Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Cellulose”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21Linked to original sources
PubMed2006

Evaluation of carbopol-methyl cellulose based sustained-release ocular delivery system for pefloxacin mesylate using rabbit eye model.

The major purpose of this study was to develop and characterize a series of carbopol- and methyl cellulose-based solutions as the in situ gelling vehicles for ophthalmic drug delivery. The rheological properties, in vitro release as well as in vivo pharmacological response of a combination of polymer solutions, including carbopol and methyl cellulose, were evaluated. It was found that the optimum concentration of carbopol solution for the in situ gel-forming delivery systems was 0.3% (w/w), and that for methyl cellulose solution was 1.5% (w/w). The mixture of 0.3% carbopol and 1.5% methyl cellulose solutions showed a significant enhancement in gel strength in the physiological condition; this gel mixture was also found to be free flowing at pH 4.0 and 25 degrees C. The rheological behaviors of carbopol/methyl cellulose solution were not affected by the incorporation of the drug. Drug levels in the aqueous humor of the rabbits were well above the MIC-values of relevant bacteria after 12 hours, the results of an optimized formulation containing 0.18% of pefloxacin mesylate compared well with the 0.3% marketed eye drop formulation, indicating our formulation to be significantly better considering that a similar effect was obtained at half the concentration. Both the in vitro release and in vivo pharmacological studies indicated that the carbopol/methyl cellulose solution had better ability to retain drug than did the carbopol or methyl cellulose solutions alone. The results demonstrated that the carbopol/methyl cellulose mixture can be used as an in situ gelling vehicle to enhance the ocular bioavailability of pefloxacin mesylate.

Acrylic Resins↗
PubMed1972

Changes in Molecular Weight of Cellulose in the Pea Epicotyl during Growth.

A procedure is described for preparing cellulose nitrate from pea tissues (Pisum sativum L. var. Alaska) in quantitative yield, undegraded and uncontaminated by other polysaccharides. The average degree of polymerization of this product, estimated from viscosity measurements, increased during cell growth and development from a value of about 5000 glucose units in the apical meristem (plumule plus hook) to values near 8000 in fully grown maturing tissues (>20 mm from apex). The cellulose content per cell also increased (approximately 10-fold) during growth in these tissues, as did particulate glucan synthetase activity (3-fold rise). Since the yield of soluble cellulase activity is known to decrease from high values in the meristem to barely detectable amounts in mature tissues, it is suggested that the relative levels and properties of these hydrolytic and synthetic enzyme activities control the amount and degree of polymerization of cellulose formed during cell expansion in the pea epicotyl.Degree of polymerization distribution patterns showed that a low molecular weight component of cellulose (degree of polymerization < 500) was prominent in young tissues whereas high molecular weight components (degree of polymerization > 7000) predominated in mature tissues. Also, cellulose which was formed from radioactive sucrose during 30 minutes of incubation showed a remarkably similar degree of polymerization distribution to cellulose which was present in the tissue at the time of synthesis. It is concluded that new and old parts of the epicotyl cellulose framework are subject to constant modification and equilibration by cellulose-metabolizing enzymes.

Journal Article↗
PubMed1990

Oxygen and Hydrogen Isotope Fractionation during Cellulose Metabolism in Lemna gibba L.

Lemna gibba L. B3 was grown under heterotrophic, photoheterotrophic, and autotrophic conditions in water having a variety of hydrogen and oxygen isotopic compositions. The slopes of the linear regression lines between the isotopic composition of water and leaf cellulose indicated that under the three growth conditions about 40, 70, and 100% of oxygens and carbon-bound hydrogens of cellulose exchanged with those of water prior to cellulose formation. Using the equations of the linear relationships, we estimated the overall fractionation factors between water and the exchanged oxygen and carbon bound-hydrogen of cellulose. At least two very different isotope effects must determine the hydrogen isotopic composition of Lemna cellulose. One reflects the photosynthetic reduction of NADP, while the second reflects exchange reactions that occur subsequent to NADP reduction. Oxygen isotopic composition of cellulose apparently is determined by a single type of exchange reaction with water. Under different growth conditions, variations in metabolic fluxes affect the hydrogen isotopic composition of cellulose by influencing the extent to which the two isotope effects mentioned above are recorded. The oxygen isotopic composition of cellulose is not affected by such changes in growth conditions.

