Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “methods”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24Linked to original sources
PubMed2002

Comparison of two methods for reconstruction of the posterior cruciate ligament using a computer based method: quantitative evaluation of laxity, three-dimensional kinematics and ligament deformation measurement in cadaver knees.

The aim of this paper is to present a biomechanical comparison of two different methods for reconstruction of the posterior cruciate ligament in cadaver knees. We used an original computer-based method allowing precise calculation of three-dimensional (3D) knee kinematic parameters as well as the estimation of combined graft deformation (elongation-flexion-torsion). After isolated posterior cruciate ligament (PCL) dissection, double bundle and 'over-the-bottom' methods were performed successively on each knee using synthetic polyester ligaments. The effect of pre-tensioning was tested with the 'over-the-bottom' method. antero-posterior (A-P) and rotational laxity as well as 3D kinematics were recorded and analysed. Our computer based method allowed us to show that both reconstruction methods were equivalent in restoring A-P and rotational laxity as well as kinematic curves. Combined deformation of the prostheses was equivalent for both ligaments.

Aged↗
PubMed2002

Method detection limit determination and application of a convenient headspace analysis method for methyl tert-butyl ether in water.

Methyl tert-butyl ether (MTBE) is a common groundwater contaminant, introduced to the environment by leaking petroleum storage tanks, urban runoff, and motorized watercraft. In this study. a simplified (static) headspace analysis method was adapted for determination of MTBE in water samples and soil water extracts. The MDL of the headspace method was calculated to be 2.0 microg L(-1) by the EPA single-concentration design method(1) and 1.2 microg L(-1) by a calibration method developed by Hubaux and Vos (Hubaux, A.; Vos, G. Anal. Chem. 1970,42, 849-855). The MDL calculated with the Hubaux and Vos method was favored because it considers both a true positive and a false positive. The static headspace method was applied to analysis of a tap water sample and a monitoring well sample from a gasoline service station, a river sample, and aqueous extracts from soil excavated during removal of a leaking underground storage tank (LUST). The water samples examined in this study had MTTBE concentrations ranging from 6 to 19 microg L(-1). Aqueous extracts of a soil sample taken from the LUST site had 8 microg L(-1) MTBE.

Calibration↗
PubMed1999

Quantification and interpretation of total petroleum hydrocarbons in sediment samples by a GC/MS method and comparison with EPA 418.1 and a rapid field method.

Total petroleum hydrocarbons (TPH) as a lumped parameter can be easily and rapidly measured or monitored. Despite interpretational problems, it has become an accepted regulatory benchmark used widely to evaluate the extent of petroleum product contamination. Three currently used methods (GC/MS, conventional EPA 418.1, and a rapid field method PetroFLAG) were performed to quantify the TPH content in samples collected from a site contaminated by transformer oil. To standardize the method and improve the comparability of TPH data, crucial GC-based quantification issues were examined, e.g., quantification based on internal standards (ISTD) vs external standards (ESTD), single vs multiple ISTD, and various area integration approaches. The interpretation of hydrocarbon chromatographic results was examined in the context of field samples. The performance of the GC/MS method was compared with those of EPA 418.1 and PetroFLAG. As a result, it was observed that the ISTD quantification method was preferred to the ESTD method, multiple ISTD might be better than single ISTD, and three different area integration approaches did not have a significant effect on TPH results. Evaluation of the chromatograms between a reference sample and three unknown samples showed that the extent of contamination varied appreciably with sample depth. It was also found that there existed a good positive correlation between GC/MS and both EPA 418.1 and PetroFLAG, and that EPA 418.1 produced the higher overall estimate while GC/MS and PetroFLAG resulted in lower, more statistically comparable TPH values.

Chemistry Techniques, Analytical↗
PubMed2000

Development of a solid-phase extraction method for phenoxy acids and bentazone in water and comparison to a liquid-liquid extraction method.

