Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “BERYLLIUM”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23Linked to original sources

Novel potentiometric sensor for monitoring beryllium based on naphto-9-crown-3.

A novel poly(vinyl chloride) (PVC) membrane electrode based on naphto-9-crown-3 was prepared and tested for the selective detection of beryllium ions. A suitable lipophilicity of the carrier and appropriate coordination ability were found to be essential for designing an electrode with good response characteristics. A PVC membrane with 9% naphtho-9-crown-3 carrier, 58% o-NPOE plasticizer, 3% tetraphenylborate anionic excluder and 30% poly(vinyl chloride) satisfied these requirements. The proposed sensor displayed a linear response to beryllium over a wide concentration range of 1.0 x 10(-1)-8.0 x 10(-6) M with a Nernstian slope of 29.5 mV per decade. The electrode showed very short response time (<15 s) and could be used in the pH range 3.5-9.0. The selectivity coefficient for alkali, alkaline earth, transition and heavy metal ions was smaller than 4.0 x 10(-4). The sensor was successfully used as an indicator electrode in the potentiometric titration of Be2+ with EDTA. The proposed Be(II) sensor was also used for the determination of Be2+ ions in binary mixtures.

Journal Article↗

[Dynamic comparative study of the intraalveolar cell population after intratracheal injection of beryllium hydroxide and aluminum hydroxide in the rat].

A sequential quantitative analysis of free alveolar cells was performed on S.P.F. rats after intratracheal injection of Be (OH)2 and Al (OH)3. The induced lesions were entirely restored 20 days after the initial injection. Beryllium hydroxide inhibited DNA synthesis in the free alveolar macrophages and the transeptal cellular flow could be evidenced. Aluminium hydroxide increased the number of free cells without inhibiting DNA synthesis. Quantitative variations of polymorphonuclears, lymphocytes and macrophages were correlated with changes in the alveolar environment. A strong direct correlation between the number of lymphocytes and DNA synthetizing macrophages was shown out. This reaction was not observed in beryllium treated rats.

Aluminum↗

Chronic beryllium disease.

Chronic beryllium disease is a multisystem granulomatous disease caused by industrial exposure to beryllium dust or fumes. It is thought to represent a hypersensitivity disorder rather than a true pneumoconiosis. The lung is the primary organ of involvement, and many of the radiographic features resemble sarcoid.

Berylliosis↗

Casting accuracy of a nickel and beryllium-free cobalt-chromium alloy for crown and bridge prostheses and resin-bonded bridges.

In the 1970's economic factors dictated the development of alternatives to gold alloys in dentistry in the USA and in Europe. A similar development has not occurred in Sweden because of different laws. Alloys that contain nickel and beryllium present a health hazard and are therefore of little interest to the Swedish market. A review of the literature shows that castings of base-metal alloys are less accurate than castings of conventional gold alloys and of low gold alloys. However, in long-span-bridges and in thin resin-bonded cast restorations, their physical and mechanical properties are superior to those of the gold alloys. In this study the casting accuracy of a nickel- and beryllium-free cobalt-chromium alloy, Neobond II Special, is investigated. Neobond II Special was found to be less accurate than Sjödings C-guld. The marginal discrepancies of the castings were small, however, when the castings were oversized. It also proved to be technique sensitive to conventional dental laboratory procedures. Thus, it seems difficult to get castings with an acceptable retention as well as small marginal discrepancies when using the base-metal alloy.

Chemical Phenomena↗

Antidotes for acute beryllium sulfate intoxication in mice.

Eleven water soluble chelating agents were tested as antidotes for acute beryllium sulfate intoxication in mice. The most effective of these was sodium 4,5-dihydroxy-1,3-benzenedisulfonate (Tiron). At the level of administration of beryllium used, aurin tricarboxylic acid is not an antidote.

Animals↗

Glycogen synthase kinase-3 inhibition by lithium and beryllium suggests the presence of two magnesium binding sites.

Lithium inhibits (Li(+)) glycogen synthase kinase-3 (GSK-3) by competition for magnesium (Mg(2+)), but not ATP or substrate. Here, we show that the group II metal ion beryllium (Be(2+)) is a potent inhibitor of GSK-3 and competes for both Mg(2+) and ATP. Be(2+) also inhibits the related protein kinase cdc2 at similar potency, but not MAP kinase 2. To compare the actions of Li(+) and Be(2+) on GSK-3, we have devised a novel dual inhibition analysis. When Be(2+) and ADP are present together each interferes with the action of the other, indicating that both agents inhibit GSK-3 at the ATP binding site. In contrast, Li(+) exerts no interference with ADP inhibition or vice versa. We find, however, that Li(+) and Be(2+) do interfere with each other. These results suggest that Be(2+) competes for two distinct Mg(2+) binding sites: one is Li(+)-sensitive and the other, which is Li(+)-insensitive, binds the Mg:ATP complex.

