Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “ELASTICITY”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24Linked to original sources
PubMed1993

Quantitative analysis of elastic recoil after balloon angioplasty and after intracoronary implantation of balloon-expandable Palmaz-Schatz stents.

OBJECTIVES: The purpose of this study was to measure elastic recoil from sequential angiograms after balloon angioplasty and after implantation of a balloon-expandable Palmaz-Schatz stent in the same patient, and to compare the results with the late angiographic outcome. BACKGROUND: The immediate result of coronary balloon angioplasty is influenced by plastic deformation, primarily of the atherosclerotic plaque, and by elastic recoil, primarily of the less or nondiseased vessel circumference. METHODS: The extent of elastic recoil was measured quantitatively as the difference between maximal balloon size and the resulting vessel diameter or cross-sectional area. RESULTS: Analysis was performed in 60 patients who received a single stent for late restenosis after initially successful coronary balloon angioplasty. Minimal lumen diameter (minimal cross-sectional area) was 0.98 +/- 0.43 mm (0.97 +/- 0.67 mm2) before balloon angioplasty, 2.06 +/- 0.36 mm (3.68 +/- 1.17 mm2) after angioplasty (both p < 0.001 vs. values before angioplasty) and 2.98 +/- 0.26 mm (7.12 +/- 1.28 mm2) after stenting (both p < 0.001 vs. postangioplasty results). No significant changes in vessel reference diameters or areas were measured. Mean balloon/artery ratios were similar in both procedures, ranging from 0.93 to 0.96. The calculated mean elastic recoil was 0.98 +/- 0.50 mm in diameter (31%) and 3.67 +/- 2.05 mm2 in area (48%) after balloon angioplasty compared with 0.10 +/- 0.07 mm (3.5%) and 0.38 +/- 0.36 mm2 (5.1%) after stenting. Increasing balloon sizes induced increased vessel stretch, which was followed by increased elastic recoil in the angioplasty group in contrast to the stenting group. Short, noncalcified and eccentric lesions tend to be associated with increased recoil after balloon angioplasty. Overdilation or underdilation in one of the procedures, changes in postprocedural vasomotion or postprocedural thrombus formation was not responsible for this outcome. After 6 months mean minimal lumen diameter was 2.39 +/- 0.58 mm, suggesting a mean hyperplasia of 0.59 +/- 0.51 mm. Twelve patients (20%) had a follow-up diameter that was equal to or less than the mean postangioplasty result and eight patients (14%) had a diameter stenosis of > 50%. CONCLUSIONS: The implantation of a Palmaz-Schatz stent almost completely eliminates the decrease in vessel dimensions caused by elastic recoil and therefore diminishes the impact of hyperplasia and reduces the rate of restenosis.

Adult↗
PubMed1994

Ultraviolet-B irradiation deforms the configuration of elastic fibers during the induction of actinic elastosis in rats.

We used scanning electron microscopy combined with perfusion fixation, resin injection and a selective digestion procedure to determine the effects of ultraviolet-B (UVB) radiation on the three-dimensional architecture of elastic fibers of rat skin. Chronic irradiation with a suberythematous dose of UVB (3 times/week for 12 weeks) produced a tortuous deformation of the superficial elastic fibers in the skin of the rat sole which normally are linearly arranged. Using computer analysis, we evaluated 40 individuals elastic fibers every 3 weeks for 12 weeks following the irradiation. This procedure confirmed the increasing tortuosity of the fibers, which was related to a decline in the elastic property of the skin in situ. Fine elastic branches developed among the deformed fibers and eventually anastomosed to produce an irregular network in the superficial dermal connective tissue, which may correspond to the development of actinic elastosis, that is, the UV-related accumulation of elastic fiber material.

Animals↗
PubMed2006

Identification of elastic fibers and lamellae in porcine pericardium and aorta by confocal, fluorescence and polarized light microscopy.

