Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Wettability”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25Linked to original sources

Exposure of apple thinners to parathion residues.

In studies of potential exposure of a volunteer working under controlled conditions during apple hand-thinning operations at 1, 24, 48, 72, 96, 168, and 240 hr after application of conventional 0.03% parathion spray, both dermal and respiratory exposure values were greater where water-wettable powder formulations were used than where emulsifiables were used. Residue levels of parathion on leaves from the two types of applications were about the same. Only trace amounts of paraoxon could be detected at one and seven days after application. Highest exposure values (14.2 mg/hr dermally and 0.15 mg/hr respiratorily) were obtained within 24 hr of application. Exposure was considerably less after residues were 72 hr old. Greatest exposure was on the forearms and hands. Urinary p-nitrophenol excretion indicated slightly more absorption following exposure in water-wettable powder experimental plots. Potential exposure values indicate that absorption could reach hazardous levels after one or two hr of work, even at the 96-hr residue period, if all the pesticide were absorbed. Considering that only a small fraction of the total amount would be absorbed, it is calculated that at 75-hr residue period poisoning should not occur. There was no significant change in blood cholinesterase activity of the volunteer worker. Variation in spray deposit within an orchard due to poor tank mixing did not appear to be great enough to be considered an important factor affecting exposure.

Administration, Topical↗

Parathion persistence on South African citrus.

The fate of parathion applied to citrus was affected by rain, sun and wind, but not much by fruit variety, while the application method had an important effect. The formulation influenced the persistence of parathion on leaves and glass in the laboratory, but had no influence on the persistence on leaves or fruit in the field. The deposits of the emulsifiable concentrate and of the wettable powder and oil mixture were higher than that of the wettable powder alone, but since the rates of disappearance were the same, higher harvest-time parathion residues on and in the fruit resulted when the first two formulations were used. The time needed to reach a tolerance value increased for applications made later in the growing season.

Citrus↗

Do leaf surface characteristics affect Agrobacterium infection in tea [Camellia sinensis (L.) O Kuntze]?

The host range specificity of Agrobacterium with five tea cultivars and an unrelated species (Artemisia parviflora) having extreme surface characteristics was evaluated in the present study. The degree of Agrobacterium infection in the five cultivars of tea was affected by leaf wetness, micro-morphology and surface chemistry. Wettable leaf surfaces of TV1, Upasi-9 and Kangra jat showed higher rate (75%) of Agrobacterium infection compared to Upasi-10 and ST-449, whereas non-wettable leaves of A. parviflora showed minimum (25%) infection. This indicated that the leaves with glabrous surface having lower q (larger surface area covered by water droplet), higher phenol and wax content were more suitable for Agrobacterium infection. Caffeine fraction of tea promoted Agrobacterium infection even in leaves poor in wax (Upasi-10), whereas caffeine-free wax inhibited both Agrobacterium growth and infection. Thus, study suggests the importance of leaf surface features in influencing the Agrobacterium infection in tea leaf explants. Our study also provides a basis for the screening of a clone/cultivar of a particular species most suitable for Agrobacterium infection the first step in Agrobacterium-mediated genetic transformation.

Caffeine↗

Cell culture on polymers prepared by radiation-induced grafting of various monomers.

The adhesion and growth of tissue cells on polymers prepared by radiation grafting was investigated. The apparent rates of initial attachment and growth of Chang liver and C6 cells were promoted on surfaces with increased wettability and with a heterogeneous structure for grafted polyvinyl fluoride film. The degree of cell attachment and growth on surfaces having a dense microblock structure, formed by grafting of methyl methacrylate in acetone solvent, was greater than that caused by other factors, such as wettability.

Animals↗

Bioleaching of heavy metal-contaminated sediments by indigenous Thiobacillus spp: metal solubilization and sulfur oxidation in the presence of surfactants.

The efficiency of surfactant application to improve or inhibit metal solubilization and sulfur oxidation kinetics during the bioleaching of heavy metal-contaminated sediments was studied in suspension-leaching experiments. The river sediment used contained large amounts of fine particles and organic matter. Three types of surfactants were tested: sodium dodecylsulfate (SDS), a C(12/14)-alkanolethoxylate (Präwozell F1214/5N), and a wettable sulfur (Netzschwefel 80 WP). Adding 10 mmol SDS/l led to transient inhibition of acidification, metal solubilization and sulfur oxidation. Inhibiting bioleaching for just 14 days required about ten times more SDS than the amount used for mine waste mitigation. The use of Präwozell resulted in poor inhibition; and using of wettable sulfur did not improve leaching efficiency. The bulk of these surfactants was sorbed onto the solid particles immediately on application, while the remainder in the aqueous phase disappeared within a few days.