Adenosine Diphosphate↗

Toxaphene, but not beryllium, induces human neutrophil chemotaxis and apoptosis via reactive oxygen species (ROS): involvement of caspases and ROS in the degradation of cytoskeletal proteins.

Chemicals of environmental concern are known to alter the immune system. Recent data indicate that some contaminants possess proinflammatory properties by activating neutrophils, an area of research that is still poorly investigated. We have previously documented that toxaphene activates human neutrophils to produce reactive oxygen species (ROS) and accelerates apoptosis by a yet unknown mechanism. In this study, we found that toxaphene induces another neutrophil function, chemotaxis. Furthermore, we found that toxaphene induces both chemotaxis and apoptosis via a ROS-dependent mechanism, since these responses were blocked by the addition of catalase to the culture. In addition, toxaphene was found to induce the degradation of the cytoskeletal proteins gelsolin, paxillin, and vimentin during apoptosis, and this was reversed by the addition of z-VAD-FMK (caspase inhibitor) or catalase, demonstrating the importance of caspases and ROS in this process. In contrast to toxaphene, we found that beryllium does not induce superoxide production, and, this correlates with its inability to induce chemotaxis and apoptosis. We conclude that toxaphene induces chemotaxis and apoptosis via ROS and that caspases and ROS are involved in the degradation of cytoskeletal proteins.

Amino Acid Chloromethyl Ketones↗

Dose-response relationships between inhaled beryllium metal and lung toxicity in C3H mice.

Inhaled beryllium (Be) can induce a range of adverse pulmonary responses in animals and humans including acute pneumonitis, chronic granulomatous lung disease, and cancer. To facilitate comparisons with our previous data describing Be toxicity in rats, we evaluated the toxic effects of inhaled Be metal in mice. Groups of 34 strain C3H/HeJ mice were acutely exposed by the nose-only route to aerosolized Be metal to achieve measured initial lung burdens of 0, 1.7, 2.6, 12, or 34 microg. All mice received aerosolized 85 Sr-labeled fused aluminosilicate particles (85 Sr-FAPs) immediately before their Be exposure so that the influence of Be on lung retention of these poorly soluble tracer particles could be externally quantitated. Groups of mice were euthanized at 8, 15, 40, 90, 210, and 350 days after exposure for evaluation of histopathological changes and for cytologic and biochemical indicators of lung damage measured in bronchoalveolar lavage fluid. Clearance of 85 Sr-FAP tracer particles through 196 days after exposure was delayed in mice receiving the 12 and 34 microg Be lung burdens, but not the 1.7 or 2.6 microg lung burdens. Increased total cell numbers, increased percentage of neutrophils, and elevated levels of total protein and the activities of beta-glucuronidase and lactate dehydrogenase in bronchoalveolar lavage fluid were observed in the two highest Be lung burden groups compared with controls. Lung lesions included particle-containing macrophages, granulomatous pneumonia, lymphocytic interstitial aggregates, and mononuclear interstitial infiltrates. These lesions were occasionally seen in mice receiving the 2.6 microg lung burden, were present in most of the mice receiving 12 or 34 microg lung burdens, and were generally increased in severity with time and lung burden. Thus, we have demonstrated that a single, acute inhalation exposure to Be metal can chronically retard particle clearance and induce lung damage in mice. The initial lung burdens used caused responses ranging from no apparent effects to significant Be-induced responses. A comparison of these data with our previous data from rats indicates that the mass of Be metal required to induce lung damage in mice is similar to that needed for rats. When expressed on a lung weight-normalized basis, mice appeared to be more resistant to the toxic effects of inhaled Be than rats.

Animals↗

Differential scanning calorimetric study of the complexes of modified myosin subfragment 1 with ADP and vanadate or beryllium fluoride.

The effects of various modifications of rabbit skeletal myosin subfragment 1 on the thermal denaturation of subfragment 1 in ternary complexes with Mg-ADP and orthovanadate (V1) or beryllium fluoride (BeFx) have been studied by differential scanning calorimetry. It has been shown that specific modifications of SH1 group of Cys-707 by different sulfhydryl reagents, trinitrophenylation of Lys-83, and reductive methylation of lysine residues promote the decomposition of the S1.ADP.Vi complex and change the character of structural transitions of the subfragment 1 molecule induced by the formation of this complex, but they have much less or no influence on subfragment 1 thermal stability in the S1.ADP.BeFx complex. Thus, the differential scanning calorimetric studies on modified subfragment 1 preparations reveal a significant difference between S1.ADP.Vi and S1.ADP.BeFx complexes. It is suggested that S1.ADP.Vi and S1.ADP.BeFx complexes represent structural analogues of different transition states of the ATPase cycle, namely the intermediate states S1**.ADP.Pi and S1*.ATP, respectively. It is also proposed that during formation of the S1.ADP.Vi complex the region containing both Cys-707 and Lys-83 plays an important role in the spread of conformational changes from the active site of subfragment 1 ATPase throughout the structure of the entire subfragment 1 molecule. In such a case, the effects of reductive methylation of lysine residues on the subfragment 1 structure in the S1.ADP.Vi complex are related to the modification of Lys-83.