Pericardial connective tissue has been used to construct bioprostheses to repair various types of injuries, including aortic wall repairs. The arrangement and the distribution of elastic and collagen staple fibers are related directly to the biomechanical properties of the tissue and thus determine the choice tissue for the construction of bioprostheses. Although elastic fibers can be visualized using several histochemical methods, the specificity and mechanism of binding involved remain to be clarified. In this work, we compared the elastic net of the porcine pericardial matrix with that of the aortic wall using 1-anilino-8-naphthalene sulfonate (ANS) and dansyl chloride (DCl) as fluorescent probes and the permanganate-bisulfite-toluidine (PBT) method. Polarized light and fluorescence microscopy were simultaneously used to analyze the tissues. Some samples also were examined using confocal microscopy. Aorta and pericardium treated with ANS and DCl showed elastic fibers and lamellae with an intense blue fluorescence. When stained with the PBT method, the aortic elastic lamellae were clearly metachromatic and, under polarized light, they showed a greenish birefringence. DCl provided clearer fluorescent labelling of elastic fibers when examined using confocal microscopy.

Anilino Naphthalenesulfonates↗
PubMed2004

Prediction of composite elastic modulus and polymerization shrinkage by computational micromechanics.

OBJECTIVES: The objective of this study was to simulate the elastic modulus and polymerization shrinkage of a light activated polymer matrix composite using a generalized method of cells (GMC) micromechanics model. Two hypotheses were tested: (1) the micromechanics model provides estimates of elastic modulus vs filler fraction with greater accuracy than the rule of mixtures, Hashin-Shtrikman and phenomenological models; (2) Micromechanics Analysis Code/Generalized Method of Cells accurately simulates experimental benchmarks of polymerization shrinkage strain. METHODS: The study applied mathematical algorithms to a representative volume element of a model polymer composite to yield value estimates of the elastic modulus and contraction strain. Mechanical properties of the composite constituents were derived from thermomechanical and dynamic mechanical analysis of BisGMA and TEGDMA filled and unfilled resins. Data from the micromechanics model were compared to results of other analytical methods as well as experimental benchmarks. RESULTS: Predictions of elastic modulus vs filler fraction from the micromechanics model provided greater accuracy than the rule of mixtures and the Hashin-Shtrikman models. Predictions of polymerization shrinkage strain were within 13% of experimental values. SIGNIFICANCE: The elastic micromechanics model presented accurately predicted elastic modulus and polymerization shrinkage strain as a function of filler fraction, superior to other analytical methods.

Bisphenol A-Glycidyl Methacrylate↗
PubMed2005

Effect of cross-sectional design on the modulus of elasticity and toughness of fiber-reinforced composite materials.

STATEMENT OF PROBLEM: Many current fabrication protocols for dental fiber-reinforced composites use hand lay-up techniques and technician design input. Little information exists regarding how the manipulation of the cross-sectional design of a prosthesis might affect the modulus of elasticity and toughness. PURPOSE: The aim of this study was to determine the effect of simple and complex cross-sectional designs on the modulus of elasticity and toughness of fiber-reinforced composite used for dental prostheses. MATERIAL AND METHODS: Two particulate composites (BelleGlass HP and Targis) were reinforced with ultra-high-molecular-weight polyethylene fiber ribbon (Connect), woven E-glass fibers (Vectris Frame), or unidirectional R-glass fibers (Vectris Pontic). A range of fiber positions, orientations, or geometries were incorporated into the rhombic specimens (2 x 2 x 25 mm(3)) to achieve simple and complex experimental cross-sectional designs. The control specimen did not contain fiber reinforcement. Specimens (n=6) were stored 1 week in distilled water at 37 degrees C prior to 3-point load testing to determine the modulus of elasticity (GPa) and toughness (MPa). The data within each main fiber group were subjected to 1-way analysis of variance and a Tukey post hoc test (alpha=.05). Cross-sections of randomly selected test specimens (n=2) were made for scanning electron microscope (SEM) analysis of the fiber distribution. RESULTS: The mean modulus of elasticity varied from 8.7 +/- 2.0 GPa (Targis control) to 21.6 +/- 1.4 GPa (2 unidirectional glass fiber reinforcements, 1 each at the tension side and the compression side). Mean toughness varied from 0.07 +/- 0.02 MPa (unidirectional glass fiber positioned at the compression side) as the lowest mean, to 4.53 +/- 0.89 MPa (unidirectional glass fiber positioned at the tension side) as the highest. Significant differences were identified between specimen groups in each main category (all groups P<.001, except modulus of elasticity of the woven E-glass groups, where P=.003). SEM micrographs showed fiber distribution in the cross section of test specimens to correspond with the intended fiber geometry. CONCLUSION: The modulus of elasticity of the composite specimens increased when 1 or more glass fiber groups were located at the compression side of the specimen. Toughness was most effectively increased when 1 or more fiber groups were located at the tension side of the specimen.

