Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “PRINTING”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22Linked to original sources
PubMed2006

Development of a dimethyl ether (DME) sensor using platinum nanoparticles and thick-film printing.

A portable and cost-effective technique to measure the dimethyl ether (DME) concentrations has been developed. It is based on an electrochemical principle measuring the oxidation current of DME at an applied potential of +0.2V versus a Ag/AgCl reference electrode. Thick-film printing technique is used for the fabrication of this DME sensor, and platinum nanoparticles in the crystallite size of 5.5 nm are used for the modification of the working electrode surface. This modification enhances the sensor performance significantly leading to a higher sensitivity of the sensor comparing to bare platinum electrode. Evaluation and characterization of this sensor are carried out over the DME concentration range of 0-7% (v/v), and a linear relationship between sensor outputs and the DME concentrations with an average R(2) of 0.996 exists. The reproducibility of the sensor is also very good. This electrochemically based DME sensor fabricated by thick-film screen printing technique and using the platinum nanoparticles to enhance its performance will be valuable and practical for the estimation of the airway mucosal blood flow.

Biosensing Techniques↗
PubMed2006

Design and development of a highly stable hydrogen peroxide biosensor on screen printed carbon electrode based on horseradish peroxidase bound with gold nanoparticles in the matrix of chitosan.

The design and development of a screen printed carbon electrode (SPCE) on a polyvinyl chloride substrate as a disposable sensor is described. Six configurations were designed on silk screen frames. The SPCEs were printed with four inks: silver ink as the conducting track, carbon ink as the working and counter electrodes, silver/silver chloride ink as the reference electrode and insulating ink as the insulator layer. Selection of the best configuration was done by comparing slopes from the calibration plots generated by the cyclic voltammograms at 10, 20 and 30 mM K(3)Fe(CN)(6) for each configuration. The electrodes with similar configurations gave similar slopes. The 5th configuration was the best electrode that gave the highest slope. Modifying the best SPCE configuration for use as a biosensor, horseradish peroxidase (HRP) was selected as a biomaterial bound with gold nanoparticles (AuNP) in the matrix of chitosan (HRP/AuNP/CHIT). Biosensors of HRP/SPCE, HRP/CHIT/SPCE and HRP/AuNP/CHIT/SPCE were used in the amperometric detection of H(2)O(2) in a solution of 0.1M citrate buffer, pH 6.5, by applying a potential of -0.4V at the working electrode. All the biosensors showed an immediate response to H(2)O(2). The effect of HRP/AuNP incorporated with CHIT (HRP/AuNP/CHIT/SPCE) yielded the highest performance. The amperometric response of HRP/AuNP/CHIT/SPCE retained over 95% of the initial current of the 1st day up to 30 days of storage at 4 degrees C. The biosensor showed a linear range of 0.01-11.3mM H(2)O(2), with a detection limit of 0.65 microM H(2)O(2) (S/N=3). The low detection limit, long storage life and wide linear range of this biosensor make it advantageous in many applications, including bioreactors and biosensors.

Biosensing Techniques↗
PubMed2006

Existing and emerging detection technologies for DNA (Deoxyribonucleic Acid) finger printing, sequencing, bio- and analytical chips: a multidisciplinary development unifying molecular biology, chemical and electronics engineering.

The current status and research trends of detection techniques for DNA-based analysis such as DNA finger printing, sequencing, biochips and allied fields are examined. An overview of main detectors is presented vis-à-vis these DNA operations. The biochip method is explained, the role of micro- and nanoelectronic technologies in biochip realization is highlighted, various optical and electrical detection principles employed in biochips are indicated, and the operational mechanisms of these detection devices are described. Although a diversity of biochips for diagnostic and therapeutic applications has been demonstrated in research laboratories worldwide, only some of these chips have entered the clinical market, and more chips are awaiting commercialization. The necessity of tagging is eliminated in refractive-index change based devices, but the basic flaw of indirect nature of most detection methodologies can only be overcome by generic and/or reagentless DNA sensors such as the conductance-based approach and the DNA-single electron transistor (DNA-SET) structure. Devices of the electrical detection-based category are expected to pave the pathway for the next-generation DNA chips. The review provides a comprehensive coverage of the detection technologies for DNA finger printing, sequencing and related techniques, encompassing a variety of methods from the primitive art to the state-of-the-art scenario as well as promising methods for the future.

