochemical oxidation of H2O2 as well as the adsorption of unknown impurities and the oxidative degradation of the electrode surface by H2O2. A quantitative characterization/detection of H2O2 at the iodide-modified Au (poly) electrode in the alkaline media has, thus, been achieved. Performance of the electrode toward the detection of H2O2 with respect to response time and sensitivity as well as operational stability has been evaluated. It has a sensitivity of 0.272 mA cm(-2) mM(-1) in amperometric measurements with a detection limit of 1.0 x 10(-5) M H2O2, and the response time to achieve 95% of the steady-state current is <20 s. The effect of O2 in the air-saturated solution can be minimized by subtracting the additional current for the O2 reduction. Experimental measurements were based upon cyclic voltametric and amperometric techniques.

Journal Article↗

Analysis of solids by laser ablation and resonance-enhanced laser-induced plasma spectroscopy

An analytical technique based on resonance-enhanced laser-induced plasma spectroscopy was demonstrated. Pellets of potassium iodate containing trace amounts of sodium were ablated by a 532-nm laser pulse in air. After 30 ns, the plasma plume was intercepted by a 404.4-nm laser pulse to resonantly photoionize the potassium atoms in the vapor plume. The 589-nm emissions of the sodium were found to be significantly enhanced. The enhancement was shown to depend critically on the profile of the 532-nm beam as well as the spatial overlap of the two laser pulses. Using this double-pulse scheme, the mass detection limit for sodium was estimated to be about 200 pg, which was five times better than that obtained by using the 532-nm laser pulse alone.

Journal Article↗

The origin of naturally occurring perchlorate: the role of atmospheric processes.

Perchlorate, an iodide uptake inhibitor, is increasingly being detected in new places and new matrices. Perchlorate contamination has been attributed largelyto the manufacture and use of ammonium perchlorate (the oxidizer in solid fuel rockets) and/or the earlier use of Chilean nitrate as fertilizer (approximately 0.1% perchlorate). However, there are regions such as the southern high plains (Texas Panhandle) where there is no clear historical or current evidence of the extensive presence of rocket fuel or Chilean fertilizer sources. The occurrence of easily measurable concentrations of perchlorate in such places is difficult to understand. In the southern high plains groundwater, perchlorate is better correlated with iodate, known to be of atmospheric origin, compared to any other species. We show that perchlorate is readily formed by a variety of simulated atmospheric processes. For example, it is formed from chloride aerosol by electrical discharge and by exposing aqueous chloride to high concentrations of ozone. We report that perchlorate is present in many rain and snow samples. This strongly suggests that some perchlorate is formed in the atmosphere and a natural perchlorate background of atmospheric origin should exist.

Atmosphere↗

Aqueous reactions of U(VI) at high chloride concentrations: syntheses and structures of new uranyl chloride polymers.

The reactions of UO(3) with acidic aqueous chloride solutions resulted in the formation of two new polymeric U(VI) compounds. Single crystals of Cs(2)[(UO(2))(3)Cl(2)(IO(3))(OH)O(2)].2H(2)O (1) were formed under hydrothermal conditions with HIO(3) and CsCl, and Li(H(2)O)(2)[(UO(2))(2)Cl(3)(O)(H(2)O)] (2) was obtained from acidic LiCl solutions under ambient temperature and pressure. Both compounds contain pentagonal bipyramidal coordination of the uranyl dication, UO(2)(2+). The structure of 1 consists of infinite [(UO(2))(3)Cl(2)(IO(3))(mu(3)-OH)(mu(3)-O)(2)](2-) ribbons that run down the b axis that are formed from edge-sharing pentagonal bipyramidal [UO(6)Cl] and [UO(5)Cl(2)] units. The Cs(+) cations separate the chains from one another and form long ionic contacts with terminal oxygen atoms from iodate ligands, uranyl oxygen atoms, water molecules, and chloride anions. In 2, edge-sharing [UO(3)Cl(4)] and [UO(5)Cl(2)] units build up tetranuclear [(UO(2))(4)(mu-Cl)(6)(mu(3)-O)(2)(H(2)O)(2)](2-) anions that are bridged by chloride to form one-dimensional chains. These chains are connected in a complex network of hydrogen bonds and interactions of uranyl oxygen atoms with Li(+) cations. Crystal data: 1, orthorhombic, space group Pnma, a = 8.2762(4) A, b = 12.4809(6) A, c = 17.1297(8) A, Z = 4; 2, triclinic, space group P1, a = 8.110(1) A, b = 8.621(1) A, c = 8.740(1) A, Z = 2.

Journal Article↗

Dipolar anions are not preferentially attracted to the oil/water interface.

Homogenization of hexadecane in water at pH 9 gives the same surface charge density in the presence of 0.2 mM thiocyanate or acetate anions as in the presence of chloride, indicating that these dipolar anions are not preferentially adsorbed at the oil/water interface. The decrease in the zeta potential of the emulsion droplets as the sodium salts of iodate, thiocyanate, or acetate are added from 0.1 to 10 mM is the same as that when sodium chloride is added, leading to the same conclusion. Increasing the sodium hydroxide concentration from pH 9 to 11.5 has a different effect on the zeta potential, consistent with the specific adsorption of hydroxide ion at the oil/water interface.

Letter↗