Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Prosthesis Fitting”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25Linked to original sources
PubMed1996

Fitting characteristics of 1-day and 14-day Acuvue disposable contact lenses.

The fitting characteristics of 1-day Acuvue disposable soft contact lenses (SCLs) [base curve (BC) 9.0 mm, diameter 14.2 mm] and 14-day Acuvue disposable SCLa (BC 8.8 mm, diameter 14.0 mm) were evaluated and compared with respect to lens centration and post-blink movement in primary gaze and in upgaze. In this double-blind study 25 successful daily wearers of either the 1-day lens or the 14-day lens with the same parameters were randomly fit with three 1-day lenses and three 14-day lenses for a total of 6 lenses per eye. The lene fit was evaluated 5 min after insertion. Lens centration was assessed by measuring temporal, nasal, superior and inferior limbal coverage, and then comparing the net horizontal centration (temporal minus nasal coverage) and the net vertical centration (superior minus inferior coverage) of the 1-day and 14-day lenses. There was no significant difference between the two lenses in terms of temporal, superior, and inferior limbal coverage (p > 0.05). However, the 1-day lens showed statistically more nasal coverage (p < 0.05). No statistically significant difference in movement or in horizontal and vertical differences in centration were found (p > 0.05). Although our findings indicate a subtle statistical difference in fitting characteristics, clinically the two lenses should provide similar fits.

Adult↗
PubMed1997

Instantaneous centers of rotation in dorsi/plantar flexion movements of posterior-type plastic ankle-foot orthoses.

Hingeless plastic ankle-foot orthoses (PAFOs) achieve ankle motion by flexing about the ankle joint. Instantaneous centers of rotation (ICRs) in dorsi- and plantarflexion movements, used as a measure of PAFO axes of movement, were measured to evaluate their fit to ankle motion. Thirty different PAFOs were fabricated and their stiffness modified in three stages. They were dorsi- and plantarflexed 16 degrees at 2 degrees-intervals using an original device. Displacement of two marks on the lateral calf-cuff were traced photographically, and ICRs were determined by plotting intersections of vertical bisectors for each displacement. The ICRs converged on the junction between the calf shell and the shoe insert. They deviated posteriorly from the anatomical ankle axis and caused the calf-cuff to move up-down during dorsi- and plantarflexion movements. However, this poor fit of the PAFO to ankle motion can be sufficiently compensated for by fastening straps more loosely.

Adult↗
PubMed2000

Clinical fit of Procera AllCeram crowns.

STATEMENT OF PROBLEM: Color stability, strength, and accuracy of fit are the main requirements for complete-ceramic crowns. The Procera AllCeram crown system is a CAD/CAM system used to fabricate individual complete-ceramic crowns that have a dry sintered, aluminum oxide core and appear to match clinical requirements. However, there are few articles about the clinical fit of all-ceramic crowns. PURPOSE: This in vivo study measured the accuracy of fit of Procera AllCeram crowns in anterior and posterior teeth. MATERIAL AND METHODS: The clinical fit of 80 anterior and posterior Procera AllCeram crowns was evaluated by a replica technique with a light body silicone to fill space between crown and tooth and a heavy body silicone to stabilize the light body film. After removal from the artificial crowns, the replicas were segmented, and measurements of the film thickness were performed with a light microscope. RESULTS: Medians of mean marginal gap widths were between 80 and 95 microm in anterior teeth and between 90 and 145 microm in posterior teeth. Medians of maximal marginal gap widths ranged from 80 to 180 microm in anterior teeth and from 115 to 245 microm in posterior teeth. CONCLUSION: The accuracy of fit achieved by Procera AllCeram was comparable to other conventional and innovative systems.

Adult↗
PubMed2005

Comparison of two adaptive procedures for fitting a multi-channel compression hearing aid.

We compared two adaptive procedures for fitting a multi-channel compression hearing aid. "Camadapt" uses judgements of the loudness of speech stimuli and the tonal quality of music stimuli. "Eartuner" uses judgements of the loudness and clarity of speech stimuli with differing spectral characteristics. Sixteen new users of hearing aids were fitted unilaterally, using each procedure. The fittings were assigned to Programs 1 and 2 in the aid, in a counter-balanced order. Subjects kept a diary of their experiences with each program in everyday life. Following 2-4 weeks of experience, they filled in the APHAB and other questionnaires and were re-fitted using both procedures. Camadapt generally led to higher low-level gains and lower high-level gains than Eartuner. Gains recommended by the procedures did not change following experience. Eight subjects preferred the Camadapt fitting and eight preferred the Eartuner fitting. Most subjects gave high overall satisfaction ratings for both procedures. Test-retest reliability was better for Eartuner than for Camadapt. Preference for the Camadapt fitting was associated with slightly better speech communication with Camadapt, while preference for the Eartuner fitting was associated with fewer problems with aversion for that procedure.