Environmental Pollutants↗

Polymeric meshes for internal sutures with differentiated adhesion on the two sides.

The aim of this work is to investigate the effects of different plasma treatments on ePTFE abdominal prostheses with the final goal of obtaining a new prosthesis, made of a single strand of ePTFE, with clearly differentiated adhesion properties on the two sides, which should be able to promote tissue ingrowth on one side and prevent post surgical visceral adhesions on the other. Samples obtained from ePTFE Bard Dulex Meshes have been treated sequentially with three different gases (N(2), O(2) and NH(3)) in order to choose the optimal treatment conditions to improve ePTFE wettability. In particular, no modification was induced by N(2) treatment, while the full treatment after the final ammonia gas resulted in the best suitable candidate. As demonstrated by scanning electron microscopy, AFM analyses and contact angle measurements, ammonia plasma treatment increases ePTFE surface roughness and renders it more hydrophilic, thus promoting adhesion without any alteration of the material's bulk properties. The reported results also evidence the possibility to obtain the maximum wettability with a cheap treatment by optimizing plasma exposure time. As a preliminary cell adhesion study, Swiss 3T3 fibroblasts (mouse, embryo) have been seeded on the treated and untreated materials in order to assess whether there was any difference in terms of cell attachment and spreading. Cells seeded on the ammonia plasma treated material showed a better adhesion and spreading when compared to the untreated material.

Adhesiveness↗

Osteoblast cell adhesion on a laser modified zirconia based bioceramic.

Due to their attractive mechanical properties, bioinert zirconia bioceramics are frequently used in the high load-bearing sites such as orthopaedic and dental implants, but they are chemically inert and do not naturally form a direct bond with bone and thus do not provide osseointegration. A CO2 laser was used to modify the surface properties with the aim to achieve osseointegration between bioinert zirconia and bone. The surface characterisation revealed that the surface roughness decreased and solidified microstructure occurred after laser treatment. Higher wettability characteristics generated by the CO2 laser treatment was primarily due to the enhancement of the surface energy, particularly the polar component, determined by microstructural changes. An in vitro test using human fetal osteoblast cells (hFOB) revealed that osteoblast cells adhere better on the laser treated sample than the untreated sample. The change in the wettability characteristics could be the main mechanism governing the osteoblast cell adhesion on the YPSZ.

Biocompatible Materials↗

Polyurethanes as potential substrates for sub-retinal retinal pigment epithelial cell transplantation.

Transplantation of cultured retinal pigment epithelial (RPE) cells under the failing macular is a potential treatment for age related macular degeneration. An important step in the development of this procedure is the identification of a suitable membrane on which to grow and transplant the cells. This paper evaluates the potential of using polyurethanes in this application since they possess several of the required properties, such as, flexibility, robustness, biostability and good biocompatiblilty although their hydrophobicity can limit cell adhesion. Three commercially available polyether urethanes (Pellethane, Tecoflex and Zytar) were evaluated in terms of their wettability using dynamic contact angle analysis and their ability to support a monolayer of functioning RPE cells (ARPE-19) . Furthermore Pellethane and Tecoflex were treated with a simple air plasma treatment and analysed as above. In the "as received condition" only a few RPE cells attached to the Pellethane and Tecoflex and remained clumped. RPE cells grew to confluence on the Zytar substrate by 7 days without further surface modification. Air gas plasma treatment of both Pellethane and Tecoflex increased the wettability of the surfaces and this resulted in the growth of a monolayer of well-spread RPE cells on both materials. Morphologically these cells grew with a normal 'cobblestone' phenotype. These results demonstrate the potential of these polyurethanes for this application.

Cell Line↗

Surface characterization of completely degradable composite scaffolds.

