Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Pliability”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23Linked to original sources

Fluorescence energy transfer indicates similar transient and equilibrium intermediates in staphylococcal nuclease folding.

Fluorescence resonance energy transfer (FRET) is one of the few methods available to measure the rate at which a folding protein collapses. Using staphylococcal nuclease in which a cysteine residue was engineered in place of Lys64, permitted FRET measurements of the distance between the donor tryptophan 140 and 5-[[2-[(iodoacetyl)-amino]ethyl]amino]naphthalene-1-sulfonic acid-labeled Cys64. These measurements were undertaken on both equilibrium partially folded intermediates at low pH (A states), as well as transient intermediates during stopped-flow refolding. The results indicate that there is an initial collapse of the protein in the deadtime of the stopped-flow instrument, corresponding to a regain of approximately 60% of the native signal, followed by three slower transients. This is in contrast to circular dichroism measurements which show only 20-25% regain of the native secondary structure in the burst phase. Thus hydrophobic collapse precedes the formation of substantial secondary structure. The first two detected transient intermediate species have FRET properties essentially identical with those of the previously characterized equilibrium A state intermediates, suggesting similar structures between the equilibrium and transient intermediates. The effects of anions on the folding of acid-unfolded staphylococcal nuclease, and urea on the unfolding of the resulting A states, indicates that in folding the protein becomes compact prior to formation of major secondary structure, whereas in unfolding the protein expands prior to major loss of secondary structure. Comparison of the kinetics of refolding of staphylococcal nuclease, monitored by FRET, and for a proline-free variant, indicate that folding occurs via two partially folded intermediates leading to a native-like species with one (or more) proline residues in a non-native conformation. For the A states an excellent correlation between compactness measured by FRET, and compactness determined from small-angle X-ray scattering, was observed. Further, a linear relationship between compactness and free energy of unfolding was noted. Formation of soluble aggregates of the A states led to dramatic enhancement of the FRET, consistent with intermolecular fluorescence energy transfer.

Amino Acid Substitution↗

Compromise and accommodation in ecotin, a dimeric macromolecular inhibitor of serine proteases.

Ecotin is a dimeric serine protease inhibitor from Escherichia coli which binds proteases to form a hetero-tetramer with three distinct interfaces: an ecotin-ecotin dimer interface, a larger primary ecotin-protease interface, and a smaller secondary ecotin-protease interface. The contributions of these interfaces to binding and inhibition are unequal. To investigate the contribution and adaptability of each interface, we have solved the structure of two mutant ecotin-trypsin complexes and compared them to the structure of the previously determined wild-type ecotin-trypsin complex. Wild-type ecotin has an affinity of 1 nM for trypsin, while the optimized mutant, ecotin Y69F, D70P, which was found using phage display technologies, inhibits rat trypsin with a K(i) value of 0.08 nM. Ecotin 67-70A, M84R which has four alanine substitutions in the ecotin-trypsin secondary binding site, along with the M84R mutation at the primary site, has a K(i) value against rat trypsin of 0.2 nM. The structure of the ecotin Y69F, D70P-trypsin complex shows minor structural changes in the ecotin-trypsin tetramer. The structure of the ecotin 67-70A, M84R mutant bound to trypsin shows large deviations in the tertiary and quaternary structure of the complex. The trypsin structure shows no significant changes, but the conformation of several loop regions of ecotin are altered, resulting in the secondary site releasing its hold on trypsin. The structure of several regions previously considered to be rigid is also significantly modified. The inherent flexibility of ecotin allows it to accommodate these mutations and still maintain tight binding through the compromises of the protein-protein interfaces in the ecotin-trypsin tetramer. A comparison with two recently described ecotin-like genes from other bacteria suggests that these structural and functional features are conserved in otherwise distant bacterial lineages.

Amino Acid Sequence↗

Structural and biochemical investigations of the catalytic mechanism of an NADP-dependent aldehyde dehydrogenase from Streptococcus mutans.

