Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Magnesium Compounds”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25Linked to original sources
PubMed2005

First insight into catalytic activity of anionic iron porphyrins immobilized on exfoliated layered double hydroxides.

Mg-Al layered double hydroxide (LDH) intercalated with glycinate anions was synthesized through co-precipitation and exfoliated in formamide and the single-layer suspension was reacted with aqueous iron porphyrin solutions (Fe(TDFSPP) and Fe(TCFSPP)). The obtained materials were characterized by X-ray powder diffraction, UV-vis, and electron paramagnetic resonance and investigated in the oxidation reaction of cyclooctene and cyclohexane using iodosylbenzene as oxidant. The iron porphyrin seems to be immobilized at the surface of the glycinate intercalated LDH. The catalytic activities obtained in heterogeneous media for iron porphyrin, Fe(TDFSPP), was superior to the results obtained under homogeneous conditions, but the opposite effect was observed on the Fe(TCFSPP), indicating that, instead of the structural similarity of both iron porphyrins (second-generation porphyrins), the immobilization of each one produced different catalysts. The best catalytic activity of the Fe(TDFSPP)/Gly-LDH, compared to Fe(TCFSPP)/Gly-LDH, can be explained by the easy access of the oxidant and the substrate to the catalytic sites in the former, probably located at the surface of the layered double hydroxide pillared with glycinate anions. A model for the immobilization and a mechanism for the oxidation reaction will be discussed.

Aluminum Hydroxide↗
PubMed2006

Removal of phenol from aqueous solution by adsorption onto OTMAC-modified attapulgite.

The potential of octodecyl trimethyl ammonium chloride (OTMAC)-modified attapulgite (AT) for phenol adsorption from aqueous solutions was studied. The comparison of natural AT and modified AT showed that it is possible to utilize the sonication-modified OTMAC-AT in the treatment of phenol-contaminated wastewaters. Batch sorption studies were carried out to evaluate the effect of contact time, shaking frequency, temperature and the amount of AT. The results showed that in a lab-scale reactor, at room temperature, with an amount of the modified AT added (2.5 g), and a shaking frequency of 140 rev/min, the adsorption rate of phenol could be 60.4% for a duration of 60 min. The sorption kinetics were described by a pseudo-second-order model, and the values of k and q(e) were 1.367 mg/ig min and 0.7901 ig/mg, respectively. The analysis of equilibrium data showed that the Freundlich isotherms were found to be applicable for the adsorption equilibrium data. K and 1/n were estimated to be 14.53 and 0.8438, respectively.

Adsorption↗
PubMed2004

Reactions of sulphur mustard on impregnated carbons.

Activated carbon of surface area 1100 m2/gm is impregnated with 4% sodium hydroxide plus 3% Cr(VI) as CrO3 with and without 5% ethylene diamine (EDA), 4% magnesium nitrate and 5% ruthenium chloride by using their aqueous solutions. These carbons are characterized for surface area analysis by BET conventional method and exposed to the vapours of sulphur mustard (HD) at room temperature (30 degrees C). After 24 h, the reaction products are extracted in dichloromethane and analyzed using gas chromatography and mass spectrometry (GC-MS). Hemisulphur mustard, thiodiglycol, 1,4-oxathiane are observed to be the products of reaction between sulphur mustard and NaOH/CrO3/C system, whereas on NaOH/CrO3/EDA/C system HD reacted to give 1,4-thiazane. On Mg(NO3)2/C system it gave hemisulphur mustard and thiodiglycol. On RuCl3/C system it degraded to divinyl sulphone. Residual sulphur mustard is observed along with reaction products in all systems studied. Reaction mechanisms are also proposed for these interesting surface reactions. Above-mentioned carbons can be used in filtration systems for protection against hazardous gases such as sulphur mustard.

Adsorption↗
PubMed2006

Adsorption studies of a water soluble dye, Reactive Red MF-3B, using sonication-surfactant-modified attapulgite clay.