Acoustic Stimulation↗
PubMed1999

Contact lens management of patients who have had unsuccessful refractive surgery.

The advent of corneal refractive surgery has, inevitably, resulted in the occasional need for contact lens fitting after surgery. For each new, developing procedure, new contact lens fitting challenges arise. The literature on contact lens use after radial keratotomy is rich and well known, but reports on the use of contact lenses after photorefractive keratectomy or laser-assisted in situ keratomileusis are few and far between. This review summarizes the prevailing clinical opinions on the contact lenses and contact lens fitting methods that are most effective after refractive surgery that results in high refractive error, irregular astigmatism, or anisometropia.

Anisometropia↗
PubMed2001

Aphakic hydrogel contact lens fitting on a monocular canine: a case report.

BACKGROUND: Though plano bandage contact lenses used for therapeutic purposes are not uncommon for dogs, no literature regarding contact lenses to correct aphakic canines currently exists. CASE REPORT: Oliver, a 7-year-old terrier mix, was aphakic in his left eye and essentially blind in his right eye as the result of a large retinal detachment. Surgical complications and endothelium damage contraindicated an intraocular lens implant in his left eye. While co-managed with his veterinary ophthalmologist, Oliver was prescribed an aphakic hydrogel contact lens to improve his monocular vision. CONCLUSION: Oliver was successful (by clinical criteria) with his contact lens. Although it is difficult to quantify his vision without a visual evoked potential, Oliver appeared more attentive and confident with the contact lens. This case report demonstrates a successful canine aphakic contact lens fit through the efforts of his owners, co-managing veterinary ophthalmologist, and optometrist.

Animals↗
PubMed2001

Can maximum comfortable loudness levels in hearing impaired listeners be predicted from ipsilateral acoustic reflex thresholds recorded with high frequency probes?

This study was designed to test the effectiveness of the ipsilateral acoustic reflex thresholds measured with low and high frequency probes in predicting the maximum comfortable loudness levels (MaxCLs) in hearing-impaired subjects using recently available sophisticated procedures for acoustic reflex and loudness measures. Loudness growth functions were measured in hearing-impaired subjects at .5, 1 and 2 kHz using a computerized procedure. The maximum level among those sound pressure levels judged as 'comfortable' was designated as the MaxCL. Acoustic reflex thresholds were measured for .5, 1 and 2 kHz activator signals using 226, 678 and 1000 Hz probes. Regression analyses suggested that acoustic reflex thresholds recorded with the 678 and 1000 Hz probes could provide an objective estimate of the MaxCLs for 1 and 2 kHz. Thus, acoustic reflex thresholds may be useful in fitting hearing aids for those subjects in whom reliable measures of MaxCLs cannot be obtained.

Adult↗
PubMed1994

Clinical evaluation of a computerized topography software method for fitting rigid gas permeable contact lenses.

Computerized videokeratoscope software programs now have the ability to assist in the design of rigid gas permeable (RGP) contact lenses and simulate fluorescein patterns. We evaluated the performance of Computed Anatomy's Topographic Modeling System (TMS-1) and its Contact Lens Fitting Program (version 1.41) in fitting RGP lenses in 31 subjects. Computerized topographic analysis, balanced manifest refraction, slit lamp examination, and keratometry were performed. Initial lens parameters were ordered according to manufacturer's programmed recommendations for base curve, power, lens diameter, optic zone diameter, and edge lift. Final lens parameters were based on clinical performance. Lenses were recorded for base curve changes of 0.1 mm or more, power alterations of +/- 0.50 D or more, or for any alteration in diameter/optic zone. Twenty-seven patients were analyzed for all five recommended parameters. Thirteen of 27 patients (48%) required no parameter changes. Nine of 27 patients (33%) required one parameter change, four of 27 patients (15%) required two parameter changes, and one patient (4%) needed three parameters altered. The most prevalent change was a power alteration, required in nine of 27 patients (33%); however, comparisons of all initial to final parameters showed no statistically significant differences. Comparison of initial base curves to that which would have been chosen via standard keratometry also showed no significant difference. This study found the TMS-1 default lens recommendations to be clinically unacceptable. This system, however, could be an alternative method of initial lens selection if used to titrate a fit or if software enhancements are incorporated to account for lens movement and flexure.

