Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Potassium Compounds”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23Linked to original sources
PubMed1991

The effect of exercise associated with subchronic poisoning with potassium nitrate and sodium nitrite on the processes of intestinal absorption of D-xylose in rats.

The intestinal absorption of D-xylose was studied during the subchronic poisoning of male Wistar rats with orally administered potassium nitrate and sodium nitrite associated with exercise; running on a moving track during the last two weeks of poisoning. The metabolic parameters of Na+/K(+)-ATPase, alkaline phosphatase, oxygen uptake, and lactic acid level in the small intestine mucosa were determined one hour after D-xylose treatment. Exercise increased the toxicity of potassium nitrate and sodium nitrite. The experiment demonstrated post-exercise reduction of D-xylose absorption and decrease activity of Na+/K(+)-ATPase and alkaline phosphatase. Exercise caused transient hypoxia of the small intestine, which was observed only in the groups subjected to exercise on the day of the determinations.

Administration, Oral↗
PubMed1996

Modulation of the Ca(2+)-dependent K+ channel, hslo, by the substituted diphenylurea NS 1608, paxilline and internal Ca2+.

The high-conductance Ca(2+)-activated K channel (BK channel) is not only regulated by a number of physiological stimuli, but it is also sensitive to pharmacological modulation. We have stably expressed the alpha-subunit of the human BK channel, hslo, in HEK 293 cells and studied by patch-clamp technique how its gating is modulated by the channel activator NS 1608, by the selective channel blocker paxilline, as well as by changes in [Ca2+]i and Vm. The cells expressed 200-800 hslo channels per patch. The channel activity was determined by tail current analysis, and the activation curves were fitted to single Boltzmann functions, from which a gating charge for the hslo channel of 1.2 elementary charges was deduced. The hslo channel was very sensitive to changes in [Ca2+]i within the physiological range, whereas Ca(2+)-independent openings were seen at Ca2+ concentrations of 15 nM or below. NS 1608 shifted the hslo channel activation curve towards negative membrane potentials with an EC50 of 2.1 microM and a maximal shift of -74 mV. The channels activated by NS 1608 were sensitive to block by paxilline, but the two molecules apparently did not interact within the same site, since paxilline reduced the size of the tail current at all voltages, whereas NS 1608 shifted the activation curve along the voltage axis. Further, the effect of paxilline was Ca(2+)-sensitive, whereas NS 1608 elicited identical effects in the presence of either < 0.5 nM or 500 nM [Ca2+]i. NS 1608 hyperpolarized the cells by -50 to -70 mV, and paxilline depolarized them towards 0 mV. In addition to the effects on the steady state current NS 1608 also significantly influenced the non-stationary channel kinetics. In the presence of NS 1608 the time constants for deactivation of tail currents were more than tripled at all potentials. We have shown, that NS 1608 modulates steady-state BK currents and channel gating kinetics through a Ca(2+)-independent interaction with the alpha-subunit of the channel.

Calcium↗
PubMed2005

The crystallization of an aluminosilicate glass in the K2O-Al2O3-SiO2 system.

OBJECTIVES: The aims of the study were to explore the nucleation and crystallization kinetics of an aluminosilicate glass in K2O-Al2O3-SiO2 system and to characterize it. OBJECTIVES: A starting glass composition of wt%; 64.2% SiO2, 16.1% Al2O3, 10.9% K2O, 4.3% Na2O, 1.7% CaO, 0.5% LiO and 0.4% TiO2 was heated in an electric furnace and later quenched to produce glasses. The glass powders were heat treated using differing heat treatment schedules and quenched. Dta, Xrd, Eds and Sem analyses were used to characterize and explore the crystallization kinetics of the glasses. RESULTS: Phase separation of the glasses was identified and characterized in the glasses. Tetragonal leucite, cubic leucite and sanadine glass-ceramics were produced. Fine leucite crystals (1 microm2) were crystallized with minimal matrix microcracking. SIGNIFICANCE: Amorphous phase separation appeared to be an important precursor to nucleation and crystal growth in the alkali aluminosilicate glasses explored. It was possible to control the crystallization of tetragonal leucite and sanidine phases by selected heat treatment of glass powders and monoliths, resulting in the production of fine grained tetragonal leucite glass-ceramics.