Adenosine Diphosphate↗

Stimulatory and cytotoxic effects of beryllium on proliferation of mouse spleen lymphocytes in vitro.

Low concentrations (1-5 microM) of beryllium (Be) salts were weakly mitogenic to mouse spleen cells in vitro as measured by an hydroxyurea-sensitive 2-3fold increase in pulse labelled [3H]-thymidine incorporation into lymphocyte DNA. It is proposed the activation may be induced by a direct interaction of Be2+ with the lymphocyte membranes. Higher concentrations of Be2+ (5-20 microM) produced a gradual loss of the stimulatory response, possibly as the result of either a limited cytotoxic effect or by the established property of intracellularly-accumulated Be2+ to inhibit cell division. In contrast, Concanavalin A-stimulated lymphocyte mitogenesis was markedly decreased by a 20-h preincubation of splenocytes with micromolar concentrations of Be2+, whereas similar pretreatment with lower concentrations (0.1 microM) actually enchanced the subsequent proliferative response. In both cases, supplementary addition of 0.1-1% peritoneal macrophages increased the level of Concanavalin A stimulation. It is concluded, therefore, that inhibition of the proliferative response to accessory cell-dependent mitogens may result from dose-dependent destruction by Be2+ of the macrophage/adherent cell population.

Animals↗

Inhibition of nuclear-protein phosphorylation in vitro by beryllium.

Endogenous cyclic-nucleotide-independent protein phosphorylation by ATP at pH 6.5 in adult rat liver nuclei in vitro is inhibited by beryllium (Be2+), but under the same conditions nuclear-protein dephosphorylation appears to be insensitive to Be2+. Prior incubation of nuclei with Be2+ is necessary to demonstrate the inhibition of phosphorylation, which increases as the pH is decreased from pH 8.0 to 6.5. The extent of inhibition can be related to the level of nuclear Be2+ binding and, evidence suggests, may be caused by direct or indirect interference by Be2+ with Mg2+ binding sites normally required to facilitate protein phosphorylation.

Animals↗

Direct determination of traces of beryllium with eriochrome cyanine R by diffuse reflection spectroscopy using chromaticity functions.

Chromaton-N-super and Silasorb C18 (SMT C18) were compared as solid supports for the direct determination of the immobilized beryllium complexes with eriochrome cyanine R by diffuse reflection spectroscopy. The advantage of Silasorb C18 was shown. A detection limit of 0.0002 microg mL(-1) could be reached in a 100-mL sample. The method was used for the analysis of real water samples.

Benzenesulfonates↗

Comparative analysis of the protein folding activities of two chaperonin subunits of Thermococcus strain KS-1: the effects of beryllium fluoride.

We conducted a comparative analysis of the effects of beryllium fluoride (BeFx) on protein folding mediated by the alpha- and beta-subunit homooligomers (alpha16mer or beta16mer) from the hyperthermophilic archaeum Thermococcus strain KS-1. BeFx inhibited the ATPase activities of both alpha16mer and beta16mer with equal efficiency. This indicated that BeFx replaces the gamma-phosphate of chaperonin-bound ATP, thereby forming a stable chaperonin-ADP-BeFx complex. In the presence of ATP and BeFx, both of the two chaperonin subunits mediated green fluorescent protein (GFP) folding. Gel filtration chromatography revealed that the refolded GFP was retained by both chaperonins. Protease digestion and electron microscopic analyses showed that both chaperonin-ADP-BeFx complexes of the two subunits adopted a symmetric closed conformation with the built-in lids of both rings closed and that protein folding took place in their central cavities. These data indicated that basic protein folding mechanisms of alpha16mer and beta16mer are likely similar although there were some apparent differences. While beta16mer-mediated GFP refolding in the presence of ATP-BeFx that proceeded more rapidly than in the presence of ATP alone and reached a twofold higher plateau than that achieved with AMP-PNP, the folding mediated by the alpha16mer that proceeded with much lower yields. A mutant of alpha16mer, trapalpha, which traps the unfolded and partially folded substrate protein, did not affect the ATP-BeFx-dependent GFP folding by beta16mer but it suppressed that mediated by alpha16mer to the level of spontaneous folding. These results suggested that beta16mer differed from the alpha16mer in nucleotide binding affinity or the rate of nucleotide hydrolysis.

