Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “SILICA”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21Linked to original sources
PubMed2006

New approach to the immobilization of glucose oxidase on non-porous silica microspheres functionalized by (3-aminopropyl)trimethoxysilane (APTMS).

The immobilization and encapsulation of glucose oxidase (GOD) onto the mesoporous and the non-porous silica spheres prepared by co-condensation of tetraethylorthosilicate (TEOS) and (3-aminopropyl)trimethoxysilane (APTMS) in the water-in-oil (W/O) emulsion system were studied. The terminal amine group was used as the important functionality for GOD immobilization on the silica substrate. When only TEOS is used as a silica source, the disordered mesoporous silica microspheres are obtained. As the molar ratio of APTMS to TEOS (R(AT)) increases, the surface area and pore volume of the silica particles measured by nitrogen adsorption and desorption method and SEM decrease rapidly. Particularly, the largest change of the surface morphology is observed between R(AT)=0.20 and R(AT)=0.25. The amount and the adsorption time of immobilized enzyme were measured by UV spectroscopy. About 20wt% of GOD was immobilized into the silica substrates above R(AT)=0.60 and was completely adsorbed into the substrate of R(AT)=0.80 with lapse of 4h after addition. In the measurement of the thermal stability, GOD dissolved in buffer solution loses nearly all of its activity after 30 min at 65 degrees C. In contrast, GOD immobilized on the surface-modified silica particles still retains about 90% of its activity after the same treatment. At this temperature, the immobilized glucose oxidase retained half of its initial activity after 4h. It is shown that the suitable usage of functionalizing agent like APTMS as well as the control of surface morphology is very important on the immobilization of enzyme.

Enzymes, Immobilized↗
PubMed2005

Solid dispersion particles of amorphous indomethacin with fine porous silica particles by using spray-drying method.

The solid dispersion particles of indomethacin (IMC) were prepared with different types of silica, non-porous (Aerosil 200) or porous silica (Sylysia 350) by using spray-drying method. Powder X-ray diffraction analysis showed that IMC in solid dispersion particles is in amorphous state irrespective of the type of silica formulated. In DSC analysis, the melting peak of IMC in solid dispersion particles with Sylysia 350 shifted to lower temperature than that in solid dispersion particles with Aerosil 200 although the peak of each solid dispersion particles was much smaller than that of original IMC crystals. Dissolution property of IMC was remarkably improved by formulating the silica particles to the solid dispersion particles. In comparing the effect of the type of the silica particles, the dissolution rate of solid dispersion particles with Sylysia 350 was faster than that with Aerosil 200. The formulation amount of IMC did not affect on the amorphous state of IMC in the resultant solid dispersion particles in powder X-ray diffraction patterns. However, the area of the melting peak of IMC in the solid dispersion particles increased and an exothermic peak owing to recrystallization was observed with increasing the IMC content in the DSC patterns. The dissolution rate of IMC from the solid dispersion particles with Sylysia 350 was faster than that of Aerosil 200 irrespective of IMC content. In stability test, amorphous IMC in the solid dispersion particles with each silica particles did not crystallize under storing at severe storage conditions (40 degrees C, 75% RH) for 2 months, while amorphous IMC without silica easily crystallized under same conditions.

Indomethacin↗
PubMed2003

Bioanalytical liquid chromatography tandem mass spectrometry methods on underivatized silica columns with aqueous/organic mobile phases.

This review article summarizes the recent progress on bioanalytical LC-MS/MS methods using underivatized silica columns and aqueous/organic mobile phases. Various types of polar analytes were extracted by using protein precipitation (PP), liquid/liquid extraction (LLE) or solid-phase extraction (SPE) and were then analyzed using LC-MS/MS on the silica columns. Use of silica columns and aqueous/organic mobile phases could significantly enhance LC-MS/MS method sensitivity, due to the high organic content in the mobile phase. Thanks to the very low backpressure generated from the silica column with low aqueous/high organic mobile phases, LC-MS/MS methods at high flow rates are feasible, resulting in significant timesaving. Because organic solvents have weaker eluting strength than water, direct injection of the organic solvent extracts from the reversed-phase solid-phase extraction onto the silica column was possible. Gradient elution on the silica columns using aqueous/organic mobile phases was also demonstrated. Contrary to what is commonly perceived, the silica column demonstrated superior column stability. This technology can be a valuable supplement to the reversed-phase LC-MS/MS.

