Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Humidity”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21Linked to original sources

Effect of humidity on lung surfactant films subjected to dynamic compression/expansion cycles.

The surface activity of bovine lipid extracted surfactant (BLES) preparations used in surfactant replacement therapy is studied in dynamic film compression/expansion cycles as a function of relative humidity, surfactant concentration, compression rate, and compression periodicity. BLES droplets were formed in a constrained sessile droplet configuration (CSD). Images obtained during cycling were analyzed using axisymmetric drop shape analysis (ADSA) to yield surface tension, surface area, and drop volume data. The experiments were conducted in a chamber that allowed both humid (100% RH), and "dry" air (i.e. less than 20% RH) environments. It was observed that in humid environments BLES films are not stable and tend to have poor surface activity compared to BLES films exposed to dry air. Further analysis of the data reveal that if BLES films are compressed fast enough (i.e. at physiological conditions) to avoid film hydration, lower minimum surface tensions are achieved. A film hydration-relaxation mechanism is proposed to explain these observations.

Animals↗

Humidity and aggregate content correction factors for air-coupled ultrasonic evaluation of concrete.

This paper describes the use of non-contact ultrasound for the evaluation of concrete. Micromachined capacitance transducers are used to transmit ultrasonic longitudinal chirp signals through concrete samples using air as the coupling medium, and a pulse compression technique is then employed for measurement of time of flight through the sample. The effect on the ultrasonic wave speed of storing concrete samples, made with the same water/cement ratio, at different humidity levels is investigated. It is shown that there is a correlation between humidity and speed of sound, allowing a correction factor for humidity to be derived. A strong positive linear correlation between aggregate content and speed of sound was then observed; there was no obvious correlation between compressive strength and speed of sound. The results from the non-contact system are compared with that from a contact system, and conclusions drawn concerning coupling of energy into the samples.

Air↗

Influence of temperature and relative humidity on the moulting success of Amblyomma limbatum and Aponomma hydrosauri (Acari: Ixodidae) larvae and nymphs.

This study compared the duration of the moulting periods of engorged larvae and nymphs of the ixodid ticks, Amblyomma limbatum and Aponomma hydrosauri, at different temperature/relative humidity regimes, and examined the relationships between the engorged weight of ticks and their weights after moulting. The results showed that for each species, there was a significant relationship between the weights of unfed nymphs and engorged larvae, and the weights of unfed adults and engorged nymphs. The weight of engorged nymphs was also a good indicator of their sex, with female ticks having heavier weights as engorged nymphs. Temperature and relative humidity had a marked effect on the moulting success of engorged ticks of both species. Aponomma hydrosauri larvae and nymphs were able to moult at lower temperatures than Amb. limbatum but most ticks, except Ap. hydrosauri larvae, failed to moult at 13 degrees C. Additionally, there was a marked decrease in the pre-moult times of ticks at higher temperatures, with larvae taking less time to moult than nymphs. At temperatures greater than 21 degrees C, Amb. limbatum took less time to moult than Ap. hydrosauri but this interspecific difference was less marked for nymphs. The interspecific differences in the responses of engorged larvae and nymphs to different temperatures and relative humidities correlated with interspecific differences in off-host behaviour and with the different climates the two species experience throughout most of their distributional range.

Animals↗

Use of inverse gas chromatography to characterize cotton fabrics and their interactions with fragrance molecules at controlled relative humidity.