The NADP-dependent non-phosphorylating glyceraldehyde-3-phosphate dehydrogenase from Streptococcus mutans (abbreviated Sm-ALDH) belongs to the aldehyde dehydrogenase (ALDH) family. Its catalytic mechanism proceeds via two steps, acylation and deacylation. Its high catalytic efficiency at neutral pH implies prerequisites relative to the chemical mechanism. First, the catalytic Cys284 should be accessible and in a thiolate form at physiological pH to attack efficiently the aldehydic group of the glyceraldehyde-3-phosphate (G3P). Second, the hydride transfer from the hemithioacetal intermediate toward the nicotinamide ring of NADP should be efficient. Third, the nucleophilic character of the water molecule involved in the deacylation should be strongly increased. Moreover, the different complexes formed during the catalytic process should be stabilised. The crystal structures presented here (an apoenzyme named Apo2 with two sulphate ions bound to the catalytic site, the C284S mutant holoenzyme and the ternary complex composed of the C284S holoenzyme and G3P) together with biochemical results and previously published apo and holo crystal structures (named Apo1 and Holo1, respectively) contribute to the understanding of the ALDH catalytic mechanism. Comparison of Apo1 and Holo1 crystal structures shows a Cys284 side-chain rotation of 110 degrees, upon cofactor binding, which is probably responsible for its pK(a) decrease. In the Apo2 structure, an oxygen atom of a sulphate anion interacts by hydrogen bonds with the NH2 group of a conserved asparagine residue (Asn154 in Sm-ALDH) and the Cys284 NH group. In the ternary complex, the oxygen atom of the aldehydic carbonyl group of the substrate interacts with the Ser284 NH group and the Asn154 NH2 group. A substrate isotope effect on acylation is observed for both the wild-type and the N154A and N154T mutants. The rate of the acylation step strongly decreases for the mutants and becomes limiting. All these results suggest the involvement of Asn154 in an oxyanion hole in order to stabilise the tetrahedral intermediate and likely the other intermediates of the reaction. In the ternary complex, the cofactor conformation is shifted in comparison with its conformation in the C284S holoenzyme structure, likely resulting from its peculiar binding mode to the Rossmann fold (i.e. non-perpendicular to the plane of the beta-sheet). This change is likely favoured by a characteristic loop of the Rossmann fold, longer in ALDHs than in other dehydrogenases, whose orientation could be constrained by a conserved proline residue. In the ternary and C284S holenzyme structures, as well as in the Apo2 structure, the Glu250 side-chain is situated less than 4 A from Cys284 or Ser284 instead of 7 A in the crystal structure of the wild-type holoenzyme. It is now positioned in a hydrophobic environment. This supports the pK(a) assignment of 7.6 to Glu250 as recently proposed from enzymatic studies.

Acylation↗

Alternative conformations of a nucleic acid four-way junction.

A crystal structure of a 108 nucleotide RNA-DNA complex containing a four-way junction was solved at 3.1 A resolution. The structure of the junction differs substantially from the "stacked-X" conformation observed previously, due to a 135 degrees rotation of the branches. Comparison of the two conformers provides insight into the factors contributing to the flexibility of four-way junctions. The stacked-X conformation maximizes base-stacking but causes unfavorable repulsion between phosphate groups, whereas the 135 degrees -rotated "crossed" conformation minimizes electrostatic clashes at the expense of reduced base-stacking. Despite the large rotation of the branches, both junction structures exhibit an antiparallel arrangement of the continuous strands and opposite polarity of the crossover strands.

Base Pairing↗

Host range and variability of calcium binding by surface loops in the capsids of canine and feline parvoviruses.

