Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Base Composition”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24Linked to original sources
PubMed2001

Successful restoration of load-bearing cavities in posterior teeth with direct-replacement resin-based composite.

Successful restoration of posterior teeth with resin-based restorative materials requires the clinician to be aware of the factors influencing success. These include correct patient and cavity selection, correct choice of material, identifying a matrix system that will achieve a tight contact, and correct placement methods. A means of avoiding stress due to polymerization shrinkage should also be used.

Bicuspid↗
PubMed2005

Hot compaction of poly(methyl methacrylate) composites based on fiber shrinkage results.

Uniaxial self-reinforced composite poly(methyl methacrylate) (SRC-PMMA) is being investigated as a pre-coat material for the femoral component of total hip replacements. Hot compaction of self-reinforced composites is largely an empirical process which varies the processing parameters of time, temperature and pressure until the desired properties are obtained. Previous work has shown that PMMA fibers have unique thermal relaxation properties dependent upon the retained molecular orientation in them. This work processed composites at times and temperatures that span the relaxation process for a single fiber. It was found that molecular orientation, as measured by birefringence, was lost in composites processed at times greater than relaxation times for single fibers. Flexural properties were also found to vary with processing conditions, with the highest values of 165 +/- 15 MPa and 168 +/- 3 MPa found at high and low processing times, respectively. These are significantly stronger than unreinforced PMMA which has a flexural strength of 127 +/- 14 MPa. It is hypothesized that diffusion between fibers occurs much more quickly than the loss of molecular orientation and it was seen that SRC-PMMA processing conditions can be predicted from the relaxation times and temperatures from single fibers.

Biocompatible Materials↗
PubMed2003

Evaluation of doses in radiotherapy using solid-state composites based on natural colourless topaz.

The thermoluminescent properties of composites containing powdered topaz embedded in Teflon or glass were studied and compared with the corresponding properties of the well known TLD-100 commercial dosimeters. Relative sensitivity, TL fading, reproducibility of the sample preparation process, and possibility of re-utilisation of the dosimeters were investigated. Measurements of absorbed doses in simulated radiotherapy treatments were also taken. The irradiations were performed using gamma rays from a 60Co source in the dose range from 1cGy to 2Gy. The dosimeters were installed in badges and attached inside acrylic plates of various thicknesses in the radiation fields. The dose profiles obtained with this procedure are very similar to the ones obtained with equivalent tissues. It is concluded that these composites of natural colourless topaz crystals can be efficiently used as TL dosimeters.

Aluminum Silicates↗
PubMed2005

Thrombogenicity and blood coagulation of a microcatheter prepared from carbon nanotube-nylon-based composite.

Here we describe the fabrication of nanocomposite-based microcatheter through-melt extrusion utilizing high-purity carbon nanotubes as filler and nylon as matrix. Homogeneous dispersion of carbon nanotubes in nylon can provide novel microcatheters with enhanced mechanical properties (easier to handle) and extremely reduced thrombogenicity or antithrombotic property. The present microcatheter with high performance is highly promising for medical applications.

Animals↗
PubMed1982

The genome of Plasmodium falciparum. I: DNA base composition.

Some structural properties of the DNA of Plasmodium falciparum were studied thoroughly using several techniques. Its G+C content was found to be extremely low (17-19%), the lowest reported for a living organism. The DNA seems to be composed only of the four major bases as no methylated bases were detected. This DNA had a Tm value of 62.5 degrees C and its denaturation profile showed no marked intramolecular heterogeneity.

Animals↗
PubMed2006

Controlled drug release from a novel injectable biodegradable microsphere/scaffold composite based on poly(propylene fumarate).

