Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “GLASSES”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25Linked to original sources
PubMed2003

Subcritical crack growth behavior of Al2O3-glass dental composites.

The purpose of this study is to investigate the subcritical crack growth (SCG) behavior of alumina-glass dental composites. Alumina-glass composites were fabricated by infiltrating molten glass to porous alumina preforms. Rectangular bars of the composite were subject to dynamic loading in air, with stressing rates ranging from 0.01 MPa/s to 2 MPa/s. The SCG parameter n was determined to be 22.1 for the composite, which is substantially lower than those of high-purity dense alumina. Investigations showed that glass phases are responsible for the low n value as cracks propagate preferentially within glass phases or along the interface between glass phases and alumina phases, due to the fact that glasses are more vulnerable to chemical attacks by water molecules under stress corrosion conditions. The SCG behavior of the infiltration glass was also investigated and the SCG parameter n was determined to be 18.7.

Aluminum Oxide↗
PubMed2006

In vivo performance of a sol-gel glass-coated collagen.

Synthetic bioactive materials offer possibilities to repair large tissue defects. It is well known that bioactivity, angiogenesis, and inflammation are key events in implant incorporation. Using glass-coated and glass-free collagen as potential bone graft substitutes, we carried out in vitro bioactivity and an in vivo angiogenesis and inflammation studies. The in vitro study showed bioactivity when the glass-coated samples were left in SBF for 5 days. This was confirmed by FTIR results, which presented P--O vibration bands characteristic of hydroxyapatite close to 1060 cm(-1) and 600 cm(-1). The in vivo response was evaluated following subcutaneous implantation of the biomaterial in the mouse dorsa. Angiogenesis, as determined by hemoglobin content extracted from implants 7 and 14 days after implantation, increased progressively in both glass-coated and glass-free collagen implants. However, vascularization was higher in the glass-coated collagen implants 14 days after implantation (mug Hb per mg wet tissue 6.0 +/- 0.3) compared with the glass-free group (1.6 +/- 0.1). The inflammatory process, determined by the levels of myeloperoxidase and N-acetylglucosaminidase, was similar for both implants. This study shows that glass-coated collagen implants hold osteogenic and angiogenic potential and may be used in clinical conditions requiring improvement of these biological processes.

Animals↗
PubMed1998

Transformation reactions of partially gold-coated bioactive Ca-P glass granules investigated by analytical scanning electron microscopy.

In the present work, we have clarified the detail of the surface transformation reactions of bioactive calcium-phosphate (Ca-P) glass granules induced by in vivo implantation in rabbit dorsal muscle sites. To this aim we have compared the behaviour, during the same implantation, between the as-prepared and gold-coated only-on-one-side glass granules. The deposited gold layer enabled us to determine very precisely the initial position of the surface of the glass before the transformation took place. In addition, since the gold layer acts as a diffusion barrier, it allowed the study of the direction and the mechanism of crystal growth which occurred at the glass surface. Lapped and polished cross-sections of the samples were examined by backscattered electron (BSE) imaging and quantitative (with standards) x-ray energy dispersive spectroscopy (EDS) in a scanning electron microscope (SEM). The observations showed the presence of an interlayered structure. Quantitative EDS microanalysis performed by profiling the electron beam across the samples indicated the presence of hydrated calcium phosphate in the external layer, an inhomogeneous silica-rich gel-type layer in the middle layer, and an unaffected original Ca-P glass in the centre. From the comparison with those granules gold-coated on one side, we deduced that the hydrated calcium phosphate layer grew towards the interior of the granules at the expense of the starting glass. A simple model, based on the balance of the concentrations of the elements which have diffused in the different layers, is proposed to explain the contribution of the elements constituting the original glass to the formation of the different layers. This result agrees with the experimental data obtained from image analysis and the microstructural behaviour of this type of glass is discussed.

Animals↗
PubMed1995

Morphological transformation induced by glass fibers in BALB/c-3T3 cells.