Chemical Engineering↗
PubMed2005

Unraveling biochemical properties of cockroach (Periplaneta americana) proteinases with a gel X-ray film contact print method.

Eleven proteinase activity bands were detected in American cockroach (Periplaneta americana) gut. These were partially purified and characterized using a gel X-ray film contact print method. Cockroach gut proteinases (CGPs) show activity over a broad range of pH with maximum activity between pH 6 and 10, and optimal activity at 50-70 degrees C. CGPs were partially purified by preparative gel electrophoresis and analyzed using synthetic substrates and inhibitors. Four of the proteases exhibited chymotrypsin-like (C1 to C4) activity and seven trypsin-like (T1 to T7) activity. Accuracy of the gel X-ray film contact print method is confirmed by including bovine chymotrypsin in CGP analysis. Inhibition of CGPs with different plant proteinaceous proteinase inhibitors allowed identification of potential CGP inhibitors. Our results imply that presence of several CGP activity bands, and their stability and activity over a broad pH and temperature range might contribute to adaptation of P. americana to extreme environmental conditions and the polyphagous nature of the species.

Animals↗
PubMed2006

Direct-write fabrication of colloidal photonic crystal microarrays by ink-jet printing.

An array of the colloidal photonic crystals was directly fabricated using an ink-jet printing. The colloidal ink droplets containing the monodispersed polystyrene latex particles were selectively deposited on a hydrophobic surface. Solvent evaporation from each ink droplet leads to a formation of microdome-shaped colloidal assembles of close-packed structures. Microspectroscopic analysis has confirmed that the individual assembly serves as a photonic crystal and its optical properties can be correlated with the microstructural features. Unlike other techniques of patterned growth of colloidal photonic crystal, the substrate does not need to be patterned first and no template is needed in the direct writing by the ink-jet printing. Using our strategy, we have rapidly produced the colloidal photonic crystal microarrays composed of different-sized spheres addressably patterned on the same substrate.

Journal Article↗
PubMed2006

Alternative models for determining the surface energy components in offset printing.

Different ways of calculating surface energy components for substrates used in offset printing are compared. The results of the very useful van Oss-Chaudhury-Good bi-bidentate model (vOCG) are simplified to mono-bidentate and mono-monodentate models. The unbalance in the acid-base values often obtained by the vOCG model is strongly reduced when applying the simple mono-monodentate model. Moreover, the frequently encountered problem of negative square roots of the acid and base components is removed. An attempt to describe the ink transfer during offset printing by calculating theoretical works of adhesion between ink/plate and ink/paper is also made. The effect of paper roughness on the wetting was studied with atomic force microscopy (AFM).

Journal Article↗
PubMed2003

Rapid detection of cucumber vein yellowing virus by tissue-print hybridisation with digoxigenin-labelled cDNA probes.

Hybridisation of tissue prints with nonradioactive cDNA probes was developed to detect cucumber vein yellowing virus (CVYV) in cucurbit plants. Results showed irregular distribution of the virus within cucumber, zucchini or melon plants without defined tropism for a specific tissue. Therefore, reliable diagnosis of CVYV requires analysis of tissue prints from at least five different plant sites. This detection procedure allows rapid analysis of large numbers of plants and it can be useful for epidemiological studies of CVYV and to control virus spread via eradication of early foci.

Cucumis sativus↗
PubMed2005

Imaging phonology without print: assessing the neural correlates of phonemic awareness using fMRI.

