Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “HMM”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24Linked to original sources

Regulatory proteins alter nucleotide binding to acto-myosin of sliding filaments in motility assays.

The sliding speed of unregulated thin filaments in motility assays is only about half that of the unloaded shortening velocity of muscle fibers. The addition of regulatory proteins, troponin and tropomyosin, is known to increase the sliding speed of thin filaments in the in vitro motility assay. To learn if this effect is related to the rate of MgADP dissociation from the acto-S1 cross-bridge head, the effects of regulatory proteins on nucleotide binding and release in motility assays were measured in the presence and absence of regulatory proteins. The apparent affinity of acto-heavy meromyosin (acto-HMM) for MgATP was reduced by the presence of regulatory proteins. Similarly, the regulatory proteins increase the concentration of MgADP required to inhibit sliding. These results suggest that regulatory proteins either accelerate the rate of MgADP release from acto-HMM-MgADP or slow its binding to acto-HMM. The reduction of temperature also altered the relationship between thin filament sliding speed and the regulatory proteins. At lower temperatures, the regulatory proteins lost their ability to increase thin filament sliding speed above that of unregulated thin filaments. It is hypothesized that structural changes in the actin portion of the acto-myosin interface are induced by regulatory protein binding to actin.

Actins↗

Self-association of a high molecular weight subfragment-2 of myosin induced by divalent metal ions.

The effect of divalent cations on the self-association of high molecular weight subfragment-2 (long S-2) and low molecular weight subfragment-2 (short S-2) of rabbit skeletal muscle myosin has been investigated. In the presence of millimolar concentrations of Ca2+ or Mg2+ long S-2 associates at neutral pH to form ordered, high molecular weight aggregates whereas short S-2 does not associate. The association process is co-operative and results from binding two to four divalent cations within the light meromyosin-heavy meromyosin (LMM-HMM) hinge region of long S-2. Optical diffraction of electron micrographs of the long S-2 aggregates revealed several periodicities including reflections near 143 A. High molecular weight HMM showed a similar divalent metal induced self-association. Chymotryptic digestion studies of rod filaments reveal that cleavage within the LMM-HMM hinge is also strongly dependent on the presence of divalent cations. At pH 8, in the absence of divalent cations, the S-2 region appears to be displaced away from the filament backbone resulting in rapid proteolysis in the hinge domain. At high cation concentrations (greater than 10 mM) proteolytic cleavage is suppressed. A similar depression of the (substantially lower) hinge cleavage rate was also observed at neutral pH following addition of these divalent metal ions. Results suggest that binding of Mg2+ within the hinge domain under physiological conditions may act to lock the cross-bridge onto the thick filament surface in its resting-state orientation.

Allosteric Regulation↗

Fate of the light chains in the course of proteolytic digestion of rabbit fast skeletal myosin.

During proteolytic digestion of myosin to prepare HMM or HMM-S-1 subfragments, myosin light chains are affected variously according to experimental conditions. In the presence of Ca2+ at low ionic strength trypsin rapidly degrades the DTNB light chain to a 18 K peptide. This new DTNB light chain is compared to a DTNB (17K) light chain obtained by chymotryptic digestion under similar conditions as shown here and in parallel studies. (Weeds and Pope (1977), J. Mol. Biol, 111, 129--157). Whereas the chymotryptic DTNB (17K) has lost its phosphorylation site (Ser-15), tryptic DTNB (18K) has lost only a strongly basic N-terminal peptide. A transitory (ca 14K) fragment is formed when digestion occurs in the presence of EDTA. A-1 light chain (20.7K) is cut to form a 20K species when myosin (of (CT)-HMM obtained ina high ionic strength medium) is digested with trypsin whether Me2+ is present or not. The new formed species has also lost its strongly basic N-terminal peptide and assumes a primary structure closer to that of A-2. Chymotrypsin was shown to have no effect on the A-1 light chain under the present conditions, whereas A-2 is not affected by chymotrypsin or trypsin under any of the conditions described in the present study.

Animals↗

A conserved negatively charged amino acid modulates function in human nonmuscle myosin IIA.