Studies were conducted to determine whether 1) glass fibers can induce morphological transformation in BALB/c-3T3 cells, 2) the transforming activity of glass fibers is related to fiber size, and 3) transformed cells induced by glass fibers possess neoplastic properties. In the transformation assay, BALB/c-3T3 cells were treated with three different types of glass fibers: Manville code 100 (JM-100, Manville Corp., Denver, CO), Owens-Corning AAA-10 (AAA-10, Owens-Corning Corp., Toledo, OH), and Owens-Corning general building insulation (ISL, Owens-Corning Corp.) fibers. The neoplastic properties were investigated using the soft agar cloning and gene transfection methods. All three different glass fibers were cytotoxic at high concentrations and induced dose-related increases in morphological transformation. The transforming activity was inversely related to fiber size, with AAA-10 showing higher activity than JM-100 and JM-100 showing higher activity than ISL fiber. Transformed cells induced by glass fibers exerted anchorage-independent growth (90%) and DNA transfection-mediated transformation (100%). These results indicate that glass fibers are capable of transforming mammalian (BALB/c-3T3) cells in vitro as a function of their physical properties and that glass fiber-induced transformed cells possess preneoplastic characteristics.

3T3 Cells↗
PubMed1999

A risk assessment for exposure to glass wool.

Synthetic vitreous fibers (SVFs) have been widely used as insulation material in places where asbestos was used many years ago and therefore the hazards have been compared. Since the three principal types of asbestos fibers types have caused lung cancer at high exposures, there is a widely held belief that all fibers are carcinogenic if inhaled in large enough doses. Hence, on a morphological basis, SVFs have been studied for their carcinogenic potential. However, there is considerable evidence that differences exist among fibers in their potency to produce a carcinogenic response. In this attempt to carry out a numerical risk assessment for the installers of blown glass wool (fiber) insulation, we start with a characterization of the material; then we review the exposures both in manufacturing and installation. Neither the epidemiological studies of human exposure nor the animal studies have shown a marked hazardous effect from glass wool and we can therefore be sure that any effect that might exist is small. But in this case, as in many other situations where there is a potential hazard, society desires further reassurance and therefore we have made a mechanistic calculation. There are good estimates of the risk associated with exposure to chrysotile asbestos at high exposures and doses. We have therefore taken these numbers and discussed how much less risky an exposure to glass wool fibers might be. We conclude that for a given fiber count, glass wool is five to ten times less risky (and of course the risk might be zero). The risk for a nonsmoking installer of glass wool fiber insulation who wears a respirator is about 6 in a million (and might be zero) per year. This means that out of a million installers there might be six lung cancers from this cause every year or out of 10,000 installers there might be one in 16 years. The low risk of 6 in a million per year of a worker blowing glass wool is consistent with the fact that no one has found any of cancer attributable to the manufacture or installation of glass wool fibers in spite of diligent searches. This is compared with several other occupational risks. Nonetheless common prudence suggests that any installer of blown glass wool fiber insulation wear a respirator.

Animals↗
PubMed1994

Effect of glass bioactivity on new bone development induced by demineralized bone matrix in a rat extraskeletal site.

The effects of two kinds of bioactive glass and two kinds of phosphate-free glass on new bone development induced by demineralized bone matrix (DBM) were studied in the rat abdominal muscle pouch model. After 8 weeks' implantation histomorphometric analysis revealed that the amount of new bone in DBM combined with bioactive glass was comparable to DBM without bioactive glass. DBM grafts combined with phosphate-free glass showed significantly less new bone formation. Scanning electron microscopic examination confirmed that new bone bonded to the surface of bioactive glass. The release of ions from the glass seemed to slow down after new bone had bonded to it. Exclusion of phosphate from a bioactive glass resulted in loss of ability to develop the Ca,P-rich surface layer needed for bone bonding.

Animals↗
PubMed2000

Tissue response to bioactive glass and autogenous bone in the rabbit spine.