Acquisition of phonological processing skills, such as the ability to segment words into corresponding speech sounds, is critical to the development of efficient reading. Prior neuroimaging studies of phonological processing have often relied on auditory stimuli or print-mediated tasks that may be problematic for various theoretical and empirical reasons. For the current study, we developed a task to evaluate phonological processing that used visual stimuli but did not require interpretation of orthographic forms. This task requires the subject to retrieve the names of objects and to compare their first sounds; then, the subject must indicate if the initial sounds of the names of the pictures are the same. The phonological analysis task was compared to both a baseline matching task and a more complex control condition in which the participants evaluated two different pictures and indicated whether they represented the same object. The complex picture-matching condition controls for the visual complexity of the stimuli but does not require phonological analysis of the names of the objects. While both frontal and ventral posterior areas were activated in response to phonological analysis of the names of pictures, only inferior and superior frontal gyrus exhibited differential sensitivity to the phonological comparison task as compared to the complex picture-matching control task. These findings suggest that phonological processing that is not mediated by print relies primarily on frontal language processing areas among skilled readers.

Acoustic Stimulation↗
PubMed2006

The effect of telephone versus print tailoring for mammography adherence.

OBJECTIVE: The purpose of this intervention was to increase mammography adherence in women who had not had a mammogram in the last 15 months. METHODS: A prospective randomized intervention trial used four groups: (1) usual care, (2) tailored telephone counseling, (3) tailored print, (4) tailored telephone counseling and print. Participants included a total of 1244 women from two sites-a general medicine clinic setting serving predominately low-income clientele and a Health Maintenance Organization (HMO). Computer-tailored interventions addressed each woman's perceived risk of breast cancer, benefits and/or barriers and self-efficacy related to mammography screening comparing delivery by telephone and mail. RESULTS: Compared to usual care all intervention groups increased mammography adherence significantly (odds ratio 1.60-1.91) when the entire sample was included. CONCLUSIONS: All interventions groups demonstrated efficacy in increasing mammography adherence as compared to a usual care group. When the intervention analysis considered baseline stage, pre contemplators (women who did not intend to get a mammogram) did not significantly increase in mammography adherence as compared to usual care. PRACTICE IMPLICATIONS: Women who are in pre contemplation stage may need a more intensive intervention.

Computer-Assisted Instruction↗
PubMed2006

Gifts, bribes and solicitions: print media and the social construction of informal payments to doctors in Taiwan.

The Taiwanese practice of patients giving informal payments to physicians to secure services is deeply rooted in social and cultural factors. This study examines the portrayal of informal payments by Taiwanese print news media over a period of 12 years-from prior to until after the implementation of national health insurance (NHI) in Taiwan in 1995. The goal of the study was to examine how the advent of NHI changed the rationale for and use of informal payments. Both before and after the introduction of NHI, Taiwanese newspapers portrayed informal payments as appropriate means to secure access to better health care. Newspaper accounts established that, although NHI reduced patients' financial barriers to care, it did not change deeply held cultural beliefs that good care depended on the development of a reciprocal sense of obligation between patients and physicians. Physicians may have also encouraged the ongoing use of informal payments to make up revenue lost when NHI standardized fees and limited income from dispensing medications. In 2002, seven years after the implementation of NHI, the use of informal payments, though illegal, was still being justified in the print media through allusions to its role in traditional Taiwanese culture.

Financing, Personal↗
PubMed2002

Relating print and speech: the effects of letter names and word position on reading and spelling performance.

From an early age, children can go beyond rote memorization to form links between print and speech that are based on letter names in the initial positions of words (Treiman & Rodriguez, 1999; Treiman, Sotak, & Bowman, 2001). For example, children's knowledge of the name of the letter t helps them learn that the novel word TM is pronounced as team. Four experiments were carried out to determine whether letter names at the ends of words are equally useful. Four- and five-year-olds derived little benefit from such information in reading (Experiments 1 and 3) or spelling (Experiment 2), although adults did (Experiment 4). For young children, word-final information appears to have less influence on reading and spelling performance than does word-initial information. The results help delineate the circumstances under which children can go beyond a logographic approach in learning about print.