Journal Article↗
PubMed2000

Pattern of non-methanogenic and methanogenic degradation of cellulose in anoxic rice field soil.

Rice field soils turn anoxic upon flooding. The complete mineralization of organic matter, e.g. cellulose, to gaseous products is then accomplished by the sequential reduction of nitrate, ferric iron, sulfate and finally by methanogenesis. Therefore, the anaerobic turnover of [U-(14)C]cellulose was investigated in fresh, non-methanogenic and in preincubated, methanogenic slurries of Italian rice field soil. In anoxic soil slurries freshly prepared from air-dried soil [U-(14)C]cellulose was converted to (14)CO(2) and (14)CH(4) in a ratio of 3:1. In methanogenic soil slurries, on the other hand, which had been preincubated for 45 days under anaerobic conditions, [U-(14)C]cellulose was converted to (14)CO(2) and (14)CH(4) in the ratio of 1:1. The turnover times (7-14 days) of cellulose degradation were not significantly different (P0.05) in fresh and methanogenic soil. Chloroform addition abolished CH(4) production, but only slightly (30%) inhibited cellulose degradation in both fresh and methanogenic soil. Under both soil conditions, [(14)C]acetate was the only labeled intermediate detected. A maximum of 24% of the applied radioactivity was transiently accumulated as [(14)C]acetate in both fresh and methanogenic soil slurries. However, when methanogenesis was inhibited by chloroform, 46% and 66% of the applied radioactivity were recovered as [(14)C]acetate in fresh and methanogenic soil, respectively. Only non-radioactive propionate accumulated during the incubation with [U-(14)C]cellulose, especially in the presence of chloroform, indicating that propionate was produced from substrates other than cellulose.

Journal Article↗
PubMed1985

Metabolism and Solubilization of Cellulose by Clostridium cellulolyticum H10.

When Clostridium cellulolyticum was grown with cellulose MN300 as the substrate, the rates of growth and metabolite production were found to be lower than those observed with soluble sugars as the substrate. At low cellulose concentrations, the growth yields were equal to those obtained with cellobiose. The main fermentation products from cellulose and soluble sugars were the same. Up to 15 mM of consumed hexose, a change in the metabolic pathway favoring lactate production similar to that observed with soluble sugars was found to occur concomitantly with a decrease in molar growth yield. With cellulose concentrations above 5 g/liter, accumulation of soluble sugars occurred once growth had ceased. Glucose accounted for 30% of these sugars. A kinetic analysis of cellulose solubilization revealed that cellulolysis by C. cellulolyticum involved three stages whatever cellulose concentration was used. Analysis of these kinetics showed three consecutive enzymatic activity levels having the same K(m) (0.8 g of cellulose per liter, i.e., 5 mM hexose equivalent) but decreasing values of V(max). The hypothesis is suggested that each step corresponds to differences in cellulose structure.

Journal Article↗
PubMed1994

Three Native Cellulose-Depolymerizing Endoglucanases from Solid-Substrate Cultures of the Brown Rot Fungus Meruliporia (Serpula) incrassata.

