Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Polyelectrolytes”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21Linked to original sources
PubMed2005

Channel flow configuration for studying the kinetics of surfactant-polyelectrolyte binding.

A novel channel flow configuration was developed and utilized for studying the poly(styrenesulfonate)-cetylpyridinium ion interaction kinetics. The surfactant solution was continuously injected into a flow of polyelectrolyte solution, and the extent of the association reaction was probed at an ion-selective detector electrode. The system was modeled within an analytical approximation, which was tested by a finite-element simulation of the full convective mass transport problem including the homogeneous complexation reaction. The results show that association kinetics can be resolved and that the initial steps of the reaction are not influenced by intermolecular interactions between the bound surfactants. The presented methodology is general, and further development should enable the study of complex cooperative kinetics of surfactant-polyelectrolyte systems.

Cetylpyridinium↗
PubMed2007

Probing the responsive behavior of polyelectrolyte brushes using electrochemical impedance spectroscopy.

Cyclic voltammetry and impedance spectroscopy were employed to probe the responsive properties of polyelectrolyte brushes. Poly[(dimethylamino)ethyl methacrylate] (PDMAEMA) brushes over 100 nm thick on gold substrates were synthesized via surface-initiated atom-transfer radical polymerization and quaternized with methane iodide to obtain cationic brushes (Q-PDMAEMA). Q-PDMAEMA brushes respond to electrolytes by exhibiting swollen and collapsed states. Swollen brushes allow good permeability of electroactive probes, while collapsed states block electron transport. Electrolytes have different impacts on the electrochemical properties of Q-PDMAEMA. Some salts (NaNO3) cause brush collapse due to charge screening, while others such as those with more hydrophobic anions (ClO4-, PF6-, and Tf2N-) induce brush collapse because of solubility changes. The collapsed brushes exhibit intrinsically different resistance as probed with impedance. Charged screened brushes retain good permeability to electroactive probes. Strongly coordinating hydrophobic anions lead to insoluble brushes, resulting in a high resistance. These results show that electrochemical impedance spectroscopy is a powerful technique to probe the properties and structure of polyelectrolyte brushes.

Journal Article↗
PubMed1999

Immunoassay techniques for detection of the herbicide simazine based on use of oppositely charged water-soluble polyelectrolytes.

Linear water-soluble polyelectrolytes, i.e., poly(methacrylate) polyanion and poly(N-ethyl-4-vinylpyridinium) polycation, were used as carriers for the reactants in immunoassay. The strength of ionic forces through distance and the cooperative binding of oppositely charged chains, the carriers interact with each other at an extremely high rate and affinity. These properties of the polyelectrolytes made it possible to carry out the immunochemical steps of the assay in true solution and then to quickly separate the resulting products from the reaction mixtures. The above approach was applied to an assay for the herbicide simazine. Both enzyme-linked immunosorbent assay (ELISA) and dot blot formats of the immunoassay were evaluated. In the ELISA format, the polycation was adsorbed on the surface of a microtiter plate. A tracer antigen (simazine) was allowed to interact in solution with components of the reaction mixture containing simazine-peroxidase conjugate, specific antibodies, and staphylococcal protein A conjugated with the polyanion, and then the mixture was added to the immobilized polycation. Quick separation of the immunoreactants was achieved due to formation of interpolyelectrolyte complexes between polycation and polyanion molecules. After washing, the microplate wells were filled with a solution of substrate, and the optical density of the reaction products was measured. In the second format, a solution of the same reaction mixture (after incubation) was filtered through a porous membrane, with the polycation adsorbed. The subsequent addition of substrate led to the development of colored spots. Sensitivity of the dot blot format was close to that of the traditional ELISA format using the same reactants, i.e., 0.5 ng/mL. However, the assay was much faster (assay time decreased from 100-120 to 45 min). Sensitivities of the dot immunoassay were 1 ng/mL for densitometric detection and 10 ng/mL for visual detection with a duration of 20 min. The techniques developed here were used for simazine determination in water, milk, and juices.

Electrolytes↗
PubMedDate not supplied

Polyelectrolyte complex micelles composed of c-raf antisense oligodeoxynucleotide-poly(ethylene glycol) conjugate and poly(ethylenimine): effect of systemic administration on tumor growth.