Child, Preschool↗
PubMed2000

A multi-antigen print immunoassay for the development of serological diagnosis of infectious diseases.

Serological diagnosis of infectious diseases that generate a highly heterogeneous antibody repertoire, such as tuberculosis, requires tests based on cocktails of antigens. We describe a new method called multi-antigen print immunoassay (MAPIA) for cocktail-based serological diagnosis. The assay entails the application of antigen to nitrocellulose membranes by micro-aerosolization (printing), followed by antibody detection using standard chromogenic immunodevelopment. Cocktails of protein antigens of Mycobacterium tuberculosis tested by MAPIA were found to maintain the serological activity of each of their components. In contrast, the same cocktails tested by enzyme-linked immunosorbent assay (ELISA) had a serological activity that was lower than the sum of the activities of their components. Consequently, cocktail-based MAPIA attained the diagnostic sensitivity expected on the basis of single antigen results, while a significant loss of diagnostic sensitivity was observed with cocktail-based ELISA. Thus, the MAPIA format is superior to conventional ELISA for the serological diagnosis of infectious diseases characterized by heterogeneous antibody responses.

Antibodies, Bacterial↗
PubMed1998

An investigation of LET 'finger-prints' in Tradescantia.

Chromosome-type aberration scores, obtained in the Tradescantia microspore system following exposure to radiation, have been extracted from all significant papers since 1940, and augmented with unpublished results from this laboratory. The data include aberrations produced by X-, gamma-rays and neutrons, and cover an enormous range of qualities, doses, dose-rates and ambient gas conditions. Two proposed LET 'finger-print' ratios were examined: Dicentrics/Centric-rings (D/R or F-ratio) and Total deletions/Dicentrics+Centric-rings. There was no significant effect of LET on either of these. Further, D/R was independent of dose, whereas Deletions/D+R showed, as expected, a positive dose effect. In a very small subset of experiments, sizes of interstitial deletions had been recorded, and a significant reduction in modal size was observed for neutrons compared to X-rays. Even if this observation is confirmed by future work, it will not provide a usable 'finger-print' for long-term studies since, being acentric, deletions are rapidly eliminated from a dividing cell population.

Chromosome Aberrations↗
PubMed2000

DNA-printing: utilization of a standard inkjet printer for the transfer of nucleic acids to solid supports.

The use of total cDNA as a probe for hybridization enables the transcription level of a large number of genes to be analyzed at the same time. Some effort has been spent to develop high density gene arrays on different solid supports to facilitate this hybridization. We achieved a high resolution by utilizing inkjet printer technology as a useful alternative to blotting the target genes onto a membrane. By the use of an ordinary inkjet printer model we show that it is possible to print DNA onto hybridization membranes and hybridize using either specific genes or total cDNA as probes. The high resolution of these prints (300 dpi) might be used in the future to construct complex micro-arrays to analyze simultaneously large numbers of genes.

Animals↗
PubMed2000

Multimechanism oral dosage forms fabricated by three dimensional printing.

Four types of complex oral drug delivery devices have been fabricated using the three dimensional printing process. Immediate-extended release tablets were fabricated which were composed of two drug-containing sections of different pH-based release mechanisms. Pulsed release of chlorpheniramine maleate occurred after a lag time of 10 min followed by extended release of the compound over a period of 7 h. Breakaway tablets were fabricated composed of three sections. An interior fast-eroding section separating two drug-releasing sub-units eroded in 30-45 min in simulated gastric fluid. Enteric dual pulsatory tablets were constructed of one continuous enteric excipient phase into which diclofenac sodium was printed into two separated areas. These samples showed two pulses of release during in vitro USP dissolution at 1 and 8 h with a lag time between pulses of about 4 h. Dual pulsatory tablets were also fabricated. These samples were composed of two erosion based excipient sections of opposite pH based solubility. One section eroded immediately during the acid dissolution stage releasing diclofenac during the first 30 min, and the second section began eroding 5 h later during the high pH stage.

