Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Sodium Compounds”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22Linked to original sources
PubMed2002

The effect of salts on the micellization temperature of aqueous poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) solutions and the dissolution rate and water diffusion coefficient in their corresponding gels.

Studies were performed to examine the effect of ionic salts on phase transitions, dissolution rates, and diffusion coefficients of water in gels of poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) with polymer concentrations ranging from 22 to 32% w/w and salt concentrations ranging from 0 to 1.5% w/w. Salts tested include Na(3)PO(4), Na(2)SO(4), Na(2)HPO(4), NaH(2)PO(4), NaCH(3)CO(2), NaCl, and KI. Micellization transition temperatures were obtained using differential scanning calorimetry. The dissolution rates were obtained by measurement of the surface erosion rates, and diffusion coefficients were obtained by using a method to analyze the intrusion of water into the aqueous gels. It was found that salts had no effect on the dissolution rate of the polymer gels into deionized water. However, when the salt concentration in the aqueous dissolution media was adjusted to match the concentration in the gels, the dissolution rate of the polymer gel decreased with increasing salt concentration. The salts also had a profound effect on the critical micellization temperature (CMT) and the diffusion coefficient of water within the gel. The diffusion coefficient and CMT decreased in the presence of salts. The magnitude of these effects was comparable to their placement on the Hofmeister, or lyotropic series for salts. The effects of polymer and salt concentrations on the CMT were quantified, and a single correlation was proposed to predict the micellization temperatures for a wide range of salt and polymer concentrations.

Diffusion↗
PubMed2000

Multiple-quantum cross-polarization and two-dimensional MQMAS NMR of quadrupolar nuclei.

Cross-polarization from (1)H to the multiple-quantum coherences of a quadrupolar nucleus is used in combination with the two-dimensional multiple-quantum magic angle spinning (MQMAS) NMR experiment in order to extract high-resolution CPMAS NMR spectra. The technique is demonstrated on (23)Na (S = 3/2), (17)O, (27)Al (both S = 5/2), and (45)Sc (S = 7/2) nuclei, showing the applicability of multiple-quantum cross-polarization to systems with differing spin quantum number, gyromagnetic ratio, and relative nuclide abundance. The utility of this two-dimensional MAS NMR experiment for spectral editing and site-specific measurement of cross-polarization intensities is demonstrated. The possibility of direct cross-polarization to higher order multiple-quantum coherences is also considered and three-, five-, and seven-quantum cross-polarized (45)Sc MAS NMR spectra are presented.

Magnetic Resonance Spectroscopy↗
PubMed1992

Mutagenic activity of copper(II) chromate and dichromate complexes with polypyridines.

Copper(II) chromate and dichromate complexes with 2,2'-bipyridyl and 1,10-phenathroline were tested for their mutagenic activity in the standard Ames test. All of six tested complexes exhibited markedly lower mutagenic activity than the reference compounds--potassium dichromate and sodium chromate. The blockage of Cr(VI) reduction capability in the presence of the complex Cu2+ ion and the competition between copper and chromium ions in the interaction with cellular components are discussed in the light of the results of our previous chemical study.

2,2'-Dipyridyl↗
PubMed2003

Improving the detection limit of anion-selective electrodes: an iodide-selective membrane with a nanomolar detection limit.

The lower detection limit and the selectivity behavior of anion-selective electrodes (ISEs) are improved by using optimized inner solutions and membrane compositions. With a membrane based on the recently described ionophore [9]mercuracarborand-3, a detection limit of 2 x 10(-9) M has been achieved for iodide. Nevertheless, the improvements are less pronounced than in the case of cation ISEs. This is mainly due to the fact that so far no anion ISE is known with the extremely high selectivities of cation ISEs. If the membrane does not contain an ionophore, leaching of the ion exchanger from the membrane into the sample is also a relevant limiting factor except for ion exchangers of very high lipophilicity.

Anions↗
PubMed2001

Regeneration of perchlorate (ClO4-)-loaded anion exchange resins by a novel tetrachloroferrate (FeCl4-) displacement technique.