Bioactive glass S53P4 and autogenous bone were used as bone graft materials in an experimental rabbit model for spinal fusion. The study focused on differences in bone formation using bioactive glass and autogenous bone as bone graft materials. Bioactive glass, a mixture of bioactive glass and autogenous bone or autogenous bone was implanted for 4 and 12 weeks at the thoracolumbar level. Undecalcified sections were prepared for histological and histomorphometric evaluation. New bone formation was seen in all implanted areas, with the bone growing from the surface of the vertebrae enclosing both glass and autogenous bone in the bone fusion mass. During the observation period, the measured amount of bone remained at the same level in the autograft group, while in the glass and the glass/autograft bone groups it increased. By 12 weeks, no significant difference in bone formation between the three groups was observable. The bone formation in two selected standardized areas at 12 weeks was 21 and 24% in the glass group, 23 and 28% in the glass/autograft bone group and 27 and 26% in the autograft bone group. We consider bioactive glass as a potential bone graft material in experimental spinal fusion.

Animals↗
PubMed2006

Comparison of glass vessels and plastic bags for enclosing living plant parts for headspace analysis.

Plants release volatile chemicals into their surrounding air space that can affect the physiology of neighboring plants and influence the behavior of insects. In studying these interactions, it is desirable to collect volatiles from plants that have not been excised and are growing under as natural conditions as possible. We compared a vessel of borosilicate glass and Nylon-6 or polyester [poly(ethyleneterephthalate) or PET] cooking bags for enclosing plants during collection of volatiles. A push-pull airflow system was used, and volatiles were trapped on Tenax TA and analyzed by gas chromatography after thermal desorption. Low levels of impurities were found for the glass vessel and polyester bags. Nylon bags contained higher levels and more impurities. Recoveries of standards of 10 plant volatiles were measured in static and dynamic systems. In a static air system, there was good recovery only from the glass vessel. In a dynamic system, there was generally good recovery from both the glass vessel and polyester bags. Recoveries of alpha-pinene and (Z)-jasmone were poor throughout. The former was shown to have a very low breakthrough volume on the Tenax TA adsorbent, and the latter may be strongly adsorbed on glass. All three materials were essentially transparent in the IR and visible (photosynthetic) range but with significantly different absorptions in the UV range. In a simulated dynamic entrainment in full sunlight, internal vessel temperatures were higher than ambient by up to 9.5 degrees C in the glass vessel and 7.5 degrees C in the polyester bag. Lower increases in temperature relative to ambient (<1 degrees C) were recorded when entrainments were conducted in the shade. In a field trial, the profiles of volatiles collected from an apple tree infested with rosy apple aphid using a glass vessel and a polyester bag were similar. Polyester bags are recommended as more convenient than glass vessels for the enclosure of plants during the collection of volatiles.

Adsorption↗
PubMed2005

Plastic versus glass support for an immunoassay on metal-coated surfaces in optically dense samples utilizing directional surface plasmon-coupled emission.

We compared plastic (polycarbonate) and high-quality glass support materials for gold-coated slides, when performing a model immunoassay against rabbit IgG using fluorescently labeled (AlexaFluor-647) anti-rabbit IgG, and detecting surface plasmon-coupled emission (SPCE) signals. Both, glass and plastic slides were simultaneously coated with a 48-nm layer of gold and protected with a 10-nm layer of silica. The maximum SPCE signal of AlexaFluor-647 was only two- to three-fold smaller on plastic slides than on glass slides. A small difference in the SPCE angles on glass (theta (F) = 55 degrees ) and plastic (theta (F) = 52.5 degrees ) slides was observed and can be explained with a slightly smaller refractive index of the plastic. We have not found any difference in the angle distribution (sharpness of the fluorescence signal at optimal SPCE angle) for the plastic slide compared to the glass slide. The kinetics of binding was monitored on the plastic slide as well as on the glass slide. Optically dense samples, a 4% red blood cell suspension and a 15% hemoglobin solution, are causing a reduction in the immunoassay SPCE signal by approximately 15% and three times, respectively, and the percentage of the reduction is the same for plastic and for glass slides. We believe that plastic substrates can be readily used in any SPCE assay, with only marginally lower total signal compared to high-quality glass slides.

Animals↗
PubMed1988

Structural modifications and biological compatibility of doped bio-active glasses.