Delayed-Action Preparations↗
PubMed2000

Oral dosage forms fabricated by three dimensional printing.

Three Dimensional Printing is a novel technique used in the fabrication of complex oral dosage delivery pharmaceuticals. It is possible to engineer devices with complicated internal geometries, varying densities and diffusivities, and multiple actives and excipients. Samples were fabricated using this technique using standard pharmaceutical materials. Erosion mechanism delayed-release tablets were constructed with varying polymer content from 8.9 to 17. 9%. Lag times varied between 25 and 50 min with a corresponding decrease in release rate as polymer content increased. Diffusion mechanism tablets were constructed with varying polymer content from 9.0 to 16.7%. The peak release rate decreased and the time to exhaustion increased with polymer content, whereas lag time was not affected. Active delivery studies with fluorescein indicated that Three Dimensional Printing is capable of accurately constructing dosage forms with active content as low as 10(-12) moles per tablet. Hardness and friability testing indicated that samples fabricated with this technique are comparable to other standard pharmaceutical products.

Algorithms↗
PubMed2001

Tissue printing for myrosinase activity in roots of turnip and Japanese radish and horseradish: a technique for localizing myrosinases.

A method for analyzing the tissue distribution of myrosinase activity in Brassicaceous plants was developed. This technique is based on 'tissue printing' to visualize enzyme activity. The freshly-cut surface (transverse direction) of the root of three species, Japanese radish (Raphanus sativus), turnip (Brassica campestris) and Japanese horseradish (wasabi, Wasabia japonica), was pressed onto a polyvinylidene difluoride (PVDF) filter to immobilize the proteins onto the membrane. The sites of myrosinase activity on the membranes were visualized by the sinigrin-glucose oxidase-peroxidase system. Signals for myrosinase activity were observed in both the epidermis and vascular cambium of the root of the Japanese radish, turnip and wasabi. Measurement of myrosinase activity in protein extracts indicated that the level of myrosinase activity in the peeling, which consisted of the epidermis, cortex and vascular cambium, was much higher than that in the peeled root of the three species. These results support the image that myrosinase activity, obtained in tissue printing, corresponded well with the tissue distribution of myrosinase activity.

Journal Article↗
PubMed2001

Biofantasies: genetics and medicine in the print news media.

The contemporary news media is an important site for exploring the diverse and complex cultural images of genetics and its medical possibilities, and of the mechanisms by which these images are (re) produced and sustained. This article investigates how the print news media 'frames' stories on genetics and medicine. It is based on a discourse analysis of articles appearing in three Australian newspapers in the late 1990s. Gene stories were found to be prominent in each of the newspapers, and to emphasise the medical benefits of genetic research. Stories frequently cite and quote scientists, who explain the nature and significance of the research and/or its implications for treatment or prevention. Many stories focus on new genetic discoveries, and portray genetic researchers as involved in a quest to unlock nature's secrets. Stories of hope, and depictions of geneticists as warriors or heroes, appear regularly. The positive vision of genetics is supported by the use of particular metaphors, accompanying illustrative material, 'human interest' stories, and reference to credible sources. There is rarely mention of the influence of non-genetic factors and 'multifactorial' interactions on disorders, or questioning of the goals, direction, methods, or value of genetic research. Scientists made extensive use of the media in their efforts to maintain a positive image of research in the face of public concerns about scientists 'going too far', following the announcement of the cloning of Dolly. Boundaries were drawn between 'therapeutic cloning'--implicitly defined as 'good', useful, and legitimate--and 'reproductive cloning'--seen as 'bad', dangerous, and illegitimate. By framing news stories as they do, the print news media are likely to exert a powerful influence on public responses to health problems. With new genetic technologies becoming more integrated in preventive medicine and public health, it is important to investigate how news stories help shape the agenda for public debate.

Animals↗