A myosin surface loop (amino acids 391-404) is postulated to be an important actin binding site. In human beta-cardiac myosin, mutation of arginine-403 to a glutamine or a tryptophan causes hypertrophic cardiomyopathy. There is a phosphorylatable serine or threonine residue present on this loop in some lower eukaryotic myosin class I and myosin class VI molecules. Phosphorylation of the myosin I molecules at this site regulates their enzymatic activity. In almost all other myosins, the homologous residue is either a glutamine or an aspartate, suggesting that a negative charge at this location is important for activity. To study the function of this loop, we have used site-directed mutagenesis and baculovirus expression of a heavy meromyosin- (HMM-) like fragment of human nonmuscle myosin IIA. An R393Q mutation (equivalent to the R403Q mutation in human beta-cardiac muscle myosin) has essentially no effect on the actin-activated MgATPase or in vitro motility of the expressed HMM-like fragment. Three mutations, D399K, D399A, and a deletion mutation that removes residues 393-402, all decrease both the V(max) of the actin-activated MgATPase by 8-10-fold and the rate of in vitro motility by a factor of 2-3. The K(ATPase) of the actin-activated MgATPase activity and the affinity constant for binding of HMM to actin in the presence of ADP are affected by less than a factor of 2. These data support an important role for the negative charge at this location but show that it is not critical to enzymatic activity.

Actins↗

Proximity relationships and structural dynamics of the phalloidin binding site of actin filaments in solution and on single actin filaments on heavy meromyosin.

Distance relationships between phalloidin binding sites on F-actin have been investigated using fluorescence resonance energy transfer (FRET) techniques in solution and on single F-actin filaments bound to heavy meromyosin (HMM). Filaments saturated with an equimolar concentration of fluoresceinisothiocyanatophalloidin (FITC-ph) as the donor and tetramethylrhodamineisothiocyanatophalloidin (TRITC-ph) as the acceptor and control filaments saturated with either FITC-ph or TRITC-ph were characterized by absorption and fluorescence spectroscopy and the in vitro motility assay. Fluorescence excitation polarization spectroscopy showed hetero-FRET occurred within colabeled filaments, whereas homo-FRET was observed in control filaments. The distance measured between adjacent phalloidin binding sites using randomly labeled FITC-ph and TRITC-ph was 37.2 A using steady-state spectral analysis and 36.9 A using time-resolved spectroscopy with a radial coordinate of 14.5 A. Measurements of the distance between fluorescent phalloidin groups using the atomic model of F-actin [Lorenz, M., Popp, D., & Holmes, K. C. (1993) J. Mol. Biol. 234, 826-836] suggest transfer occurs between adjacent phalloidin molecules on opposite actin helices (39 A), rather than between adjacent phalloidins along the same actin helix (55.4 A). A quantitative fluorescence microscope technique was described that measures the proximity of adjacent FITC-ph and TRITC-ph on single filaments immobilized on HMM. Here a distance of 36.2 A was calculated which was unchanged during ATP-dependent sliding of F-actin on HMM. Spatially resolved FRET measurements are being used to observe the effects of actin binding proteins on the structural properties along the length of single actin filaments.

Actins↗

Modulation of the actin-activated adenosinetriphosphatase activity of myosin by tropomyosin from vascular and gizzard smooth muscles.

Tropomyosins from bovine aorta and pulmonary artery exhibit identical electrophoretic patterns in sodium dodecyl sulfate but differ from tropomyosins of either chicken gizzard or rabbit skeletal muscle. Each of the four tropomyosins binds readily to skeletal muscle F-actin as indicated by their sedimentation with actin and by their ability to maximally stimulate or inhibit actin-activated ATPase activity at a molar ratio of one tropomyosin per seven actin monomers. Smooth and skeletal muscle tropomyosins differ in their effects on activity of skeletal myosin or heavy meromyosin (HMM); the former can enhance activity under conditions in which the latter inhibits. Gizzard and arterial tropomyosins are usually equally effective in stimulating ATPase activity of skeletal acto-HMM, but at high concentrations of Mg2+ gizzard tropomyosin is more effective, a result that cannot be attributed to differences in the binding of the two tropomyosins to F-actin. The effects of tropomyosin also depend on the type of myosin; tropomyosin enhances activity of gizzard myosin under conditions in which it inhibits that of skeletal myosin. Increasing the pH or the Mg2+ concentration can reverse the effect of tropomyosin on actin-stimulated ATPase activity of skeletal HMM from activation to inhibition, but this reversal is not found with gizzard myosin. Activity in the absence of tropomyosin is independent of pH, and the loss of activation with increasing pH is not accompanied by loss of binding of tropomyosin to actin.

Actins↗

Intermediate oxygen exchange catalyzed by the actin-activated skeletal myosin adenosinetriphosphatase.