The goal of this study was to characterise the surface properties of completely degradable composite, polylactic acid and calcium phosphate glass, scaffolds. The composite scaffolds are made by solvent casting or phase-separation, using chloroform and dioxane as a solvent respectively. The surface properties were measured on composite films which were made using the same procedure as for the three-dimensional (3D) scaffolds without the pore-creating step. The surface morphology, roughness, wettability and protein adsorption capacity of the films was measured before and after sterilisation with ethylene oxide. The results reveal the influence of solvent type, glass weight content and sterilisation on the wettability, surface energy and protein adsorption capacity of the materials. The addition of glass particles increase the hydrophylicity, roughness and protein adsorption capacity of the surface. This effect, however, depends on the extent of the coating of the glass particles by the polymer film, which is much higher for dioxane films than for chloroform films. This information can be used to interpret and understand the biological behaviour of the 3D scaffolds made of this composite materials.

Adsorption↗

Diffusion-in-gel thin layer immunoassay (DIG-TIA): optimal conditions for quantitation of antibodies.

A new technique for the quantitation of antigen-antibody reactions, diffusion-in-gel thin layer immunoassay (DIG-TIA), has been developed. The principle of DIG-TIA is that antibodies are allowed to form a concentration gradient by radial diffusion in an agar gel poured on top of an antigen-coated plastic surface. After removal of the gel and visualisation by means of condensation of water vapour on the plastic surface, the antigen-antibody reactions appear as zones of increased wettability. The concentration of antigen used for coating, pH of the agar, incorporation of Tween 20 in the agar, size of diffusion basins, time of diffusion, and reinforcement by anti-immunoglobulin have been studied with regard to their influence on sensitivity and precision in the detection of antibodies with DIG-TIA. A photographic technique for permanent recording of wettability patterns is also described.

Analysis of Variance↗

Biospecific bimolecular binding reactions - a new ellipsometric method for their detection, quantification and characterization.

A new ellipsometric method for detection, quantification and characterization of bimolecular, specific interactions on solid surfaces, e.g., binding between antigen and antibody and between ligand and receptor, is described. In the method, which we have called diffusion-in-gel (DIG) ellipsometry, one of the binding components is placed in a trough in a gel which has been poured over a solid surface coated with the other binding component. After diffusion, the gel is removed from the surface and ellipsometric measurement of thickness of adsorbed bimolecular layers is performed at different distances from the site of the diffusion trough. Bimolecular binding on the solid surfaces was also studied by wettability determinations with a water condensation technique. Three bimolecular binding systems were studied: bovine serum albumin (BSA)-anti-BSA, ganglioside GM1-cholera toxin, and C-polysaccharide-C-reactive protein. There was no tendency to saturation in the anti-BSA adsorption profile, which was steep with an endpoint thickness of about 16 nm. In contrast, the cholera toxin profile, within a narrow concentration range, rose to a plateau level of about 3 nm thickness of adsorbed cholera toxin. The C-reactive protein profile formed an intermediate pattern. Good agreement was observed between the thickness of the adsorbed ligand layers and wettability as determined by water condensation. Compared with other methods, the DIG ellipsometry technique has several theoretical and practical advantages for the detection and investigation of biospecific bimolecular binding.

Adsorption↗

The contact angle induced by DPL at pulmonary epithelial surfaces.

A contact angle has been measured at the surface of dog tracheal epithelium by means of two surface balances simultaneously monitoring the apparent surface tension of the same film in a Langmuir trough - one method dependent upon contact angle and the other independent of contact angle. This was confirmed by direct observation. The contact angle was absent for Ringer's solution alone but was induced by DPL deposited on the fluid surface in physiological concentrations. The contact angle varied from 9 degrees to 67 degrees for compression of the DPL film from 100% to 27.5% of its original area and displayed hysteresis with respect to area. These findings show that DPL has unusual surface properties in reducing surface tension yet decreasing wettability, i.e. acting as an anti-wetting agent. The physiological advantages of this unusual combination of properties are discussed in relation to maintaining pulmonary homeostasis and the forward propulsion of mucus which could be facilitated by the differential wettability of cilia induced by DPL. One possible disadvantage of DPL is indicated where fluid plugs might seal an airway - such as in the newborn.

Animals↗

The fate of dienochlor administered orally and dermally to rats.