A rapid solid-phase extraction (SPE) method was developed for the determination of bentazone and the phenoxy acids 2,4-D, dichlorprop, MCPA, and mecoprop in Norwegian environmental water samples. Cartridges with a high-capacity cross-linked polystyrene-based polymer were used for off-line preconcentration. The effects of elution solvent, elution volume, sample volume, sorbent mass, pH, and flow rate on the recoveries of the pesticides were investigated using HPLC. Average recovery of >90% was achieved with 500 mg sorbents using 2 mL of methanol with 5% NH3 as elution solvent. The recoveries were independent of sample pH in the tested range of pH 1-7. Using a sample volume of 200 mL, the limits of determination for the phenoxy acids and bentazone are 0.02 microg/L. Sample volumes up to 2000 mL at a flow rate of 60 mL/min could be handled without any loss of analytes, which makes it possible to lower the limits of determination. The SPE method was compared to a routinely used liquid-liquid extraction method. Three different water matrices spiked at 1.0 and 0.05 microg/L were extracted, and the quantification was performed by GC-MS. Both methods permitted the determination of phenoxy acids and bentazone in distilled water, creek water, and well water down to a level of 0.05 microg/L with recoveries >80% for 200 mL samples. Important advantages of the SPE method compared to the liquid-liquid extraction method were the short extraction times, lack of emulsions, use of disposable equipment, and reduced consumption of organic solvents.

Benzothiadiazines↗
PubMed1999

New 4-point pharmacophore method for molecular similarity and diversity applications: overview of the method and applications, including a novel approach to the design of combinatorial libraries containing privileged substructures.

A new 4-point pharmacophore method for molecular similarity and diversity that rapidly calculates all potential pharmacophores/pharmacophoric shapes for a molecule or a protein site is described. The method, an extension to the ChemDiverse/Chem-X software (Oxford Molecular, Oxford, England), has also been customized to enable a new internally referenced measure of pharmacophore diversity. The "privileged" substructure concept for the design of high-affinity ligands is presented, and an example of this new method is described for the design of combinatorial libraries for 7-transmembrane G-protein-coupled receptor targets, where "privileged" substructures are used as special features to internally reference the pharmacophoric shapes. Up to 7 features and 15 distance ranges are considered, giving up to 350 million potential 4-point 3D pharmacophores/molecule. The resultant pharmacophore "key" ("fingerprint") serves as a powerful measure for diversity or similarity, calculable for both a ligand and a protein site, and provides a consistent frame of reference for comparing molecules, sets of molecules, and protein sites. Explicit "on-the-fly" conformational sampling is performed for a molecule to enable the calculation of all geometries accessible for all combinations of four features (i.e., 4-point pharmacophores) at any desired sampling resolution. For a protein site, complementary site points to groups displayed in the site are generated and all combinations of four site points are considered. In this paper we report (i) the details of our customized implementation of the method and its modification to systematically measure 4-point pharmacophores relative to a "special" substructure of interest present in the molecules under study; (ii) comparisons of 3- and 4-point pharmacophore methods, highlighting the much increased resolution of the 4-point method; (iii) applications of the 4-point potential pharmacophore descriptors as a new measure of molecular similarity and diversity and for the design of focused/biased combinatorial libraries.

Binding Sites↗
PubMed2000

New digital measurement methods for left ventricular volume using real-time three-dimensional echocardiography: comparison with electromagnetic flow method and magnetic resonance imaging.

AIM: The aim of this study was to investigate the feasibility and accuracy of using symmetrically rotated apical long axis planes for the determination of left ventricular (LV) volumes with real-time three-dimensional echocardiography (3DE). METHODS AND RESULTS: Real-time 3DE was performed in six sheep during 24 haemodynamic conditions with electromagnetic flow measurements (EM), and in 29 patients with magnetic resonance imaging measurements (MRI). LV volumes were calculated by Simpson's rule with five 3DE methods (i.e. apical biplane, four-plane, six-plane, nine-plane (in which the angle between each long axis plane was 90 degrees, 45 degrees, 30 degrees or 20 degrees, respectively) and standard short axis views (SAX)). Real-time 3DE correlated well with EM for LV stroke volumes in animals (r=0.68-0.95) and with MRI for absolute volumes in patients (r-values=0.93-0.98). However, agreement between MRI and apical nine-plane, six-plane, and SAX methods in patients was better than those with apical four-plane and bi-plane methods (mean difference = -15, -18, -13, vs. -31 and -48 ml for end-diastolic volume, respectively, P<0.05). CONCLUSION: Apically rotated measurement methods of real-time 3DE correlated well with reference standards for calculating LV volumes. Balancing accuracy and required time for these LV volume measurements, the apical six-plane method is recommended for clinical use.