Three extracellular cellulose-depolymerizing enzymes from cotton undergoing decay by the brown rot fungus Meruliporia (Serpula) incrassata were isolated by anion-exchange and hydrophobic interaction chromatographies. Depolymerization was detected by analyzing the changes in the molecular size distribution of cotton cellulose by high-performance size-exclusion chromatography. The average degree of polymerization (DP; number of glucosyl residues per cellulose chain) was calculated from the size-exclusion chromatography data. The very acidic purified endoglucanases, Cel 25, Cel 49, and Cel 57, were glycosylated and had molecular weights of 25,200, 48,500, and 57,100, respectively. Two, Cel 25 and Cel 49, depolymerized cotton cellulose and were also very active on carboxymethyl cellulose (CMC). Cel 57, by contrast, significantly depolymerized cotton cellulose but did not release reducing sugars from CMC and only very slightly reduced the viscosity of CMC solutions. Molecular size distributions of cotton cellulose attacked by the three endoglucanases revealed single major peaks that shifted to lower DP positions. A second smaller peak (DP, 10 to 20) was also observed in the size-exclusion chromatograms of cotton attacked by Cel 49 and Cel 57. Under the reaction conditions used, Cel 25, the most active of the cellulases, reduced the weight average DP from 3,438 to 315, solubilizing approximately 20% of the cellulose. The weight average DP values of cotton attacked under the same conditions by Cel 49 and Cel 57 were 814 and 534; weight losses were 9 and 11% respectively.

Journal Article↗
PubMed1996

Two regulatory regions controlling basal and cellulose-induced expression of the gene encoding cellobiohydrolase I of Trichoderma reesei are adjacent to its TATA box.

The cellulolytic system of the filamentous fungus Trichoderma reesei is transcriptionally induced in the presence of the insoluble polymer cellulose. Previous studies have demonstrated that induction of the cellulose transcripts by cellulose requires basal expression of its own genes. To understand how basal expression controls cellulose-induced transcription of those genes, we analyzed the 5'-flanking region of the gene encoding cellobiohydrolase I (cbh1), the major member of the cellulase system, for the cis-acting region that is responsible for regulating basal and cellulose-stimulated expression. Using the promoter deletion approach and an appropriate reporter gene, the cis-acting region responsible for cellulose-stimulated transcription was localized between -241 and -72 bp relative to the TATA box. Deletion of this sequence did not affect the basal expression of the promoter, whereas deletion of 72 bp adjacent to the TATA box abolished basal expression of the cbh1 promoter. We therefore concluded that the cbh1 promoter is composed of two regulatory regions-one controls cellulose-induced transcription and the other is required for its basal expression.

Base Sequence↗
PubMed1999

Acid hydrolysis of bacterial cellulose reveals different modes of synergistic action between cellobiohydrolase I and endoglucanase I.

Intact and partially acid hydrolyzed cellulose from Acetobacter xylinum were used as model substrates for cellulose hydrolysis by 1,4-beta-D-glucan-cellobiohydrolase I (CBH I) and 1,4-beta-D-endoglucanase I (EG I) from Trichoderma reesei. A high synergy between CBH I and EG I in simultaneous action was observed with intact bacterial cellulose (BC), but this synergistic effect was rapidly reduced by acid pretreatment of the cellulose. Moreover, a distinct synergistic effect was observed upon sequential endo-exo action on BC, but not on bacterial microcrystalline cellulose (BMCC). A mechanism for endo-exo synergism on crystalline cellulose is proposed where the simultaneous action of the enzymes counteract the decrease of activity caused by undesirable changes in the cellulose surface microstructure.

Acetobacter↗
PubMed1997

Cellulase induction in Trichoderma reesei by cellulose requires its own basal expression.