The ideal biomaterial for the repair of bone defects is expected to have good mechanical properties, be fabricated easily into a desired shape, support cell attachment, allow controlled release of bioactive factors to induce bone formation, and biodegrade into nontoxic products to permit natural bone formation and remodeling. The synthetic polymer poly(propylene fumarate) (PPF) holds great promise as such a biomaterial. In previous work we developed poly(DL-lactic-co-glycolic acid) (PLGA) and PPF microspheres for the controlled delivery of bioactive molecules. This study presents an approach to incorporate these microspheres into an injectable, porous PPF scaffold. Model drug Texas red dextran (TRD) was encapsulated into biodegradable PLGA and PPF microspheres at 2 microg/mg microsphere. Five porous composite formulations were fabricated via a gas foaming technique by combining the injectable PPF paste with the PLGA or PPF microspheres at 100 or 250 mg microsphere per composite formulation, or a control aqueous TRD solution (200 microg per composite). All scaffolds had an interconnected pore network with an average porosity of 64.8 +/- 3.6%. The presence of microspheres in the composite scaffolds was confirmed by scanning electron microscopy and confocal microscopy. The composite scaffolds exhibited a sustained release of the model drug for at least 28 days and had minimal burst release during the initial phase of release, as compared to drug release from microspheres alone. The compressive moduli of the scaffolds were between 2.4 and 26.2 MPa after fabrication, and between 14.9 and 62.8 MPa after 28 days in PBS. The scaffolds containing PPF microspheres exhibited a significantly higher initial compressive modulus than those containing PLGA microspheres. Increasing the amount of microspheres in the composites was found to significantly decrease the initial compressive modulus. The novel injectable PPF-based microsphere/scaffold composites developed in this study are promising to serve as vehicles for controlled drug delivery for bone tissue engineering.

Bone Cements↗
PubMed1979

DNA base composition, nature of intracellular DNA, morphology, and classification of bacteriophages infecting Micrococcus luteus.

Ten bacteriophages infecting Micrococcus luteus have been characterized. All phages contain double-stranded DNA, of 64.3--73.5 mol% guanine plus cytosine (GC). The DNA of phage N7 has the highest GC content reported for any bacterial virus. No unusual bases have been found. The intracellular replicating DNAs of six phages are covalently closed circular molecules. All 10 phages have isometric, probably icosahedral, heads and long, flexible, noncontractile tails and can be sorted into two morphological groups based on size and presence or absence of a collar. Host-range studies indicate six host-range groups.

Bacteriophages↗
PubMed1988

DNA base composition of filarial nematodes.

We have determined the molar content of guanine + cytosine (GC content) of DNA of the filarial nematode (Brugia malayi, Brugia pahangi and Dirofilaria imitis) and of the free-living soil nematodes Caenorhabditis elegans and have analysed the DNA for the presence of methylcytosine. Two independent methods, thermal denaturation and direct analysis of base content by HPLC following enzymatic hydrolysis, reveal that the GC content of filarial nematodes is 26-28%. We have been unable to find methylcytosine in the DNA of B. malayi.

Animals↗
PubMed1963

Base composition of the RNA of a reovirus variant.

A variant of reovirus 3, Dearing strain, isolated after repeated pdssage of the original Dearing virus in L cells, is similar to the parent virus in many ways. It is, however, less sensitive to specific antibodies and metabolic inhibitors, and is released from L cells to a lesser extent than the original virus. Calculated as moles per 100 moles of total base in RNA, the percentage of guanine is 20.2, adenine, 29.8, cytosine, 21.0, and uracil 29.1. These values closely approximate those reported previously for the parent virus.

Adenine↗
PubMed1999

Development of autologous human dermal-epidermal composites based on sterilized human allodermis for clinical use.

The aim of this study was to identify a sterilization technique for the preparation of human allodermis which could be used as a dermal component in wound healing and as the dermal base for production of dermal-epidermal composites for one-stage grafting in patients. We report that it is possible to produce dermal-epidermal composites which perform well in vitro and in vivo using a standard ethylene oxide sterilization methodology. Prevention of ethylene oxide-induced damage to the dermis was achieved using gentle dehydration of the skin prior to ethylene oxide sterilization. The issue of whether viable fibroblasts are required for composite production was examined in comparative studies using glycerol vs. ethylene oxide sterilized dermis. Where good collagen IV retention was achieved following preparation of acellular de-epidermized dermis there was no advantage to having fibroblasts present in vitro or in vivo; however, where collagen IV retention was poor or where keratinocytes were initially expanded in culture then there was a significant advantage to introducing fibroblasts to the composites during their preparative 10-day period in vitro. The requirement for fibroblasts became less evident when composites were grafted on to nude mice. In conclusion, we report a protocol for the successful sterilization of human allodermis to achieve an acellular dermis with good retention of collagen IV. This acellular dermis would be appropriate for clinical use as a dermal replacement material. It can also be used for the production of dermal-epidermal composites using autologous keratinocytes (with or without fibroblasts).

Adult↗
PubMed2002

Context dependence of meiotic recombination hotspots in yeast: the relationship between recombination activity of a reporter construct and base composition.

Borde and colleagues reported that a reporter plasmid inserted at different genomic locations in Saccharomyces cerevisiae had different levels of meiotic recombination activity. We show that the level of recombination activity is very significantly correlated with the GC content of DNA sequences flanking the insertion.

Base Composition↗