Analysis of Variance↗
PubMed1989

Elasticity of the human red cell membrane skeleton. Effects of temperature and denaturants.

The molecular basis for the elasticity of the human erythrocyte membrane was explored. Skeletons were released from ghosts in Triton X-100 and their dimensions followed by dark-field microscopy and packed volume. The rest size of skeletons was assumed to reflect the balance point between expansion (deformation) driven by electrostatic repulsions among the excess of fixed negative charges on the proteins and contraction (recovery) driven by their elasticity. The size of skeletons decreased with increasing temperature. This finding suggests that entropy drives elasticity. The requisite entropy change could be associated with either the configurational freedom of flexible protein chains or with the solvation of side chains exposed during protein dissociation (hydrophobic effects). To distinguish between these two alternatives, we tested the impact of two weak denaturants, 10% ethanol and 20 nM lithium 3,5-diiodosalicylate. Both agents reversibly promoted the expansion of skeletons, presumably by reducing their elasticity. Since the conformation of random coils and globular proteins should not be significantly altered by these mild treatments, this finding strongly suggests a role for weak interdomain and/or interprotein associations. We conclude that the elasticity of the red cell membrane skeleton may not derive from the configurational entropy of flexible coils. Rather, the elastic energy may arise from reversible dissociations of weak but specific intramolecular and/or intermolecular contacts, presumably within deformed spectrin filaments.

Detergents↗
PubMed2001

Model-based estimation of male urethral resistance and elasticity using pressure-flow data.

To assess urethral resistance and changes in the urethral elasticity during voiding, a lumped parameter model of the urethra was developed. The model uses pressure and flow measurements to estimate time-dependent resistance and elasticity factor. The model includes a resistance that has a function of the cross-section and urethral elasticity. Two resistivity types are compared in the constricted flow-controlling zone of the urethra: Poiseouille resistance and the Bernoulli effect. Using real pressure-flow data sets, the model was used to estimate urethral resistance and changes in urethral elasticity during voiding. Estimation of the elasticity show that in a normal patient relaxation of the urethra is a process that continues until the end of voiding. This has important implications with regard to the present methods that are used in the clinic to assess urethral obstruction or constriction. The resistance as calculated by this model, may be a useful indicator of urethral constriction and obstruction, since it is especially independent of the bladder function. Changes in the urethral elasticity during voiding which are estimated by the model add a new diagnostic parameter to pressure-flow studies.

Algorithms↗
PubMed2004

Comparison of the elastic and yield properties of human femoral trabecular and cortical bone tissue.