The Raman laser and infrared spectra of doped bio-active glasses of the 45S5 type are presented and discussed. The spectroscopic results show that the doping agents cause the destruction of the basic glass structure and the consequent formation of SiO4(4-) units in the glass network. When the doped glasses have been immersed in a physiological solution (199 medium), a film of calcite forms on the glass surface and this modification is related to the type of doping agent used, decisive for close linking between metal supports and the glass. The presence of doping agents does not prevent the normal growth of the bone onto the surface of doped bioactive glasses. Histological tests show that tissue response to very fine powders of doped glasses increases up to 15 days more or less according to the structural modifications revealed by spectroscopic measurements.

Animals↗
PubMed2005

Peripheral quantitative computed tomography in evaluation of bioactive glass incorporation with bone.

This laboratory study examined the feasibility of non-invasive, in vivo peripheral quantitative computed tomography (pQCT) method in evaluation of bioactive glass incorporation with bone. An intramedullary defect model of the rat tibia was applied. The defect was filled with bioactive glass microspheres (diameter of 250-315 microm) or was left to heal without filling (empty controls). The results of the pQCT analysis were compared with those of histomorphometry. In the control defects, there was a good correlation (r2 = 0.776, p < 0.001) between the pQCT density of the intramedullary space and the amount of new bone measured by histomorphometry. In the defects filled with bioactive glass, the use of thresholding techniques of the applied pQCT system (Stratec XCT Research M) failed in separation of new bone formation and bioactive glass particles. However, detailed analysis of the pQCT attenuation profiles showed time-related changes which well matched with the histomorphometric results of new bone formation both in control and bioactive glass filled defects. The biphasic pQCT attenuation profiles of bioactive glass filled defects could be separated into two distinct peaks. In statistical analysis of various variables, the center (i.e. the value of attenuation) of the major attenuation peak was found to be the most significant indicator of the incorporation process. The center of the peak initially decreased (during the first 4 weeks of healing) and thereafter increased. These two phases probably reflect the primary resorption and reactivity of the bioactive glass microspheres in vivo followed by secondary new bone formation on their surfaces. Based on these results, pQCT-method seems to be suitable for in vivo follow-up of the bioactive glass incorporation processes. Although the imaging technique is not able to discriminate the individual microspheres from invading new bone unambiguously, the attenuation profiling seems to give adequate information about the state of the incorporation process. This information may help to establish non-invasive imaging techniques of synthetic bone substitutes for preclinical and clinical testing of their efficacy.

Animals↗
PubMed2005

Effect of the glass surface modification on the strength of methacrylate monolith attachment.

The influence of glass surface modification in order to determine strength of the monolith attachment was studied. Modification consists of pre-treatment of the glass with chemicals or boiling in deionized water, silanization and drying has been investigated on different types of glass. Amount of silane groups was determined by measurement of the contact angle between the glass surface and water drop. The highest values were found for soda-lime glass. Strength of the monolith attachment was established by pumping ethanol through the monolithic capillaries and measuring the pressure drop at which monolith was dislodged. Surprisingly, it was found that the critical part of the glass surface modification procedure is glass pre-treatment. Good results were obtained with glass boiled in water for 2.5 h or more.

Glass↗
PubMed2005

The influence of calcium fluoride (CaF2) on biaxial flexural strength of apatite-mullite glass-ceramic materials.