The induction of cellulases by cellulose, an insoluble polymer, in the filamentous fungus Trichoderma reesei is puzzling. We previously proposed a mechanism that is based on the presence of low levels of cellulase in the uninduced fungus; this basal cellulase activity would digest cellulose-releasing oligosaccharides that could enter the cell and trigger expression of cellulases. We now present experiments that lend further support to this model. We show here that transcripts of two members of the cellulase system, cbh1 and egl1, are present in uninduced T. reesei cells. These transcripts are induced at least 1100-fold in the presence of cellulose. We also show that a construct containing the hygromycin B resistance-encoding gene driven by the cbh1 promoter confers hygromycin B resistance to T. reesei cells grown in the absence of cellulose. Moreover, cellulose-induced production of the cbh1 transcript was suppressed when antisense RNA against three members of the cellulase system was expressed in vivo. Experiments are presented indicating that extracellular cellulase activity is the rate-limiting event in induction of synthesis of the cellulase transcripts by cellulose. The results reveal a critical requirement for basal expression of the cellulase system for induction of synthesis of its own transcripts by cellulose.

Autoradiography↗
PubMed2004

Mechanism of cellobiose inhibition in cellulose hydrolysis by cellobiohydrolase.

An experimental study of cellobiose inhibition in cellulose hydrolysis by synergism of cellobiohydrolyse I and endoglucanase I is presented. Cellobiose is the structural unit of cellulose molecules and also the main product in enzymatic hydrolysis of cellulose. It has been identified that cellobiose can strongly inhibit hydrolysis reaction of cellulase, whereas it has no effect on the adsorption of cellulase on cellulose surface. The experimental data of FT-IR spectra, fluorescence spectrum and circular dichroism suggested that cellobiose can be combined with tryptophan residue located near the active site of cellobiohydrolase and then form steric hindrance, which prevents cellulose molecule chains from diffusing into active site of cellulase. In addition, the molecular conformation of cellobiohydrolase changes after cellobiose binding, which also causes most of the non-productive adsorption. Under these conditions, microfibrils cannot be separated from cellulose chains, thus further hydrolysis of cellulose can hardly proceed.

Carbohydrate Conformation↗
PubMed1982

Effects of oxidized cellulose and microfibrillar collagen on infection.

Topical hemostatic agents may be used to control bleeding from a variety of surgical sites. Oxidized cellulose (Surgicel), gelatin sponge (Gelfoam), and microfibrillar collagen (Avitene) are the hemostatic agents in widest use. Oxidized cellulose has previously been shown to be superior to gelatin sponge with respect to infection. Microfibrillar collagen has not been studied in this regard. Contamination of experimental wounds with an inoculum of 3.2 to 3.6 X 10(4) colony-forming units of Staphylococcus aureus did not produce any infection. The addition of 20 mg of oxidized cellulose to wounds that received the same level of bacterial contamination resulted in nine infected wounds of 20 (45%). When the wounds were treated with 20 mg of microfibrillar collagen prior to contamination, 18 of 20 (90%) developed infection. The observed difference between the two hemostatic agents was significant (P less than 0.008). When 5 and 10 mg of oxidized cellulose was added to experimentally contaminated wounds, infection did not ensue. The incidence of infection increased strikingly when the amount of oxidized cellulose employed was increased to 20 and 30 mg. No such dose effect was observed for microfibrillar collagen. Infection developed even when very small quantities of the agent were used. Both oxidized cellulose and microfibrillar collagen may promote infection. The present study, in which a subcutaneous wound model was used, suggests an advantage of oxidized cellulose as compared with microfibrillar collagen from the standpoint of infection. Further studies with these agents in other body sites seem warranted.

Animals↗
PubMed1999

Immobilization of recombinant heparinase I fused to cellulose-binding domain.