Canine parvovirus (CPV) emerged in 1978 as a host range variant of feline panleukopenia virus (FPV). This change of host was mediated by the mutation of five residues on the surface of the capsid. CPV and FPV enter cells by endocytosis and can be taken up by many non-permissive cell lines, showing that their host range and tissue specificity are largely determined by events occurring after cell entry. We have determined the structures of a variety of strains of CPV and FPV at various pH values and in the presence or absence of Ca(2+). The largest structural difference was found to occur in a flexible surface loop, consisting of residues 359 to 375 of the capsid protein. This loop binds a divalent calcium ion in FPV and is adjacent to a double Ca(2+)-binding site, both in CPV and FPV. Residues within the loop and those associated with the double Ca(2+)-binding site were found to be essential for virus infectivity. The residues involved in the double Ca(2+)-binding site are conserved only in FPV and CPV. Our results show that the loop conformation and the associated Ca(2+)-binding are influenced by the Ca(2+) concentration, as well as pH. These changes are correlated with the ability of the virus to hemagglutinate erythrocytes. The co-localization of hemagglutinating activity and host range determinants on the virus surface implies that these properties may be functionally linked. We speculate that the flexible loop and surrounding regions are involved in binding an as yet unidentified host molecule and that this interaction influences host range.

Amino Acid Substitution↗

Crystal structure of Streptomyces olivaceoviridis E-86 beta-xylanase containing xylan-binding domain.

Xylanases hydrolyse the beta-1,4-glycosidic bonds within the xylan backbone and belong to either family 10 or 11 of the glycoside hydrolases, on the basis of the amino acid sequence similarities of their catalytic domains. Generally, xylanases have a core catalytic domain, an N and/or C-terminal substrate-binding domain and a linker region. Until now, X-ray structural analyses of family 10 xylanases have been reported only for their catalytic domains and do not contain substrate-binding domains. We have determined the crystal structure of a family 10 xylanase containing the xylan-binding domain (XBD) from Streptomyces olivaceoviridis E-86 at 1.9 A resolution. The catalytic domain comprises a (beta/alpha)(8)-barrel topologically identical to other family 10 xylanases. XBD has three similar subdomains, as suggested from a triple-repeat sequence, which are assembled against one another around a pseudo-3-fold axis, forming a galactose-binding lectin fold similar to ricin B-chain. The Gly/Pro-rich linker region connecting the catalytic domain and XBD is not visible in the electron density map, probably because of its flexibility. The interface of the two domains in the crystal is hydrophilic, where five direct hydrogen bonds and water-mediated hydrogen bonds exist. The sugar-binding residues seen in ricin/lactose complex are spatially conserved among the three subdomains in XBD, suggesting that all of the subdomains in XBD have the capacity to bind sugars. The flexible linker region enables the two domains to move independently and may provide a triple chance of substrate capturing and catalysis. The structure reported here represents an example where the metabolic enzyme uses a ricin-type lectin motif for capturing the insoluble substrate and promoting catalysis.

Amino Acid Motifs↗

Crystal structure of the beta-apical domain of the thermosome reveals structural plasticity in the protrusion region.

The crystal structure of the beta-apical domain of the thermosome, an archaeal group II chaperonin from Thermoplasma acidophilum, has been determined at 2.8 A resolution. The structure shows an invariant globular core from which a 25 A long protrusion emanates, composed of an elongated alpha-helix (H10) and a long extended stretch consisting of residues GluB245-ThrB253. A comparison with previous apical domain structures reveals a large segmental displacement of the protruding part of helix H10 via the hinge GluB276-ValB278. The region comprising residues GluB245-ThrB253 adopts an extended beta-like conformation rather than the alpha-helix seen in the alpha-apical domain. Consequently, it appears that the protrusions of the apical domains from group II chaperonins might assume a variety of context-dependent conformations during an open, substrate-accepting state of the chaperonin. Sequence variations in the protrusion regions that are found in the eukaryotic TRiC/CCT subunits may provide different structural propensities and hence serve different roles in substrate recognition.