The removal of water-soluble Reactive Red MF-3B from aqueous media by sonication-surfactant-modified attapulgite clay was studied in a batch system. The surfactant used was octodecyl trimethyl ammonium chloride (OTMAC). Adsorbent characterizations were investigated using X-ray diffraction, infrared spectroscopy, and surface area analysis. The effects of pH, contact time, initial solute concentration, adsorbent dose, and temperature on the adsorption of Reactive Red MF-3B onto modified clay were investigated. On the basis of kinetic studies, specific rate constants involved in the processes were calculated and second-order adsorption kinetics was observed in the case. Film diffusion was found to be the rate-limiting step. Reactive Red MF-3B adsorption was found to increase with increase temperature. The Reactive Red MF-3B equilibrium adsorption data were fitted to Freundlich and Langmuir isotherm models, the former being found to provide the better fit of the experimental data. Thermodynamic parameters were calculated. From the results it can be concluded that the surfactant-modified clay could be a good adsorbent for treating Reactive Red MF-3B-contaminated waters.

Adsorption↗
PubMed2006

Enhancing struvite precipitation potential for ammonia nitrogen removal in municipal landfill leachate.

This study was conducted to improve struvite precipitation for NH4-N removal purpose in landfill leachate. For this purpose, we evaluated the effect of the feeding sequence of precipitating reagents (magnesium, orthophosphate, and buffering reagent) on NH4-N removal by forming struvite deposits. Struvite precipitation effectively proceeded by an addition of excess magnesium and phosphate sources followed by an addition of the buffering reagent, in which condition the local formation of inappropriate deposits or the contamination of the desired struvite was minimized. We also tested the effect of struvite addition as the seeding materials on NH4-N removal. Seed addition would increase the potential for the struvite crystal growth, which enhanced NH4-N removal performance in landfill leachate treatment.

Ammonia↗
PubMed2005

Rendering of quantum topological atoms and bonds.

In this article, we describe and apply an algorithm that visualizes atoms and bonds in molecules and van der Waals complexes, based on the topology of the electron density. The theory of quantum chemical topology defines both atoms and bonds via a single consistent procedure, and enables the association of an atomic shape with an atomic property (charge, dipole moment, volume, ...). Special attention is paid to the bridging of gaps arising in interatomic surfaces, in the presence of ring critical points or high ellipticity. This algorithm, in conjunction with the graphical user interface of the computer program MORPHY enables robust and efficient rendering of complicated interatomic surfaces, as found in larger systems.

Adamantane↗
PubMed2005

Sensitive and rapid detection of infectious hypodermal and hematopoietic necrosis virus (IHHNV) in shrimps by loop-mediated isothermal amplification.

A method for nucleic acid amplification, loop-mediated isothermal amplification (LAMP) is a novel, sensitive and rapid technique, which can be applied for disease diagnosis in aquaculture. Using the LAMP method, a highly specific and sensitive diagnostic system for infectious hypodermal and hematopoietic necrosis virus (IHHNV) detection was designed. A set of four primers was designed by targeting the IHHNV genome DNA. By the detection system, target DNA was amplified and visualized on agarose gel within 60min under isothermal condition at 64 degrees C. Without gel electrophoresis, the LAMP amplicon was visualized directly in the reaction tube by addition of SYBR Green I for a naked-eye inspection. The LAMP reaction was also assessed by the white turbidity of magnesium pyrophosphate (a by-product of LAMP) in the tube. The assay had a detection limit of 5-500 copies of DNA template with gel electrophoresis, SYBR Green I and white turbidity with naked-eye inspection. The detection sensitivity of LAMP was 100-fold higher than the PCR. A diagnostic procedure which is rapid and highly sensitive was developed for IHHNV detection.

Animals↗
PubMedDate not supplied

Dosimetric properties of the newly developed KLT-300 (LiF:Mg,Cu,Na,Si) TL detector.