Immobilization of biologically active proteins is of great importance to research and industry. Cellulose is an attractive matrix and cellulose-binding domain (CBD) an excellent affinity tag protein for the purification and immobilization of many of these proteins. We constructed two vectors to enable the cloning and expression of proteins fused to the N- or C-terminus of CBD. Their usefulness was demonstrated by fusing the heparin-degrading protein heparinase I to CBD (CBD-HepI and HepI-CBD). The fusion proteins were over-expressed in Escherichia coli under the control of a T7 promoter and found to accumulate in inclusion bodies. The inclusion bodies were recovered by centrifugation, the proteins were refolded and recovered on a cellulose column. The bifunctional fusion protein retained its abilities to bind to cellulose and degrade heparin. C-terminal fusion of heparinase I to CBD was somewhat superior to N-terminal fusion: Although specific activities in solution were comparable, the latter exhibited impaired binding capacity to cellulose. CBD-HepI-cellulose bioreactor was operated continuously and degraded heparin for over 40 h without any significant loss of activity. By varying the flow rate, the mean molecular weight of the heparin oligosaccharide produced could be controlled. The molecular weight distribution profiles, obtained from heparin depolymerization by free heparinase I, free CBD-HepI, and cellulose-immobilized CBD-HepI, were compared. The profiles obtained by free heparinase I and CBD-HepI were indistinguishable, however, immobilized CBD-HepI produced much lower molecular weight fragments at the same percentage of depolymerization. Thus, CBD can be used for the efficient production of bioreactors, combining purification and immobilization into essentially a single step.

Bacterial Proteins↗
PubMedDate not supplied

Pulmonary and intraperitoneal inflammation induced by cellulose fibres.

The inflammatory effects of respirable cellulose fibres were studied in two short-term animal models: intraperitoneal injection in mice, and inhalation in rats. The mouse peritoneal cavity is particularly sensitive to fibrous compared to non-fibrous particles. Both cellulose fibres and the positive control fibre, crocidolite asbestos, were administered in doses ranging from 10(4) to 10(8) fibres and caused marked, dose-dependent recruitment of inflammatory cells to the mouse peritoneal cavity, which was highest 1 day following injection. Crocidolite was much more active than cellulose, despite the mass dose of cellulose being 66 times greater for an equivalent number of fibres. Crocidolite at the higher doses caused inflammation to persist through 7 days. For the inhalation study, rats were exposed daily, 5 days per week, to aerosols of cellulose dust for ca. 3 weeks at a concentration of 1000 fibres ml(-1). Inhalation exposure induced an early inflammatory response in rat lungs, as determined by bronchoalveolar lavage, which peaked at 1 day following the start of inhalation and thereafter declined, despite a further 13 days of exposure over a period of 18 calendar days. In vitro production of the pro-inflammatory cytokine tumour necrosis factor alpha (TNF-alpha) by lavaged alveolar macrophages was markedly depressed by the end of the exposure period in cellulose-exposed animals, compared to sham-exposed controls, and this effect was still present in rats that had been allowed to recover for 28 days beyond the end of exposure. We conclude that the cellulose material studied is less inflammogenic than crocidolite and that the extent of the inflammatory response within the lung appears to reduce with continued exposure over a 14-day period.

Administration, Inhalation↗
PubMed2002

Two-dimensional correlation spectroscopy and principal component analysis studies of temperature-dependent IR spectra of cotton-cellulose.