Adult↗
PubMed2001

Repair of bilateral clefts of lip, alveolus and palate Part 1: A refined method for the lip-adhesion in bilateral cleft lip and palate patients.

The protruding premaxilla represents the most severe problem in the surgical closure of a bilateral cleft lip, alveolus and palate (BCLP). In principle there are two methods to overcome this obstacle: (1) preliminary lip adhesion and (2) presurgical repositioning with intraoral devices. According to the various degrees of premaxillary protrusion, sometimes adhesion alone is sufficient, if the surgical technique is unlikely to break down. In this paper a refined adhesion method is presented, withstanding traction to the wound margins and concomitantly enables lip and nose repairs in a single second operation. For patients with severe premaxillary protrusion, presurgical use of a Latham appliance achieves conditions for safe lip adhesion as above. Both treatment methods are outlined. Copyright 2001 European Association for Cranio-Maxillofacial Surgery.

Journal Article↗
PubMedDate not supplied

[Determination of bilirubin in capillary plasma by a direct photometric method (DPM, bilirubinometer) and the chemical determination of bilirubin in the bilirubin determination (2,5-dichlorophenyldiazonium method) in serum of venous blood samples].

The determination of bilirubin in serum was performed by the 2.5-dichlorphenyldiazonium method (DPD) and in capillary plasma by the direct photometric method (DPM). Both methods showed a good precision and accuracy. The investigation was carried out in 135 samples with a bilirubin concentration up to 25 mg/dl. The comparison of the two methods in 62 samples with a bilirubin concentration up to 10 mg/dl showed a correlation coefficient of r = 0.862 and in 73 samples with a bilirubin concentration between 10 and 25 mg/dl a correlation coefficient of r = 0.893. In 29 cases (21.5%) we found differences between the two methods of 1.5-4.0 mg/dl. Most of them were in the critical higher range. Discussion of the DPD and DPM methods.

Bilirubin↗
PubMed2003

A novel dual radio- and stable-isotope method for measuring calcium absorption in humans: comparison with the whole-body radioisotope retention method.

BACKGROUND: Dietary calcium absorption can be determined only with the use of isotope techniques. Currently used isotope techniques require exclusive equipment or are not true tracer approaches. OBJECTIVE: The objective was to compare a dual-isotope method combining radioisotopes and stable isotopes with a whole-body radioisotope retention method for measuring calcium absorption. DESIGN: Seven healthy adults aged 21-27 y consumed a test meal containing 63 +/- 14 (macro x +/- SD) mg Ca together with a water solution of (47)Ca (0.11 MBq). One hour after ingestion, 18 mg (44)Ca was administered intravenously. All feces and urine were collected for 5 and 6 d, respectively. Calcium absorption was estimated from whole-body retention of the radioisotope 12 times over 3 wk after ingestion and from the excretion of (47)Ca and (44)Ca in a 24-h urine sample collected on day 2. (44)Ca in urine was determined by inductively coupled plasma mass spectrometry. RESULTS: Mean (+/- SD) calcium absorption was 75 +/- 9% with the dual-isotope method and was 74 +/- 8% with the whole-body radioisotope retention method. There was a high degree of agreement between the methods. CONCLUSION: The dual-isotope method is a valid approach for measuring calcium absorption from a single meal.

Administration, Oral↗
PubMedDate not supplied

Cyanide assay: statistical comparison of a new gas chromatographic calibration method versus the classical spectrophotometric method.