An antisense oligodeoxynucleotide (ODN) delivery system based on polyelectrolyte complex (PEC) micelles composed of an ODN-poly(ethylene glycol) (PEG) conjugate and polyethylenimine (PEI) was demonstrated. The PEC micelles having a core/shell structure were spontaneously formed in an aqueous solution by ionic interactions between ODN part in the conjugate and PEI. The ODN/PEI polyelectrolyte complex formed an inner core while PEG chains surrounded it as a shell. The morphology of the micelles was visualized as a separate sphere by atomic force microscopy (AFM). When the micelles containing a c-raf antisense ODN were intravenously administered into tumor-bearing nude mice, significant antitumor activities against human lung cancer were observed. The intravenously injected micelles also showed significantly higher accumulation level in the solid tumor region compared to that of naked ODN.

Animals↗
PubMedDate not supplied

Polyelectrolyte Complexes: Interactions between Lignosulfonate and Chitosan.

The interactions between high molecular weight chitosans (fraction of acetylated units (F(A)) = 0.10 or 0.50) and lignosulfonates of varying molecular weights (5000-400000 g/mol) and degrees of sulfonation (0.39-0.64) were studied. Lignosulfonates and chitosans form primarily insoluble polyelectrolyte complexes when mixed at pH 4.5, where the polymers are oppositely charged. In contrast, no complex formation occurred at pH 8, as shown by using a chitosan with F(A) = 0.50, which is soluble at this pH. Thus, a positively charged chitosan is a prerequisite for interactions leading to insoluble complexes with lignosulfonates. It is therefore unlikely that complex formation involves the formation of covalent sulfonylamide linkages as proposed in the literature. The composition of the complexes varied to some degree with the mixing ratio and molecular weight of lignosulfonate, but in most cases compact complexes with a sulfonate/amino ratio close to 1.0 were formed, suggesting that all sulfonate groups are accessible for interactions with chitosan. The influence of the ionic strength and temperature on the complex formation and the behavior of the precipitated complexes were in agreement with that expected for classical polyelectrolyte complexes where the associative phase separation is primarily governed by the increase in entropy due to the release of counterions.

Carbohydrate Sequence↗
PubMedDate not supplied

Cell interactions with polyelectrolyte multilayer films.

The short-term interactions of chondrosarcoma cells with polyelectrolyte multilayer films built up by the alternate adsorption of poly(L-lysine) (PLL) and poly(L-glutamic acid) (PGA) was studied in the presence and in the absence of serum. The films and their interaction with serum proteins were first characterized by means of optical waveguide lightmode spectroscopy, quartz crystal microbalance, and zeta potential measurements. In a serum-containing medium, the detachment forces measured by the micropipet technique were about eight times smaller on PGA-ending than on PLL-ending films. For these latter ones, the adhesion force decreased when the film thickness increased. In a serum-free medium, the differences between the negative- and positive-ending films were enhanced: adhesion forces on PLL-ending films were 40-100% higher, whereas no cellular adherence was found on PGA-terminating films. PGA-ending films were found to prevent the adsorption of serum proteins, whereas important protein adsorption was always observed on PLL-ending films. These results show how cell interactions with polyelectrolyte films can be tuned by the type of the outermost layer, the presence of proteins, and the number of layers in the film.

Blood Proteins↗
PubMedDate not supplied

Protein adsorption modalities on polyelectrolyte multilayers.

Protein adsorption on polyelectrolyte multilayers (PEMUs) was evaluated using a combination of synthetic polyelectrolytes and proteins, including serum albumin, fibrinogen, and lysozyme. Variables such as surface and protein charge, polymer hydrophobicity, and hydrophilic repulsion were introduced to probe interaction mechanisms. Quantitative analysis with reflectance Fourier transform infrared spectroscopy, optical waveguiding, and UV-vis absorption, together with qualitative information from atomic force microscopy, provided a coordinated picture for what drives protein adsorption and how the molecules are disposed on the multilayer surface. It was found that multilayers bearing a particular surface charge sorbed biomolecules if they were of opposite charge, yielding significant loadings within the bulk PEMU. Adsorption of like-charged proteins, as surface aggregates, occurred to a much lower extent, driven by nonelectrostatic forces. A diblock copolymer comprising a hydrophilic poly(ethylene oxide) block was capable of further minimizing protein adsorption as a result of hydrophilic repulsion, although none of the surfaces tested defeated protein adsorption completely. However, poly(acrylic acid) homopolymer was quite effective in this respect. A composition gradient, formed during multilayer buildup, induced a gradient in hydrophilicity through the PEMU, which is an efficient and economical method of creating a protein-resistant surface.