The FTIR spectra were measured for raw Uplands Sicala-V2 cotton fibers over a temperature range of 40-325 degrees C to explore the temperature-dependent changes in the hydrogen bonds of cellulose. These cotton-cellulose spectra exhibited complicated patterns in the 3800-2800 cm(-1) region and thus were analyzed by both the exploratory principal component analysis (PCA) and two-dimensional (2-D) correlation spectroscopy methods. The exploratory PCA showed that the spectra separate into two groups on the basis of thermal degradation of the cotton-cellulose and the consequent breakage of intersheet H-bonds present in its structure. Frequency variables, which strongly contributed to each principal component highlighted in its loadings plot, were linked to the frequencies assigned to vibrations of the OH groups involved in different kinds of H-bonds, as well as to vibrations of the CH groups. Deeper insights into reorganization of the temperature-dependent hydrogen bonding were obtained by 2-D correlation spectroscopy. Synchronous and asynchronous spectra were analyzed in the temperature ranges of 40 to 150 and 250 to 320 degrees C, the ranges indicated by PCA. Detailed band assignments of the OH stretching region and changes in the patterns of the hydrogen bonding network of the cotton-cellulose were proposed with the aid of the 2-D correlation spectroscopy analysis. Below 150 degrees C, distinctly different bands assigned to the less stable Ialpha and the more stable Ibeta interchain H-bonds O-6-H-6...O-3' were observed at about 3230 and 3270 cm(-1), respectively. Evaporation of water entrapped in the cellulose network was examined by means of the band at about 3610 cm(-1). The cooperativity of hydrogen bonds, which play a key role in the cellulose conformation, was monitored by frequencies assigned to intrachain H-bonds. It was possible to separate the frequencies assigned to the O-2-H-2...O-6 and O-3-H-3...O-5 intrachain H-bonds into two separate ranges, the spread of which was controlled by the cooperativity effect. The temperature dependence of the asynchronous spectra indicated that the less stable O-3-H-3...O-5 bonds gave rise to an absorption extending from 3300 to 3384 cm(-1), while the more stable O-2-H-2...O-6 bonds were characterized by the absorption between 3400 and 3470 cm(-1). The final breaking of the inter- and intrachain H-bonds, which occurs at the higher temperatures, was monitored by the asynchronous peaks at 3533 and 3590 cm(-1), respectively. On the basis of both the exploratory PCA and 2-D correlation spectroscopy investigations, it was possible to extract well-defined wavenumber ranges assigned to different kinds of intra- and interchain hydrogen bonds, as well as to the free OH groups of the cotton-cellulose.

Algorithms↗
PubMed2005

Adsorption of biopolymers at hydrophilic cellulose-water interface.

The extent of adsorption (Gamma2(1)) of bovine serum albumin (BSA), beta-lactoglobulin, lysozyme, gelatin, and DNA from aqueous solution onto the hydrophilic surface of cellulose has been measured as function of biopolymer concentration at different temperatures, pHs, and ionic strengths, and in the presence of a high concentration of inorganic salts and denaturants. In all cases, the value of Gamma2(1) increases with the increase of biopolymer concentration (X2) in bulk and it attains a maximum value at a critical mole fraction concentration X2m. The value of Gamma2m depends upon the nature of protein, temperature, pH, and ionic strength, as well as the nature of neutral salts present in excess. Gamma2m for proteins at a fixed physicochemical condition stands in the following order: Gelatin>betalactoglobulin>lysozyme>BSA. The isotherms for adsorption of DNA nucleotides on cellulose surface at pH 4.0 have been compared at different temperatures and ionic strengths, and in the presence of high concentration of inorganic salts LiCl, NaCl, KCl, and Na2SO4. Values of Gamma2m for different systems have been evaluated and critically compared. At pH 6.0 and 8.0, Gamma2(1) values of DNA nucleotides on cellulose are all negative due to the excess positive hydration of cellulose. At pH 4.0, adsorption of nucleotides of acid, alkali, and heat-denatured DNA widely differ from each other and in the presence of excess concentration of urea becomes negative. The probable mechanisms of biopolymer-cellulose adsorption in terms of polymer hydration, steric interaction, London-van der Waals, hydrophobic, and other types of interactions have been discussed qualitatively. The standard free energy change for the adsorption of protein and DNA nucleotides on the cellulose surface at the state of adsorption saturation has been calculated in kJ per kg of cellulose using an integrated form of the Gibbs adsorption equation. The relation between DeltaG degrees and maximum affinities between biopolymers and the polysaccharide interface have been discussed for various systems.

Adsorption↗
PubMed2001

Biohydrogen generation by mesophilic anaerobic fermentation of microcrystalline cellulose.