OBJECTIVE: The aim of this study was to evaluate the effect of varying the molar percentage of calcium fluoride (CaF2) on the biaxial flexural strength (BFS) of apatite-mullite glass-ceramics. METHODS: Three apatite-mullite glass-ceramic materials were produced based on a formula of 4.5SiO(2)-3Al2O(3)-1.5P2O(5)-3CaO-XCaF2, where X=0.5, 1 and 3 and called HG 1-3, respectively. These materials were used to produce discs of 2 mm thickness and 12 mm diameter using the lost-wax casting process. 30 discs per material were produced, 10 discs per material were cast and then left to bench cool (glass state), 10 discs per material were given a heat treatment at 765, 679 and 629 degrees C for 1h and then heat treated at 890, 860 and 824 degrees C for the HG 1-3, respectively, for another hour to form apatite. Ten discs per material were heat treated as previously described (765, 679 and 629 degrees C) then heat treated for 1h at 1022, 987 and 892 degrees C for the HG 1-3, respectively, to form apatite-mullite. The heat treatment temperatures were obtained from differential thermal analysis data. A lithium disilicate glass-ceramic was used as a control. Biaxial flexural strength (BFS) was determined using a LIoyd 2000R tester. RESULTS: Data showed that the BFS increased as the fluoride content increased, and the apatite-mullite samples had significantly higher BFS values than the as cast glass or apatite samples (p<0.05), with the control having significantly higher BFS values than all the HG glass-ceramic materials for every condition (p<0.05). The fictive glass transition temperature (Tg) was observed to drop with increasing fluoride content. SIGNIFICANCE: Increasing the CaF2 content increased the BFS and decreased the Tg of the glass-ceramic materials tested.

Aluminum Silicates↗
PubMed2005

The effects of boric acid and phosphoric acid on the compressive strength of glass-ionomer cements.

OBJECTIVES: Both boric acid (H3BO3) and phosphoric acid (H3PO4) are components of dental cements, commonly incorporated into glass (as ingredients in the melt) and occasionally added to the powder or liquid components. This study investigated the effect of boric acid addition to an experimental glass-ionomer powder and the effect of phosphoric acid addition to a glass-ionomer liquid on the 24-h compressive strength. METHODS: Boric acid powder was added in various concentrations to an experimental glass-ionomer powder and, separately, phosphoric acid was added to an experimental glass-ionomer liquid. Powders and liquids were dosed into capsules at various powder:liquid ratios and cements thus formed were assessed for 24-h compressive strength. RESULTS: Incorporation of boric acid in glass-ionomer powder resulted in a pronounced decrease (p < 0.05 at 1% boric acid) in compressive strength. Addition of phosphoric acid produced initially stronger cements (up to 13% increase at 1% phosphoric acid) before also declining. SIGNIFICANCE: The incorporation of less than 2% w/w phosphoric acid in glass-ionomer liquids may improve cement strengths without compromising clinical usefulness. The incorporation of boric acid in glass-ionomer cements is contraindicated.

Boric Acids↗
PubMed2006

Preparation of mica-based glass-ceramics with needle-like fluorapatite.

OBJECTIVES: The aim of this study was to prepare mica-based glass-ceramics containing needle-like fluorapatites, and to understand the relationship between the composition, the microstructure and mechanical properties. METHODS: The specimens were prepared by casting and subsequent heat treatment. The crystalline phases in the specimens were determined by X-ray diffraction (XRD). The microstructures of the fractured surface were examined by using a scanning electron microscope with an energy dispersive spectrometer (SEM/EDS). The Vickers hardness and fracture toughness were determined by the indentation method. Statistical analysis of the results was performed by one-way analysis of variance (ANOVA) and Tukey's test. The bioactivity of the glass-ceramics was evaluated by soaking the polished specimens in the simulated body fluid (SBF). RESULTS: Needle-like fluorapatite crystals were successfully obtained in mica-based glass-ceramics by controlling the heat treatment process. The formation of needle-like fluorapatite crystals, instead of particle-like crystals reported in previous studies, can be attributed to the one-dimensional rapid growth of fluorapatite along the c-axis. The mechanical properties of the glass-ceramics are related to the fluorapatite content. The higher the fluorapatite content, the higher the Vickers hardness and the fracture toughness (p<0.01). The bioactivity test showed that the needle-like fluorapatite-containing glass-ceramics possess very good bioactivity. SIGNIFICANCE: As the needle-like fluorapatite crystal has the same morphology as human bones, it endows the mica-based glass-ceramics with good bioactivity. Moreover, the needle-like fluorapatite crystal toughens the base glass-ceramics. Therefore, the mica-based glass-ceramics with needle-like fluorapatite have the potential for the restoration of bone defects and implants.

Aluminum Silicates↗
PubMed2005

Spectral analysis of Cu(2+): B(2)O(3)--ZnO--PbO glasses.