Adsorption↗
PubMedDate not supplied

Polyphosphazene polyelectrolytes: a link between the formation of noncovalent complexes with antigenic proteins and immunostimulating activity.

Polyphosphazene polyelectrolytes are potent immunostimulants. Their in vivo performance has been demonstrated for various antigens in a number of animal models. To improve understanding of the mechanism of action, we performed a comparative study in a model system: bovine serum albumin, BSA-poly[di(carboxylatophenoxy)phosphazene], PCPP, in vitro and in vivo. Multi-angle laser light scattering (MALLS) and size-exclusion HPLC methods were used to investigate polyphosphazene-protein formulations in an attempt to establish correlations between their physicochemical behavior and immunostimulating activity. These studies revealed the formation of water-soluble noncovalent protein-polymer complexes in the system. It was shown that both the amount of bound protein and the complex conformation could play an important role in the in vivo performance of the polyphosphazene polyelectrolytes.

Adjuvants, Immunologic↗
PubMedDate not supplied

Activity of enzymes immobilized in colloidal spherical polyelectrolyte brushes.

We investigate the enzymatic activity of glucoamylase and beta-glucosidase adsorbed on a novel type of colloidal particles. The particles used consist of a poly(styrene) core onto which long chains of poly(acrylic acid) or of poly(styrene sulfonic acid) are grafted ("spherical polyelectrolyte brush"). Proteins adsorb spontaneously onto these particles from aqueous solutions if the ionic strength is low. Moreover, the colloidal stability is not impeded by the adsorbed proteins despite the fact that up to 600 mg of enzyme is adsorbed per gram of the carrier particles. The activity of immobilized glucoamylase and beta-glucosidase adsorbed onto these particles is analyzed in terms of the Michaelis-Menten parameters. This analysis shows that both enzymes keep nearly their full activity. The Michaelis constant K(M) differs only slightly from the K(M) value of the native enzyme when the amount of adsorbed enzyme is raised despite the high local concentration of immobilized enzymes. All data demonstrate that spherical polyelectrolyte brushes present a novel way to immobilize enzymes.

Acrylic Resins↗
PubMedDate not supplied

Synthesis of conducting polyelectrolyte complexes of polyaniline and poly(2-acrylamido-3-methyl-1-propanesulfonic acid) catalyzed by pH-stable palm tree peroxidase.

Comparison of the stability of five plant peroxidases (horseradish, royal palm tree leaf, soybean, and cationic and anionic peanut peroxidases) was carried out under acidic conditions favorable for synthesis of polyelectrolyte complexes of polyaniline (PANI). It demonstrates that palm tree peroxidase has the highest stability. Using this peroxidase as a catalyst, the enzymatic synthesis of polyelectrolyte complexes of PANI and poly(2-acrylamido-3-methyl-1-propanesulfonic acid) (PAMPS) was developed. The template polymerization of aniline was carried out in aqueous buffer at pH 2.8. Varying the concentrations of aniline, PAMPS, and hydrogen peroxide as reagents, favorable conditions for production of PANI were determined. UV-vis-NIR absorption and EPR demonstrated that PAMPS and PANI formed the electroactive complex similar to PANI doped traditionally using low molecular weight sulfonic acids. The effect of pH on conformational variability of the complex was evaluated by UV-vis spectroscopy. Atomic force microscopy showed that a size of the particles of the PANI-PAMPS complexes varied between 10 and 25 nm, depending on a concentration of PAMPS in the complex. The dc conductivity of the complexes depends also on the content of PAMPS, the higher conductivity being for the complexes containing the lower content of the polymeric template.

Aniline Compounds↗
PubMedDate not supplied

Build-up of collagen and hyaluronic acid polyelectrolyte multilayers.