The present work focused on the surface characterization and fragrance interactions of a common cotton towel at different relative humidities (RHs) using inverse gas chromatography (IGC) and dynamic vapour sorption. The sigmoidal water sorption isotherms showed a maximum of 16% (w/w) water uptake with limited swelling at 100% RH. This means that water interacts strongly with cotton and might change its initial physico-chemical properties. The same cotton towel was then packed in a glass column and characterized by IGC at different relative humidities, calculating the dispersive and specific surface energy components. The dispersive component of the surface energy decreases slightly as a function of relative humidity (42 mJ/m2 at 0% RH to 36 mJ/m2 at 80% RH) which would be expected from swelling of the humidified cotton. The Gutmann's donor constant Kd increased from 0.28 kJ/mol at 0% RH to 0.42 kJ/mol at 80% RH, indicating that a greater hydrophilic surface exists at 80% RH, which is also as expected. Water, undecane and four fragrance molecules (dimetol, benzyl acetate, decanal and phenylethanol) were used to investigate cotton-fragrance interactions between 0 and 80% RH. The adsorption enthalpies and the Henry's constants were calculated and are discussed. The higher values for the adsorption enthalpies of polar molecules such as dimetol and phenylethanol suggest the presence of hydrogen bonds as the main adsorption mechanism. The Henry's constant of dimetol was also determined by headspace gas chromatography measurements at 20% RH, giving a similar value (230 nmol/Pa g by IGC and 130 nmol/Pa g by headspace GC), supporting the usefulness of IGC for such determinations. This work confirms the usefulness of chromatographic methods to investigate biopolymers such as textiles, starches and hairs.

Chromatography, Gas↗

Change in secondary structure of silk fibroin during preparation of its microspheres by spray-drying and exposure to humid atmosphere.

Silk microspheres prepared by spray-drying were exposed to humid atmosphere (89% relative humidity, RH). Change in the secondary structure of silk fibroin during preparation of silk microspheres and exposure to high humidity was studied. Scoured silk fiber was dissolved in an aqueous solution of calcium chloride mixed with ethanol. After dialysis against purified water, theophylline was added to the solution as a model drug. Silk microspheres were obtained by spray-drying. Silk fibroin and theophylline were found to be amorphous in the microsphere by means of powder X-ray diffractometry. Fibroin assumed a beta-sheet conformation in the scoured silk fiber while it has an irregular structure in the microsphere, according to FTIR and Raman spectra. Fibroin recrystallized and its secondary structure changed to beta-sheet conformation by exposure of the microspheres to an atmosphere of 89% RH.

Fibroins↗

The effects of temperature and humidity on the off-host survival of Psoroptes ovis and Psoroptes cuniculi.

The effects of both temperature and humidity on the survival of the mites Psoroptes ovis and Psoroptes cuniculi were considered in laboratory assays. When P. ovis and P. cuniculi were maintained at 95% humidity, maximum survival decreased linearly with increasing temperature, from approximately 15 days at 9 degrees C to 5 days at 30 degrees C. There was no significant difference between P. ovis and P. cuniculi in the effects of temperature on maximum survival. Adult male P. ovis and P. cuniculi had lower mean maximum survival than any of the other life cycle stages. There was a small but significant effect of humidity on survival for P. cuniculi; LT50 values were greater at 75-85% r.h. than at 55-65% r.h. The influence of off-host survival and the infestation of naive sheep from mites in the environment on the epidemiology of sheep scab are discussed.

Animals↗

Hydrophilic membrane-based humidity control.

A dehumidification system for low gravity plant growth experiments requires the generation of no free-liquid condensate and the recovery of water for reuse. In the systems discussed in this paper, the membrane is a barrier between the humid air phase and a liquid-coolant water phase. The coolant water temperature combined with a transmembrane pressure differential establishes a water flux from the humid air into the coolant water. Building on the work of others, we directly compared different hydrophilic membranes for humidity control. In a direct comparison of the hydrophilic membranes, hollow fiber cellulose ester membranes were superior to metal and ceramic membranes in the categories of condensation flux per surface area, ease of start-up, and stability. However, cellulose ester membranes were inferior to metal membranes in one significant category, durability. Dehumidification systems using mixed cellulose ester membranes failed after operational times of only hours to days. We propose that the ratio of fluid surface area to membrane material area (approximately = membrane porosity) controls the relative performances among membranes. In addition, we clarified design equations for operational parameters such as the transmembrane pressure differential. This technology has several potential benefits related to earth environmental issues including the minimization of airborne pathogen release and higher energy efficiency in air conditioning equipment. Utilizing these study results, we designed, constructed, and flew on the space shuttle missions a membrane-based dehumidification system for a plant growth chamber.

Air Conditioning↗

Upper airway irritation of terpene/ozone oxidation products (TOPS). Dependence on reaction time, relative humidity and initial ozone concentration.