Astigmatism↗
PubMed1998

The functionally and physiologically plastic adult auditory system.

The potential for functional and underlying physiological change in the adult auditory system is examined through review and evaluation of several sets of literature including auditory deprivation and recovery, auditory learning after hearing aid fitting, auditory abilities of normal listeners exposed to masking noise, and neural plasticity in the sensory and motor systems of animals. This tutorial review is meant for the reader who may be interested in auditory learning and who would like to have a summary and evaluation of the various findings to date. The focus of the review is the effect that various findings of auditory learning may have on hearing aid fitting and selection.

Adult↗
PubMedDate not supplied

Precision of CNC-milled titanium frameworks for implant treatment in the edentulous jaw.

PURPOSE: The purpose of this report was to describe a new technique to fabricate one-piece, implant-supported titanium frameworks by means of a computer numeric-controlled (CNC) milling technique, and to compare the fit of these frameworks with conventional cast prostheses. MATERIALS AND METHODS: The study comprised 20 patients who were provided with 5 standard Brånemark implants each in the edentulous mandible. The fit of the first 10 prostheses with CNC-milled frameworks was measured by means of a 3-dimensional photogrammetric technique. The distortion of the center point of the framework cylinders was measured in relation to the master cast replicas. These measurements were compared with 10 randomly selected routine prostheses with cast frameworks. RESULTS: No significant differences were found between the 2 groups. The 3-dimensional distortion of the cylinders in the completed prostheses ranged from 3 to 80 microns; no passive framework was observed. More distortion was observed in the horizontal plane (x and y axes) as compared to the distortion in the vertical direction (z axis). CONCLUSION: The precision of fit of the first CNC-milled prostheses presented a comparable fit to the conventional cast frameworks. Consequently, this new technique could be a valid option for the routine fabrication of frameworks for implant prostheses.

Computer-Aided Design↗
PubMed1961

Contact lenses. The ophthalmologist's role in prescription.

It is the responsibility of ophthalmologists to determine which patients can suitably use contact lenses, to instruct them in care and use of the lenses, to write the prescription and to check the fitting, vision and tolerance of the eyes to avoid injury. This very important component of eye care should not be given over to nonmedical technicians by default.

Contact Lenses↗
PubMed2001

Comparison of three procedures for initial fitting of compression hearing aids. I. Experienced users, fitted bilaterally.

We compared the effectiveness of three procedures for the initial fitting of hearing aids with multi-band compression: (1) CAMEQ, which aims to amplify speech so as to give equal loudness per critical band over the frequency range important for speech intelligibility, and to give similar overall loudness to 'normal': (2) CAMREST, which aims to amplify speech so as to restore 'normal' specific loudness patterns, over a wide range of speech levels; (3) DSL I/O, which aims to map the dynamic range of normally hearing people into the reduced dynamic range of hearing-impaired people, with 'full' restoration of audibility. Ten experienced hearing aid users with moderate sensorineural loss were fitted bilaterally with Danalogic 163D digital hearing aids, using each procedure in turn; the order was counterbalanced across subjects. The fitting required specification of gains for input levels of 55 and 80 dB SPL at six centre frequencies. Real-ear measurements were made to ensure that target gains were reached (+/-3 dB). Immediately after fitting with a given procedure, and one week after fitting, the gains were adjusted when required by the minimum amount necessary to achieve acceptable fittings. The amount of adjustment required provides one measure of the adequacy of the initial fitting. On average, the adjustments were smallest for the CAMEQ procedure. The gain changes were slightly larger for the CAMREST procedure and were largest of all for DSL I/O. For the latter, the gain changes were mostly negative, especially for high frequencies and the higher input level. This indicates that the DSL I/O procedure prescribes more high-frequency gain than is preferred by adult users. After these gain adjustments, users wore the aids for at least three weeks before filling out the APHAB questionnaire and taking part in laboratory measurements of the speech reception threshold (SRT) for sentences in quiet and in steady and fluctuating background noise at levels of 60 and 75 dB SPL. Following these tests, the hearing aids were re-fitted with the next procedure. The scores on the APHAB test and the SRTs did not differ significantly for the three procedures. We conclude that the CAMEQ and CAMREST procedures provide more appropriate initial fittings than DSL I/O.

Acoustic Stimulation↗
PubMed2001

A study of the application of a frequency transposition hearing system in children.