Aluminum Oxide↗
PubMed2005

Release characteristics of anionic drug compounds from liquid crystalline gels I: Passive release across non-rate-limiting membranes.

Liquid crystalline gels (LCG) offer the formulator dynamic and flexible vehicles, into which actives, enhancers and other adjuvants with a wide range of physicochemical properties can be incorporated. This is achievable because of the biphasic oil/water composition of the gel. In this paper, the suitability of an isotropic liquid crystalline gel is investigated for a range of anionic drug molecules, with particular emphasis on sodium diclofenac. Parameters, which have been investigated, include the mode of vehicle preparation, the effect of the concentration of the drug and how buffering the gel and/or the receptor medium affect the release profiles. Such profiles have been measured for the sodium salts of benzoate, salicylate and indomethacin. The passive release from the standard system was found to adhere to matrix-controlled diffusion. An increase in concentration leads to a non-linear increase in the cumulative release of sodium diclofenac from the gels. In direct contrast to the result reported for cationic salbutamol base, optimum release from the gel was achieved when neither the receptor medium nor the aqueous phase of the gel was buffered. The percentages released of the sodium salts of benzoate, salicylate and indomethacin, after 24 h, were determined to be 25, 26 and 19%, respectively, and these are significantly greater than the release of sodium diclofenac. This suggests that diclofenac undergoes ion-pairing or complexation within the gel, which inhibits its diffusion from the vehicle. Future papers will report on the incorporation of enhancers and the effects of iontophoresis on the release profiles of drugs from these gels, and ultimately on the transdermal transport of drugs from these vehicles across human and porcine skin.

Agar↗
PubMed2006

Contact time optimization of two-stage batch adsorber design using second-order kinetic model for the adsorption of phosphate onto alunite.

The adsorption of phosphate onto alunite in a batch adsorber has been studied. Four kinetic models including pseudo first- and second-order equation, intraparticle diffusion equation and the Elovich equation were selected to follow the adsorption process. Kinetic parameters, rate constants, equilibrium adsorption capacities and related correlation coefficients, for each kinetic model were calculated and discussed. It was shown that the adsorption of phosphate onto alunite could be described by the pseudo second-order equation. Adsorption of phosphate onto alunite followed the Langmuir isotherm. A model has been used for the design of a two-stage batch adsorber based on pseudo second-order adsorption kinetics. The model has been optimized with respect to operating time in order to minimize total operating time to achieve a specified amount of phosphate removal using a fixed mass of adsorbent. The results of two-stage batch adsorber design studies showed that the required times for specified amounts of phosphate removal significantly decreased. It is particularly suitable for low-cost adsorbents/adsorption systems when minimising operating time is a major operational and design criterion, such as, for highly congested industrial sites in which significant volume of effluent need to be treated in the minimum amount of time.

Adsorption↗
PubMed1996

An in vitro investigation of the wear of enamel on porcelain and gold in saliva.

This study compared enamel wear against low-fusing porcelain (Procera All-Ceramic) with the wear against feldspathic porcelain (Ceramco) and gold alloy (Olympia). Human enamel abraders were polished to a 3 microns variance on silicon carbide paper. Five enamel abraders were abraded against five disks that were fabricated from (1) gold alloy polished to 1 micron variance, (2) autoglazed feldspathic porcelain, and (3) autoglazed low-fusing porcelain. The enamel sample was tested in human saliva in a wear machine with a constant load of 1 pound during 10,000 rotational cycles. The amount of wear was determined with a stereomicroscope at magnification x64. Significant differences in mean enamel wear were found when abraded against Olympia gold (9 microns), Procera All-Ceramic (60 microns), and Ceramco feldspathic porcelain (230 microns). Significant differences in restorative material wear were found between Olympia gold (0.32 microns) and the porcelain materials, Procera All-Ceramic (4.3 microns) and Ceramco feldspathic porcelain (3.7 microns).