Chromatography, Liquid↗
PubMed2003

Fractal behavior and scaling law of hydrophobic silica in polyol.

This article examines the rheological properties of a system composed of polyol and colloidal silica. Three types of nanosized silicas with hydrophilic and hydrophobic surfaces were studied: A200 with OH surface groups, R974 with CH(3) surface groups, and R805, which is grafted with a C(8)H(17) alkyl chain. Rheometric measurements showed that the dispersions of R805 silicas have a yield stress at low volume fraction, unlike the R974 and A200 silicas. The plastic behavior of the hydrophobic silicas was quantified by a yield stress sigma(0) and an elastic modulus G'. It is observed that these parameters follow scaling laws as a function of the volume fraction of silica introduced, in the form sigma(0) approximately phi(v)(2.9+/-0.2), G' approximately phi(v)(4.1+/-0.3). Static light scattering (SLS) and small angle neutron scattering (SANS) measurements show a fractal arrangement with a fractal dimension D=1.8 ranging from elementary particles of about 32 nm to aggregates measuring about 6 mum. Correlations were established between the theoretical scaling laws and the experimental scaling laws determined by rheometric measurements. The fractal structure observed in this system is explained by the attractive physical interaction of the octyl chains between the silica particles. Contrary to what has been observed in the past by Khan and Zoeller (J. Rheol. 37 (1993) 1225), the lower molecular weight of the polyol studied here, which has a shorter chain length, allows direct bridging of two separate silicates though alkyl chains, giving rise to the formation of a 3D gel network at volume fractions as low as phi(v)=2.2%.

Journal Article↗
PubMed2005

Supramolecular structures on silica surfaces and their adsorptive properties.

The study of adsorptive and chemical immobilization of beta-cyclodextrin on a surface of hydroxylated silicas with various porous structure is described. Using IR spectroscopy, thermal gravimetrical analysis with a programmed heating, and chemical analysis of the silica surface, it is shown that the process of adsorption-desorption of beta-cyclodextrin depends on the porous structure of the silica. The reaction of esterification was used for chemical grafting of beta-cyclodextrin on the surface of hydroxylated silicas. Hydrolytic stability of silicas chemically modified by beta-cyclodextrin apparently is explained by simultaneous formation of chemical and hydrogen bonds between surface silanol groups and hydroxyl groups of beta-cyclodextrin. The uptake of the cations Cu(II), Cd(II), and Pb(II) and the anions Cr(VI) and As(V) by silicas modified with beta-cyclodextrin is investigated as a function of equilibrium ion concentrations. The increase of ion uptake and selectivity of ion extraction in comparison with starting silicas is established. It is due to the formation of surface inclusion complexes of the "host-guest" type in which one molecule of beta-cyclodextrin interacts simultaneously with several ions.

Journal Article↗
PubMed2005

Synthesis of monodisperse fluorescent core-shell silica particles using a modified Stober method for imaging individual particles in dense colloidal suspensions.

Core-shell silica particles, with a diameter of 1.5 mum, containing a dye fluorescein isothiocyanate (FITC), are synthesized by the hydrolysis and condensation of tetraethylorthosilicate (TEOS). Sodium dodecyl sulfate (SDS) is added to synthesize fluorescent core particles with the diameter of approximately 1 mum. In the addition of SDS, the surface charge reduced by counterions (Na+) of the surfactant leads to a higher degree of aggregation of the primary particles and the formation of larger secondary particles. The particle growth kinetics confirms the aggregation growth model for the synthesis of monodisperse silica particles, and also shows the dependence of final particle size on colloidal stability resulting from the addition of SDS. Light and X-ray scattering data reveal that the final particles have compactly packed structures with smooth surfaces. The seeded growth technique is then used to form a silica shell layer on the fluorescent core. The added amount of water and NH4OH has significant effects on shell formation. Finally, the final core-shell silica particles are modified by chemisorption of octadecanol at the surface to be dispersed in organic solvents. Octadecyl-coated silica particles are sterically stabilized in silica index-matching solvents such as chloroform and hexadecane to directly image separate particles using confocal microscopy. In chloroform, the organophilic silica particles disperse well, whereas in hexadecane they form a volume-filling gel structure at room temperature.