The ability to determine trabecular bone tissue elastic and failure properties has biological and clinical importance. To date, trabecular tissue yield strains remain unknown due to experimental difficulties, and elastic moduli studies have reported controversial results. We hypothesized that the elastic and tensile and compressive yield properties of trabecular tissue are similar to those of cortical tissue. Effective tissue modulus and yield strains were calibrated for cadaveric human femoral neck specimens taken from 11 donors, using a combination of apparent-level mechanical testing and specimen-specific, high-resolution, nonlinear finite element modeling. The trabecular tissue properties were then compared to measured elastic modulus and tensile yield strain of human femoral diaphyseal cortical bone specimens obtained from a similar cohort of 34 donors. Cortical tissue properties were obtained by statistically eliminating the effects of vascular porosity. Results indicated that mean elastic modulus was 10% lower (p<0.05) for the trabecular tissue (18.0+/-2.8 GPa) than for the cortical tissue (19.9+/-1.8 GPa), and the 0.2% offset tensile yield strain was 15% lower for the trabecular tissue (0.62+/-0.04% vs. 0.73+/-0.05%, p<0.001). The tensile-compressive yield strength asymmetry for the trabecular tissue, 0.62 on average, was similar to values reported in the literature for cortical bone. We conclude that while the elastic modulus and yield strains for trabecular tissue are just slightly lower than those of cortical tissue, because of the cumulative effect of these differences, tissue strength is about 25% greater for cortical bone.

Aged↗
PubMed1999

The role of an effective isotropic tissue modulus in the elastic properties of cancellous bone.

Conceptually, the elastic characteristics of cancellous bone could be predicted directly from the trabecular morphology--or architecture--and by the elastic properties of the tissue itself. Although hardly any experimental evidence exists, it is often implicitly assumed that tissue anisotropy has a negligible effect on the apparent elastic properties of cancellous bone. The question addressed in this paper is whether this is actually true. If it is, then micromechanical finite element analysis (micro-FEA) models, representing trabecular architecture, using an 'effective isotropic tissue modulus' should be able to predict apparent elastic properties of cancellous bone. To test this, accurate multi-axial compressive mechanical tests of 29 whale bone specimens were simulated with specimen-specific micro-FEA computer models built from true three-dimensional reconstructions. By scaling the micro-FEA predictions by a constant tissue modulus, 92% of the variation of Young's moduli determined experimentally could be explained. The correlation even increased to 95% when the micro-FEA moduli were scaled to the isotropic tissue moduli of individual specimens. Excellent agreement was also found in the elastic symmetry axes and anisotropy ratios. The prediction of Poisson's ratios was somewhat less precise at 85% correlation. The results support the hypothesis; for practical purposes, the concept of an 'effective isotropic tissue modulus' concept is a viable one. They also suggest that the value of such a modulus for individual cases might be inferred from the average tissue density, hence the degree of mineralization. Future studies must clarify how specific the tissue modulus should be for different types of bone if adequate predictions of elastic behavior are to be made in this way.

Animals↗
PubMed2001

Dynamic elastic modulus of 'packable' composites.

OBJECTIVE: A new type of so-called 'packable', 'condensable' or 'mouldable' composite has been developed and aims at replacing amalgam for posterior restorations. The purpose of the present investigation was to study the dynamic elastic modulus of 12 packable composites, and to follow the evolution of this property following prolonged water absorption. METHODS: Of each material ten rectangular samples (1.5x5x35 mm) were prepared. The elastic modulus (GPa) of each sample was determined with a non-destructive dynamic method using a Grindo-Sonic after 24 h of dry storage at room temperature, and after 24h, 1, 3 and 6 months of wet storage at 37 degrees C. All data were analyzed using two-way ANOVA, Bonferroni/Dunn's test for multiple comparisons and paired t-test with a significance level of p<0.05. In addition, inorganic filler volume percentages were derived from the phenomenological model introduced by Braem et al. [11]. RESULTS: The studied materials varied widely in terms of elastic modulus, ranging between composites classified as Compact-Filled Densified (elastic modulus of 23.4+/-2.4 GPa) and as Microfine (elastic modulus of 8.5+/-2.1 GPa). SIGNIFICANCE: The great diversity observed in the elastic modulus of this type of composites necessitates clear specifications with regard to 'first' the definition of marketing terms such as packable and so on, and 'second' the justified use in posterior teeth.