Recently, we reported the formation of unidentified strong upper airway irritants in reaction mixtures of terpenes and ozone. The identified products included aldehydes, ketones and carboxylic acids. Here we report the effects of variation of reaction time, relative humidity and initial ozone concentration on irritant formation in a flow reaction system using R-(+)-limonene and isoprene. Upper airway irritation was measured in mice as reduction of the respiratory rate. For both substances maximum irritation was observed for low humidity (<2% RH)/short time (16-30 s) reaction mixtures, and both moderate humidity ( approximately 32% RH) and longer reaction times (60-90 s) resulted in significantly less irritation. These results suggest that some unidentified intermediates react with water vapor to give less irritating products. Irritation measured at four ozone concentrations (0.5, 1, 2 and 3.5 ppm) using low humidity/short time reaction conditions for limonene (50 ppm) and isoprene (500 ppm) revealed that at 0.5 ppm, irritation was at the same level as that for the pure terpenes, indicating that at 0.5 ppm ozone the combined irritant effect was near the no effect level for the product mixture.

Animals↗

The survival of Escherichia coli in an aerosol at air temperatures of 15 and 30 degrees C and a range of humidities.

The survival of Escherichia coli in an aerosol was studied at several temperatures and over a range of relative humidities using a Henderson apparatus. Death occurred in two phases, the first lasting approximately 1 min; in the second the number of viable microorganisms declined exponentially. E. coli was robust and remained viable for many hours. Death was most rapid at low humidities (less than 50% r.h.) at 15 and 30 degrees C, with half-lives of 14 and 3 min respectively. In humid conditions the half-lives were much longer, approximately 83 and 14 min respectively. Based on this work, preliminary recommendations for the climate of livestock buildings can now be given to control the airborne spread of E. coli.

Air Microbiology↗

Near-infrared measurement of relative and absolute humidity through detection of water adsorbed on a silica gel layer.

Near-IR spectroscopy is especially well suited to moisture determination because of the relatively high absorptivity of water compared to most other substances. In the present work, near-IR diffuse-transmittance spectroscopy is applied to the measurement of humidity via observation of adsorbed water on a high-performance thin-layer chromatography silica gel plate. The adsorbed water is detected through both ordinary absorption of radiation by water molecules and the increased scattering of near-IR radiation by the silica gel as it adsorbs more water. This technique shows promise as a highly accurate and sensitive humidity sensor with a time constant of less than 1 min. The addition of inorganic salts to the silica gel layer is shown to increase the response to water vapor. However, it also increases the time constant of the sensor. A miniature humidity sensor using a commercially available near-IR transmissive switch is also demonstrated. Possible interferences and hysteresis effects are investigated.

Adsorption↗

Effect of temperature and humidity on the formation of dibutylurea in benlate fungicide.

Benomyl [methyl 1-(butylcarbamoyl)-2-benzimidazolecarbamate] is the active ingredient in DuPont Benlate fungicides. The formation of N, N'-dibutylurea (DBU), a phytotoxic degradation product of benomyl, in Benlate formulations was evaluated by analyzing Benlate samples maintained under simulated storage conditions and assessing the effects of temperature and humidity on sample moisture content, benomyl degradation, and the rate of DBU formation. Benomyl degraded during storage by the elimination of n-butylisocyanate (BIC) to form methyl 2-benzimidazole carbamate (MBC; carbendazim). Liberated BIC could then proceed to react with water to form DBU (first-order rate constant of 8.4 x 10(-)(4) s (-)(1)). The degradation of benomyl and subsequent formation of DBU were dependent on the temperature and highly dependent on the humidity of the storage environment. At the lower humidity storage conditions the rates of DBU formation were significantly higher in the dry flowable (DF) formulation than in the wettable powder (WP) formulation. The initial moisture content of Benlate DF samples was higher than those of Benlate WP samples, although the Benlate WP samples absorbed more moisture upon incubation. These results may yield insight on the appearance of high levels of DBU found in some boxes and bags of Benlate DF and Benlate WP formulations.