Aluminum Silicates↗
PubMed2003

Adsorption of reactive dyes on calcined alunite from aqueous solutions.

An attempt to alleviate the problem caused by the presence of reactive dyes in textile effluents was undertaken. Since alunite is a very abundant and inexpensive, we decided to experiment with it as a potential adsorbent for a certain type of the supracited pollutants used in cellulose fibers dyeing. The adsorption of Reactive Blue 114 (RB114), Reactive Yellow 64 (RY64) and Reactive Red 124 (RR124) by calcined alunite was studied by varying parameters such as the calcination temperature and time, particle size, pH, agitation time and dye concentration. Acidic pH was favorable for the adsorption of RB114 and alkaline pH was favorable to both RY64 and RR124. The equilibrium data fit the Langmuir isotherm. The adsorption capacities were found to be 170.7, 236 and 153 mg dye per gram of calcined alunite for RB114, RY64 and RR124, respectively. The pseudo first- and second-order kinetic models were used to describe the kinetic data, and the rate constants were evaluated. The experimental data were fitted by the second-order kinetic model, which indicates that chemicalsorption is the rate limiting step, inside of mass transfer.

Adsorption↗
PubMed2001

Platination of the (T2G4)4 telomeric sequence: a structural and cross-linking study.

The telomeric sequence (T(2)G(4))(4) was platinated in aqueous solutions containing 50 mM LiClO(4), NaClO(4), or KClO(4). The identification of the guanines which reacted with [Pt(NH(3))(3)(H(2)O)](2+) revealed that the same type of folding exists in the presence of the three cations and that the latter determine the relative stabilities of the G-quadruplex structures in the order K(+) > Na(+) >> Li(+). The tri-ammine complex yielded ca. 40--90% of adducts, mono- and poly-platinated, bound to 4 guanines out of the 16 guanines in the sequence, in the decreasing amounts G9 > G15 >> G3 > G21. The formation of these adducts was interpreted with a G-quadruplex structure obtained by restrained molecular dynamics (rMD) simulations which confirms the schematic model proposed by Williamson et al. [(1989) Cell 59, 871--880]. The bifunctional complexes cis- and trans-[Pt(NH(3))(2)(H(2)O)(2)](2+) also first reacted with G9 and G15 and gave cross-linked adducts between two guanines, which did not exceed 5% each of the products formed. Both the cis and trans isomers formed a G3-G15 platinum chelate, and the second also formed bis-chelates at both ends of the G-quadruplex structure: G3-G15/G9-G21 and G3-G15/G9-G24. The rMD simulations showed that the cross-linking reactions by the trans complex can occur without disturbing the stacking of the three G-quartets.

Base Sequence↗
PubMed1997

Dehydration of Baralyme increases compound A resulting from sevoflurane degradation in a standard anesthetic circuit used to anesthetize swine.