This work compares two different methods for assaying hydrogen cyanide, a spectrophotometric method and a headspace gas chromatographic method, each with its own reference standard generation. In the first method, the reference standards are cyanide solutions. In the second method, the reference standards are based upon the in situ reduction of ethyl thiocyanate by dithiothreitol to produce hydrogen cyanide. Furthermore, hydrogen cyanide concentration in the blood of patients who were poisoned by smoke inhalation or who committed suicide by cyanide ingestion is determined using both methods. Results are discussed using statistical comparison.

Calibration↗
PubMed1981

A method for the dissection of lymph node specimens (anatomic method).

A method called the "anatomic method" of dissecting lymph nodes in a variety of cancer specimens, is presented. It is found to be comparable to the clearing method in terms of detecting lymph nodes and is unencumbered by the slow turnaround time and economic inconvenience. The anatomic method is described in four steps, illustrated by a schematization of the technique. Its advantages over the clearing method include: 1) it is time saving; 2) it is conducted on the fresh state specimen; 3) it is economical; 4) it reduces the monotony often associated with such dissections; 5) it serves as a teaching exercise. Adoption of the method by pathologists is recommended.

Dissection↗
PubMed1988

Agreement among physician assessment methods. Searching for the truth among fallible methods.

To determine the convergent validity of four methods of physician assessment--physician interview, patient interview, chart audit, and videotaped observation--these methods were compared for their ability to detect medication regimens prescribed for patients with chronic obstructive pulmonary disease (COPD). Comparisons of data from the four methods revealed substantial discrepancies among them. In fact, the methods were in full accord only 36% of the time in detecting theophylline prescription, and even less often for the other COPD medications. According to physician interview, 78% of patients were on theophylline; chart audit revealed 62% of patients were on the medication; videotaped observation, 69%; and only 59% of patients reported themselves to be on theophylline. An iterative analysis, applied to determine which method most accurately captures data, revealed that reports from physician interviews were the most precise source of data. Although the order of merit was much the same for each of the drugs studied, there were some differences in levels of sensitivity across drugs. Specificities were consistently high for all drugs and all methods.

Adrenal Cortex Hormones↗
PubMed1999

Detection of apoptotic cells in human colorectal cancer by two different in situ methods: antibody against single-stranded DNA and terminal deoxynucleotidyl transferase-mediated dUTP-biotin nick end-labeling (TUNEL) methods.

We comparatively investigated the extent of apoptotic cell loss in human colorectal cancers evaluated by two methods, namely the conventional terminal deoxynucleotidyl transferase (TdT)-mediated deoxyuridine triphosphate (dUTP)-biotin nick end-labeling (TUNEL) method and immunohistochemistry for single-stranded (ss) DNA. The apoptotic index (AI) obtained with the TUNEL method was higher than that shown by the immunohistochemistry for ssDNA. However, a significant correlation in AIs evaluated by these methods was found. The AIs obtained by both methods were significantly higher in the advanced cancers than in the early cancers. Cellular proliferation activity was assessed in terms of positivity rate (PR) for expression of proliferating cell nuclear antigen (PCNA). The PR of advanced cancers was significantly higher than that of early cancers. The present results indicate that immunohistochemistry for ssDNA is useful (as is the TUNEL method) for evaluation of apoptotic tumor cells in colorectal carcinomas. In addition, it was confirmed that there is a remarkable increase of not only proliferation activity, but also tumor cell apoptosis in the process of progression of colon cancer from early to advanced stages of the disease.

Adult↗
PubMed1983

Fibrinogen: a comparison of an immunoturbidimetric method with four conventional methods.

A rapid and simple immunochemical method for fibrinogen determination is described. The method is based on measuring the turbidity caused by antigen-antibody complexes with an enzyme analyser using diluted antiserum as a starting reagent. This immunoturbidimetric method correlates well with the immunodiffusion method and with two of the thrombin methods. Its correlation with the precipitation method according to Low was a little weaker.