Archaeal Proteins↗

Crystal structures of two functionally different thioredoxins in spinach chloroplasts.

Thioredoxins are small ubiquitous proteins which act as general protein disulfide reductases in living cells. Chloroplasts contain two distinct thioredoxins ( f and m) with different phylogenetic origin. Both act as enzyme regulatory proteins but have different specificities towards target enzymes. Thioredoxin f (Trx f), which shares only low sequence identity with thioredoxin m (Trx m) and with all other known thioredoxins, activates enzymes of the Calvin cycle and other photosynthetic processes. Trx m shows high sequence similarity with bacterial thioredoxins and activates other chloroplast enzymes. The here described structural studies of the two chloroplast thioredoxins were carried out in order to gain insight into the structure/function relationships of these proteins. Crystal structures were determined for oxidized, recombinant thioredoxin f (Trx f-L) and at the N terminus truncated form of it (Trx f-S), as well as for oxidized and reduced thioredoxin m (at 2.1 and 2.3 A resolution, respectively). Whereas thioredoxin f crystallized as a monomer, both truncated thioredoxin f and thioredoxin m crystallized as non-covalent dimers. The structures of thioredoxins f and m exhibit the typical thioredoxin fold consisting of a central twisted five-stranded beta-sheet surrounded by four alpha-helices. Thioredoxin f contains an additional alpha-helix at the N terminus and an exposed third cysteine close to the active site. The overall three-dimensional structures of the two chloroplast thioredoxins are quite similar. However, the two proteins have a significantly different surface topology and charge distribution around the active site. An interesting feature which might significantly contribute to the specificity of thioredoxin f is an inherent flexibility of its active site, which has expressed itself crystallographically in two different crystal forms.

Amino Acid Sequence↗

The 1.0 A crystal structure of Ca(2+)-bound calmodulin: an analysis of disorder and implications for functionally relevant plasticity.

Calmodulin (CaM) is a highly conserved 17 kDa eukaryotic protein that can bind specifically to over 100 protein targets in response to a Ca(2+) signal. Ca(2+)-CaM requires a considerable degree of structural plasticity to accomplish this physiological role; however, the nature and extent of this plasticity remain poorly characterized. Here, we present the 1.0 A crystal structure of Paramecium tetraurelia Ca(2+)-CaM, including 36 discretely disordered residues and a fifth Ca(2+) that mediates a crystal contact. The 36 discretely disordered residues are located primarily in the central helix and the two hydrophobic binding pockets, and reveal correlated side-chain disorder that may assist target-specific deformation of the binding pockets. Evidence of domain displacements and discrete backbone disorder is provided by translation-libration-screw (TLS) analysis and multiconformer models of protein disorder, respectively. In total, the evidence for disorder at every accessible length-scale in Ca(2+)-CaM suggests that the protein occupies a large number of hierarchically arranged conformational substates in the crystalline environment and may sample a quasi-continuous spectrum of conformations in solution. Therefore, we propose that the functionally distinct forms of CaM are less structurally distinct than previously believed, and that the different activities of CaM in response to Ca(2+) may result primarily from Ca(2+)-mediated alterations in the dynamics of the protein.

Adenosine Diphosphate↗

Two proteins with the same structure respond very differently to mutation: the role of plasticity in protein stability.

As part of a systematic study of the folding of protein structural families we compare the effect of mutation in two closely related fibronectin type III (fnIII) domains, the tenth fnIII domain of human fibronectin (FNfn10) and the third fnIII domain of human tenascin (TNfn3). This comparison of the two related proteins allows us to distinguish any anomalous response to mutation. Although they have very similar structures, the effect of mutation is very different. TNfn3 behaves like a "typical" protein, with changes in free energy correlated to the number of contacts lost on mutation. The loss of free energy upon mutation is significantly lower for FNfn10, particularly mutations of residues in the A, B and G strands. Remarkably, some of the residues involved are completely buried and closely packed in the core. In FNfn10 the regions of the protein that can accommodate mutation have previously been shown to be mobile. We propose that there is a "plasticity" in the peripheral regions of FNfn10 that allows it to rearrange to minimise the effect of mutations. This study emphasises the difficulties that might arise when making generalisations from a single member of a protein family.