Benomyl↗

Surfactant effects on cuticular penetration of neutral polar compounds: dependence on humidity and temperature.

Effects of poly(ethylene glycol) (PEG 400) and polydisperse fatty alcohol ethoxylates ("Genapols") on methylglucose penetration across cuticles of Pyrus communis were studied under different humidities and temperatures. All surfactants increased methylglucose penetration better than PEG 400. The efficacy was proportional to their own penetration. Genapol C-100 (C12.5E8.4; C, average number of carbon atoms in the alkyl chain; E, average number of ethoxy groups) effects were strongly concentration dependent (0.2-5 g/L). At 2 g/L distinct differences between surfactants were observed. Effects of Genapol C-050 (C12.5E5.8) did not depend on humidity (11-93% RH) and temperature (15-35 degrees C). They were maximal after application but decreased rapidly due to surfactant penetration. Genapol C-200 (C12.5E17) effects increased strongly with humidity and temperature both of which prevented its solidification. Genapol C-100 was superior under most conditions and never failed to increase penetration. There was no simple relationship between ethylene oxide content and surfactant effect.

Fatty Alcohols↗

Humidity and temperature effects on CTAB-templated mesophase silicate films at the air-liquid interface.

Off-specular X-ray reflectivity measurements were carried out to follow the in situ development of surfactant-templated silica thin films at the air-water interface under conditions of controlled relative humidity and temperature, using an enclosed sample cell designed for this purpose. The results suggest a strong dependence of formation time and growth mechanism on ambient conditions. Thin films were synthesized at the air-water interface using cetyltrimethylammonium bromide (CTAB, 0.075 M) and a silica precursor, tetramethoxysilane (TMOS, 0.29-0.80 M) in an acidic medium. The studied humidity range was from 50 to 100%, the temperature was between 25 and 40 degrees C, and the TMOS/CTAB molar ratio was between 3.3 and 10.7. We observed that high humidity slows down the growth process due to lack of evaporation. However, increasing the temperature results in a decrease in the film-formation time. We proposed a formation mechanism for film growth as a consequence of phase separation, organic array assembly, and silica polymerization.

Air↗

Dependence of the entomopathogenic fungus, Beauveria bassiana, on high humidity for infection of Rhodnius prolixus.

The impact of relative humidity (RH) on the infective potential of the isolate Bb INRA 297 of Beauveria bassiana (Bals.) Vuillemin (Deuteromycotina: Hyphomycetes) against first instar nymphs of Rhodnius prolixus Stål. (Hemiptera: Reduviidae) was determined. Fungus-treated insects were exposed to RHs ranged from 75 to 100% at 25 degrees C. Results clearly showed a threshold of humidity at ca. 96% for high and rapid mortality. After initial exposure to increasing periods of 97% (4, 8, 16, 24, 36 and 48 h) and subsequent transfer to constant lower RHs (43, 53, 75 and 86%) at a constant 25 degrees C, an incubation of at least 48 h at 97% RH was necessary to kill all insects. On changing RHs of 97/75% and different regimes of temperature (15/28 degrees C, 20/25 degrees C, 25/28 degrees C, and 25/35 degrees C), at least 72 h of initial exposure at 97% RH for the 15/28 degrees C regime, 48 h for the 20 degrees/25 degrees C and 25/28 degrees C regimes and 36 h for 25/35 degrees C were needed to kill all insects over a 6-day incubation time. Delayed exposure to favorable moisture condition (97% RH), significantly affected infection for up to a 3-day delay within the various temperature-humidity regimes tested.

Animals↗

Water vapor sorption of water-soluble substances: studies of crystalline solids below their critical relative humidities.

Water vapor sorption on unground and ground samples of sodium chloride and sodium salicylate at relative humidities below RHo, that at which deliquescence is initiated, has been measured. Sorption isotherms, expressed as the amount sorbed per unit area of solid surface, were different for unground and ground samples. Measurement of specific surface area for samples previously exposed to various relative humidities revealed no change with unground samples but a significant reduction with ground samples beyond about 20% relative humidity. Correcting isotherms for this change in area brings the results with ground and unground samples into closer agreement. These studies reveal that relatively low levels of water vapor sorption on crystalline water-soluble solids, below RHo, can give rise to some form of "surface dissolution" when the solid had been subjected to various forms of mechanical disturbance.