The dosimetric properties of the newly developed KLT-300 (KAERI LiF:Mg,Cu,Na,Si TL detector) in KAERI (Korea Atomic Energy Research Institute) were investigated. The sensitivity of the TL detector was about 30 times higher than that of the TLD-100 by light integration. In the study of the dose linearity of the detector, the dose response was very linear up to 10 Gy and a sublinear response was observed at higher doses. The energy response of the detector was studied for photon energies from 20 to 662 keV. The results show that a maximum response of 1.004 at 53 keV and a minimum response of 0.825 at 20 keV were observed. The reproducibility study for the TL detector was also carried out. The coefficients of variation for each detector separately did not exceed 0.016, and for all the 10 detectors collectively it was 0.0054. IEC Standard requires that the coefficient of variation shall not exceed 0.075. So, the reproducibility of this new TL detector sufficiently satisfied the IEC requirements. A detection threshold of the detector was investigated and found to be 70 nGy by Harshaw 4500 TLD Reader.

Copper↗
PubMed2005

Drawing out the structural information of the first layer of hydrated ions: ATR-FTIR spectroscopic studies on aqueous NH4NO3, NaNO3, and Mg(NO3)2 solutions.

ATR-FTIR technique was used to obtain the difference spectra of aqueous NH4NO3 NaNO3, and Mg(NO3)2 solutions, with NO3- concentrations ranging from 0 to 4.00 mol dm(-3). The water monomers weakly hydrogen bonded with NO3- ions showed a positive peak near at 3565 cm(-1) for both Mg(NO3)2 and NH4NO3 solutions. The positive peak was shift to approximately 3543 cm(-1) for NaNO3 solutions due to the total contributions of the hydrated NO3- (approximately 3565 cm(-1)) and the hydrated Na+ (approximately 3440 cm(-1)). Compared with perchlorate solutions, the positive peak of nitrate solutions has a red shift of about 20 cm(-1) and the peak area is about half of that of perchlorate solutions with the same concentrations, indicating that the hydrogen bonding between NO3- and water monomers is relative stronger than that between ClO4- and water monomers, and NO3- has a strict requirement on the orientation of water molecules when hydrogen bonded with water monomers due to its planar structure. The ab initio calculations were used to understand the splitting of the nu3 band and hydration effect on the infrared activation of the nu1. The absorbance of nu3b, nu1 and nu2 bands, dependent on the type of cations, was observed to departed from Beer low with increasing concentrations, which is considered as the results of the interactions between cations and nitrate ions.

Magnesium Compounds↗
PubMed2005

Single crystal EPR study of VO(II) in magnesium potassium phosphate hexahydrate: a case of two substitutional vanadyl ions.

Single crystal EPR study of VO(II)-doped magnesium potassium phosphate hexahydrate has been carried out at room temperature. Single crystal rotations in the three orthogonal planes indicate that the paramagnetic impurity has entered the lattice in place of magnesium ions by replacing the equatorial and axial coordinated water molecules. The spin Hamiltonian parameters obtained for the two substitutional sites are: site 1: g1=1.9800, g2=1.9774, g3=1.9296, A1=7.25 mT, A2=8.09 mT, A3=18.69 mT and site 2: g1=1.9802, g2=1.9765, g3=1.9296, A1=6.82 mT, A2=8.48 mT, A3=18.75 mT, respectively. Superhyperfine, from protons of ligand water molecules, has been observed at certain orientations. It has been concluded that VO bond directions of the two substitutional ions are orthogonal to each other.

Crystallization↗
PubMed2005

Raman spectroscopy of newberyite, hannayite and struvite.

The phosphate minerals hannayite, newberyite and struvite have been studied by Raman spectroscopy using a thermal stage. Hannayite and newberyite are characterised by an intense band at around 980cm(-1) assigned to the v(1) symmetric stretching vibration of the HPO(4) units. In contrast the symmetric stretching mode is observed at 942cm(-1) for struvite. The Raman spectra are characterised by multiple v(3) anti-symmetric stretching bands and v(2) and v(4) bending modes indicating strong distortion of the HPO(4) and PO(4) units. Hannayite and newberyite are defined by bands at 3382 and 3350cm(-1) attributed to HOPO(3) vibrations and hannayite and struvite by bands at 2990, 2973 and 2874 assigned to NH(4)(+) bands. Raman spectroscopy has proven most useful for the analysis of these 'cave' minerals where complex paragenetic relationships exist between the minerals.