Amino Acid Sequence↗

The adoption of a twisted structure of importin-beta is essential for the protein-protein interaction required for nuclear transport.

Importin-beta is a nuclear transport factor which mediates the nuclear import of various nuclear proteins. The N-terminal 1-449 residue fragment of mouse importin-beta (impbeta449) possesses the ability to bidirectionally translocate through the nuclear pore complex (NPC), and to bind RanGTP. The structure of the uncomplexed form of impbeta449 has been solved at a 2.6 A resolution by X-ray crystallography. It consists of ten copies of the tandemly arrayed HEAT repeat and exhibits conformational flexibility which is involved in protein-protein interaction for nuclear transport. The overall conformation of the HEAT repeats shows that a twisted motion produces a significantly varied superhelical architecture from the previously reported structure of RanGTP-bound importin-beta. These conformational changes appear to be the sum of small conformational changes throughout the polypeptide. Such a flexibility, which resides in the stacked HEAT repeats, is essential for interaction with RanGTP or with NPCs. Furthermore, it was found that impbeta449 has a structural similarity with another nuclear migrating protein, namely beta-catenin, which is composed of another type of helix-repeated structure of ARM repeat. Interestingly, the essential regions for NPC translocation for both importin-beta and beta-catenin are spatially well overlapped with one another. This strongly indicates the importance of helix stacking of the HEAT or ARM repeats for NPC-passage.

Amino Acid Sequence↗

The crystal structure of staphylococcal enterotoxin H: implications for binding properties to MHC class II and TcR molecules.

The X-ray structure of the superantigen staphylococcal enterotoxin H (SEH) has been determined at 1.69 A resolution. In this paper we present two structures of zinc-free SEH (apoSEH) and one zinc-loaded form of SEH (ZnSEH). SEH exhibits the conventional superantigen (SAg) fold with two characteristic domains. In ZnSEH one zinc ion per SEH molecule is bound to the C-terminal beta-sheet in the region implicated for major histocompatibility complex class II (MHC class II) binding in SEA, SED and SEE. Surprisingly, the zinc ion has only two ligating amino acid residues His206 and Asp208. The other ligands to the zinc ion are two water molecules. An extensive packing interaction between two symmetry-related molecules in the crystal, 834 A(2)/molecule, forms a cavity that buries the zinc ions of the molecules. This dimer-like interaction is found in two crystal forms. Nevertheless, zinc-dependent dimerisation is not observed in solution, as seen in the case of SED. A unique feature of SEH as compared to other staphylococcal enterotoxins is a large negatively charged surface close to the Zn(2+) site. The interaction of SEH with MHC class II is the strongest known among the staphylococcal enterotoxins. However, SEH seems to lack a SEB-like MHC class II binding site, since the side-chain properties of structurally equivalent amino acid residues in SEH and those in SEB-binding MHC class II differ dramatically. There is also a structural flexibility between the domains of SEH. The domains of two apoSEH structures are related by a 5 degrees rotation leading to at most 3 A difference in C(alpha) positions. Since the T-cell receptor probably interacts with both domains, SEH by this rotation may modulate its binding to different TcR Vbeta-chains.

Amino Acid Sequence↗

The virtuoso of versatility: POU proteins that flex to fit.