Considerable effort has been devoted to understanding the mechanism of 18O exchange in skinned skeletal and insect muscle fibers. However, a full understanding of the mechanism of 18O exchange in muscle fibers requires an understanding of the mechanism of 18O exchange in the simpler in vitro systems employing myosin subfragment 1 (S-1) and heavy meromyosin (HMM). In the present study, using both S-1 and S-1 covalently cross-linked to actin, we show first that over a wide range of temperature, ionic strength, and actin concentration there is only one pathway of 18O exchange with S-1. This is also the case with HMM except at very low ionic strength and low actin concentration, and even here, the data can be explained if 20% of the HMM is denatured in such a way that it shows no 18O exchange. Our results also show that actin markedly decreases the rate of 18O exchange. If it is assumed that Pi release is rate limiting, the four-state kinetic model of the actomyosin ATPase cannot fit these 18O exchange data. However, if it is assumed that the ATP hydrolysis step is rate limiting and Pi release is very fast, the four-state kinetic model can qualitatively fit these data although the fit is not perfect. A better fit to the 18O exchange data can be obtained with the six-state kinetic model of the actomyosin ATPase, but this fit requires the assumption that, at saturating actin concentration, the rate of Pi rotation is about 9-fold slower than the rate of reversal of the ATP hydrolysis step.

Actins↗

Spin-echo 1H NMR studies of differential mobility in gizzard myosin and its subfragments.

The unexpectedly narrow resonances in the 1H NMR spectra of gizzard myosin, heavy meromyosin, and subfragment 1 were examined by spin-echo NMR spectroscopy. These resonances originated predominantly in the myosin heads, or subfragment 1 units. Smooth muscle myosin undergoes a dramatic change in hydrodynamic properties and can exist either as a folded (10S) or as an extended (6S) species. Factors that influence this transition, namely, ionic strength and phosphorylation (or thiophosphorylation), were varied in the NMR experiments. T2 relaxation experiments on dephosphorylated myosin indicated several components of different relaxation times that were not influenced by changes in ionic strength. Our experiments focused on the components with longer relaxation times, i.e., corresponding to nuclei with more mobility, and these were observed selectively in a spin-echo experiment. With dephosphorylated myosin and HMM, increases in ionic strength caused an increased intensity in several of the narrower resonances. The ionic strength dependence of these changes paralleled that for the 10S to 6S transition. With thiophosphorylated myosin and HMM, changes in ionic strength also influenced the intensities of the narrower resonances, and in addition changes in the 1H NMR spectrum due to thiophosphorylation were observed. The narrow resonances seen with myosin and HMM were observed with S1, but the spin-echo spectra of S1 were not influenced either by changes in ionic strength or by phosphorylation. These results suggest that a fraction of the 1H resonances in smooth muscle myosin and its fragments originates from both aliphatic and aromatic residues of increased mobility compared to the mobility expected from hydrodynamic properties of these proteins. In general, the intensities of these residues increase with increasing ionic strength, and this is consistent with an increase in the percentage of mobile residues during the 10S to 6S transition. Segmental flexibility appeared also to be influenced by phosphorylation within the 6S conformation. These changes were not detected in the isolated myosin heads and thus required a higher order of structure, either the subfragment 2 region or the interaction of myosin heads.

Animals↗

Binding of heavy meromyosin and subfragment-1 to thin filaments in myofibrils and single muscle fibers.

The binding of fluorescently labeled heavy meromyosin (HMM) and heavy meromyosin subfragment-1 (S-1) to thin filaments of myofibrils and of rabbit psoas muscle fibers was measured under conditions of rigor and contraction. The fragments diffused rapidly into the myofibrillar space and bound specifically to the thin filaments. The fragments bound strongest and in a uniform fashion to myofibrils in which the competition from indigenous myosin was abolished by removing it with Hasselbach-Schneider solution. Under these conditions, the rigor Ka values for HMM and S-1 were 1.5 x 10(6) M-1 and 4.8 x 10(4) M-1, respectively. The stoichiometry of binding was measured by independently estimating the concentration of actin sites. S-1 was found to be capable of saturating all available actin sites in a myofibril or a fiber, but HMM could only occupy 50% of the sites.

Actins↗

Interaction of myosin subfragments with F-actin.