We have used a novel polyelectrolyte multilayer (PEM) coating consisting of the polyelectrolytes collagen and hyaluronic acid. The build-up by the layer-by-layer deposition technique is outlined by ex situ and in situ ellipsometric measurements. When collagen was added, the thickness of the PEM was increased, and the refractive index was decreased. Corresponding but opposite effects were noted when hyaluronic acid was added. These changes are considered to be explained by a diffusion mechanism. It was also found that the PEM layers were unstable at physiological pH. However, by cross-linking using N-(3-di-methylaminopropyl)-N'-ethylcarbodiimide together with N-hydroxysuccinimide, a stable PEM layer resulted. These tissue friendly PEM layers are expected to have a great impact in the design of artificial extracellular matrixes. Also, the insertion of fluorescence labels demonstrates the potential for incorporation of other functionalities.

Collagen↗
PubMedDate not supplied

Spontaneous loading of positively charged macromolecules into alginate-templated polyelectrolyte multilayer microcapsules.

A simple and high-efficiency approach to loading macromolecules into microscale carriers is presented. Calcium-cross-linked alginate hydrogel microspheres were fabricated by an emulsification technique and then used as negatively charged templates to form polyelectrolyte multilayer coatings. A calcium ion chelator, EDTA, was used to free the Ca(2+)-cross-linked alginate hydrogel within {poly(allylamine hydrochloride)/poly (styrene sulfonate)}(4) ({PAH/PSS}(4)) coating, allowing partial release of alginate. The retention of alginate in {PAH/PSS}(4) microcapsule was confirmed by FTIR spectroscopy and confocal microscopy. Real-time confocal microscopy was used to investigate the loading process of positively charged macromolecules (dextran-amino, and peroxidase) into alginate-templated microcapsules, which showed the loading occurred in <2 min for dextran-amino and <10 min for peroxidase, respectively. A high loading efficiency of 25 mug peroxidase in approximately 1.0 x 10(7) microcapsules (2.5 pg POx/capsule) was achieved with a low concentration of peroxidase loading solution (10 mug/mL). This spontaneous loading technique for encapsulating positively charged molecules in alginate-templated polyelectrolyte microcapsules shows strong potential for biosensor and drug delivery applications.

Alginates↗
PubMed2006

Effect of molecular weight and ionic strength on the formation of polyelectrolyte complexes based on poly(methacrylic acid) and chitosan.

Chitosan/poly(methacrylic acid) complexes, CS/PMAA, were prepared via dropwise addition of a solution of PMAA to a solution of chitosan in acetic acid 2 wt %. The increase in molecular weight of PMAA inhibited the formation of insoluble complexes, while the increase in ionic strength first favored the formation of the complex followed by inhibiting it at higher concentrations. These observations were related to a description of polyelectrolyte complexation that was strongly dependent on macromolecular dimensions, both in terms of molecular weight and of coil expansion/contraction driven by polyelectrolyte effect.

Chitosan↗
PubMed2007

Development of improved nanoparticulate polyelectrolyte complex physicochemistry by nonstoichiometric mixing of polyions with similar molecular weights.

Water-based, biodegradable polyelectrolyte complex dispersions (PECs) prepared by mixing oppositely charged polyions are advantageous drug delivery systems due to constituent biocompatibility and nanoparticulate architectures. Reaction phase environmental parameters dictate PEC physicochemical properties, and specifically, complexation between polyelectrolytes having significantly different molecular weights leads to formation of water-insoluble aggregates. Starting with this fact, four-component similar and dissimilar molecular weight PEC chemistries were applied and compared with and without frequency-induced dispergation. The goal was to define nanoparticulate PEC systems with desirable characteristics for use in biological systems. Results show PEC formulations from precursors with similar low molecular weights yielded dispersions with suitable physicochemical characteristics, as verified by photon correlation spectroscopy and TEM, presumably due to efficient ion pairing. Similar low molecular weight PECs fabricated with dispergation exhibited pH-independent stability, as validated by charge and size measurements. These physicochemical advantages lead to an ideal delivery platform.

Biocompatible Materials↗
PubMed2006

Glycated polyelectrolyte multilayer films: differential adhesion of primary versus tumor cells.