Absorption↗

Phytoseiid mites in protected crops: the effect of humidity and food availability on egg hatch and adult life span of Iphiseius degenerans, Neoseiulus cucumeris, N. californicus and Phytoseiulus persimilis (Acari: Phytoseiidae).

The effect of relative humidity on egg hatch success for Iphiseius degenerans, Neoseiulus californicus and N. cucumeris was described by a binomial model with a parallel slope. The shape of the response differed for Phytoseiulus persimilis and a model with separate parameters gave a significantly better fit. Fitted response curves showed that I. degenerans, N. cucumeris, N. californicus and P. persimilis were ranked by decreasing tolerance to low humidity, with egg mortalities of < 0.5, 3, 12 and 16% respectively at 75-80% RH at 20 degrees C. Egg stage duration for I. degenerans and N. cucumeris was unaffected over the range 60-82% RH. For N. californicus and P. persimilis egg duration was significantly longer at 60 and 70% than for either 82 or 90% RH. No effect of relative humidity was found on the mean life span of adult females when food was available continuously to the mites. N. californicus lived significantly longer (58 days after the first egg was laid) than the other species. No significant difference was observed in mean life span between adult females of I. degenerans and N. cucumeris (25 and 28 days respectively). The mean life span of adult female P. persimilis (19 days) was significantly shorter than the other species. In the absence of both food and water, the survival of adult female mites was reduced to 2-4 days. Survival time was at least doubled when free water was available in the absence of food. Mean survival of adult female mites with water but without food was 10 days for N. cucumeris, 18 days for N. californicus, 6 days for P. persimilis and 4 days for I. degenerans. Survival of adult female N. cucumeris and N. californicus was increased significantly, to 20 and 22 days respectively, when fungal hyphae were present along with water but in the absence of other food.

Animals↗

Effects of humidity on reproductive behavior in male and female zebra finches (Taeniopygia guttata).

Zebra finches (Taeniopygia guttata) are regarded as opportunistic breeders with reproductive behaviors mediated by short-term proximal environmental conditions. This article provides experimental evidence for the role of humidity in reproductive behaviors. Zebra finches were subjected to experimentally manipulated high levels of relative humidity. Males gathered more nest material and sang more. Females showed no relationship between humidity and gathering nest materials, egg laying, or changes in rates of vocalization.

Animals↗

Development rates of two Xenopsylla flea species in relation to air temperature and humidity.

The rate of development of immature fleas, Xenopsylla conformis Wagner and Xenopsylla ramesis Rothschild (Siphonaptera: Xenopsyllidae) was studied in the laboratory at 25 degrees C and 28 degrees C with 40, 55, 75 and 92% relative humidity (RH). These fleas are separately associated with the host jird Meriones crassus Sundevall in different microhabitats of the Ramon erosion cirque, Negev Highlands, Israel. This study of basic climatic factors in relation to flea bionomics provides the basis for ecological investigations to interpret reasons for paratopic local distributions of these two species of congeneric fleas on the same host. Both air temperature and RH were positively correlated with duration of egg and larval stages in both species. Change of humidity between egg and larval environments did not affect duration of larval development at any temperature. At each temperature and RH, the eggs and larvae of X. ramesis did not differ between males and females in the duration of their development, whereas female eggs and larvae of X. conformis usually developed significantly faster than those of males. For both species, male pupae developed slower than female pupae at the same air temperature and RH. Air temperature, but not RH, affected the duration of pupal development. At each humidity, duration of the pupal stage was significantly longer at 25 degrees C than at 28 degrees C: 15.3+/-1.7 vs. 11.7+/-1.2 days in X. conformis; 14.1+/-2.0 vs. 11.5+/-1.7 days in X. ramesis, with a significantly shorter pupal period of the latter species at 25 degrees C. These limited interspecific bionomic contrasts in relation to basic climatic factors appear insufficient to explain the differential habitat distributions of X. conformis and X. ramesis.

Animals↗