During the evolution of eukaryotes, a new structural motif arose by the fusion of genes encoding two different types of DNA-binding domain. The family of transcription factors which contain this domain, the POU proteins, have come to play essential roles not only in the development of highly specialised tissues, such as complex neuronal systems, but also in more general cellular housekeeping. Members of the POU family recognise defined DNA sequences, and a well-studied subset have specificity for a motif known as the octamer element which is found in the promoter region of a variety of genes. The structurally bipartite POU domain has intrinsic conformational flexibility and this feature appears to confer functional diversity to this class of transcription factors. The POU domain for which we have the most structural data is from Oct-1, which binds an eight base-pair target and variants of this octamer site. The two-part DNA-binding domain partially encircles the DNA, with the sub-domains able to assume a variety of conformations, dependent on the DNA element. Crystallographic and biochemical studies have shown that the binary complex provides distinct platforms for the recruitment of specific regulators to control transcription. The conformability of the POU domain in moulding to DNA elements and co-regulators provides a mechanism for combinatorial assembly as well as allosteric molecular recognition. We review here the structure and function of the diverse POU proteins and discuss the role of the proteins' plasticity in recognition and transcriptional regulation.

Amino Acid Sequence↗

Novel dimerization fold of RAP30/RAP74 in human TFIIF at 1.7 A resolution.

General transcription factor IIF (TFIIF) is required for transcription by RNA polymerase II; it consists minimally of a heterodimer of RNA polymerase-associated proteins RAP30 and RAP74. According to solution and mutagenesis studies, the multiple domains of RAP30 and RAP74 bind PolII, TFIIB, TAF250 and DNA in interactions that are essential for transcription initiation and elongation. The X-ray structure of the RAP30/RAP74 interaction domains at 1.7 A resolution reveals a novel "triple barrel" dimerization fold and suggests with mutant data that interactions with the transcription apparatus are mediated not only by this tripartite beta-barrel, but also via flexible loops and alpha and beta-structures extending from it.

Amino Acid Motifs↗

Solution structure of the two N-terminal RNA-binding domains of nucleolin and NMR study of the interaction with its RNA target.

Nucleolin is an abundant 70 kDa nucleolar protein involved in many aspects of ribosomal RNA biogenesis. The central region of nucleolin contains four tandem consensus RNA-binding domains (RBD). The two most N-terminal domains (RBD12) bind with nanomolar affinity to an RNA stem-loop containing the consensus sequence UCCCGA in the loop. We have determined the solution structure of nucleolin RBD12 in its free form and have studied its interaction with a 22 nt RNA stem-loop using multidimensional NMR spectroscopy. The two RBDs adopt the expected beta alpha beta beta alpha beta fold, but the position of the beta 2 strand in both domains differs from what was predicted from sequence alignments. RBD1 and RBD2 are significantly different from each others and this is likely important in their sequence specific recognition of the RNA. RBD1 has a longer alpha-helix 1 and a shorter beta 2-beta 3 loop than RBD2, and differs from most other RBDs in these respects. The two RBDs are separated by a 12 amino acid flexible linker and do not interact with one another in the free protein. This linker becomes ordered when RBD12 binds to the RNA. Analysis of the observed NOEs between the protein and the RNA indicates that both RBDs interact with the RNA loop via their beta-sheet. Each domain binds residues on one side of the loop; specifically, RBD2 contacts the 5' side and RBD1 contacts the 3'.

Amino Acid Sequence↗

Polymerization, three-dimensional structure and mechanical properties of Ddictyostelium versus rabbit muscle actin filaments.