Within four days of receiving a single oral dose (1 mg/kg) of [U-ring-14C]dienochlor [bis(pentachloro-2,4-cyclopentadien-1-yl)] female rats excreted 2 and 88% of the applied 14C in urine and feces, respectively. Metabolites could not be identified and the preponderance of the fecal radioactivity consisted of unextractable 14C-labeled residues. Within 1 day virtually all of the dienochlor had been degraded by rats, with only traces of parent dienochlor in excreta and tissues. After four days only 2% of the applied dose remained in tissues (mainly kidney, liver, and gastrointestinal tract). Pharmacokinetic studies with blood plasma and bile showed dienochlor (and/or its metabolites) to be poorly absorbed. Rats were exposed dermally for 24 hr to [14C]dienochlor formulated as Pentac WP miticide both as an aqueous suspension and as an undiluted wettable powder. Half of the dose adhered to the skin and the other half was found in gauze patches used to protect the treated skin. After a 24-hr exposure over 60% of the radiolabel that adhered to skin was removed by washing with an aqueous soap solution and 86% of this rinsing solution was unmetabolized dienochlor. The dienochlor and its metabolites were transported inefficiently from the application site; only 1% of the applied dose was detected in urine plus feces and less than or equal to 0.2% in tissues. With application rates that simulate field exposure by humans, the actual residue of dienochlor and metabolites in skin (i.e., not removable by washing) is about thirteen times higher following exposure to dienochlor as undiluted wettable powder than as an aqueous suspension.

Administration, Oral↗

Properties of extruded poly(tetramethylene oxide)-polyurethane block copolymers for blood-contacting applications.

The bulk and surface properties and blood compatibility of a series of polyurethanes based on methylene bis(p-phenyl isocyanate), 1,4-butanediol, and poly(tetramethylene oxide) of molecular weight 1000 were studied. The hard-to-soft segment ratio of these multiphase polymers was varied, and the effect of substituting a poly(dimethylsiloxane)-containing polyol in place of 5% of the polyether soft segment was studied. Bulk properties such as tensile strength and modulus increased with hard segment content, as did surface wettability and ESCA nitrogen content. However, blood compatibility measured by a canine ex vivo blood-contacting experiment was not found to vary with hard/soft segment ratio. The addition of the silicone-containing polyol did not significantly lower the surface wettability, although ESCA-measured silicon content increased and physical properties were unfavourably affected by the incorporation of this co-soft segment. Incorporation of the siloxane-containing component resulted in increased platelet adhesion and fibrinogen deposition at most blood contact times in comparison with the other polyurethanes.

Animals↗

Electrically charged polymeric substrates enhance nerve fibre outgrowth in vitro.

The physical, chemical and electrical properties of synthetic guidance devices are known to influence nerve regeneration in vivo. In the present study, neurons were cultured directly on electrically charged polymer growth substrates to determine if local electrical charges enhance nerve fibre outgrowth in vitro. Piezoelectric polymers such as polyvinylidene fluoride (PVDF) generate transient surface charges under minute mechanical strain. Mouse neuroblastoma (Nb2a) cells were cultured directly on electrically poled (i.e. piezoelectric) and unpoled (i.e. nonpiezoelectric) PVDF substrates in serum-free and serum-containing media. Nerve fibre outgrowth was analysed 24, 48, 72 and 96 h after plating. Piezoelectric PVDF substrates generated 2-3 mV at 1200 Hz when placed on standard incubator shelves and unpoled PVDF substrates showed no output. Nb2a cells grown on piezoelectric substrates exhibited significantly greater levels of process outgrowth and neurite lengths at all time periods for both media conditions. Detailed surface characterization of PVDF substrates using electron spectroscopy for chemical analysis (ESCA) and a comprehensive wettability profile revealed that poled and unpoled PVDF was chemically indistinguishable and showed similar surface wettabilities and adhesive properties. Therefore, we conclude that enhanced process outgrowth was induced by the film's piezoelectric output, making poled PVDF a unique biomaterial for which cell/polymer interactions are mediated predominantly through bulk electrical properties rather than surface properties.

Animals↗

Regional variation in surface properties of Norway spruce and scots pine needles in relation to forest decline.