UNLABELLED: In a model anesthetic circuit, dehydration of Baralyme brand carbon dioxide absorbent increases degradation of sevoflurane to CF2=C(CF3)OCH2F, a nephrotoxic vinyl ether called Compound A. In the present study, we quantified this increase using "conditioned" Baralyme in a circle absorbent system to deliver sevoflurane anesthesia to swine. Mimicking continuing oxygen delivery for 2 days after completion of an anesthetic, we directed a conditioning fresh gas flow of 5 L/min retrograde through fresh absorbent in situ in a standard absorbent system for 40 h. The conditioned absorbent was subsequently used (without mixing of the granules) in a standard anesthetic circuit to deliver sevoflurane to swine weighing 78 +/- 2 kg. The initial inflow rate of fresh gas flow was set at 10 L/min with the vaporizer at 8% to achieve the target end-tidal concentration of 3.0%-3.2% sevoflurane in approximately 20 min. The flow was later decreased to 2 L/min, and the vaporizer concentration was decreased to sustain the 3.0%-3.2% value for a total of 2 h (three pigs) or 4 h (eight pigs). Inspired Compound A increased over the first 30 +/- 60 min to a peak concentration of 357 +/- 49 ppm (mean +/- SD), slowly decreasing thereafter to 74 +/- 6 ppm at 4 h. The average concentration over 2 h was 208 +/- 25 ppm, and the average concentration over 4 h was 153 +/- 19 ppm. Pigs were killed 1 or 4 days after anesthesia. The kidneys from pigs anesthetized for both 2 h and 4 h showed mild inflammation but little or no tubular necrosis. These results suggest that dehydration of Baralyme may produce concentrations of Compound A that would have nephrotoxic effects in humans in a shorter time than would be the case with normally hydrated Baralyme. IMPLICATIONS: The vapor known as Compound A can injure the kidney. Dehydration of Baralyme, a standard absorbent of carbon dioxide in inhaled anesthetic delivery systems, can cause a 5- to 10-fold increase in Compound A concentrations produced from the inhaled anesthetic, sevoflurane, given at anesthetizing concentrations in a conventional anesthetic system.

Anesthesia, Closed-Circuit↗
PubMed1997

High carboxyhemoglobin concentrations occur in swine during desflurane anesthesia in the presence of partially dried carbon dioxide absorbents.

BACKGROUND: Increased carboxyhemoglobin concentrations in patients receiving inhalation anesthetics (desflurane, enflurane, and isoflurane) have been reported. Recent in vitro studies suggest that dry carbon dioxide absorbents may allow the production of carbon monoxide. METHODS: The authors used high fresh oxygen flow (5 or 10 l/min) through a conventional circle breathing system of an anesthesia machine for 24 or 48 h to produce absorbent drying. Initial studies used 10 l/min oxygen flow with the reservoir bag removed or with the reservoir bag left in place during absorbent drying (this increases resistance to gas flow through the canister). A third investigation evaluated a lower flow rate (5 l/min) for absorbent drying. Water content of the absorbent and temperature were measured. Pigs received a 1.0 (human) minimum alveolar concentration desflurane anesthetic (7.5%) for 240 min using a 1 l/min oxygen flow rate with dried absorbent. Carbon monoxide concentrations in the circuit and carboxyhemoglobin concentrations in the pigs were measured. RESULTS: Pigs anesthetized with desflurane using Baralyme exposed to 48 h of 10 l/min oxygen flow (reservoir bag removed) had extremely high carboxyhemoglobin concentrations (more than 80%). Circuit carbon monoxide concentrations during desflurane anesthesia using absorbents exposed to 10 l/min oxygen flow (reservoir bag removed, 24 h) reached peak values of 8,800 to 13,600 ppm, depending on the absorbent used. Carboxyhemoglobin concentrations reached peak values of 73% (Baralyme) and 53% (soda lime). The water content of Baralyme decreased from 12.1 +/- 0.3% (mean +/- SEM) to as low as 1.9 +/- 0.4% at the bottom of the lower canister (oxygen flow direction during drying was from bottom to top). Absorbent temperatures in the bottom canister increased to temperatures as high as 50 degrees C. With the reservoir bag in place during drying (10 l/min oxygen flow), water removal from Baralyme was insufficient to produce carbon monoxide (lowest water content = 5.5%). Use of 5 l/min oxygen flow (reservoir bag removed) for 24 h did not reduce water content sufficiently to produce carbon dioxide with desflurane. CONCLUSIONS: An oxygen flow rate of 10 l/min for 24 h in a conventional anesthesia circuit can dry carbon dioxide absorbents sufficiently to produce extremely high levels of carbon monoxide with high carboxyhemoglobin concentrations in desflurane-anesthetized pigs. When the reservoir bag is in place on the anesthesia machine or when a lower oxygen flow rate (5 l/min) is used, carbon dioxide absorbent drying still occurs, but 24-48-h exposure time is insufficient to allow for carbon monoxide production with desflurane.