The aim of this retrospective study was to investigate the use of the frequency transposition Transonic FT 40 system in a group of 36 children with profound sensorineural hearing loss. The group comprised 36 children (11 boys, 25 girls) aged between 2.8 and 15.6 years (mean 7.6 years) at fitting of the FT 40 device. At 48 months post-FT 40 fitting, only 11 children (30%) were still wearing the device. The children discontinued wearing the FT 40 for the following reasons: ergonomic (11%); no perceived benefit from the system (11%); cosmetic (17%); and subsequent cochlear implantation (30%). The performance of the long-term FT 40 users was investigated using the following outcome measures: aided soundfield hearing thresholds: closed set speech tests (the E2L toy test and the Manchester Picture Test discrimination test) and a speech intelligibility rating score. The 11 long-term FT 40 users (three boys, eight girls) were aged from 5.3 to 12.9 years (mean 7.2 years) at the time of initial fitting of the FT 40 device. At time of fitting, the aided soundfield thresholds with the FT 40 were significantly better at 500 Hz (p<0.04), 1 kHz (p<0.019), 2 kHz (p<0.001) and 4 kHz (p <0.001) compared to thresholds with conventional hearing aids. Six of 11 children did not show any change in performance on the closed set speech tests and two children had intelligible speech at 48 months' follow-up. A small subgroup of good performers was identified. These children were younger at age of fitting (mean 6.2 years compared to a mean of 7.7 years for the remainder of the group), were predominantly oral communicators and had identified aetiologies for their deafness. The present study suggests that there is a small subgroup of hearing-impaired children who benefit from frequency transposition hearing systems, and future suggested fitting criteria and outcome measures are listed.

Acoustic Stimulation↗
PubMed2000

Effect of earmold fit on predicted real ear SPL using a real ear to coupler difference procedure.

OBJECTIVES: The goal of Experiment I was to quantify the SPL entering the ear canal via a secondary pathway created by a vent in the earmold and/or a slit leak around the earmold. The goal of Experiment II was to determine the validity of a real ear to coupler difference (RECD) procedure under conditions that are likely to produce errors (e.g., when hearing aid gain in the low frequencies is minimal and large negative RECD values occur as a result of venting or a loosely fitting earmold). DESIGN: In Experiment I, the SPL entering the ear via the secondary pathway was measured in 61 hearing-impaired children and 13 normal-hearing adults. In Experiment II, traditional probe microphone measures of real ear SPL were compared to the SPL predicted using the RECD procedure in five normal-hearing adults with loosely fitting earmolds. RESULTS: Results of Experiment I indicated that sound entered the ear canal unattenuated at 250 and 500 Hz, regardless of earmold fit, vent size, or subject age. In Experiment II, the largest differences between traditional probe microphone measures of SPL and predicted measures were noted when hearing aid gain was 0 dB and large negative RECD values were present. When hearing aid gain was minimal and the RECD was in the -10 to -22 dB range, predicted values underestimated the real ear SPL by an average of 14 dB. CONCLUSIONS: Although the results of this study apply only to a limited range of conditions found in clinical practice, in those cases, the errors may influence clinical decisions about the type of hearing aid fitted and the amount of gain provided. Potential solutions to this problem are discussed.

Adult↗
PubMed1996

The Periotest method: implant-supported framework precision of fit evaluation.

PURPOSE: In this study, the Periotest instrument was used to measure the precision of fit between cast high noble-metal frameworks and the supporting implants in a patient-simulation model. Three framework conditions and three implant-location variables were used to evaluate the rigidity of the assembly as measured by the Periotest method. The framework variables were (1) one-piece castings (OPC); (2) sectioned-soldered inaccurate castings (SSIC); and (3) sectioned-soldered accurate castings (SSAC). The implant-location variables were right anterior (RA), center (C), and left anterior (LA). MATERIALS AND METHODS: The patient simulation model used consisted of three self-tapping Branemark implants in a reasonable arch curvature in bovine bone. Three working casts were fabricated from the patient-simulation model using polyvinyl siloxane and tapered impression copings. From the working casts, three sets of three frameworks were fabricated as OPCs, SSICs, and SSACs using type 3 high noble alloy. The SSICs were fabricated with a quantitative misfit of 101.6 microns at the facial surface, between the abutment-to-gold cylinder interface at the C implant location. Periotest value (PTV) measurements were made at the midfacial surface of the frameworks directly above each abutment-to-gold cylinder interface. Three measurements were made for each test condition. The data were analyzed to compare framework condition(s) and implant location(s) using ANOVA and Fisher's Protected Least Significant Difference Comparison Test. RESULTS: The ANOVA showed that significant differences exist between the mean PTV data for framework condition and for implant location (p < .01). Significant differences were shown between the mean PTV data for the SSAC assemblies and the OPC and SSIC assemblies. The SSICs displayed a more positive (+) mean PTV than the OPCs. The OPC assemblies had a more positive mean PTV than the SSAC assemblies. The mean PTV data for the SSAC assemblies had a significantly different PTV (p < .01) than the other two framework condition assemblies. The OPC and the SSIC assemblies had PTVs that were not significantly different. The C implant location was significantly different from the RA and the LA implant locations (p < .01). The RA and the LA implant locations were not significantly different from each other. The C implant location always demonstrated the most positive mean PTV regardless of the framework condition being tested. CONCLUSIONS: The Periotest instrument quantified differences in the precision of fit between three framework conditions. The SSAC assemblies were significantly more rigid than the OPC and SSIC assemblies. The OPC and SSIC assemblies' mean PTVs were not significantly different. The mean PTVs for the C implant location and the RA and LA implant locations were significantly different (p < .01). The mean PTVs of the RA and LA implant locations were not significantly different. The implant-location PTVs followed the same rank order for all three framework conditions. The procedures used to fabricate a more precise fit between the framework and the supporting implants is influenced by the skill of the clinician and technician.