Selective ion exchange is one of the preferred treatment technologies for removing low levels of perchlorate (ClO4-) from contaminated water because of its high efficiency and minimal impact on water quality through the addition or removal of chemicals and nutrients. However, the exceptionally high affinity of ClO4- for type I anion-exchange resins makes regeneration with conventional NaCl brine extremely difficult and costly for practical applications. The present study entails the development of a novel regeneration methodology applicable to highly selective anion-exchange resins. Tetrachloroferrate (FeCl4-) anions, formed in a solution of ferric chloride and hydrochloric acid (e.g., 1 M FeCl3 and 4 M HCl), were found to effectively displace Cl04- anions that were sorbed on the resin. A mass-balance analysis indicated that a nearly 100% recovery of ion-exchange sites was achieved by washing with as little as approximately 5 bed volumes of the regenerant solution in a column flow-through experiment There was no significant deterioration of the resin's performance with respect to ClO4- removal after repeated loading and regeneration cycles. Thus, the new methodology may offer a cost-effective means to regenerate ClO4- -loaded resins with improved regeneration efficiency, recovery, and waste minimization in comparison with conventional brine regeneration techniques.

Anion Exchange Resins↗
PubMed2000

Synthesis and characterization of square planar nickel(II)-arylthiolate complexes with the biphenyl-2,2'-dithiolate ligand.

Two new NiIIS4 complexes with the biphenyl-2,2'-dithiolate ligand (L) are reported. The dinuclear complex 1, [Ni2L3]2-, was formed in the reaction of 2-3 equiv of Na2L and [NiCl4]2- and the mononuclear complex [NiL2]2- (2) by using 4-10 equiv of Na2L. Complexes 1 and 2 have been crystallographically characterized. (Et4N)2[1].0.5S2Ph2, CH3CN: C60H71N3Ni2S7, triclinic, P1, a = 13.806(2) A, b = 14.267(2) A, c = 16.873(2) A, alpha = 69.263(10) degrees, beta = 69.267(8) degrees, gamma = 83.117(10) degrees, Z = 2, R1 = 0.0752 (wR2 = 0.2011). (Et4N)(Na.CH3CN)[2]: C34H39N2NaNiS4, triclinic, P1, a = 9.9570(10) A, b = 13.2670(10) A, c = 13.9560(10) A, alpha = 108.489(7) degrees, beta = 90.396(6) degrees, gamma = 103.570(4) degrees, Z = 2, R1 = 0.0390 (wR2 = 0.0995). Both complexes are square planar about the nickel ion in the solid state as well as in solution. Most Ni(II)-thiolate complexes are square planar except the tetrahedral mononuclear complexes with monodentate arylthiolate ligands that cannot force a square planar geometry. The ligand (L) has some flexibility to change its bite angle via the phenyl-phenyl bond and should not force a planar geometry on its complexes either. Therefore, it is interesting that 2 has adopted a square planar structure. Complex 2 readily converts to 1 in solution when not in the presence of excess L in a process that is presumably similar to that known for other mononuclear, bidentate ligated Ni(II) complexes. Both complexes, at least in the solid state, appear to have an inclination to bind another metal ion on one face of the complex (Ni2+ in 1, Na+ in 2). We hope to take advantage of this in future work to synthesize relevant model complexes for the active sites of the nickel-iron hydrogenases after suitable modifications are made to L.

Binding Sites↗
PubMed1988

DCCD-sensitive Na+-transport in the membrane vesicles of Halobacterium halobium.

The effects of N,N'-dicyclohexylcarbodiimide (DCCD) and various ionophores on light-induced 22Na+-transport were studied in right-side-out membrane vesicles from Halobacterium halobium R1M1. The light-induced Na+ efflux was inhibited at the same DCCD concentration (greater than 40 nmol/mg protein) as required for inhibition of the Na+-dependent membrane potential (delta phi) formation. This supports our previous indication that the DCCD-sensitive, Na+-dependent transformation of pH-gradient (delta pH) into delta phi is mediated by Na+/H+-antiporter (Murakami, N. and Konishi, T. (1985) J. Biochem. 98, 897-907). FCCP or a combination of valinomycin and triphenyltin (TPT) inhibits the light-induced Na+ efflux in accordance with the notion of protonmotive force (delta mu H+)-driven antiporter. However, a marked lag in initiation of the Na+ efflux occurred in the presence of valinomycin, TPMP+, or a small amount of FCCP, suggesting that a gating step is involved in the Na+ efflux. On the other hand, the delta pH-dissipating ionophore TPT did not cause the lag. A simultaneous determination of delta phi, delta pH, and Na+ efflux rate at the initial stage of illumination revealed that the antiporter is gated by delta phi rather than delta mu H+.

Biological Transport↗
PubMed2001

Mechanical properties of glass-only porcelains prepared by the use of two feldspathic frits with different thermal properties.