Analysis of Variance↗
PubMed2001

Wheat seed proteins exhibit a complex mechanism of protein elasticity.

Elastomeric proteins are found in a number of animal tissues (elastin, abductin and resilin), where they have evolved to fulfil a range of biological functions. All exhibit rubber-like elasticity, undergoing deformation without rupture, storing the energy involved in deformation, and then recovering to their initial state when the stress is removed. The second part of the process is passive, entropy decreasing when the proteins are deformed, with the higher entropy of the relaxed state providing the driving force for recoil. In plants there is only one well-documented elastomeric protein system, the alcohol-soluble seed storage proteins (gluten) of wheat. The elastic properties of these proteins have no known biological role, the proteins acting as a store for the germinating seed. Here we show that the modulus of elasticity of a group of wheat gluten subunits, when cross-linked by gamma-radiation, is similar to that of the cross-linked polypentapeptide of elastin. However, thermoelasticity studies indicate that the mechanism of elastic recoil is different from elastin and other characterized protein elastomers. Elastomeric force, f, has two components, an internal energy component, f(e), and an entropic component, f(s). The ratio f(e)/f can be determined experimentally; if this ratio is less than 0.5 the elastomeric force is predominantly entropic in origin. The ratio was determined as 5.6 for the cross-linked high M(r) subunits of wheat glutenin and near zero for the cross-linked polypentapeptide of elastin. Tensile stress must be entropic or energetic in origin, the results would suggest that elastic recoil in the wheat gluten subunits, in part, may be associated with extensive hydrogen bonding within and between subunits and that entropic and energetic mechanisms contribute to the observed elasticity.

Elasticity↗
PubMed1998

Morphologic changes in the elastic fibers of the temporomandibular joint after experimental disc perforation in the rabbit.

PURPOSE: Elastic fibers in the attachment regions of the temporomandibular joint (TMJ) are considered important in the movements of the disc during jaw motion. This study was designed to determine whether there are change in the elastic fibers of the TMJ when the disc is perforated for a long period. MATERIALS AND METHODS: Each TMJ of five rabbits was surgically exposed, and a mediolateral perforation was made in the center of the articulating region of the disc with a scalpel. Five untreated and three sham-operated rabbits were used as controls. The TMJs were removed after 10 months and processed for histochemical demonstration of elastic fibers. RESULTS: Osteoarthritic changes and a significant decrease in number of the elastic fibers in the anterior-inferior attachment and posterior-inferior attachment of the TMJ disc were observed after disc perforation. Conversely, elastic fibers appeared in the fibrous tissue on the resorbed bone of the articular eminence. CONCLUSIONS: Experimental disc perforation changes the distribution and density of the elastic fiber in the TMJ as well as causes osteoarthritis. A knowledge of these facts may improve our understanding of perforation of the disc.

Animals↗
PubMed1998

Characterization of the development of elasticity in dental luting cements.

OBJECTIVES: The development of elasticity of dental luting cements was investigated as an indicator of working and setting time. METHOD: A displacement rheometer was used to monitor the development of elasticity. Three luting cements were examined. RESULTS: The initial onset of elasticity in the glass-ionomer and polycarboxylate cements did approximate the manufacturer's quoted working times. The onset of elasticity did not appear to define a clinically useful working time for the zinc phosphate cement. CONCLUSIONS: The development of elasticity in luting cements as a measure of working time was not universally relevant. The demonstration of the presence of elasticity in some cements may have consequences for cementation and all ceramic crown systems.

Cementation↗
PubMedDate not supplied

Aortic elastic properties with transesophageal echocardiography with automated border detection: validation according to regional differences between proximal and distal descending thoracic aorta.