Glycated polymers have already been widely employed for cell transfection studies, as cells possess specific lectins. However, up to now, these glycated polymers have barely been investigated for their cell adhesive properties, save macrophages. In this work, we use polyelectrolyte multilayer films made of poly(L-lysine) and poly(L-glutamic) acid as polymeric substrates to investigate the role of sugar molecules (e.g., mannose and lactose) on the adhesion of primary cells as compared to that of a tumor cell line. The glycated polymeric films were compared to ungrafted and chemically cross-linked films, which are known to present opposite adhesive properties. A differential adhesion could be evidenced on mannose grafted films: primary chondrocytes adhere and proliferate well on these films, whereas chondrosarcoma cells do not grow well. Although present, the effect of lactose on cell adhesion was much less important. This adhesion, mediated by glycated polymers, appears to be specific. These results show that it is possible to use glycated polyelectrolytes not only as nonviral vectors but also as cell adhesive substrates.

Adhesiveness↗
PubMedDate not supplied

Characterization and polyelectrolyte precipitation of beta-galactosidase containing genetic fusions of charged polypeptides.

Genetically engineered versions of beta-galactosidase were constructed through the addition of charged polypeptide fusion tails for the purpose of enhancing polyelectrolyte precipitation. Negatively charged aspartic acid tails and positively charged poly(arginine) tails were added to beta-galactosidase from Escherichia coli. These fusion proteins were all shown to possess specific activity equal to that of the native enzyme. Gel permeation and ion-exchange chromatography provided evidence concerning the integrity of the tails as well as their altered charge characteristics. All enzymes containing charged tails displayed enhanced polyelectrolyte precipitation over the native enzyme. An optimal number of charged residues, beyond which no further enhancement of precipitation was observed, was found to be approximately 10 residues for each type of tail. No interference from nucleic acids was observed in the precipitation of positively tailed beta-galactosidase.

Acrylic Resins↗
PubMedDate not supplied

Entrapment of a weak polyanion and H+/Na+ exchange in confined polyelectrolyte microcapsules.

An approach for the entrapment of a polyanion by polyelectrolyte microcapsules is reported. It is based on a reversal changing of microcapsule wall permeability from neutral to basic pH. Polyelectrolyte microcapsules were templated on latex (polystyrene) particles by the layer-by-layer adsorption of oppositely charged polymers of sodium poly(styrene sulfonate) and poly(allylamine hydrochloride), followed by core removal using tetrahydrofuran. In alkaline conditions, the microcapsules swell and become permeable for polymers. During encapsulation, the addition of salt ions increases the amount of the polymer encapsulated and contributes to its protonation because of redistribution of H+ ions across a semipermeable microcapsule wall. The redistribution of small ions across the microcapsule wall was tuned by adding salt according to the Donnan equilibrium and was characterized by H+ sensitive dyes.

Algorithms↗
PubMed2001

Polarity of layer-by-layer deposited polyelectrolyte films as determined by pyrene fluorescence.

The polarity of polyelectrolyte (PE) multilayer films is investigated with pyrene as a polarity-sensitive probe. Multilayer films of poly(styrene sulfonate) (PSS) and various polycations were prepared by the layer-by-layer self-assembly technique. Pyrene (PY) molecules were inserted into the films by exposing the multilayers to pyrene solutions. By this method a homogeneous distribution of pyrene molecules at low concentration within the film was obtained. The ratio of the fluorescence intensities of the first (I) to the third (III) vibronic band (Py-value) of the pyrene emission spectrum is employed here to determine the polarity of the PE films. PSS and poly(allylamine hydrochloride) (PAH) multilayer films yielded a pyrene value close to the solvent polarity of acetone, while multilayers of PSS and poly(diallyldimethylammonium chloride) (PDADMAC) displayed a value higher than the one corresponding to water. The pyrene values of the polyelectrolyte films were independent from the solvent employed for probe dissolving. Although no direct relationship between solvent polarity and dielectric constant (epsilon) is available, an estimate of the static dielectric constant of the films can be provided by comparing the Py-values of the films with those of various solvents. Changes in the humidity conditions of the film environment in a closed cell did not affect the film polarity. However, a drastic and irreversible reduction of polarity could be induced by actively drying the samples by a nitrogen flow.

Journal Article↗