The effect of ionic strength, temperature, and divalent cations on the association of myosin with actin was determined in the ultracentrifuge using scanning absorption optics. The association constant (Ka) for the binding of heavy meromyosin (HmM) to F-actin was 1 X 10(7) M-1 at 20 degrees C, in 0.10 M KCl, 0.01 M imidazole (pH 7.0), 5 MM potassium phosphate, 1 mM MgCl2, and 0.3 mM ethylene glycol bis(beta-aminoethyl ether)-N,N'-tetraacetic acid. Ka was the same for HMM prepared by trypsin or chymotrypsin. The affinity of subfragment 1 (S1) for actin under the same ionic conditions was 3 X 10(6) M-1. Varying the preparative procedure for S1 had little effect on Ka. The small difference in binding energy between HMM and S1 suggests that either only one head can bind strongly to actin at a time or that free energy is lost during the sterically unfavorable attachment of the two heads to actin.

Actins↗

Reexamination of the conformation of muscle proteins by optical activity.

The circular dichroism and optical rotatory dispersion of muscle proteins are reexamined. By the method of Chen et al. (Chen, Y.H., Yang, J.T., and Chau, K.H. (1974), Biochemistry 13, 3350), the estimated helical contents of myosin (78%), heavy meromyosin (HMM) (70%) subfragment 1 (SF-1) (60%), and G-actin (45%) are higher than hitherto reported. Tropomyosin (TM) and light meromyosin fraction I (LMM Fr. I) possess more than 90% helix in agreement with the values based on the bo method. HMM, SF-1, and G-actin also contain about 8, 16, and 27% beta form. The three troponins (TN) and three light chains (LC) of myosin have moderate amounts of helices (29 to 51%) and some beta form (13 to 23%). If the light chains are intact in HMM and SF-1, myosin would have 3-5% beta form, which is difficult to detect with the present method. For comparison, the predictive method based on amino acid sequence gives similar estimates for TM, G-actin, and TN-C with bound calcium, but slightly higher helical contents than our results for TN-I and the light chains.

Actins↗

Interactions and properties of smooth muscle myosin phosphatase.

Interactions of the type 1 phosphatase catalytic subunit (PP1c) and the myosin phosphatase holoenzyme (MBP) were compared using affinity columns. In the absence of ATP, MBP bound to dephosphorylated myosin, heavy meromyosin (HMM), and subfragment 1. In contrast, PP1c was not bound. In the presence of ATP, the binding of MBP occurred only with phosphorylated protein. The interaction of MBP with phosphorylated proteins also was demonstrated using thiophosphorylated proteins as competitive inhibitors. Kinetics parameters were determined. With phosphorylated light chains (P-LC20), the major difference between PP1c and MBP was a lower K(m) for the latter. With myosin, MBP showed a marked increase in kcat, compared to PP1c. ATP did not affect these parameters. To investigate the role of the large phosphatase subunit, two recombinant proteins representing the N-terminal two-thirds of the molecule were expressed. These activated PP1c, and activation was maximum at approximately an equimolar ratio. The equimolar mixture of recombinant fragment and PP1c exhibited K(m) values similar to MBP and increased kcat values, compared to PP1c alone. An affinity column was prepared using the recombinant fragment. Phosphorylated HMM and P-LC20 were bound in the presence and absence of ATP. The interaction of P-LC20 was not ATP-dependent. Dephosphorylated HMM did not bind in the presence of ATP. The N-terminal fragment of the large subunit also contained a binding site for PP1c. These results indicate that the N-terminal portion of the large subunit of MBP contained binding sites for P-LC20 and PP1c.

Adenosine Triphosphate↗

Modulation of actin conformation and inhibition of actin filament velocity by calponin.