We have previously described the use of transesophageal echocardiography with automated border detection to quantify regional aortic elastic properties. The purpose of this study was to validate this technique further by measuring regional variations of aortic elastic properties and comparing them with previously published data acquired by invasive methods. In nine anesthetized, closed-chest dogs, aortic pressure and lumenal area (transesophageal echocardiography with automated border detection) signals were recorded simultaneously at two aortic sites: just distal to the branching site of the left subclavian artery (proximal) and at the level of the diaphragm (distal). Instantaneous wall thickness was estimated by combining M-mode measurement of aortic end-diastolic thickness with instantaneous lumenal area. Data were acquired over a wide range of loading conditions, generated by inferior vena caval balloon occlusion. Aortic compliance per unit length, midwall radius, midwall stress, and incremental elastic modulus were computed. Aortic midwall radius and incremental elastic modulus values for proximal and distal aortic sites were compared at a common level of midwall stress. Compliance per unit length was higher in the proximal compared with the distal descending thoracic aorta (0.013 +/- 0.003 versus 0.008 +/- 0.003 cm2/mm Hg; mean +/- SD; p = 0.0011). Midwall radius was larger at the proximal location (0.76 +/- 0.07 cm versus 0.64 +/- 0.07 cm; p = 0.0001), whereas incremental elastic modulus was greater distally (0.799 +/- 0.052 dynes x 10(6)/cm2 versus 0.912 +/- 0.130 dynes x 10(6)/cm2; p = 0.02). Lower compliance values at the distal site of the descending thoracic aorta resulted from greater wall stiffness and a smaller radius. Transesophageal echocardiography with automated border detection provides reliable measurements of instantaneous aortic areas necessary for quantifying regional elastic properties.

Animals↗
PubMed2003

Treatment with rosiglitazone reduces hyperinsulinemia and improves arterial elasticity in patients with type 2 diabetes mellitus.

OBJECTIVE: The aim of this study was to determine whether reduction of hyperinsulinemia with rosiglitazone will improve vascular elasticity in patients with non-insulin dependent diabetes mellitus. METHODS: In an open label study 52 patients with non-insulin dependent diabetes mellitus and at least one additional cardiovascular risk factor, were treated for 6 months with 4 mg of rosiglitazone, and uptitrated to 8 mg after 3 months of treatment, if needed. At the beginning of the study and at its end, blood was drawn for insulin, C- peptide, and 24-h urine collected for microalbuminuria/proteinuria. Glucose, chemistry, lipid profile, and hemoglobin A1C were determined at 0, 3, and 6 months. Vascular compliance was measured in monthly intervals. RESULTS: Treatment increased significantly small artery elasticity from 1.45 to 2.43 mL/mm Hg x 100. Large artery elasticity tended to increase toward the end of the study (P = not significant). Systolic blood pressure (BP)decreased from 144 to 124 mm Hg and diastolic BP decreased from 80 to 62.5 mm Hg, despite mild weight gain [corrected]. Heart rate tended to decrease from 76.3 to 74.7 beats/min (P = not significant). Systemic vascular resistance decreased from 1789.8 to 1329.4 dyne sec/cm(5). Plasma insulin, in patients not treated with insulin, decreased from 42.45 +/- 24.90 to 27.86 +/- 14.86 IU/mL (P =.0001). CONCLUSIONS: Treatment with rosiglitazone reduced hyperinsulinemia and improved small artery elasticity with a tendency to improve large artery elasticity, in hypertensive and in normotensive patients. Because rosiglitazone improves insulin receptor sensitivity (IRS), it is logical to assume that the reduction in hyperinsulinemia reflects improvement in IRS. Our data support the hypothesis that hyperinsulinemia and IRS participate in the mechanisms of tissue injury and their improvement induces improvement in arterial elasticity.

Adult↗
PubMed2001

Quantification of elastic recoil after balloon angioplasty in the iliac arteries.