Journal Article↗
PubMed2005

Hydrothermal synthesis, characterization, and photocatalytic performance of silica-modified titanium dioxide nanoparticles.

Silica-modified titanium dioxides were prepared by a hydrothermal method and then characterized by XRD, FT-IR, XPS, TEM, and UV-visible spectroscopy. The silica-modified titanium dioxides were in anatase phase and had large surface areas. There was strong interaction between SiO2 and TiO2, and TiOSi bonds formed during the hydrothermal process. The addition of silica in TiO2 particles could effectively suppress the formation of the rutile phase and the growth of titanium dioxide crystals. DRS spectra proved an increase in the band-gap transition with the increase of silica. The silica-modified TiO2 nanoparticles exhibited better photocatalytic activity, which increased with the silica amount, in comparison with pure TiO2 nanoparticles. Due to better thermal stability, the photocatalytic activity of the silica-modified TiO2 sample held good photocatalytic activity even after calcined at 1273 K.

Journal Article↗
PubMed2005

Nano-fibriform production of silica from natural chrysotile.

Nano-fibriform silica was extracted from chrysotile by the acid-leaching method. The acid-leached residue of chrysotile has been studied by TEM, XRD, FT-IR, and thermal analysis techniques, etc. When the magnesium leaching degree (MLD) is over 90%, the nano-fibriform silica consists of hydrous silicon dioxide (above 90%) with small amount of magnesium trapped inside the SiO network. The amount of hydroxyl on surface of nano-fibriform silica is 6 unit nm(-2). This value is between the values of fumed and precipitated silica. This study shows that nano-fibriform silica is a kind of amorphous matter with a high special surface area (368 m2/g), a high adsorption (330 cm3/g), and a larger pore volume (0.51 cm3/g). The diameter of a single silica fiber is 20-30 nm. The nitrogen adsorption isotherm is similar to Type IV curve. The nano-fibriform silica is one of mesopores materials.

Journal Article↗
PubMed2006

Characterization of silica-coated tobacco mosaic virus.

The deposition of silica on the surface of tobacco mosaic virus (TMV) is achieved at a higher pH (>7) as a means to enhance its usefulness as a template for the synthesis of nanostructures. Electron energy loss spectroscopy definitively shows the presence of a silica shell on the surface of the TMV while small angle X-ray scattering differentiates successfully between silica-coated TMV and silica particles in the presence of uncoated TMV. Importantly, coating reactions done in a 50% w/v methanol/water solution produce smaller silica nanostructures during the condensation of the hydrolysis intermediates, possibly aiding in obtaining uniform coating. Furthermore, TMV-templated silica coatings are found to enhance the stability of the virus particle in methanol at conditions that would ordinarily disrupt the assembled particle. Combined these findings demonstrate that TMV can function as an efficient template for the controlled deposition of silica at neutral pH.

Journal Article↗
PubMed2004

Cesium migration in saturated silica sand and Hanford sediments as impacted by ionic strength.