Adenosine Diphosphate↗

Analysis of TNF-alpha promoter polymorphisms in the susceptibility to beryllium hypersensitivity.

BACKGROUND AND AIM OF THE WORK: In susceptible individuals beryllium (Be)-exposure may cause Be-hypersensitivity (BH), leading to a spectrum of immune abnormalities ranging from the systemic responsiveness to Be to the CD4+ T-cell dominated chronic granulomatous pneumonitis known as berylliosis. Two gene markers have been previously associated with berylliosis: HLA-DP allelic variants carrying glutamate in position 69 of the beta-chain and the high TNF-alpha production-associated TNF-alpha promoter allele TNFA2. Since a number of TNF-alpha promoter sequence variants have been associated with higher or lower gene-expression, the entire TNF-alpha promoter region was screened for BH-associated variants. METHODS: Denaturating High Performance Liquid Chromatography (DHPLC) analysis followed by DNA sequence analysis of the heteroduplex observed was performed on a DNA bank obtained from a Be-exposed population composed of 73 subjects with BH and 43 Be-exposed controls. RESULTS: The data show that the TNF-alpha TNFA2 variant (genotypic frequency: BH 26.7%, Be-exposed controls 5.8%; p < 0.0001), the -857T variant (BH 19.7%, Be-exposed controls 10.5%; p = 0.045) are significantly associated with BH and there is no linkage disequilibrium between them. Further, 64.4% of BH subjects carried at least one of higher TNF-alpha production-associated polymorphisms (Be-exposed controls 34.8%; p = 0.0036). CONCLUSIONS: The finding that TNF-alpha production-associated polymorphisms are carried at higher frequency by BH-affected compared to Be-exposed controls suggests that the TNF-alpha may play a central role in the determination of susceptibility to BH.

Adult↗

Binding of beryllium to nuclear acidic proteins.

In vitro beryllium (Be) binding to rat liver nuclei has been reassessed (KAss = 2.0 X 10(6) M: n = 17 nmol Be/mg protein). Be also binds to rat liver nucleoli (KAss approx. 4 X 10(6) M: n = 10 nmol Be/mg protein). Examination of rat liver chromatin fractionated on a hydroxyapatite column shows that Be does not bind to histone or to the non-histone protein eluted by 0.05 M sodium phosphate. Be is strongly bound to the non-histone proteins eluted by 0.2 M sodium phosphate (KAss = 1.1 X 10(6) M: n = 55 nmol Be/mg protein) and also to the same extent to the fraction containing DNA which is subsequently eluted from the column. Evidence is provided that the latter binding is not due to DNA. The fractions containing the Be-binding proteins also contain the proteins which are phosphorylated to the greater extent.

Animals↗

Calorimetric characterization of the stable complex of myosin subfragment 1 with ADP and beryllium fluoride.

The thermal unfolding of the myosin subfragment 1 (S1) in its stable complex with ADP and beryllium fluoride (S1.ADP.BeF3-) was studied by differential scanning calorimetry. It has been shown that the structure of the S1 molecule in the S1.ADP.BeF3- complex is similar to that of S1 in its complex with ADP and orthovanadate (S1.ADP.Vi) but differs radically from that of nucleotide-free S1 and S1 in the S1.ADP complex. It is concluded that the S1.ADP.BeF3- complex can be considered, like the S1.ADP.Vi complex, a stable structural analogue of the myosin head.ADP.Pi transition state of the myosin-catalyzed ATP hydrolysis.

Adenosine Diphosphate↗

The difference between ADP-beryllium fluoride and ADP-aluminium fluoride complexes of the spin-labeled myosin subfragment 1.

Electron paramagnetic resonance (EPR) spectroscopy was used for investigation of the structure of spin-labeled myosin subfragment 1 (S1) containing ADP and phosphate analogues, such as orthovanadate, aluminium fluoride (AlF4), and beryllium fluoride (BeFx). It has been shown that the local conformational changes in the region of Cys-707, induced by formation of the S1-ADP-BeFx complex, differ from those of S1 containing ADP-AlF4 or other phosphate analogues but are similar to the changes which occur in the presence of ADP or ATP gamma S. It is suggested that S1-ADP-AlF4 and S1-ADP-BeFx complexes represent structural analogues of different transition states of the ATPase cycle, namely the intermediate states S1**-ADP-P(i) and S1*-ATP, respectively.

Adenosine Diphosphate↗

The effect of three different surface treatments on the tensile strength of the resin bond to nickel-chromium-beryllium alloy.

The effect of three different metal surface treatments on the tensile strength of the resin bond to non-noble nickel-chromium-beryllium alloy was studied by bonding metal to metal. Chemical etching of the metal for 1 hour obtained the highest strength, followed by air-abraded bond specimens. Lowest strength was obtained with the gel-etch method. All resulted in clinically acceptable values.

Acid Etching, Dental↗