Fibrinogen↗
PubMed1990

Prognostic value of ovarian carcinoma grading methods--a method comparison study.

The prognostic value of subjective histological and morphometric grading was studied in 75 primary ovarian carcinomas. Histological grading methods recommended by Czernobilsky and by Russell and the morphometric method of Baak and co-workers were compared in a two-observer system. The 5-year survival could be correctly predicted in about two-thirds of the patients with all three methods. When mitotic counting (volume corrected mitotic index, M/V-index) was compared with the above grading methods by using a receiver operating characteristic curve) the M/V-index was generally superior in its prognostic power regardless of the sensitivity/specificity level chosen. The morphometric grading method and the grading method based on the M/V index were also shown to be readily reproducible.

Carcinoma↗
PubMed1986

A comparison of graphical nomogram methods with a computerized Bayesian analysis method in the interpretation of serum phenytoin concentrations.

A study was performed to compare the predictability of a reported Bayesian graphical method, the drug nomogram used in the Bayesian Computer Method and the Driessen Nomogram with that of a computerized Bayesian analysis method in the interpretation of serum phenytoin concentrations. It was found that the results generated by the graphical method were similar to those of the computer with a mean prediction error of 3.9 mg/day in the dose to achieve a concentration at steady-state of 20 ml/l. Overall the results of the graphical method were less biased and had more precision with a significant improvement in relative precision (P less than 0.01) than the initial estimate or Driessen methods.

Adolescent↗
PubMed2005

Detection of delirium in the intensive care unit: comparison of confusion assessment method for the intensive care unit with confusion assessment method ratings.

OBJECTIVES: To compare the Confusion Assessment Method (CAM) and CAM for the Intensive Care Unit (CAM-ICU) methods for detecting delirium in alert, nonintubated older ICU patients. DESIGN: Comparison study. SETTING: Fourteen-bed medical ICU of an 800-bed university teaching hospital. PARTICIPANTS: Twenty-two patients aged 65 and older admitted to the ICU. MEASUREMENTS: Two blinded, trained clinician-researchers who had undergone interrater reliability testing interviewed patients separately, usually within 10 minutes of each other (up to 120 minutes). Each researcher examined patients for the four key CAM criteria: acuteness, inattention, disorganized thinking, and altered level of consciousness. One researcher used the CAM method with the Mini-Mental State Examination and Digit Span; the other researcher used the CAM-ICU method with nonverbal cognitive and attention tasks. RESULTS: Rates of delirium were 68% according to CAM and 50% according CAM-ICU. Comparing the two methods, agreement was 82%, with a kappa of 0.64. Using the CAM as the reference standard, the CAM-ICU had a sensitivity of 73% (95% confidence interval (CI)=60-86) and specificity of 100% (95% CI=56-100). There were four false-negative ratings using the CAM-ICU. Reasons for disparate results were that the CAM used more-detailed cognitive testing that detected more deficits (3 patients) and the time elapsed (90 minutes) between ratings in one patient with markedly fluctuating symptoms. CONCLUSION: CAM and CAM-ICU agreement was moderately high. Although the CAM-ICU is recommended for ICU patients because of its brevity and ease of use, the standard CAM method may detect more subtle cases of delirium in nonintubated, verbal ICU patients.

Aged↗
PubMed2004

Data extrapolation method for boundary element method-based near-field acoustical holography.

A new data extrapolation method for boundary element method (BEM)-based near-field acoustical holography (NAH) is proposed to reduce an error of the reconstructed result obtained from the pressure measured on an aperture small compared with the structure. The finiteness of the measurement aperture is a serious impediment to actual large-scale implementation of NAH, because NAH requires the measurement of the pressure field over a complete surface of structure. To eliminate the requirement, the wave number-space data extrapolation method for fast Fourier transform (FFT)-based NAH has been proposed. In this paper, the extension of this data extrapolation method to BEM-based NAH is presented. The effectiveness of this method is demonstrated by experiments. The experiment results confirm that the reconstruction error is sufficiently suppressed by the proposed method.

Journal Article↗