Sixteen batch experiments were performed to evaluate the stability, kinetics, and metabolic paths of heat-shocked digester (HSD) sludge that transforms microcrystalline cellulose into hydrogen. Highly reproducible kinetic and metabolic data confirmed that HSD sludge could stably convert microcrystalline cellulose to hydrogen and volatile fatty acids (VFA) and induce metabolic shift to produce alcohols. We concluded that clostridia predominated the hydrogen-producing bacteria in the HSD sludge. Throughout this study the hydrogen percentage in the headspace of the digesters was greater than 50% and no methanogenesis was observed. The results emphasize that hydrogen significantly inhibited the hydrogen-producing activity of sludge when initial microcrystalline cellulose concentrations exceeded 25.0 g/L. A further 25 batch experiments performed with full factorial design incorporating multivariate analysis suggested that the ability of the sludge to convert cellulose into hydrogen was influenced mainly by the ratio of initial cellulose concentration (So) to initial sludge density (Xo), but not by interaction between the variables. The hydrogen-producing activity depended highly on interaction of So x (So/Xo). Through response surface analysis it was found that a maximum hydrogen yield of 3.2 mmol/g cellulose occurred at So = 40 g/L and So/Xo = 8 g cellulose/g VSS. A high specific rate of 18 mmol/(g VSS-d) occurred at So = 28 g/L and So/Xo = 9 g cellulose/g VSS. These experimental results suggest that high hydrogen generation from cellulose was accompanied by low So/Xo.

Alcohols↗
PubMed2006

BSA treatment to enhance enzymatic hydrolysis of cellulose in lignin containing substrates.

Cellulase and bovine serum albumin (BSA) were added to Avicel cellulose and solids containing 56% cellulose and 28% lignin from dilute sulfuric acid pretreatment of corn stover. Little BSA was adsorbed on Avicel cellulose, while pretreated corn stover solids adsorbed considerable amounts of this protein. On the other hand, cellulase was highly adsorbed on both substrates. Adding a 1% concentration of BSA to dilute acid pretreated corn stover prior to enzyme addition at 15 FPU/g cellulose enhanced filter paper activity in solution by about a factor of 2 and beta-glucosidase activity in solution by about a factor of 14. Overall, these results suggested that BSA treatment reduced adsorption of cellulase and particularly beta-glucosidase on lignin. Of particular note, BSA treatment of pretreated corn stover solids prior to enzymatic hydrolysis increased 72 h glucose yields from about 82% to about 92% at a cellulase loading of 15 FPU/g cellulose or achieved about the same yield at a loading of 7.5 FPU/g cellulose. Similar improvements were also observed for enzymatic hydrolysis of ammonia fiber explosion (AFEX) pretreated corn stover and Douglas fir treated by SO(2) steam explosion and for simultaneous saccharification and fermentation (SSF) of BSA pretreated corn stover. In addition, BSA treatment prior to hydrolysis reduced the need for beta-glucosidase supplementation of SSF. The results are consistent with non-specific competitive, irreversible adsorption of BSA on lignin and identify promising strategies to reduce enzyme requirements for cellulose hydrolysis.

Adsorption↗
PubMed2006

Enhancement of cellulose saccharification kinetics using an ionic liquid pretreatment step.

Hydrolysis of cellulose to glucose in aqueous media catalyzed by the cellulase enzyme system suffers from slow reaction rates due in large part to the highly crystalline structure of cellulose and inaccessibility of enzyme adsorption sites. In this study, an attempt was made to disrupt the cellulose structure using the ionic liquid (IL), 1-n-butyl-3-methylimidazolium chloride, in a cellulose regeneration strategy which accelerated the subsequent hydrolysis reaction. ILs are a new class of non-volatile solvents that exhibit unique solvating properties. They can be tuned to dissolve a wide variety of compounds including cellulose. Because of their extremely low volatility, ILs are expected to have minimal environmental impact on air quality compared to most other volatile solvent systems. The initial enzymatic hydrolysis rates were approximately 50-fold higher for regenerated cellulose as compared to untreated cellulose (Avicel PH-101) as measured by a soluble reducing sugar assay.

Cellulose↗