PURPOSE: Elastic recoil of the arterial wall has been shown to be responsible for a significant loss of luminal area after balloon angioplasty in the coronary arteries, but it has not been well studied in the peripheral arteries. Because elastic recoil depends on the presence of elastin in the arterial wall, and the amount of elastin varies by artery and proximity to the aorta, the importance of this response to angioplasty may be different in peripheral arteries. The purpose of this study is to document the degree of elastic recoil in the iliac arteries, and analyze variables that might influence the results. MATERIALS AND METHODS: A series of 19 patients with 25 iliac artery stenoses underwent balloon angioplasty followed by placement of a Palmaz stent with the same-sized angioplasty balloon. The minimum luminal diameter of the lesion was measured before treatment, immediately after balloon angioplasty, and again after stent placement. The arterial diameter after stent placement was defined as the diameter of the inflated balloon. The degree of recoil was correlated with nine variables: patient age and sex, lesion location and length, lesion severity (as percent stenosis), the balloon:artery ratio, and three factors related to lesion morphology--complex versus simple, eccentric versus concentric, and calcified versus noncalcified. RESULTS: Elastic recoil averaged 36% +/- 11% and ranged from 19% to 54% in this series of patients. The only variable that significantly influenced the degree of elastic recoil was the balloon:artery ratio (P =.039), which was directly related. CONCLUSION: Elastic recoil is a significant limitation of balloon angioplasty in the iliac arteries. This study illustrates the importance of techniques that limit recoil, such as vascular stents, in angioplasty of the iliac arteries.

Angioplasty, Balloon↗
PubMedDate not supplied

Ultrastructure abnormalities in proteoglycans, collagen fibrils, and elastic fibers in normal and myxomatous mitral valve chordae tendineae.

Normal and myxomatous chordae tendineae were studied using light and electron microscopy, to assess the alterations in the appearance and mutual arrangement of proteoglycans, collagen fibrils, and elastic fibers. Specific staining with ruthenium red and cuprolinic blue in a critical electrolyte concentration mode were used to localize proteoglycans. Fresh tissues were fixed in glutaraldehyde containing the cationic dyes and embedded into Spurr resin. Semithin sections of LR White (London Resin Co., Basingstoke, U.K.)-embedded tissue were used for histochemistry. In normal chordae tendineae, the fibrosa comprised close-packed collagen fibrils intermixed with elastic fibers. These were surrounded by a thin layer of elastic fibers and collagen fibrils, both of which were closely associated with proteoglycans. In myxomatous chordae tendineae, alterations were observed in the connective tissue. Proteoglycans were more abundant and were distributed throughout the tissue. The outermost layer was transformed into an undifferentiated electron-dense mass surrounding the central fibrosa, which contained degraded elastic fibers and collagen fibrils. Collagen fibrils had faint banding or lacked a banding pattern altogether. Spaces between collagen fibrils were occupied by abnormal proteoglycans or proteoglycan aggregates. Elastic fibers showed varying degrees of degeneration and were occasionally replaced by electron-lucent spaces containing microfibrils. Accumulation of abnormal proteoglycan was also observed around degenerated elastic fibres and collagen fibrils.

Aged↗
PubMed1998

Measurement of elastic-like behaviour in the power squat.

Because traditional procedures of evaluating elastic-like behaviour have yielded mixed results, the purpose of this work was to explore two methods of measuring elastic-like behavior in the power squat. The entire concentric time method was based on traditional procedures. The initial concentric time method was developed to examine elastic-like behavior for the beginning 0.2 s of concentric movement. The present study compares a power squat performed maximally by nine subjects at 70% of their 1 repetition maximum. Squats were performed with rebound (REB) and without rebound (NRB). For the entire concentric time method only concentric time was significantly greater (p < 0.05) in the NRB than the REB. For the initial concentric time method the relative displacement, velocity, net work, & peak power of the center of mass were significantly greater (p < 0.05) in the REB than the NRB. Some subjects had theoretically infeasible negative results for elastic enhancement in the entire concentric time method, but not the initial concentric time method. It seems that measuring elastic-like behavior near the end of the movement can be confounded by the constraints of the task. Based on its success, the initial concentric time method appears to be more appropriate for measurement of elastic-like behavior in lifting.

Adult↗