Magnesium Compounds↗
PubMed2006

Studies of the EPR g factor for Ni2+ ion in CsMgX3 (X=Cl, Br, I) crystals.

The complete high-order perturbation formula of g factor, including not only the widely used crystal-field (CF) mechanism, but also the neglected change-transfer (CT) mechanism in the CF theory, is established for a 3d8 ion in cubic octahedral site. From the formula, the g-shifts Deltag (=g-gs, where gs approximately 2.0023, the value of free electron) of Ni2+ ion in CsMgX3 (X=Cl, Br, I) crystals are calculated. The results suggest that the g-shift DeltagCT due to the CT mechanism and the DeltagCF due to CF mechanism have the same sign and the importance of DeltagCT follows the order: CsMgI3: Ni2+>CsMgBr3: Ni2+>CsMgCl3: Ni2+. So, in the calculations of g or Deltag of 3dn MXm clusters in crystals, the contributions to g factor from both the CT and CF mechanisms should be taken into account in the case of heavy-element ligand ions, such as Br- and I- ions.

Bromides↗
PubMed2006

A Fourier transform infrared spectroscopic study of Mg-rich, Mg-poor and acid leached palygorskites.

The FTIR spectra of pure magnesium-rich (Mg-rich) and magnesium-poor (Mg-poor) palygorskites, before and after short-term (<7 h) and long-term (360 h) acid leaching are presented here. Comparison of decomposition spectra of Mg-rich and Mg-poor palygorskites clearly shows that the absorption peaks related to pairs of octahedral cation differ depending on the octahedral site occupancy. Short-term acid leaching of palygorskites results in significant changes to FTIR absorption bands near 1200 and 790 cm-1. As the acid attack progresses, the band at 1200 cm-1 shifts to lower wavenumbers, whilst the band at 790 cm-1, which here is assigned to SiU-O-SiD symmetrical stretching vibration, shifts to higher wavelengths. Longer-term leaching of palygorskites results in the disappearance of 900-1200 cm-1 absorption bands, showing that the palygorskite has largely decomposed to amorphous silica. Assignments of several other bands have been made as follows: several vibrations relate to OH, i.e. 847 cm-1, hygroscopic water (1635 cm-1), Si-O vibrations 1100, 611-621, 470-481 cm-1, etc. appear in the FTIR spectra of 360 h acid leached palygorskite. Three bands near 1100, 611-621 and 470-481 cm-1 relate to Si-O vibration of an ideal hexagonal (Si2O5)n sheet.

Acids↗
PubMed2006

Defect models of the three trigonal Ti3+ centers in LiF:Ti3+ and LiF:Ti3+:Mg2+ crystals.

The EPR g factors of the trigonal Ti3+ center A in LiF:Ti3+ and two additional trigonal Ti3+ centers B and C in LiF:Ti3+:Mg2+ crystals are calculated from the third-order perturbation formulas based on the cluster approach. From the calculations and by considering the Ti3+ displacement along 111 axis obtained by ENDOR experiment, the defect models for the three Ti3+ centers are suggested. For center A, there are two possible models: (i) [Ti3+F3-O3(2-)] cluster and (ii) [Ti3+F6-] cluster with the Ti3+ off-center caused by a neighboring Li+ vacancy (VLi+) at <111> axis. The latter seems the more likely. The defect models of centers B and C are the [Ti3+F3-O(3)2-] clusters associated with a neighboring: Mg2+ ion at the Li+ site along 111 axis in the vicinity of three F- ions and three O2- ions, respectively. The reasonableness of these models is discussed.

Crystallization↗
PubMed2006

Theoretical study of EPR spectra for Mn2+ ion in [Mg(H2O)6]SnCl6 single crystal.