Calponin, an actin/calmodulin-binding protein present in smooth muscle thin filaments, modulates the actin-myosin interaction and actomyosin ATPase activity of smooth muscle myosin II. Binding of myosin heads to actin under conditions that produce weak or strong binding induces conformational changes in actin. Polarized fluorimetric measurements of rhodamine-phalloidin complex and 1,5-IAEDANS specifically linked to actin in myosin-free muscle fibers (ghost fibers) and to Cys-707 in myosin head, respectively, revealed conformational changes, as determined from the changes in orientation and mobility of fluorescent probes, upon addition of calponin to ghost fibers. The effect of calponin on conformational changes produced upon binding of phosphorylated or dephosphorylated heavy meromyosin (HMM) was also determined. Subfragment-1 preparation modified with NEM (NEM-S1) or pPDM (pPDM-S1) were used as models of strong and weak binding, respectively. Calponin changed both the orientation of fluorophores on the actin and the flexibility of the actin filaments, as determined from the angle between an actin filament and the fiber axis. Changes in the flexibility of actin filaments and the orientation of fluorophores produced by phosphorylated smooth muscle HMM were similar to those seen with NEM-S1, which formed a strong-binding association with actin and caused the transition of actin monomers to the "on" state; calponin markedly inhibited this effect. In contrast, pPDM-S1 and dephosphorylated HMM induced weak binding and the transition of actin monomers to the "of" state, and these effects were enhanced by calponin. Furthermore, calponin decreased the velocity of actin filament movement over skeletal muscle myosin O gamma phosphorylated smooth muscle myosin heads in an in vitro motility assay. These results suggest that calponin induces modulation of smooth muscle contraction by inhibiting the force-producing (strong-binding) state of cross-bridges and involves changes in actin conformation.

Actins↗

Flexibility of Acanthamoeba myosin rod minifilaments.

Previous electric birefringence experiments have shown that the actin-activated Mg2+-ATPase activity of Acanthamoeba myosin II correlates with the ability of minifilaments to cycle between flexible and stiff conformations. The cooperative transition between conformations was shown to depend on Mg2+ concentration, on ATP binding, and on the state of phosphorylation of three serines in the C-terminal end of the heavy chains. Since the junction between the heavy meromyosin (HMM) and light meromyosin (LMM) regions is expected to disrupt the alpha-helical coiled-coil structure of the rod, this region was anticipated to be the flexible site. We have now cloned and expressed the wild-type rod (residues 849-1509 of the full-length heavy chain) and rods mutated within the junction in order to test this. The sedimentation and electric birefringence properties of minifilaments formed by rods and by native myosin II are strikingly similar. In particular, the Mg2+-dependent flexible-to-stiff transitions of native myosin II and wild-type rod minifilaments are virtually superimposable. Mutations within the junction between the HMM and LMM regions of the rod modulate the ability of Mg2+ to stabilize the stiff conformation. Less Mg2+ is required to induce minifilament stiffening if proline-1244 is replaced with alanine. Deleting the entire junction region (25 amino acids) results in a even greater decrease in the Mg2+ concentration necessary for the transition. The HMM-LMM junction does indeed seem to act as a Mg2+-dependent flexible hinge.

Acanthamoeba↗

Protein-protein interaction conferring stability to an extracellular acetyl (xylan) esterase produced by Termitomyces clypeatus.

Acetyl esterase (AE) activity present in the culture filtrate of Termitomyces clypeatus was separated into lower molar mass (LMM) and higher molar mass (HMM) protein fractions during BioGel P-200 gel chromatography. AE was purified as a 30 kDa nonglycosylated protein from LMM fractions by CM-Sepharose ion exchange chromatography and HPGPLC. Although the HMM fraction had a number of enzyme activities (sucrase, beta-xylosidase, beta-glucosidase, and alpha-L-arabinofuranosidase) other than AE, protein present in the fraction was eluted as a single protein peak in HPGPLC and gave a single band in native PAGE. The fraction, subsequently purified by DEAE-Sephadex chromatography, was a SDS-PAGE homogeneous 80 kDa glycoprotein, but with both AE and cellobiase activities. The aggregate dissociated during ConA-Sepharose chromatography and 30 kDa AE and 56 kDa glycosylated cellobiase were purified separately. The dissociation caused significant loss of cellobiase activity but not that of AE. AE purified from both HMM and LMM fractions was characterized to be the same enzyme in terms of molar masses, pI (7.3), and other physicochemical properties. AE as an aggregate with cellobiase showed higher thermostability, temperature optimum, and resistance toward chemical denaturants than those of purified AE. Compared to cellobiase purified earlier from the same fungus, the enzyme present with AE in the aggregate also showed higher catalytic activity, thermostability, and temperature optimum. The study indicated that the formation of such SDS-resistant enzyme aggregate was associated with significant changes in the physicochemical properties of the enzymes, mainly toward improvement of rigidity of enzymes, and sometimes with the improvement of catalytic activity.

Acetylesterase↗

Uniquely stable 40 kDa subfragment-2 in carp myosin.