Measurements of leaf wettability (contact angle), amounts of epicuticular wax and of surface dust are reported for Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L) Karst) trees growing at 12 sites in Europe from SW Germany to NE Scotland. At each site, three year classes (current year, 1 and 2-year-old) of needles were sampled from the mid-crown of up to 12 trees. Trees were selected at random from two strata, those showing visible decline symptoms (i.e. loss of needles or discoloration) and those apparently healthy. Needles for analysis were taken from apparently healthy (green) shoots in both cases. There were no significant differences between 'declining' and 'healthy' trees within sites, suggesting that leaf surface properties reflect environmental exposure rather than plant response. There were significant differences between sites, particularly for Norway spruce, which may be related to environmental factors including air pollution. Contact angles were consistently smaller at low-altitude sites in Britain and The Netherlands than at high-altitude sites in Germany where forests show decline symptoms. Leaf wettability decreased (contact angles increased) with wax amount and increased with dust amount. Leaf surface properties integrate environmental influences over long periods, and may be useful in identifying sites 'at risk' of developing decline symptoms, but causal relationships cannot be deduced without further direct experimentation.

Journal Article↗

Scots pine needle surfaces on radial transects across the north boreal area of Finnish Lapland and the Kola Peninsula of Russia.

To gain an understanding of the characteristics of the needle surfaces of naturally regenerated Scots pine (Pinus sylvestris L.) and their geographical distribution, eight physicochemical variables were investigated within the north boreal forest area. The visibly undamaged needles were collected in autumn 1990 from 114 plots (3-5 pines per plot) along radial transects from the Monchegorsk and Nikel smelters, emitting SO2 and heavy metals, on the Kola Peninsula, Russia, to Finnish Lapland. The needles were examined by scanning electron microscopy (SEM) and measured for surface wettability using the droplet contact angle (DCA) method. Significant geographical south-north and west-east patterns could be observed in needle surface characteristics, correlating with emissions from the smelters and to climate. Despite the slightly higher initial DCAs (61.4-87.6 degrees) towards the north, the pine needle surfaces of the northernmost transects exhibited higher annual needle wettability change (ANWC) and wax erosion rate (AWER), expressed as the reduction in DCAs and epistomatal wax tube distribution (WTD) during one year, respectively, but a lower occurrence of particles and fungal hyphae than those of more southern transects. The higher ANWC was related to higher atmospheric SO2 concentration, and to the lower long-term temperature sum, but not clearly to annual precipitation. In the Monchegorsk smelter area, the current needles exhibited, on average, a 15% higher WTD and seven degree larger DCA, resulting in more hydrophobic needle surfaces than in Finnish Lapland, but during their first year, both the AWER and ANWC, were greatly increased. In Finnish Lapland, 30%, of all the epistomatal wax tubes disappeared from the needle surface during the first year, the value being 70% for the pines located 8 km from the smelter. The mineral composition of the particles deposited on the needle surfaces mirrored that of the minerals being produced by the smelters (e.g. FexSx, CuFeS2, NixSx, FexOx). Stomatal densities were in the range of 71.1-141.7 stomata mm(-2). The lower densities of stomata on needles close to the smelters correlated with reduced number of needle age classes of the pines, higher dry weights, higher pollutant accumulation and lower Mn and Zn concentrations in the needles. The AWER and ANWC were able to indicate the most seriously deteriorated needle surfaces on a regional scale, e.g. including the surroundings of both smelters, although the plot-specific relationships between 'needle surface variables' and 'pollution variables' were generally weak. The present study showed that the exposure of pine needles to the combined effects of ambient pollutants and harsh climate led to a deterioration in the physicochemical characteristics of the epicuticular wax, which may have serious ecophysiological consequences in the long term.

Journal Article↗

Energetics of corneal epithelial cell-ocular mucus-tear film interactions: some surface-chemical pathways of corneal defense.

The role of ocular mucous gel in the corneal epithelial hydration, lubrication, cleansing, wettability and defense against pathogens, is investigated based on a modified DLVO theory that accounts for the apolar, as well as polar, "acid-base" surface interactions. A strong polar repulsion keeps mucus in the form of highly hydrated "sloppy" gel, which does not adhere to the normal epithelium. Due to its strong electron donor type monopolarity, the mucus gel can form an effective barrier against contamination of the underlying epithelium by both the apolar (e.g., tear film lipids, cell debris) and the polar (e.g., hydrophilic bacteria) entities. In the absence of mucus, epithelial contamination becomes energetically favorable, which can also compromise its wettability by tears. Finally, a loss of polar surface properties can lead to adhesion of mucus to the cornea.

Adhesiveness↗