The relationship between the impurity structures and the electron paramagnetic resonance (EPR) parameters D, (a-F) have been studied by diagonalizing the complete energy matrices for Mn2+ ion in [Mg(H2O)6]SnCl6 single crystal in a trigonal ligand field within a weak-field-representation. It is shown that the local lattice structure around Mn2+ ion in [Mg(H2O)6]SnCl6 exhibits an elongation distortion which is different at 290 K and 77 K. The local structure parameters R=2.223+/-0.027A, theta=52.966+/-0.004 degrees and R=2.205+/-0.030A, theta=53.155+/-0.047 degrees for Mn2+ ion in [Mg(H2O)6]SnCl6 are determined at different temperatures 290 K and 77 K, respectively, and EPR parameters D and (a-F) can also get a satisfactory explanation simultaneously.

Cations, Divalent↗
PubMed2004

Effect of coal mine dust and clay extracts on the biological activity of the quartz surface.

Modification of the quartz surface by aluminium salts and metallic iron have been shown to reduce the biological activity of quartz. This study aimed to investigate the ability of water soluble extracts of coal mine dust (CMD), low aluminium clays (hectorite and montmorillonite) and high aluminium clays (attapulgite and kaolin) to inhibit the reactivity of the quartz surface. DQ12 induced significant haemolysis of sheep erythrocytes in vitro and inflammation in vivo as indicated by increases in the total cell numbers, neutrophil cell numbers, MIP-2 protein and albumin content of bronchoalveolar lavage (BAL) fluid. Treatment of DQ12 with CMD extract prevented both haemolysis and inflammation. Extracts of the high aluminium clays (kaolin and attapulgite) prevented inhibition of DQ12 induced haemolysis, and the kaolin extract inhibited quartz driven inflammation. DQ12 induced haemolysis by coal mine dust and kaolin extract could be prevented by pre-treatment of the extracts with a cation chellator. Extracts of the low aluminium clays (montmorillonite and hectorite) did not prevent DQ12 induced haemolysis, although the hectorite extract did prevent inflammation. These results suggest that CMD, and clays both low and rich in aluminium, all contain soluble components (possibly cations) capable of masking the reactivity of the quartz surface.

Administration, Inhalation↗
PubMed2004

Medical management of pediatric stone disease.

Childhood urolithiasis remains endemic in certain parts of the world, namely, Turkey and the Far East. The prevalence of nephrolithiasis in North American children varies widely among geographic regions and accounts for 1 per 1000 to 1 per 7600 pediatric hospital admissions. Stones occur in children of all ages. The clinical manifestations of stone disease are often more subtle in children when compared with the dramatic adult presentation. This article discusses the evaluation and medical management of pediatric stone disease.

Calcium↗
PubMed2004

Spiral computed tomography: role in determination of chemical compositions of pure and mixed urinary stones--an in vitro study.

OBJECTIVES: To determine the chemical composition of pure and mixed urinary calculi by multislice helical computed tomography (CT) in an in vitro setting. CT is becoming the preferred radiologic examination in diagnosis and management of calculus disease. The management of calculus disease can be facilitated by ascertaining the stone composition. Unnecessary shock wave treatment could be avoided if the fragility of the stones could be predicted at diagnosis. METHODS: A total of 107 stones (86 pure and 21 mixed) were measured in a multislice helical scanner within an air-filled environment. The scans were performed at two energy levels, 80 kV and 120 kV, with a 1-mm slice thickness. The chemical compositions of the urinary stones were assessed on the basis of the differences in the densities measured in Hounsfield units. The stones were assigned to six different groups according to the density measured in Hounsfield units: uric acid, struvite, cystine, calcium phosphate, calcium oxalate monohydrate, and calcium oxalate dihydrate. RESULTS: The differences in the density measured by multislice helical CT at 120 kV for the six groups of pure stones were statistically significant. The densities of the different regions within the mixed stones were also significantly different statistically from each other. The densities of the different regions measured in the mixed stones were not different from the densities of the corresponding pure stones. This finding supports the idea that different chemical compositions within a stone can be identified by their densities measured by multislice helical CT. CONCLUSIONS: The chemical compositions of both pure and mixed stones can be determined by multislice helical CT in an in vitro setting. The feasibility of in vivo determinations remains to be clarified.

Calcium Oxalate↗