Adsorption↗
PubMed2004

Fires from the interaction of anesthetics with desiccated absorbent.

Rarely, fire and patient injury have resulted from the degradation of sevoflurane by desiccated carbon dioxide absorbent. Desiccated absorbent also can degrade desflurane and isoflurane, and in the present investigation we sought to determine whether a danger of fire also arose with their use in the presence of desiccated absorbent. Baralyme was desiccated by heating and directing a 10 L/min flow of oxygen through the absorbent. Approximately 1200 g of this desiccated absorbent was used to fill a standard absorber placed in a standard anesthetic circuit to which we directed a 6 L/min flow of oxygen containing 1.5 or 3.0 MAC desflurane, isoflurane, or sevoflurane. A 3-L reservoir bag served as a surrogate lung, and we ventilated this lung with a minute ventilation of 10 L/min. With desflurane or isoflurane, at both 1.5 MAC and 3.0 MAC, temperatures increased in 30 to 70 min to a peak of approximately 100 degrees C and then decreased. With 1.5 MAC sevoflurane (3.0 MAC was not studied), temperatures increased to over 200 degrees C, and in 2 of 5 studies, flames appeared in the anesthetic circuit. In a separate study, we found that concurrent delivery of carbon dioxide and desflurane did not increase peak temperatures. We conclude that the interaction of desflurane or isoflurane with desiccated absorbent is not likely to produce the conflagrations possible with sevoflurane.

Barium Compounds↗
PubMed2003

Further studies on spot tests and microcrystal tests for identification of cocaine.

The presence of cocaine in illicit drug samples is still being determined in some laboratories using spot tests and microcrystal tests. Seventeen chemical species were tested using three different spot tests (Wagner, Marquis, and cobalt thiocyanate followed by stannous chloride reactions) and two microcrystal tests (gold chloride and platinic chloride) to determine whether the results could be differentiated from the results of these tests on cocaine. The data obtained indicated that nine of the 17 compounds gave results similar to those from cocaine using the three spot tests, but that the results from microcrystal testing allowed for differentiation of all nine compounds from cocaine.

Cobalt↗
PubMed2006

Topical antimicrobials in the control of wound bioburden.

Bacterial colonization and infection are important factors in compromised wound healing, particularly in chronic wounds. Although "best practice" for controlling these factors currently is not defined, systemic antibiotics are generally accepted as the preferred choice for treating infection, provided ischemia does not reduce their bioavailability. However, widespread use of systemic and topical antibiotics is associated with the emergence of resistant bacterial strains such as methicillin-resistant Staphylococcus aureus. Colonization of wounds presents a double problem--potentially delayed healing and a potential source for cross-contamination. The judicious use of dressings, notably those containing certain antiseptic agents, can be a valuable option to control infection and promote healing. A review of the literature underscores the importance of considering the antiseptic route as part of a concerted approach to wound management and infection control.

Acute Disease↗
PubMedDate not supplied

[Determination of the nucleic acids in pig embryonic kidney cells by magnetic cytaphoresis].

Gallocyanine-chrome alum-stained pig embryonic kidney cells have paramagnetic properties. They move under the influence of gradient magnetic field (magnetophoresis). The velocity of magnetophoresis is proportional to the content of nucleic acids in cells. This allows to estimate the content of nucleic acids per cell dry weight by magnetophoresis and analytical centrifugation.

Animals↗
PubMed1991

Induction of thyroid proliferative changes in rats treated with antithyroid compound.

This study was designed to investigate the histologic changes in goitrogen-induced thyroid growth of the rat. The animals were orally treated by 1% potassium perchlorate except the controls and were sacrificed in intervals ranging from 1 to 12 months. The thyroid weight increased progressively along the treatment and after 2 months showed a diffuse homogenous hypertrophy and hyperplasia of follicular cells, decreased amount of colloid and increased vascularity. After sixth month of treatment true nodules appeared with complex morphology.

Animals↗