Large amounts of 137Cs have been accidentally released to the subsurface from the Hanford nuclear site in the state of Washington, USA. The cesium-containing liquids varied in ionic strengths, and often had high electrolyte contents, mainly in the form of NaNO3 and NaOH, reaching concentrations up to several moles per liter. In this study, we investigated the effect of ionic strengths on Cs migration through two types of porous media: silica sand and Hanford sediments. Cesium sorption and transport was studied in 1, 10, 100, and 1000 mM NaCl electrolyte solutions at pH 10. Sorption isotherms were constructed from batch equilibrium experiments and the batch-derived sorption parameters were compared with column breakthrough curves. Column transport experiments were analyzed with a two-site equilibrium-nonequilibrium model. Cesium sorption to the silica sand in batch experiments showed a linear sorption isotherm for all ionic strengths, which matched well with the results from the column experiments at 100 and 1000 mM ionic strength; however, the column experiments at 1 and 10 mM ionic strength indicated a nonlinear sorption behavior of Cs to the silica sand. Transport through silica sand occurred under one-site sorption and equilibrium conditions. Cesium sorption to Hanford sediments in both batch and column experiments was best described with a nonlinear Freundlich isotherm. The column experiments indicated that Cs transport in Hanford sediments occurred under two-site equilibrium and nonequilibrium sorption. The effect of ionic strength on Cs transport was much more pronounced in Hanford sediments than in silica sands. Effective retardation factors of Cs during transport through Hanford sediments were reduced by a factor of 10 when the ionic strength increased from 100 to 1000 mM; for silica sand, the effective retardation was reduced by a factor of 10 when ionic strength increased from 1 to 1000 mM. A two order of magnitude change in ionic strength was needed in the silica sand to observe the same change in Cs retardation as in Hanford sediments.

Adsorption↗
PubMed2004

Silica-exposed mice generate autoantibodies to apoptotic cells.

Silica exposure has been associated with development of autoantibodies and systemic autoimmune disease, but mechanisms leading to these events are unknown. This study tested the hypothesis that autoantibodies associated with silica exposure may recognize epitopes on apoptotic macrophages. Serum was obtained from New Zealand mixed (NZM) mice, in which instillation of silica significantly increased production of autoantibodies. Sera were selected that were shown, by indirect immunofluorescence (IIF), to be positive or negative for antinuclear antibodies (ANA) following silica or saline exposure, respectively. Apoptosis was induced in MH-S murine macrophages using silica or cycloheximide. The ability of the autoantibodies to preferentially recognize apoptotic cells was tested using IIF and ELISA. Apoptotic cells, but not live cells, were shown to stain with serum from ANA-positive mice, but not from ANA-negative serum. In addition, binding of antibodies from ANA-positive mice was shown to be significantly greater on cellular lysates from apoptotic cells, but not necrotic or live cell lysates using an ELISA based assay. Finally, inhibition of apoptosis with a broad spectrum caspase inhibitor, Boc-D-FMK, blocked the increased binding by the autoantibodies. These results suggest that autoantibodies from mice with silica-exacerbated autoimmune responses recognize specific epitopes on apoptotic macrophages. It is therefore possible that silica-induced apoptosis may exacerbate autoimmune responses by exposing antigenic epitopes to the immune system.

Administration, Intranasal↗
PubMed2005

Iron-dependent lysosomal destabilization initiates silica-induced apoptosis in murine macrophages.

Alveolar macrophages play a critical role in silica-induced lung fibrosis, and apoptotic mechanisms have been implicated in silica-induced pathogenesis. Here, employing a model of murine macrophages (J774 cells), it is shown that serum-coated alpha-quartz silica particles cause lysosomal rupture and apoptosis following endocytotic uptake. The loss of lysosomal integrity involves intralysosomal iron-catalyzed peroxidative damage to lysosomal membranes. Thus, lysosomal damage is most pronounced in cells exposed to silica particles with high amounts of surface-bound iron, whereas silica particles previously treated with the iron chelator desferrioxamine only induce modest rupture. Furthermore, inhibition of intralysosomal Fenton type chemistry, either by pre-treatment with desferrioxamine complexed to starch--an iron chelator targeted to the lysosomal compartment--or by concomitant treatment with diphenylene iodonium--a potent inhibitor of NADPH oxidase --both prevent silica-induced lysosomal leakage and ensuing apoptotic cell death. This study also demonstrates that silica-induced lysosomal rupture is a very early apoptotic event, preceding activation of caspases, disruption of transmembrane mitochondrial potential and DNA fragmentation. Indeed, these later apoptotic events appear to be directly correlated to the magnitude of lysosomal leakage, and are not observed in cells treated with high molecular weight desferrioxamine or diphenylene iodonium.