Analysis of Variance↗
PubMed1999

[Primary stability of press-fit acetabulum cups using a new acetabulum reamer].

The aim of the present study was to assess the initial stability of uncemented press-fit acetabular components using a newly developed reamer designed to optimize the surgical preparation of the acetabulum. Ten synthetic human pelves were used to investigate the stability of 20 uncemented press-fit acetabular components, each of which was tested in a servohydraulic testing machine for 6 cycles under an axial load of 2.4 kN. The results of the micrometric measurements revealed satisfactory stability for a reaming depth of 2 mm, and a press-fit of 2 mm. Micromotion was less than 200 microns in all the anatomical sections of the acetabulum (ischium 63 microns, pubis 150 microns, ilium 85 microns). A press-fit of 4 mm and the smaller reaming depth of 1 mm were associated with a substantial decrease in mechanical stability.

Acetabulum↗
PubMed2001

Rigid gas-permeable contact lens fitting in LASIK patients for the correction of multifocal corneas.

BACKGROUND: Laser in situ keratomileusis (LASIK) has recently become the most commonly performed refractive surgery procedure. Results are promising in correcting low to moderate myopia. Most complications occur during the surgeon's learning curve. One of the complications is a decentration of the ablated area that causes monocular diplopia and a nocturnal halo phenomenon due to a multifocality of the corneal surface overlying the entrance pupil. The corneal shape is significantly altered after LASIK. We evaluate the efficacy of rigid gas-permeable contact lens designs and fitting techniques used in eight eyes with multifocal LASIK ablations to correct haloes and impaired night vision complaints. METHODS: We used large-diameter tetra-curved rigid gas-permeable (RGP) contact lenses for visual recovery in eight eyes of seven LASIK patients. We used the power on the transition zone of the corneal topographic map, 0.2 mm outside the ablated refractive area, for selection of the back optic zone radius of the RGP contact lenses. Procedures for lens fitting are described. Visual acuity (high-contrast logarithm of the minimum angle of resolution, LogMAR) was measured before- and 6 months after contact lens fitting. RESULTS: Large-diameter tetra-curve RGP lenses with a mean diameter of 11.85 (SD 0.16) mm were successfully used in LASIK patients with multifocal corneas. Mean best spectacle-corrected visual acuity was +0.3 LogMAR (SD 0.19; in Snellen equivalent, 20/40) and improved significantly with the contact lenses to +0.08 LogMAR (SD 0.11; in Snellen equivalent, 20/25, P=<0.01). During the follow-up period of 16.7 months, the average daily wearing time of the lenses was 12.5 h. Contact lenses with a standard geometry were not useful due to excessive movement and inadequate centration. CONCLUSIONS: Contact lenses with large diameters, in combination with selection of the back optic zone radius 0.2 mm peripheral of the refractive ablation zone, facilitate contact lens fitting to restore best-corrected visual acuity in LASIK patients with multifocal corneas.

Adult↗
PubMed2002

Postoperative management and follow-up after corneal flap loss following laser in situ keratomileusis.

We present 3 cases of flap loss within 2 weeks of unilateral laser in situ keratomileusis. In all patients, spontaneous regeneration of the epithelial layer, covering the ablated stroma, was expected. In 2 patients, the best spectacle-corrected visual acuity recovered to 20/25 within 6 months and in 1 patient, a contact lens was fitted 6 months after the accident, restoring visual acuity to 20/25. The 6-month follow-up and the contact lens fitting technique are described.

Adult↗