To assess more systematically functional differences among non-muscle and muscle actins and the effect of specific mutations on their function, we compared actin from Dictyostelium discoideum (D-actin) with actin from rabbit skeletal muscle (R-actin) with respect to the formation of filaments, their three-dimensional structure and mechanical properties. With Mg(2+) occupying the single high-affinity divalent cation-binding site, the course of polymerization is very similar for the two types of actin. In contrast, when Ca(2+ )is bound, D-actin exhibits a significantly longer lag phase at the onset of polymerization than R-actin. Crossover spacing and helical screw angle of negatively stained filaments are similar for D and R-F-actin filaments, irrespective of the tightly bound divalent cation. However, three-dimensional helical reconstructions reveal that the intersubunit contacts along the two long-pitch helical strands of D-(Ca)F-actin filaments are more tenuous compared to those in R-(Ca)F-actin filaments. D-(Mg)F-actin filaments on the other hand exhibit more massive contacts between the two long-pitch helical strands than R-(Mg)F-actin filaments. Moreover, in contrast to the structure of R-F-actin filaments which is not significantly modulated by the divalent cation, the intersubunit contacts both along and between the two long-pitch helical strands are weaker in D-(Ca)F-actin compared to D-(Mg)F-actin filaments. Consistent with these structural differences, D-(Ca)F-actin filaments were significantly more flexible than D-(Mg)F-actin. Taken together, this work documents that despite being highly conserved, muscle and non-muscle actins exhibit subtle differences in terms of their polymerization behavior, and the three-dimensional structure and mechanical properties of their F-actin filaments which, in turn, may account for their functional diversity.

Actin Cytoskeleton↗

Insights into the molecular recognition of the 5'-GNN-3' family of DNA sequences by zinc finger domains.

In order to construct zinc finger domains that recognize all of the possible 64 DNA triplets, it is necessary to understand the mechanisms of protein/DNA interactions on the molecular level. Previously we reported 16 zinc finger domains which had been characterized in detail to bind specifically to the 5'-GNN-3' family of DNA sequences. Artificial transcription factors constructed from these domains can regulate the expression of endogenous genes. These domains were created by phage-display selection followed by site-directed mutagenesis. A total of 84 mutants of a three-domain zinc finger protein have been analyzed for their DNA-binding specificity. Here, we report the results of this systematic and extensive mutagenesis study. New insights into zinc finger/DNA interactions were obtained by combining specificity data with computer modeling and comparison with known structural data from NMR and crystallographic studies. This analysis suggests that unusual cross-strand and inter-helical contacts are made by some of these proteins, and the general orientation of the recognition helix to the DNA is flexible, even when constrained by flanking zinc finger domains. These findings disfavor the utility of existing simple recognition codes and suggest that highly specific domains cannot be obtained from phage display alone in most cases, but only in combination with rational design. The molecular basis of zinc finger/DNA interaction is complex and its understanding is dependent on the analysis of a large number of proteins. This understanding should enable us to refine rapidly the specificity of other zinc finger domains, as well as polydactyl proteins constructed with these domains to recognize extended DNA sequences.

Amino Acid Sequence↗

Formation of nNOS/PSD-95 PDZ dimer requires a preformed beta-finger structure from the nNOS PDZ domain.

PDZ domains are modular protein units that play important roles in organizing signal transduction complexes. PDZ domains mediate interactions with both C-terminal peptide ligands and other PDZ domains. Here, we used PDZ domains from neuronal nitric oxide synthase (nNOS) and postsynaptic density protein-95 (PSD-95) to explore the mechanism for PDZ-dimer formation. The nNOS PDZ domain terminates with a approximately 30 residue amino acid beta-finger peptide that is shown to be required for nNOS/PSD-95 PDZ dimer formation. In addition, formation of the PDZ dimer requires this beta-finger peptide to be physically anchored to the main body of the canonical nNOS PDZ domain. A buried salt bridge between the beta-finger and the PDZ domain induces and stabilizes the beta-hairpin structure of the nNOS PDZ domain. In apo-nNOS, the beta-finger peptide is partially flexible and adopts a transient beta-strand like structure that is stabilized upon PDZ dimer formation. The flexibility of the NOS PDZ beta-finger is likely to play a critical role in supporting the formation of nNOS/PSD-95 complex. The experimental data also suggest that nNOS PDZ and the second PDZ domain of PSD-95 form a "head-to-tail" dimer similar to the nNOS/syntrophin complex characterized by X-ray crystallography.

Amino Acid Motifs↗