Digestion of carp myofibrils at 30 degrees C in 0.5 M KCl medium with calcium ion generated unique 135 kDa heavy meromyosin (HMM). The HMM was not produced when digested at 10 degrees C. A further digestion of the 135 kD HMM isolated in the absence of calcium ion generated uniquely short subfragment-2 (S-2) with a size of 40 kDa (40 kDa S-2) together with subfragment-1 (S-1). The 40 kDa S-2 was identified by N- and C-end sequencing, and demonstrated to locate the amino end of the rod portion. The unfolding temperature for the 40 kDa S-2 was around 52 degrees C as studied by circular dichroism measurement. The same unfolding peak was also detected with the intact rod together with a large unfolding peak at around 36 degrees C coming from the rest of the rod portion, light meromyosin. The unfolding peak for the 40 kDa S-2 in myosin was a little lower (48 degrees C) than that in free form, suggesting the involvement of the head portion in the stability of the 40 kDa S-2 in the structure.

Animals↗

Evaluation of the pharmacological activity of the major mexiletine metabolites on skeletal muscle sodium currents.

BACKGROUND AND PURPOSE: Mexiletine (Mex), an orally effective antiarrhythmic agent used to treat ventricular arrhythmias, has also been found to be effective for myotonia and neuropathic pain. It is extensively metabolized in humans but little information exists about the pharmacodynamic properties of its metabolites. EXPERIMENTAL APPROACH: To determine their contribution to the clinical activity of Mex, p-hydroxy-mexiletine (PHM), hydroxy-methyl-mexiletine (HMM), N-hydroxy-mexiletine (NHM) (phase I reaction products) and N-carbonyloxy beta-D-glucuronide (NMG) (phase II reaction product) were tested on sodium currents (I(Na)) of frog skeletal muscle fibres. Sodium currents were elicited with depolarizing pulses from different holding potentials (HP=-140, -100, -70 mV) and stimulation frequencies (0.25, 0.5, 1, 2, 5, 10 Hz) using the vaseline-gap voltage-clamp method. KEY RESULTS: All the hydroxylated derivatives blocked the sodium channel in a voltage- and use-dependent manner. The PHM, HMM and NHM metabolites were up to 10-fold less effective than the parent compound. However, HMM showed a greater use-dependent behaviour (10 Hz), compared to Mex and the other metabolites. Similar to Mex, these products behaved as inactivating channel blockers. Conjugation with glucuronic acid (NMG) resulted in almost complete abolition of the pharmacological activity of the parent compound. CONCLUSIONS AND IMPLICATIONS: Thus, although less potent, the phase I metabolites tested demonstrated similar pharmacological behaviour to Mex and might contribute to its clinical profile.

Animals↗

Relocalized redox-active lysosomal iron is an important mediator of oxidative-stress-induced DNA damage.

Oxidative damage to nuclear DNA is known to involve site-specific Fenton-type chemistry catalysed by redox-active iron or copper in the immediate vicinity of DNA. However, the presence of transition metals in the nucleus has not been shown convincingly. Recently, it was proposed that a major part of the cellular pool of loose iron is confined within the acidic vacuolar compartment [Yu, Persson, Eaton and Brunk (2003) Free Radical Biol. Med. 34, 1243-1252; Persson, Yu, Tirosh, Eaton and Brunk (2003) Free Radical Biol. Med. 34, 1295-1305]. Consequently, rupture of secondary lysosomes, as well as subsequent relocation of labile iron to the nucleus, could be an important intermediary step in the generation of oxidative damage to DNA. To test this concept we employed the potent iron chelator DFO (desferrioxamine) conjugated with starch to form an HMM-DFO (high-molecular-mass DFO complex). The HMM-DFO complex will enter cells only via fluid-phase endocytosis and remain within the acidic vacuolar compartment, thereby chelating redox-active iron exclusively inside the endosomal/lysosomal compartment. Both free DFO and HMM-DFO equally protected lysosomal-membrane integrity against H2O2-induced oxidative disruption. More importantly, both forms of DFO prevented H2O2-induced strand breaks in nuclear DNA, including telomeres. To exclude the possibility that lysosomal hydrolases, rather than iron, caused the observed DNA damage, limited lysosomal rupture was induced using the lysosomotropic detergent O-methyl-serine dodecylamine hydrochloride; subsequently, hardly any DNA damage was found. These observations suggest that rapid oxidative damage to cellular DNA is minimal in the absence of redox-active iron and that oxidant-mediated DNA damage, observed in normal cells, is mainly derived from intralysosomal iron translocated to the nucleus after lysosomal rupture.

DNA Damage↗