Animals↗
PubMed2000

Towards the ultimate minimum particle diameter of silica packings in capillary electrochromatography.

Porous silica beads with an average particle diameter between 0.2 and 3 microm have been applied as packing material in capillary electrochromatography (CEC). The experiments were directed to investigate whether it is really feasible and as promising as expected to use such small particles. In CEC, plate heights of H approximately/= 1-2 d(p) can be achieved which is smaller than the plate heights usually attained in high-performance liquid chromatography. Using a capillary packed with 0.5 microm silica beads we achieved a plate height of H = 3 d(p) indicating the presence of dispersive effects like Joule heating. Calculations demonstrate that at a field strength of about 800 V cm(-1) one third of the plate height can be lost by Joule heating effects if the heat is not removed by a cooling system. Additionally, the H(u) curve is still descending at the maximum electroosmotic flow (EOF) velocity we generated with the modified capillary electrophoresis instrument. To fully exploit the potential of submicron size silicas higher field strengths, i.e., higher EOF velocities, must be attained. To study the influence of the kind of packing on the EOF porous as well as nonporous silicas have been applied. The experiments clearly indicate that the EOF of porous and nonporous silicas is the same. Since the EOF is more or less exclusively generated by the packing material the zeta potential of n-octyl bonded 0.5 microm silica has been determined. The dependence of the zeta potential on the pH is identical to the dependence of the EOF on the pH in a packed capillary. The point of zero charge of the silica is at pH 2-3.

Electrophoresis, Capillary↗
PubMed2000

Synthesis of spherical porous silicas in the micron and submicron size range: challenges and opportunities for miniaturized high-resolution chromatographic and electrokinetic separations.

Classical silica technology has reached its limit with respect to an ultimate minimum particle size of about 2 microm in diameter. Here, a novel process is presented which allows one to synthesize porous silica beads and control their particle diameter in situ, within the range of 0.2-2.0 microm. As a result, no sizing is required and losses of silica are avoided. Furthermore, the process enables one to control in situ the pore structural parameters and the surface chemistry of the silica beads. Even though surface funtionalized silicas made according to this process can principally be applied in fast HPLC the column pressure drop will be high even for short columns. In addition, the column efficiency, expressed in terms of the theoretical plate height is about H-2d(p) in the best case and limited by the A and C term of the Van Deemter equation. In other words the gain in total plate number when using 1-2 microm silica beads in short columns is minimal as compared to longer columns packed with 5 microm particles. Capillary electrochromatography (CEC) as a hybrid method enables the application of micron size as well as submicron size particles. This consequently enhances column efficiency by a factor of 5-10 when compared to HPLC. The use of short CEC columns packed with submicron size silicas provides the basis for fast and efficient miniaturized systems. The most significant feature of CEC as compared to HPLC is that the former allows one to resolve polar and ionic analytes in a single run. An alternative method for miniaturization is capillary electrophoresis (CE) which generates extremely high efficiencies combined with fast analysis. Its application, however, is limited to ionic substances.

Chromatography, Liquid↗
PubMed2000

Phenylaminopropyl silica--a new specific stationary phase for high-performance liquid chromatography of phenols.

The chromatographic properties of a new stationary phase, phenylaminopropyl silica (PhA-silica), containing phenylaminopropyl residues covalently bonded to the silica surface were studied. The presence of secondary amino groups, phenyl rings and alkyl linkers in the attached molecule makes it especially suitable for the separation of phenols by mixed mode retention mechanism including a combination of hydrogen-bonding, hydrophobic, electrostatic and pi-pi interactions with the stationary phase. The effects of mobile phase pH, ionic strength, nature and concentration of organic modifier on the retention of phenols on PhA-silica were investigated under conditions of reversed-phase HPLC. To elucidate the role of the amino group in the attached molecule in retention of phenols the selectivity of PhA-silica was compared with that obtained for phenylpropyl silica in the framework of a linear solvation energy relationship (LSER) model. The isocratic separation of phenol, and its nine methyl-, chloro- and nitro-substituted derivatives was achieved on a 150x4.6 mm I.D. chromatographic column packed with 7 microm particles of PhA-silica.