A new series of heavy metal oxide (PbO) based zinc borate glasses in the chemical composition of (95-x)B(2)O(3)-5ZnO-xPbO (x=10, 15, 20, 25, 30, 35, 40, 45 and 50 mol%) have been prepared to verify their UV filtering performance. Both direct and indirect optical band gaps (E(opt)) have been evaluated for these glasses. For a reference glass of 45B(2)O(3)-5ZnO-50PbO, refractive indices at different wavelengths are measured and found the results satisfactorily correlated with the theoretical data upon the computation of Cauchy's constants of A=1.766029949, B=159531.024 nm(2) and C=-1.078 x 10(10) nm(4). Measurements concerning X-ray diffraction (XRD), FT-IR, differential scanning colorimeter (DSC) profiles have been carried out for this glass. The FT-IR profile has revealed that the glass has both BO(3) and BO(4) units. From DSC thermogram, glass transition temperature (T(g)), crystallization temperature (T(c)) and melting temperature (T(m)) have been located and from them, other related parameters of the glass have also been calculated. Visible absorption spectra of 45B(2)O(3)-5ZnO-(50-x)PbO-xCuO (x=0. 1, 0.2, 0.5 and 1.0 mol%) have revealed two absorption bands at around 400 nm ((2)B(1g)-->(2)E(g)) and 780 nm ((2)B(1g)-->(2)B(2g)) of Cu(2+) ions, respectively. Emission bands at 422 and 512 nm are found for the 1 mol % CuO doped glass with excitations at 306 and 332 nm.

Beryllium↗
PubMed1981

Physical properties of lipid monolayers on alkylated planar glass surfaces.

A method for transferring a lipid monolayer from an air-water interface to an alkylated glass slide is described. Specific antibodies bind tightly to lipid haptens contained in these monolayers on the glass slides. We conclude that the polar head groups of the lipids face the aqueous phase. A monolayer containing a fluorescent lipid was used to show that the monolayer is homogeneous as observed with an epifluorescence microscope. A periodic pattern photobleaching technique was used to measure the lateral diffusion of this fluorescent lipid probe in monolayers composed of dipalmitoyl phosphatidylcholine and dimyristoyl phosphatidylcholine. Different regions of the pressure-area isotherms of the monolayers at the air-water interface can be correlated with the diffusion of the fluorescent probe molecules on the monolayer-coated glass slide. Monolayers derived from the so-called "solid-condensed" state of a monolayer at the air-water interface showed a very low probe diffusion coefficient in this monolayer when placed on a glass slide, D </= 10(-10) cm(2)/s. Monolayers derived from the "liquid condensed/liquid expanded" (LC/LE) region of the monolayer isotherms at the air-water interface showed rapid diffusion (D > 10(-8) cm(2)/s) when these same monolayers were observed on an alkylated glass slide. The monolayers attached to the glass slide appear to be homogeneous when derived from monolayers in the LC/LE region of monolayers at the air-water interface. There is no major variation of the diffusion coefficient of a fluorescent lipid probe when this diffusion is measured on a lipid monolayer on a glass slide, for monolayers derived from various regions of the LC/LE monolayers at the air-water interface. This is consistent with the view that the LC/LE region is most likely a single fluid phase. Monolayers supported on a planar glass substrate are of much potential interest for biophysical and biochemical studies of the interactions between model membranes and cellular membranes, and for physical chemical studies relating the properties of lipid monolayers to the properties of lipid bilayers.

Air↗
PubMed1988

Patch electrode glass composition affects ion channel currents.

The influence of patch electrode glass composition on macroscopic IV relations in inside-out patches of the cGMP-activated ion channel from rod photoreceptors was examined for a soda lime glass, a Kovar sealing glass, a borosilicate glass, and several soft lead glasses. In several glasses the shape or magnitude of the currents changed as the concentration of EGTA or EDTA was increased from 200 microM to 10 mM. The changes in IV response suggest that, at low concentrations of chelator, divalent cations are released from the electrode glass and interact with the cGMP-activated channel. Possible mechanisms are discussed to explain the observations, and several comments are made concerning the choice of a glass for patching.

Animals↗