Low- and non-leucite-containing commercial porcelains with low firing temperatures have become popular. However, improving the strength of glass porcelains is difficult. The purpose of this study was to determine if dispersed glass particles could be used as a reinforcing agent for an all-glass porcelain. We produced 3 feldspathic glasses (high-fusing, medium-fusing, low-fusing) by melting powders consisting of potassium-feldspar and 0, 5, or 20 mass% Na2O, respectively. For high-fusing, medium-fusing, and low-fusing feldspathic glasses, the deformation temperatures were 945 degrees C, 647 degrees C, and 518 degrees C, and the thermal expansion coefficient values were 8.6 x 10(-6)/degrees C, 10.3 x 10(-6)/degrees C, and 13.4 x 10(-6)/degrees C between 25 degrees C and the glass-transition temperature, respectively. The high-fusing-glass (or medium-fusing-glass) powders were mixed with low-fusing-glass powders before being fired into test specimens. The mean flexural strength and fracture toughness (K1C) of 3 single-glass porcelains ranged from 57 to 63 MPa and from 0.68 to 0.73 MPa m(1/2), respectively, presenting no significant differences in one-way ANOVA. However, the flexural strength of 50% high-fusing-glass + 50% low-fusing-glass porcelain was 114 MPa (p < 0.05) and K1C was 1.2 MPa m(1/2) (p < 0.05). Microcracks were observed with a back-scattered scanning electron microscope and were associated with the high- (or medium-) fusing glass particles, suggesting residual stress in the low-fusing-glass matrix due to a coefficient of thermal expansion mismatch between the dispersed glass particles and the matrix glass. The dispersing glass particles appeared to act as a reinforcing agent for strengthening a glassy porcelain.

Aluminum Silicates↗
PubMed2006

Sodium-iodide symporter mediates iodide secretion in rat gastric mucosa in vitro.

In vivo studies on rats have demonstrated that considerable amounts of iodide are transported from the bloodstream into the gastric lumen. The mechanisms for and functional significance of this transport are poorly understood. Active (driven by Na(+)/K(+)-ATPase) iodide transport into thyroid follicular cells is mediated by the sodium-iodide symporter (NIS), which is also abundantly expressed in gastric mucosa. We aimed to further investigate the iodide transport in gastric mucosa and the possible role of NIS in this transport process. Iodide transport in rat gastric mucosa was studied in vitro in an Ussing chamber system using (125)I as a marker. The system allows measurements in both directions over a mucosal specimen. A considerable transport of iodide (from the serosal to the mucosal side) was established across the gastric mucosa, whereas in the opposite direction (mucosa to serosa), iodide transport was negligible. Sodium perchlorate (NaClO(4)), a competitive inhibitor of NIS, and ouabain, an inhibitor of the Na(+)/K(+)-ATPase, both attenuated gastric iodide transport from the serosal to the mucosal side. To investigate a possible neuroendocrine regulation of the iodide transport identified to occur from the serosal to the mucosal side of the stomach, thyroid-stimulating hormone (TSH), thyrotropin-releasing hormone (TRH), vasoactive intestinal peptide (VIP), histamine, or nitric oxide donor S-nitroso-N-acetyl-D,L-penicillamine (SNAP) was added. None of these substances influenced the iodide transport. We conclude that iodide is actively transported into the gastric lumen and that this transport is at least partly mediated by NIS. Additional investigations are needed to understand the regulation and significance of this transport.

Animals↗
PubMed1993

Effect of pH and sodium ions on intestinal uptake of lysine in rats.

Intestinal uptake of lysine in rats progressively decreased with an increase in pH from 5.2 to 8.5, both in the presence and absence of Na+ ions. At pH 5.2 lysine uptake was 30-35% more than that at neutral pH. Na+ activated lysine uptake by 40-50% at pH 5.2 and it was increased to 110-120% at neutral pH. The observed increase in lysine uptake in response to Na+ and H+ gradients was due to enhanced maximal velocity (Vmax), with little change in affinity constant (Kt). Arrhenius analysis revealed a biphasic curve for lysine uptake with transition temperature (Tc) around 20 degrees C (24 degrees C at pH 5.2 in presence of Na+). The energy of activation (Ea) below (16.1-23.4 Kcal/mole) and above (6.7-8.6 Kcal/mole) the Tc was similar at pH 5.2 and 7.0 both in the presence and absence of Na+ ions. The sensitivity of lysine uptake to various inhibitors was also dependent upon pH and Na+ ions.

Animals↗