Chromatography, High Pressure Liquid↗
PubMed2001

Simultaneous separation of common mono- and divalent cations on a zirconium-modified silica gel column by ion chromatography with non-suppressed conductimetric detection and tartaric acid-15-crown-5 as eluent.

The application of laboratory-made zirconium-modified silica gels (Zr-silicas) as cation-exchange stationary phases to ion chromatography with conductimetric detection (IC-CD) for common mono- and divalent cations (Li+, Na+, NH4+, K+, Mg2+ and Ca2+) was carried out. Zr-silicas were prepared by the reaction of the silanol group on the surface of silica gel with zirconium tetrabutoxide (Zr(OCH2CH2CH2CH3)4) in ethanol. Zr-silica adsorbed on 10 mg zirconium g(-1) silica gel was a suitable cation-exchange stationary phase in IC-CD for the separation of these mono- and divalent cations. Excellent simultaneous separation and highly sensitive detection for these cations were achieved in 10 min by IC-CD using a Zr-silica column (150x4.6 mm I.D.) and 10 mM tartaric acid containing 10 mM 15-crown-5 (1,4,7,10,13-pentaoxacyclopentadecane) as the eluent. The proposed IC-CD method was successfully applied to the determination of major mono- and divalent cations in natural water samples.

Cations, Divalent↗
PubMed1997

Stability of silica-based, endcapped columns with pH 7 and 11 mobile phases for reversed-phase high-performance liquid chromatography.

The goal of this study was to define practical conditions and limitations of using silica-based, endcapped bonded-phase columns in intermediate and higher pH environments for developing rugged HPLC methods. Bonded-phase degradation in this pH range is a result mainly of silica support dissolution; covalently-bound silane ligands are hydrolyzed very slowly if at all from silica supports at intermediate and higher pH. Based on rates of silica support dissolution determined by chemical measurements and comparable chromatographic studies, we now find that endcapping alkyl-bonded stationary phases increases column longevity at pH 7, compared to non-endcapped columns. As previously determined for non-endcapped packings, we also find that the type of silica support determines the stability of bonded-phase packings. Silicas made by the sol-gel process are more resistant to dissolution than supports made by a silicate-gel (xerogel) process. In addition, endcapping methods apparently affect column stability, with double-endcapping methods apparently superior to single-endcapping approaches. Degradation rates for several endcapped commercial bonded-phase C8 columns were found to be quite variable in highly aggressive pH 7 accelerated-lifetime tests. Column stability in the pH 7-11 range is enhanced by using buffers other than phosphate in the mobile phase, and by excluding higher column temperatures. Certain silica-based endcapped bonded-phase columns can be used for developing rugged methods to at least pH 11 when used with organic buffers at < or = 40 degrees C.

Buffers↗
PubMed2003

Organo-modified cationic silica nanoparticles/anionic polymer as flocculants.

The synthesis of quaternized silica nanoparticles and its application to fine clay flocculation were investigated. N-trimethoxysilylpropyl-N,N,N-trimethylammonium chloride was used as a cationic reagent to introduce quaternary amine groups onto the surfaces of silica nanoparticles via the formation of covalent bonds between the methoxy groups of the cationic reagents and the silanol groups in the silica surface. The zeta potential, zeta, and charge density of the silica particles modified under various reaction conditions were determined. Dynamic clay flocculation experiments using a photometric dispersion analyzer (PDA) showed that the cationic silica alone contributed little to the flocculation. However, the cationic silica, in conjunction with an anionic polymer of high M(w) and low charge density, led to a significant improvement in the flocculation of fine clay particles. The mechanism of flocculation was explored by a systematic investigation of interaction between cationic silica and anionic polymers as well as of their adsorption behavior on clay surfaces. The influence of factors such as pH and electrolyte concentration on clay flocculation was also investigated.

Journal Article↗